From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: add packed ring vectorized path case for loopback_multi_queues test
Date: Thu, 9 Apr 2020 20:29:42 +0000 [thread overview]
Message-ID: <20200409202942.93992-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../loopback_multi_queues_test_plan.rst | 75 +++++++++++++++++--
1 file changed, 70 insertions(+), 5 deletions(-)
diff --git a/test_plans/loopback_multi_queues_test_plan.rst b/test_plans/loopback_multi_queues_test_plan.rst
index 75cfd8d..e890b30 100644
--- a/test_plans/loopback_multi_queues_test_plan.rst
+++ b/test_plans/loopback_multi_queues_test_plan.rst
@@ -34,7 +34,14 @@
vhost/virtio-user loopback with multi-queues test plan
======================================================
-This test plan test vhost/virtio-user loopback multi-queues with split virtqueue and packed virtqueue different rx/tx paths, includes split virtqueue in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test, and packed virtqueue in-order mergeable, in-order non-mergeable, mergeable, non-mergeable path. And virtio-user support 8 queues in maximum, check performance could be linear growth when enable 8 queues and 8 cores, notice cores should in same socket.
+This test plan test loopback multi-queues with split virtqueue mergeable, non-mergeable, vectorized_rx,
+inorder mergeable, inorder non-mergeable path, and packed virtqueue mergeable, non-mergeable，inorder mergeable,
+inorder non-mergeable, vectorized path. And virtio-user support 8 queues in maximum, check performance could be
+linear growth when enable 8 queues and 8 cores, notice cores should in same socket.
+Note: Packed virtqueue vectorized path need below three initial requirements:
+ 1. AVX512 is allowed in config file and supported by compiler
+ 2. Host cpu support AVX512F
+ 3. ring size is power of two
Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
===============================================================================
@@ -502,7 +509,7 @@ Test Case 8: loopback with virtio 1.1 inorder mergeable path using 1 queue and 8
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -522,7 +529,65 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ -i --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+2. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+3. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+4. Get throughput 10 times and calculate the average throughput::
+
+ testpmd>show port stats all
+
+5. Check each RX/TX queue has packets, then quit testpmd::
+
+ testpmd>stop
+ testpmd>quit
+
+6. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-9 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
+ -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+
+7. Launch virtio-user by below command::
+
+ ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
+ --legacy-mem --no-pci --file-prefix=virtio \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ -- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd mac
+ testpmd>start
+
+8. Send packets with vhost-testpmd,[frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
+
+ testpmd>set txpkts [frame_size]
+ testpmd>start tx_first 32
+
+9. Get throughput 10 times and calculate the average throughput，check the throughput of 8 queues is eight times of 1 queue::
+
+ testpmd>show port stats all
+
+Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queues
+=================================================================================
+
+1. Launch testpmd by below command::
+
+ rm -rf vhost-net*
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -531,7 +596,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -562,7 +627,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
--
2.17.1
next reply other threads:[~2020-04-09 12:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-09 20:29 Yinan [this message]
2020-04-20 2:17 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200409202942.93992-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).