From: Yinan <yinan.wang@intel.com>
To: dts@dpdk.org
Cc: Wang Yinan <yinan.wang@intel.com>
Subject: [dts] [PATCH v1] test_plans: update test commonds for vectorized cases in loopback_multi_queues_test_plan.rst
Date: Wed, 29 Apr 2020 22:14:39 +0000 [thread overview]
Message-ID: <20200429221439.27896-1-yinan.wang@intel.com> (raw)
From: Wang Yinan <yinan.wang@intel.com>
Signed-off-by: Wang Yinan <yinan.wang@intel.com>
---
.../loopback_multi_queues_test_plan.rst | 20 ++++++++-----------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/test_plans/loopback_multi_queues_test_plan.rst b/test_plans/loopback_multi_queues_test_plan.rst
index e890b30..635b070 100644
--- a/test_plans/loopback_multi_queues_test_plan.rst
+++ b/test_plans/loopback_multi_queues_test_plan.rst
@@ -38,10 +38,6 @@ This test plan test loopback multi-queues with split virtqueue mergeable, non-me
inorder mergeable, inorder non-mergeable path, and packed virtqueue mergeable, non-mergeable，inorder mergeable,
inorder non-mergeable, vectorized path. And virtio-user support 8 queues in maximum, check performance could be
linear growth when enable 8 queues and 8 cores, notice cores should in same socket.
-Note: Packed virtqueue vectorized path need below three initial requirements:
- 1. AVX512 is allowed in config file and supported by compiler
- 2. Host cpu support AVX512F
- 3. ring size is power of two
Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
===============================================================================
@@ -358,7 +354,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -389,7 +385,7 @@ Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -418,7 +414,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -449,7 +445,7 @@ Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -537,7 +533,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -567,7 +563,7 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -596,7 +592,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -627,7 +623,7 @@ Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
--
2.17.1
next reply other threads:[~2020-04-30 5:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-29 22:14 Yinan [this message]
2020-05-06 3:25 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200429221439.27896-1-yinan.wang@intel.com \
--to=yinan.wang@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).