* [dts] [PATCH V2 0/1] l3fwd: update json and display
@ 2020-07-31 8:05 yufengmx
2020-07-31 8:05 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx
0 siblings, 1 reply; 6+ messages in thread
From: yufengmx @ 2020-07-31 8:05 UTC (permalink / raw)
To: dts; +Cc: yufengmx
update json and display.
v4:
- rebase source code
v3:
- change Actual line rate (Mpps) --> Actual Throughput (Mpps).
v2:
- update rfc2544 json and display.
v1:
- update throughput delta, Throughput delta = run value - expected value
yufengmx (1):
l3fwd: update rfc2544/throughput json and display
tests/l3fwd_base.py | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput json and display
2020-07-31 8:05 [dts] [PATCH V2 0/1] l3fwd: update json and display yufengmx
@ 2020-07-31 8:05 ` yufengmx
0 siblings, 0 replies; 6+ messages in thread
From: yufengmx @ 2020-07-31 8:05 UTC (permalink / raw)
To: dts; +Cc: yufengmx
update rfc2544/throughput json and display.
Signed-off-by: yufengmx <yufengx.mo@intel.com>
---
tests/l3fwd_base.py | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/tests/l3fwd_base.py b/tests/l3fwd_base.py
index a6e26b0..6eddde0 100644
--- a/tests/l3fwd_base.py
+++ b/tests/l3fwd_base.py
@@ -827,11 +827,12 @@ class L3fwdBase(object):
expected, pps, round(gap, 2))
self.logger.error(msg)
else:
+ expected = pps
msg = ('{0} {1} expected throughput value is not set, '
'ignore check').format(config, frame_size)
self.logger.warning(msg)
status = 'pass'
- js_results.append([status, [pps, linerate - pps], percentage, config, frame_size])
+ js_results.append([status, [pps, pps - expected], percentage, config, frame_size])
# save data with json format
self.__save_throughput_result(self.__cur_case, js_results)
# display result table
@@ -861,6 +862,7 @@ class L3fwdBase(object):
self.__cur_case, {}).get(self.__nic_name, {}).get(
config, {}).get(str(frame_size), {})
zero_loss_rate, tx_pkts, rx_pkts, pps = result if result else [None] * 3
+ zero_loss_rate = zero_loss_rate or 0
mpps = pps / 1000000.0
# expected line rate
_frame_size = self.__get_frame_size(stm_name, frame_size)
@@ -880,22 +882,32 @@ class L3fwdBase(object):
])
# check data with expected values
expected_rate = float(expected_cfg.get('rate') or 100.0)
+ gap = 100 * (zero_loss_rate - expected_rate) / expected_rate
status = 'pass' \
- if zero_loss_rate and zero_loss_rate > expected_rate \
+ if abs(gap) < bias \
else 'failed'
js_results.append(
[status,
- [mpps, linerate - mpps], actual_rate_percent,
+ [mpps, zero_loss_rate - expected_rate], actual_rate_percent,
config, frame_size])
# save data in json file
self.__save_rfc2544_result(self.__cur_case, js_results)
# display result table
+ # Total Cores/Threads/Queues per port
+ # Frame Size
+ # Mode: LPM/EM
+ # Expected LineRate % : which config in l3fwd_lpm_ipv4_rfc2544.cfg
+ # Actual LineRate % : actual run zero loss rate
+ # Expected Throughput (Mpps) : Max linerate throughput value * 'Expected LineRate %'
+ # Actual Throughput (Mpps) : actual run throughput value on the zero loss rate
+ # tx_pkts : send pkts num
+ # rx_pkts : received pkts num
title = [
'Total Cores/Threads/Queues per port',
"Frame Size",
"Mode",
'Expected Throughput (Mpps)',
- 'Actual line rate (Mpps) ',
+ 'Actual Throughput (Mpps) ',
'{} Mode config line rate % '.format(mode.upper()),
'{} Mode actual line rate % '.format(mode.upper()),
'tx_pkts',
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dts] [PATCH V2 0/1] l3fwd: update json and display
2020-07-31 7:58 yufengmx
@ 2020-07-31 8:08 ` Mo, YufengX
0 siblings, 0 replies; 6+ messages in thread
From: Mo, YufengX @ 2020-07-31 8:08 UTC (permalink / raw)
To: dts
Ignore this version 3 patch.
> -----Original Message-----
> From: Mo, YufengX
> Sent: Friday, July 31, 2020 3:58 PM
> To: dts@dpdk.org
> Cc: Mo, YufengX <yufengx.mo@intel.com>
> Subject: [dts][PATCH V2 0/1] l3fwd: update json and display
>
> update json and display.
>
>
> v3:
> - change Actual line rate (Mpps) --> Actual Throughput (Mpps).
>
> v2:
> - update rfc2544 json and display.
>
> v1:
> - update throughput delta, Throughput delta = run value - expected value
>
> yufengmx (1):
> l3fwd: update rfc2544/throughput json and display
>
> tests/l3fwd_base.py | 18 +++++++++++++++---
> 1 file changed, 15 insertions(+), 3 deletions(-)
>
> --
> 2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V2 0/1] l3fwd: update json and display
@ 2020-07-31 8:05 yufengmx
0 siblings, 0 replies; 6+ messages in thread
From: yufengmx @ 2020-07-31 8:05 UTC (permalink / raw)
To: dts; +Cc: yufengmx
update json and display.
v4:
- rebase source code
v3:
- change Actual line rate (Mpps) --> Actual Throughput (Mpps).
v2:
- update rfc2544 json and display.
v1:
- update throughput delta, Throughput delta = run value - expected value
yufengmx (1):
l3fwd: update rfc2544/throughput json and display
tests/l3fwd_base.py | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V2 0/1] l3fwd: update json and display
@ 2020-07-31 7:58 yufengmx
2020-07-31 8:08 ` Mo, YufengX
0 siblings, 1 reply; 6+ messages in thread
From: yufengmx @ 2020-07-31 7:58 UTC (permalink / raw)
To: dts; +Cc: yufengmx
update json and display.
v3:
- change Actual line rate (Mpps) --> Actual Throughput (Mpps).
v2:
- update rfc2544 json and display.
v1:
- update throughput delta, Throughput delta = run value - expected value
yufengmx (1):
l3fwd: update rfc2544/throughput json and display
tests/l3fwd_base.py | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V2 0/1] l3fwd: update json and display
@ 2020-07-30 1:02 yufengmx
0 siblings, 0 replies; 6+ messages in thread
From: yufengmx @ 2020-07-30 1:02 UTC (permalink / raw)
To: dts; +Cc: yufengmx
update json and display.
v2:
- update rfc2544 json and display.
v1:
- update throughput delta, Throughput delta = run value - expected value
yufengmx (1):
l3fwd: update rfc2544/throughput json and display
tests/l3fwd_base.py | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-31 8:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-31 8:05 [dts] [PATCH V2 0/1] l3fwd: update json and display yufengmx
2020-07-31 8:05 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx
-- strict thread matches above, loose matches on Subject: below --
2020-07-31 8:05 [dts] [PATCH V2 0/1] l3fwd: update " yufengmx
2020-07-31 7:58 yufengmx
2020-07-31 8:08 ` Mo, YufengX
2020-07-30 1:02 yufengmx
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).