From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add packed ring vectorized path cases for three topology of pvp_multi_paths performance test
Date: Thu, 2 Apr 2020 15:39:48 +0000 [thread overview]
Message-ID: <20200402153948.54759-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../pvp_multi_paths_performance_test_plan.rst | 43 +++++++++--
...host_single_core_performance_test_plan.rst | 77 ++++++++++++-------
...rtio_single_core_performance_test_plan.rst | 41 +++++++---
3 files changed, 117 insertions(+), 44 deletions(-)
diff --git a/test_plans/pvp_multi_paths_performance_test_plan.rst b/test_plans/pvp_multi_paths_performance_test_plan.rst
index 9da51ba..bbb7d0e 100644
--- a/test_plans/pvp_multi_paths_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_performance_test_plan.rst
@@ -34,11 +34,15 @@
vhost/virtio pvp multi-paths performance test plan
==================================================
-Benchmark PVP multi-paths performance with 9 tx/rx paths.
-Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
-inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
-virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
+Benchmark PVP multi-paths performance with 10 tx/rx paths. Includes mergeable, non-mergeable, vectorized_rx,
+inorder mergeable, inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，virtio 1.1 inorder
+mergeable, virtio 1.1 inorder non-mergeable, virtio1.1 vectorized path.
Give 1 core for vhost and virtio respectively.
+Note: Virtio 1.1 vectorized path need below three initial requirements:
+ 1. AVX512 is allowed in config file and supported by compiler
+ 2. Host cpu support AVX512F
+ 3. ring size is power of two
+
Test flow
=========
@@ -195,8 +199,8 @@ Test Case 6: pvp test with non-mergeable path
testpmd>show port stats all
-Test Case 7: pvp test with vector_rx path
-=========================================
+Test Case 7: pvp test with vectorized_rx path
+=============================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -251,17 +255,40 @@ Test Case 9: pvp test with virtio 1.1 inorder non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-3 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rx-offloads=0x10 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+
+ testpmd>show port stats all
+
+Test Case 10: pvp test with virtio 1.1 vectorized path
+======================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-3 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
2. Launch virtio-user by below command::
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
diff --git a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
index 92c0d60..e56bec6 100644
--- a/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_vhost_single_core_performance_test_plan.rst
@@ -34,12 +34,14 @@
vhost/virtio pvp multi-paths vhost single core test plan
========================================================
-Benchmark PVP vhost single core performance with 9 tx/rx paths.
-Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
-inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
-virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
-Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side
-to lower the virtio workload.
+Benchmark PVP virtio single core performance with 10 tx/rx paths. Includes mergeable, non-mergeable, vectorized_rx,
+inorder mergeable, inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，virtio 1.1 inorder
+mergeable, virtio 1.1 inorder non-mergeable, virtio1.1 vectorized path.
+Give 2 cores for virtio and 1 core for vhost, set io fwd at virtio side to lower the virtio workload.
+Note: Virtio 1.1 vectorizedized path need below three initial requirements:
+ 1. AVX512 is allowed in config file and supported by compiler
+ 2. Host cpu support AVX512F
+ 3. ring size is power of two
Test flow
=========
@@ -52,14 +54,14 @@ Test Case 1: vhost single core performance test with virtio 1.1 mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -73,14 +75,14 @@ Test Case 2: vhost single core performance test with virtio 1.1 non-mergeable pa
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -94,14 +96,14 @@ Test Case 3: vhost single core performance test with inorder mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --legacy-mem --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -115,14 +117,14 @@ Test Case 4: vhost single core performance test with inorder non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -136,14 +138,14 @@ Test Case 5: vhost single core performance test with mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -157,14 +159,14 @@ Test Case 6: vhost single core performance test with non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -172,20 +174,20 @@ Test Case 6: vhost single core performance test with non-mergeable path
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 7: vhost single core performance test with vector_rx path
-===================================================================
+Test Case 7: vhost single core performance test with vectorized_rx path
+=======================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -199,14 +201,14 @@ Test Case 8: vhost single core performance test with virtio 1.1 inorder mergeabl
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -217,6 +219,27 @@ Test Case 8: vhost single core performance test with virtio 1.1 inorder mergeabl
Test Case 9: vhost single core performance test with virtio 1.1 inorder non-mergeable path
==========================================================================================
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rx-offloads=0x10 --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ >set fwd io
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 10: vhost single core performance test with virtio 1.1 vectorized path
+=============================================================================
+
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
@@ -227,9 +250,9 @@ Test Case 9: vhost single core performance test with virtio 1.1 inorder non-merg
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
- --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
+ --vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
>start
diff --git a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
index 990c18a..596d1e9 100644
--- a/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
+++ b/test_plans/pvp_multi_paths_virtio_single_core_performance_test_plan.rst
@@ -34,12 +34,14 @@
vhost/virtio pvp multi-paths virtio single core test plan
=========================================================
-Benchmark pvp virtio single core performance with 9 tx/rx paths.
-Includes mergeable, non-mergeable, vector_rx, inorder mergeable,
-inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，
-virtio 1.1 inorder mergeable, virtio 1.1 inorder non-mergeable path.
-Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side
-to lower the vhost workload.
+Benchmark PVP virtio single core performance with 10 tx/rx paths. Includes mergeable, non-mergeable, vectorized_rx,
+inorder mergeable, inorder non-mergeable, virtio 1.1 mergeable, virtio 1.1 non-mergeable，virtio 1.1 inorder
+mergeable, virtio 1.1 inorder non-mergeable, virtio1.1 vectorized path.
+Give 2 cores for vhost and 1 core for virtio, set io fwd at vhost side to lower the vhost workload.
+Note: Virtio 1.1 vectorizedized path need below three initial requirements:
+ 1. AVX512 is allowed in config file and supported by compiler
+ 2. Host cpu support AVX512F
+ 3. ring size is power of two
Test flow
=========
@@ -178,7 +180,7 @@ Test Case 6: virtio single core performance test with non-mergeable path
3. Send packet with packet generator with different packet size, check the throughput.
-Test Case 7: virtio single core performance test with vector_rx path
+Test Case 7: virtio single core performance test with vectorized_rx path
====================================================================
1. Bind one port to igb_uio, then launch vhost by below command::
@@ -237,8 +239,29 @@ Test Case 9: virtio single core performance test with virtio 1.1 inorder non-mer
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rx-offloads=0x10 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ >set fwd mac
+ >start
+
+3. Send packet with packet generator with different packet size, check the throughput.
+
+Test Case 10: virtio single core performance test with virtio 1.1 vectorized path
+=============================================================================
+
+1. Bind one port to igb_uio, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -n 4 -l 2-4 --no-pci \
+ --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>set fwd io
+ testpmd>start
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
--
2.17.1
next reply other threads:[~2020-04-02 7:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 15:39 Yinan [this message]
2020-04-20 2:17 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200402153948.54759-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).