* [dts] [PATCH V1 0/1] framework/pktgen: add actual line rate return for loss.
@ 2020-03-16 2:28 yufengmx
2020-03-16 2:28 ` [dts] [PATCH V1 1/1] " yufengmx
0 siblings, 1 reply; 7+ messages in thread
From: yufengmx @ 2020-03-16 2:28 UTC (permalink / raw)
To: dts, lijuan.tu, yingyax.han; +Cc: yufengmx
measure_rfc2544_dichotomy/loss rate add actual line rate return value.
v2:
- add result Null type check.
yufengmx (1):
framework/pktgen: add actual line rate return for loss.
framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++----------
1 file changed, 35 insertions(+), 12 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH V1 1/1] framework/pktgen: add actual line rate return for loss.
2020-03-16 2:28 [dts] [PATCH V1 0/1] framework/pktgen: add actual line rate return for loss yufengmx
@ 2020-03-16 2:28 ` yufengmx
2020-03-16 2:30 ` Tu, Lijuan
2020-03-20 8:04 ` Tu, Lijuan
0 siblings, 2 replies; 7+ messages in thread
From: yufengmx @ 2020-03-16 2:28 UTC (permalink / raw)
To: dts, lijuan.tu, yingyax.han; +Cc: yufengmx
measure_rfc2544_dichotomy/loss rate add actual line rate return value.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++----------
1 file changed, 35 insertions(+), 12 deletions(-)
diff --git a/framework/pktgen_base.py b/framework/pktgen_base.py
index 7e1ff48..049142f 100644
--- a/framework/pktgen_base.py
+++ b/framework/pktgen_base.py
@@ -263,6 +263,7 @@ class PacketGenerator(object):
"""
delay = options.get('delay')
duration = options.get('duration') or 10
+ throughput_stat_flag = options.get('throughput_stat_flag') or False
self._prepare_transmission(stream_ids=stream_ids)
# start warm up traffic
self.__warm_up_pktgen(stream_ids, options, delay)
@@ -270,6 +271,8 @@ class PacketGenerator(object):
self._start_transmission(stream_ids, options)
# keep traffic within a duration time
time.sleep(duration)
+ if throughput_stat_flag:
+ _throughput_stats = self.__get_single_throughput_statistic(stream_ids)
self._stop_transmission(None)
result = {}
used_rx_port = []
@@ -287,7 +290,10 @@ class PacketGenerator(object):
if loss_rate < 0:
loss_rate = 0
result[port_id] = (loss_rate, tx_pkts, rx_pkts)
- return result
+ if throughput_stat_flag:
+ return result, _throughput_stats
+ else:
+ return result
def measure_loss(self, stream_ids=[], options={}):
'''
@@ -491,6 +497,7 @@ class PacketGenerator(object):
accuracy = options.get('accuracy') or 0.001
permit_loss_rate = options.get('pdr') or 0.0
duration = options.get('duration') or 10.0
+ throughput_stat_flag = options.get('throughput_stat_flag') or False
# start warm up traffic
delay = options.get('delay')
_options = {'duration': duration}
@@ -505,10 +512,14 @@ class PacketGenerator(object):
traffic_rate_min = min_rate
while True:
# run loss rate testing
- _options = {'duration': duration}
+ _options = {
+ 'throughput_stat_flag': throughput_stat_flag,
+ 'duration': duration, }
result = self._measure_loss(stream_ids, _options)
loss_rate_table.append([rate, result])
- status = self._check_loss_rate(result, permit_loss_rate)
+ status = self._check_loss_rate(
+ result[0] if throughput_stat_flag else result,
+ permit_loss_rate)
# if upper bound rate percent hit, quit the left flow
if rate == max_rate and status:
hit_result = result
@@ -528,16 +539,28 @@ class PacketGenerator(object):
# set stream rate percent to custom value
self._set_stream_rate_percent(rate)
- if not hit_result:
- msg = ('expected permit loss rate <{0}> '
- 'not between rate {1} and rate {2}').format(
- permit_loss_rate, max_rate, min_rate)
- self.logger.error(msg)
- self.logger.info(pformat(loss_rate_table))
- ret_value = 0, result[0][1], result[0][2]
+ if throughput_stat_flag:
+ if not hit_result or not hit_result[0]:
+ msg = ('expected permit loss rate <{0}> '
+ 'not between rate {1} and rate {2}').format(
+ permit_loss_rate, max_rate, min_rate)
+ self.logger.error(msg)
+ self.logger.info(pformat(loss_rate_table))
+ ret_value = 0, result[0][0][1], result[0][0][2], 0
+ else:
+ self.logger.debug(pformat(loss_rate_table))
+ ret_value = rate, hit_result[0][0][1], hit_result[0][0][2], hit_result[1][1]
else:
- self.logger.debug(pformat(loss_rate_table))
- ret_value = rate, hit_result[0][1], hit_result[0][2]
+ if not hit_result:
+ msg = ('expected permit loss rate <{0}> '
+ 'not between rate {1} and rate {2}').format(
+ permit_loss_rate, max_rate, min_rate)
+ self.logger.error(msg)
+ self.logger.info(pformat(loss_rate_table))
+ ret_value = 0, result[0][1], result[0][2]
+ else:
+ self.logger.debug(pformat(loss_rate_table))
+ ret_value = rate, hit_result[0][1], hit_result[0][2]
self.logger.info("zero loss rate is %f" % rate)
return ret_value
--
2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1 1/1] framework/pktgen: add actual line rate return for loss.
2020-03-16 2:28 ` [dts] [PATCH V1 1/1] " yufengmx
@ 2020-03-16 2:30 ` Tu, Lijuan
2020-03-16 2:32 ` Mo, YufengX
2020-03-20 8:04 ` Tu, Lijuan
1 sibling, 1 reply; 7+ messages in thread
From: Tu, Lijuan @ 2020-03-16 2:30 UTC (permalink / raw)
To: Mo, YufengX, dts, Han, YingyaX
Is this the V2 ? sorry , I am confused by tag and another mail.
> -----Original Message-----
> From: Mo, YufengX
> Sent: Monday, March 16, 2020 10:29 AM
> To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com>; Han, YingyaX
> <yingyax.han@intel.com>
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V1 1/1] framework/pktgen: add actual line rate return
> for loss.
>
>
> measure_rfc2544_dichotomy/loss rate add actual line rate return value.
>
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
> framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++---------
> -
> 1 file changed, 35 insertions(+), 12 deletions(-)
>
> diff --git a/framework/pktgen_base.py b/framework/pktgen_base.py index
> 7e1ff48..049142f 100644
> --- a/framework/pktgen_base.py
> +++ b/framework/pktgen_base.py
> @@ -263,6 +263,7 @@ class PacketGenerator(object):
> """
> delay = options.get('delay')
> duration = options.get('duration') or 10
> + throughput_stat_flag = options.get('throughput_stat_flag') or
> + False
> self._prepare_transmission(stream_ids=stream_ids)
> # start warm up traffic
> self.__warm_up_pktgen(stream_ids, options, delay) @@ -270,6 +271,8
> @@ class PacketGenerator(object):
> self._start_transmission(stream_ids, options)
> # keep traffic within a duration time
> time.sleep(duration)
> + if throughput_stat_flag:
> + _throughput_stats =
> + self.__get_single_throughput_statistic(stream_ids)
> self._stop_transmission(None)
> result = {}
> used_rx_port = []
> @@ -287,7 +290,10 @@ class PacketGenerator(object):
> if loss_rate < 0:
> loss_rate = 0
> result[port_id] = (loss_rate, tx_pkts, rx_pkts)
> - return result
> + if throughput_stat_flag:
> + return result, _throughput_stats
> + else:
> + return result
>
> def measure_loss(self, stream_ids=[], options={}):
> '''
> @@ -491,6 +497,7 @@ class PacketGenerator(object):
> accuracy = options.get('accuracy') or 0.001
> permit_loss_rate = options.get('pdr') or 0.0
> duration = options.get('duration') or 10.0
> + throughput_stat_flag = options.get('throughput_stat_flag') or
> + False
> # start warm up traffic
> delay = options.get('delay')
> _options = {'duration': duration} @@ -505,10 +512,14 @@ class
> PacketGenerator(object):
> traffic_rate_min = min_rate
> while True:
> # run loss rate testing
> - _options = {'duration': duration}
> + _options = {
> + 'throughput_stat_flag': throughput_stat_flag,
> + 'duration': duration, }
> result = self._measure_loss(stream_ids, _options)
> loss_rate_table.append([rate, result])
> - status = self._check_loss_rate(result, permit_loss_rate)
> + status = self._check_loss_rate(
> + result[0] if throughput_stat_flag else result,
> + permit_loss_rate)
> # if upper bound rate percent hit, quit the left flow
> if rate == max_rate and status:
> hit_result = result
> @@ -528,16 +539,28 @@ class PacketGenerator(object):
> # set stream rate percent to custom value
> self._set_stream_rate_percent(rate)
>
> - if not hit_result:
> - msg = ('expected permit loss rate <{0}> '
> - 'not between rate {1} and rate {2}').format(
> - permit_loss_rate, max_rate, min_rate)
> - self.logger.error(msg)
> - self.logger.info(pformat(loss_rate_table))
> - ret_value = 0, result[0][1], result[0][2]
> + if throughput_stat_flag:
> + if not hit_result or not hit_result[0]:
> + msg = ('expected permit loss rate <{0}> '
> + 'not between rate {1} and rate {2}').format(
> + permit_loss_rate, max_rate, min_rate)
> + self.logger.error(msg)
> + self.logger.info(pformat(loss_rate_table))
> + ret_value = 0, result[0][0][1], result[0][0][2], 0
> + else:
> + self.logger.debug(pformat(loss_rate_table))
> + ret_value = rate, hit_result[0][0][1],
> + hit_result[0][0][2], hit_result[1][1]
> else:
> - self.logger.debug(pformat(loss_rate_table))
> - ret_value = rate, hit_result[0][1], hit_result[0][2]
> + if not hit_result:
> + msg = ('expected permit loss rate <{0}> '
> + 'not between rate {1} and rate {2}').format(
> + permit_loss_rate, max_rate, min_rate)
> + self.logger.error(msg)
> + self.logger.info(pformat(loss_rate_table))
> + ret_value = 0, result[0][1], result[0][2]
> + else:
> + self.logger.debug(pformat(loss_rate_table))
> + ret_value = rate, hit_result[0][1], hit_result[0][2]
> self.logger.info("zero loss rate is %f" % rate)
>
> return ret_value
> --
> 2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1 1/1] framework/pktgen: add actual line rate return for loss.
2020-03-16 2:30 ` Tu, Lijuan
@ 2020-03-16 2:32 ` Mo, YufengX
0 siblings, 0 replies; 7+ messages in thread
From: Mo, YufengX @ 2020-03-16 2:32 UTC (permalink / raw)
To: Tu, Lijuan, dts, Han, YingyaX
Yes, I forgot to change tag.
> -----Original Message-----
> From: Tu, Lijuan
> Sent: Monday, March 16, 2020 10:31 AM
> To: Mo, YufengX <yufengx.mo@intel.com>; dts@dpdk.org; Han, YingyaX <yingyax.han@intel.com>
> Subject: RE: [dts][PATCH V1 1/1] framework/pktgen: add actual line rate return for loss.
>
> Is this the V2 ? sorry , I am confused by tag and another mail.
>
> > -----Original Message-----
> > From: Mo, YufengX
> > Sent: Monday, March 16, 2020 10:29 AM
> > To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com>; Han, YingyaX
> > <yingyax.han@intel.com>
> > Cc: Mo, YufengX <yufengx.mo@intel.com>
> > Subject: [dts][PATCH V1 1/1] framework/pktgen: add actual line rate return
> > for loss.
> >
> >
> > measure_rfc2544_dichotomy/loss rate add actual line rate return value.
> >
> > Signed-off-by: yufengmx <yufengx.mo@intel.com>
> > ---
> > framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++---------
> > -
> > 1 file changed, 35 insertions(+), 12 deletions(-)
> >
> > diff --git a/framework/pktgen_base.py b/framework/pktgen_base.py index
> > 7e1ff48..049142f 100644
> > --- a/framework/pktgen_base.py
> > +++ b/framework/pktgen_base.py
> > @@ -263,6 +263,7 @@ class PacketGenerator(object):
> > """
> > delay = options.get('delay')
> > duration = options.get('duration') or 10
> > + throughput_stat_flag = options.get('throughput_stat_flag') or
> > + False
> > self._prepare_transmission(stream_ids=stream_ids)
> > # start warm up traffic
> > self.__warm_up_pktgen(stream_ids, options, delay) @@ -270,6 +271,8
> > @@ class PacketGenerator(object):
> > self._start_transmission(stream_ids, options)
> > # keep traffic within a duration time
> > time.sleep(duration)
> > + if throughput_stat_flag:
> > + _throughput_stats =
> > + self.__get_single_throughput_statistic(stream_ids)
> > self._stop_transmission(None)
> > result = {}
> > used_rx_port = []
> > @@ -287,7 +290,10 @@ class PacketGenerator(object):
> > if loss_rate < 0:
> > loss_rate = 0
> > result[port_id] = (loss_rate, tx_pkts, rx_pkts)
> > - return result
> > + if throughput_stat_flag:
> > + return result, _throughput_stats
> > + else:
> > + return result
> >
> > def measure_loss(self, stream_ids=[], options={}):
> > '''
> > @@ -491,6 +497,7 @@ class PacketGenerator(object):
> > accuracy = options.get('accuracy') or 0.001
> > permit_loss_rate = options.get('pdr') or 0.0
> > duration = options.get('duration') or 10.0
> > + throughput_stat_flag = options.get('throughput_stat_flag') or
> > + False
> > # start warm up traffic
> > delay = options.get('delay')
> > _options = {'duration': duration} @@ -505,10 +512,14 @@ class
> > PacketGenerator(object):
> > traffic_rate_min = min_rate
> > while True:
> > # run loss rate testing
> > - _options = {'duration': duration}
> > + _options = {
> > + 'throughput_stat_flag': throughput_stat_flag,
> > + 'duration': duration, }
> > result = self._measure_loss(stream_ids, _options)
> > loss_rate_table.append([rate, result])
> > - status = self._check_loss_rate(result, permit_loss_rate)
> > + status = self._check_loss_rate(
> > + result[0] if throughput_stat_flag else result,
> > + permit_loss_rate)
> > # if upper bound rate percent hit, quit the left flow
> > if rate == max_rate and status:
> > hit_result = result
> > @@ -528,16 +539,28 @@ class PacketGenerator(object):
> > # set stream rate percent to custom value
> > self._set_stream_rate_percent(rate)
> >
> > - if not hit_result:
> > - msg = ('expected permit loss rate <{0}> '
> > - 'not between rate {1} and rate {2}').format(
> > - permit_loss_rate, max_rate, min_rate)
> > - self.logger.error(msg)
> > - self.logger.info(pformat(loss_rate_table))
> > - ret_value = 0, result[0][1], result[0][2]
> > + if throughput_stat_flag:
> > + if not hit_result or not hit_result[0]:
> > + msg = ('expected permit loss rate <{0}> '
> > + 'not between rate {1} and rate {2}').format(
> > + permit_loss_rate, max_rate, min_rate)
> > + self.logger.error(msg)
> > + self.logger.info(pformat(loss_rate_table))
> > + ret_value = 0, result[0][0][1], result[0][0][2], 0
> > + else:
> > + self.logger.debug(pformat(loss_rate_table))
> > + ret_value = rate, hit_result[0][0][1],
> > + hit_result[0][0][2], hit_result[1][1]
> > else:
> > - self.logger.debug(pformat(loss_rate_table))
> > - ret_value = rate, hit_result[0][1], hit_result[0][2]
> > + if not hit_result:
> > + msg = ('expected permit loss rate <{0}> '
> > + 'not between rate {1} and rate {2}').format(
> > + permit_loss_rate, max_rate, min_rate)
> > + self.logger.error(msg)
> > + self.logger.info(pformat(loss_rate_table))
> > + ret_value = 0, result[0][1], result[0][2]
> > + else:
> > + self.logger.debug(pformat(loss_rate_table))
> > + ret_value = rate, hit_result[0][1], hit_result[0][2]
> > self.logger.info("zero loss rate is %f" % rate)
> >
> > return ret_value
> > --
> > 2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1 1/1] framework/pktgen: add actual line rate return for loss.
2020-03-16 2:28 ` [dts] [PATCH V1 1/1] " yufengmx
2020-03-16 2:30 ` Tu, Lijuan
@ 2020-03-20 8:04 ` Tu, Lijuan
1 sibling, 0 replies; 7+ messages in thread
From: Tu, Lijuan @ 2020-03-20 8:04 UTC (permalink / raw)
To: Mo, YufengX, dts, Han, YingyaX
Applied, thanks
> -----Original Message-----
> From: Mo, YufengX
> Sent: Monday, March 16, 2020 10:29 AM
> To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com>; Han, YingyaX
> <yingyax.han@intel.com>
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V1 1/1] framework/pktgen: add actual line rate return
> for loss.
>
>
> measure_rfc2544_dichotomy/loss rate add actual line rate return value.
>
> Signed-off-by: yufengmx <yufengx.mo@intel.com>
> ---
> framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++---------
> -
> 1 file changed, 35 insertions(+), 12 deletions(-)
>
> diff --git a/framework/pktgen_base.py b/framework/pktgen_base.py index
> 7e1ff48..049142f 100644
> --- a/framework/pktgen_base.py
> +++ b/framework/pktgen_base.py
> @@ -263,6 +263,7 @@ class PacketGenerator(object):
> """
> delay = options.get('delay')
> duration = options.get('duration') or 10
> + throughput_stat_flag = options.get('throughput_stat_flag') or
> + False
> self._prepare_transmission(stream_ids=stream_ids)
> # start warm up traffic
> self.__warm_up_pktgen(stream_ids, options, delay) @@ -270,6 +271,8
> @@ class PacketGenerator(object):
> self._start_transmission(stream_ids, options)
> # keep traffic within a duration time
> time.sleep(duration)
> + if throughput_stat_flag:
> + _throughput_stats =
> + self.__get_single_throughput_statistic(stream_ids)
> self._stop_transmission(None)
> result = {}
> used_rx_port = []
> @@ -287,7 +290,10 @@ class PacketGenerator(object):
> if loss_rate < 0:
> loss_rate = 0
> result[port_id] = (loss_rate, tx_pkts, rx_pkts)
> - return result
> + if throughput_stat_flag:
> + return result, _throughput_stats
> + else:
> + return result
>
> def measure_loss(self, stream_ids=[], options={}):
> '''
> @@ -491,6 +497,7 @@ class PacketGenerator(object):
> accuracy = options.get('accuracy') or 0.001
> permit_loss_rate = options.get('pdr') or 0.0
> duration = options.get('duration') or 10.0
> + throughput_stat_flag = options.get('throughput_stat_flag') or
> + False
> # start warm up traffic
> delay = options.get('delay')
> _options = {'duration': duration} @@ -505,10 +512,14 @@ class
> PacketGenerator(object):
> traffic_rate_min = min_rate
> while True:
> # run loss rate testing
> - _options = {'duration': duration}
> + _options = {
> + 'throughput_stat_flag': throughput_stat_flag,
> + 'duration': duration, }
> result = self._measure_loss(stream_ids, _options)
> loss_rate_table.append([rate, result])
> - status = self._check_loss_rate(result, permit_loss_rate)
> + status = self._check_loss_rate(
> + result[0] if throughput_stat_flag else result,
> + permit_loss_rate)
> # if upper bound rate percent hit, quit the left flow
> if rate == max_rate and status:
> hit_result = result
> @@ -528,16 +539,28 @@ class PacketGenerator(object):
> # set stream rate percent to custom value
> self._set_stream_rate_percent(rate)
>
> - if not hit_result:
> - msg = ('expected permit loss rate <{0}> '
> - 'not between rate {1} and rate {2}').format(
> - permit_loss_rate, max_rate, min_rate)
> - self.logger.error(msg)
> - self.logger.info(pformat(loss_rate_table))
> - ret_value = 0, result[0][1], result[0][2]
> + if throughput_stat_flag:
> + if not hit_result or not hit_result[0]:
> + msg = ('expected permit loss rate <{0}> '
> + 'not between rate {1} and rate {2}').format(
> + permit_loss_rate, max_rate, min_rate)
> + self.logger.error(msg)
> + self.logger.info(pformat(loss_rate_table))
> + ret_value = 0, result[0][0][1], result[0][0][2], 0
> + else:
> + self.logger.debug(pformat(loss_rate_table))
> + ret_value = rate, hit_result[0][0][1],
> + hit_result[0][0][2], hit_result[1][1]
> else:
> - self.logger.debug(pformat(loss_rate_table))
> - ret_value = rate, hit_result[0][1], hit_result[0][2]
> + if not hit_result:
> + msg = ('expected permit loss rate <{0}> '
> + 'not between rate {1} and rate {2}').format(
> + permit_loss_rate, max_rate, min_rate)
> + self.logger.error(msg)
> + self.logger.info(pformat(loss_rate_table))
> + ret_value = 0, result[0][1], result[0][2]
> + else:
> + self.logger.debug(pformat(loss_rate_table))
> + ret_value = rate, hit_result[0][1], hit_result[0][2]
> self.logger.info("zero loss rate is %f" % rate)
>
> return ret_value
> --
> 2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1 0/1] framework/pktgen: add actual line rate return for loss.
2020-03-13 8:27 [dts] [PATCH V1 0/1] " yufengmx
@ 2020-03-16 2:25 ` Mo, YufengX
0 siblings, 0 replies; 7+ messages in thread
From: Mo, YufengX @ 2020-03-16 2:25 UTC (permalink / raw)
To: dts, Tu, Lijuan, Han, YingyaX
Ignore this version. Version 2 upstreamed.
> -----Original Message-----
> From: Mo, YufengX
> Sent: Friday, March 13, 2020 4:27 PM
> To: dts@dpdk.org; Tu, Lijuan <lijuan.tu@intel.com>; Han, YingyaX <yingyax.han@intel.com>
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V1 0/1] framework/pktgen: add actual line rate return for loss.
>
> measure_rfc2544_dichotomy/loss rate add actual line rate return value.
>
> yufengmx (1):
> framework/pktgen: add actual line rate return for loss.
>
> framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++----------
> 1 file changed, 35 insertions(+), 12 deletions(-)
>
> --
> 2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
* [dts] [PATCH V1 0/1] framework/pktgen: add actual line rate return for loss.
@ 2020-03-13 8:27 yufengmx
2020-03-16 2:25 ` Mo, YufengX
0 siblings, 1 reply; 7+ messages in thread
From: yufengmx @ 2020-03-13 8:27 UTC (permalink / raw)
To: dts, lijuan.tu, yingyax.han; +Cc: yufengmx
measure_rfc2544_dichotomy/loss rate add actual line rate return value.
yufengmx (1):
framework/pktgen: add actual line rate return for loss.
framework/pktgen_base.py | 47 ++++++++++++++++++++++++++++++----------
1 file changed, 35 insertions(+), 12 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-03-20 8:04 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-16 2:28 [dts] [PATCH V1 0/1] framework/pktgen: add actual line rate return for loss yufengmx
2020-03-16 2:28 ` [dts] [PATCH V1 1/1] " yufengmx
2020-03-16 2:30 ` Tu, Lijuan
2020-03-16 2:32 ` Mo, YufengX
2020-03-20 8:04 ` Tu, Lijuan
-- strict thread matches above, loose matches on Subject: below --
2020-03-13 8:27 [dts] [PATCH V1 0/1] " yufengmx
2020-03-16 2:25 ` Mo, YufengX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).