From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: remove vhost_pmd_xstats_test plan
Date: Wed, 11 Mar 2020 05:00:19 +0000 [thread overview]
Message-ID: <20200311050019.8246-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
test_plans/vhost_pmd_xstats_test_plan.rst | 124 ----------------------
1 file changed, 124 deletions(-)
delete mode 100644 test_plans/vhost_pmd_xstats_test_plan.rst
diff --git a/test_plans/vhost_pmd_xstats_test_plan.rst b/test_plans/vhost_pmd_xstats_test_plan.rst
deleted file mode 100644
index 5ae1dd1..0000000
--- a/test_plans/vhost_pmd_xstats_test_plan.rst
+++ /dev/null
@@ -1,124 +0,0 @@
-.. Copyright (c) <2016-2017>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-======================
-Vhost PMD Xstats Tests
-======================
-
-This test plan will cover the basic vhost pmd xstats case and will be worked
-as a regression test plan. In the test plan, we will use vhost as a pmd port
-in testpmd.
-
-Test Case1: xstats based on packet size
-=======================================
-
-Flow::
-
- TG-->NIC-->>Vhost TX-->Virtio RX-->Virtio TX-->Vhost RX-->NIC-->TG
-
-1. Bind one physical port to igb_uio, then launch the testpmd
-
-2. Launch VM1 with using hugepage, 2048M memory, 2 cores,
- 1 sockets, 1 virtio-net-pci::
-
- taskset -c 6-7 qemu-system-x86_64 -name us-vhost-vm1 -cpu host -enable-kvm
- -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,
- share=on -numa node,memdev=mem -mem-prealloc -smp cores=2,sockets=1 -drive
- file=/home/osimg/ubuntu16.img -chardev socket,id=char0,path=./vhost-net
- -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1
- -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on
- -netdev tap,id=ipvm1,ifname=tap3,script=/etc/qemu-ifup -device rtl8139,
- netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -localtime -vnc :10 -daemonize
-
-3. On VM1, run testpmd
-
-4. On host, testpmd, set ports to the mac forward mode::
-
- testpmd>set fwd mac
- testpmd>start tx_first
-
-5. On VM, testpmd, set port to the mac forward mode::
-
- testpmd>set fwd mac
- testpmd>start
-
-6. On host run "show port xstats all" at least twice to check the packets number
-
-7. Let TG generate different size of packets, send 10000 packets for each packet
- sizes(64,128,255, 512, 1024, 1523), check the statistic number is correct
-
-8. On host run "clear port xstats all" , then all the statistic date should be 0
-
-Test Case2: xstats based on packet types
-========================================
-
-Similar as Test Case1, all steps are similar except step 6, 7:
-
-6. On host run "show port xstats all" at least twice to check the packets type:
-
-7. Let TG generate different type of packets, broadcast, multicast, ucast, check
- the statistic number is correct
-
-8. On host run "clear port xstats all" , then all the statistic date should be 0
-
-Test Case3: stability case with multiple queues
-===============================================
-
-1. No need bind any physical port to igb_uio,then launch the testpmd
-
-2. Launch VM1, set queues=2, vectors=2xqueues+2, mq=on, with using hugepage,
- 2048M memory, 2 cores, 1 sockets, 1 virtio-net-pci::
-
- taskset -c 6-7 qemu-system-x86_64 -name us-vhost-vm1 -cpu host -enable-kvm
- -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,\
- share=on -numa node,memdev=mem -mem-prealloc \
- -smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=1 \
- -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=off,mq=on \
- -netdev tap,id=ipvm1,ifname=tap3,script=/etc/qemu-ifup -device rtl8139,
- netdev=ipvm1,id=net0,mac=00:00:00:00:10:01 -localtime -vnc :10 -daemonize
-
-3. On VM1, run testpmd
-
-4. On host, testpmd, set ports to the mac forward mode::
-
- testpmd>set fwd io retry
- testpmd>start tx_first 8
-
-5. On VM, testpmd, set port to the mac forward mode::
-
- testpmd>start
-
-6. Send packets for 30 minutes, check the Xstats still can work correctly::
-
- testpmd>show port xstats all
--
2.17.1
next reply other threads:[~2020-03-11 12:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-11 5:00 Yinan [this message]
2020-03-13 6:55 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200311050019.8246-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).