* [dts] [PATCH V2 0/1] l3fwd: update json and display @ 2020-07-31 8:05 yufengmx 2020-07-31 8:05 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx 0 siblings, 1 reply; 4+ messages in thread From: yufengmx @ 2020-07-31 8:05 UTC (permalink / raw) To: dts; +Cc: yufengmx update json and display. v4: - rebase source code v3: - change Actual line rate (Mpps) --> Actual Throughput (Mpps). v2: - update rfc2544 json and display. v1: - update throughput delta, Throughput delta = run value - expected value yufengmx (1): l3fwd: update rfc2544/throughput json and display tests/l3fwd_base.py | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput json and display 2020-07-31 8:05 [dts] [PATCH V2 0/1] l3fwd: update json and display yufengmx @ 2020-07-31 8:05 ` yufengmx 0 siblings, 0 replies; 4+ messages in thread From: yufengmx @ 2020-07-31 8:05 UTC (permalink / raw) To: dts; +Cc: yufengmx update rfc2544/throughput json and display. Signed-off-by: yufengmx <yufengx.mo@intel.com> --- tests/l3fwd_base.py | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/tests/l3fwd_base.py b/tests/l3fwd_base.py index a6e26b0..6eddde0 100644 --- a/tests/l3fwd_base.py +++ b/tests/l3fwd_base.py @@ -827,11 +827,12 @@ class L3fwdBase(object): expected, pps, round(gap, 2)) self.logger.error(msg) else: + expected = pps msg = ('{0} {1} expected throughput value is not set, ' 'ignore check').format(config, frame_size) self.logger.warning(msg) status = 'pass' - js_results.append([status, [pps, linerate - pps], percentage, config, frame_size]) + js_results.append([status, [pps, pps - expected], percentage, config, frame_size]) # save data with json format self.__save_throughput_result(self.__cur_case, js_results) # display result table @@ -861,6 +862,7 @@ class L3fwdBase(object): self.__cur_case, {}).get(self.__nic_name, {}).get( config, {}).get(str(frame_size), {}) zero_loss_rate, tx_pkts, rx_pkts, pps = result if result else [None] * 3 + zero_loss_rate = zero_loss_rate or 0 mpps = pps / 1000000.0 # expected line rate _frame_size = self.__get_frame_size(stm_name, frame_size) @@ -880,22 +882,32 @@ class L3fwdBase(object): ]) # check data with expected values expected_rate = float(expected_cfg.get('rate') or 100.0) + gap = 100 * (zero_loss_rate - expected_rate) / expected_rate status = 'pass' \ - if zero_loss_rate and zero_loss_rate > expected_rate \ + if abs(gap) < bias \ else 'failed' js_results.append( [status, - [mpps, linerate - mpps], actual_rate_percent, + [mpps, zero_loss_rate - expected_rate], actual_rate_percent, config, frame_size]) # save data in json file self.__save_rfc2544_result(self.__cur_case, js_results) # display result table + # Total Cores/Threads/Queues per port + # Frame Size + # Mode: LPM/EM + # Expected LineRate % : which config in l3fwd_lpm_ipv4_rfc2544.cfg + # Actual LineRate % : actual run zero loss rate + # Expected Throughput (Mpps) : Max linerate throughput value * 'Expected LineRate %' + # Actual Throughput (Mpps) : actual run throughput value on the zero loss rate + # tx_pkts : send pkts num + # rx_pkts : received pkts num title = [ 'Total Cores/Threads/Queues per port', "Frame Size", "Mode", 'Expected Throughput (Mpps)', - 'Actual line rate (Mpps) ', + 'Actual Throughput (Mpps) ', '{} Mode config line rate % '.format(mode.upper()), '{} Mode actual line rate % '.format(mode.upper()), 'tx_pkts', -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V2 0/1] l3fwd: update json and display @ 2020-07-31 7:58 yufengmx 2020-07-31 7:58 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx 0 siblings, 1 reply; 4+ messages in thread From: yufengmx @ 2020-07-31 7:58 UTC (permalink / raw) To: dts; +Cc: yufengmx update json and display. v3: - change Actual line rate (Mpps) --> Actual Throughput (Mpps). v2: - update rfc2544 json and display. v1: - update throughput delta, Throughput delta = run value - expected value yufengmx (1): l3fwd: update rfc2544/throughput json and display tests/l3fwd_base.py | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput json and display 2020-07-31 7:58 [dts] [PATCH V2 0/1] l3fwd: update " yufengmx @ 2020-07-31 7:58 ` yufengmx 0 siblings, 0 replies; 4+ messages in thread From: yufengmx @ 2020-07-31 7:58 UTC (permalink / raw) To: dts; +Cc: yufengmx update rfc2544/throughput json and display. Signed-off-by: yufengmx <yufengx.mo@intel.com> --- tests/l3fwd_base.py | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/tests/l3fwd_base.py b/tests/l3fwd_base.py index a6e26b0..c2b77db 100644 --- a/tests/l3fwd_base.py +++ b/tests/l3fwd_base.py @@ -827,11 +827,12 @@ class L3fwdBase(object): expected, pps, round(gap, 2)) self.logger.error(msg) else: + expected = pps msg = ('{0} {1} expected throughput value is not set, ' 'ignore check').format(config, frame_size) self.logger.warning(msg) status = 'pass' - js_results.append([status, [pps, linerate - pps], percentage, config, frame_size]) + js_results.append([status, [pps, pps - expected], percentage, config, frame_size]) # save data with json format self.__save_throughput_result(self.__cur_case, js_results) # display result table @@ -861,6 +862,7 @@ class L3fwdBase(object): self.__cur_case, {}).get(self.__nic_name, {}).get( config, {}).get(str(frame_size), {}) zero_loss_rate, tx_pkts, rx_pkts, pps = result if result else [None] * 3 + zero_loss_rate = zero_loss_rate or 0 mpps = pps / 1000000.0 # expected line rate _frame_size = self.__get_frame_size(stm_name, frame_size) @@ -880,16 +882,26 @@ class L3fwdBase(object): ]) # check data with expected values expected_rate = float(expected_cfg.get('rate') or 100.0) + gap = 100 * (zero_loss_rate - expected_rate) / expected_rate status = 'pass' \ - if zero_loss_rate and zero_loss_rate > expected_rate \ + if abs(gap) < bias \ else 'failed' js_results.append( [status, - [mpps, linerate - mpps], actual_rate_percent, + [mpps, zero_loss_rate - expected_rate], actual_rate_percent, config, frame_size]) # save data in json file self.__save_rfc2544_result(self.__cur_case, js_results) # display result table + # Total Cores/Threads/Queues per port + # Frame Size + # Mode: LPM/EM + # Expected LineRate % : which config in l3fwd_lpm_ipv4_rfc2544.cfg + # Actual LineRate % : actual run zero loss rate + # Expected Throughput (Mpps) : Max linerate throughput value * 'Expected LineRate %' + # Actual Throughput (Mpps) : actual run throughput value on the zero loss rate + # tx_pkts : send pkts num + # rx_pkts : received pkts num title = [ 'Total Cores/Threads/Queues per port', "Frame Size", -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V2 0/1] l3fwd: update json and display @ 2020-07-30 1:02 yufengmx 2020-07-30 1:02 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx 0 siblings, 1 reply; 4+ messages in thread From: yufengmx @ 2020-07-30 1:02 UTC (permalink / raw) To: dts; +Cc: yufengmx update json and display. v2: - update rfc2544 json and display. v1: - update throughput delta, Throughput delta = run value - expected value yufengmx (1): l3fwd: update rfc2544/throughput json and display tests/l3fwd_base.py | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
* [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput json and display 2020-07-30 1:02 [dts] [PATCH V2 0/1] l3fwd: update " yufengmx @ 2020-07-30 1:02 ` yufengmx 0 siblings, 0 replies; 4+ messages in thread From: yufengmx @ 2020-07-30 1:02 UTC (permalink / raw) To: dts; +Cc: yufengmx update rfc2544/throughput json and display. Signed-off-by: yufengmx <yufengx.mo@intel.com> --- tests/l3fwd_base.py | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/tests/l3fwd_base.py b/tests/l3fwd_base.py index a6e26b0..c2b77db 100644 --- a/tests/l3fwd_base.py +++ b/tests/l3fwd_base.py @@ -827,11 +827,12 @@ class L3fwdBase(object): expected, pps, round(gap, 2)) self.logger.error(msg) else: + expected = pps msg = ('{0} {1} expected throughput value is not set, ' 'ignore check').format(config, frame_size) self.logger.warning(msg) status = 'pass' - js_results.append([status, [pps, linerate - pps], percentage, config, frame_size]) + js_results.append([status, [pps, pps - expected], percentage, config, frame_size]) # save data with json format self.__save_throughput_result(self.__cur_case, js_results) # display result table @@ -861,6 +862,7 @@ class L3fwdBase(object): self.__cur_case, {}).get(self.__nic_name, {}).get( config, {}).get(str(frame_size), {}) zero_loss_rate, tx_pkts, rx_pkts, pps = result if result else [None] * 3 + zero_loss_rate = zero_loss_rate or 0 mpps = pps / 1000000.0 # expected line rate _frame_size = self.__get_frame_size(stm_name, frame_size) @@ -880,16 +882,26 @@ class L3fwdBase(object): ]) # check data with expected values expected_rate = float(expected_cfg.get('rate') or 100.0) + gap = 100 * (zero_loss_rate - expected_rate) / expected_rate status = 'pass' \ - if zero_loss_rate and zero_loss_rate > expected_rate \ + if abs(gap) < bias \ else 'failed' js_results.append( [status, - [mpps, linerate - mpps], actual_rate_percent, + [mpps, zero_loss_rate - expected_rate], actual_rate_percent, config, frame_size]) # save data in json file self.__save_rfc2544_result(self.__cur_case, js_results) # display result table + # Total Cores/Threads/Queues per port + # Frame Size + # Mode: LPM/EM + # Expected LineRate % : which config in l3fwd_lpm_ipv4_rfc2544.cfg + # Actual LineRate % : actual run zero loss rate + # Expected Throughput (Mpps) : Max linerate throughput value * 'Expected LineRate %' + # Actual Throughput (Mpps) : actual run throughput value on the zero loss rate + # tx_pkts : send pkts num + # rx_pkts : received pkts num title = [ 'Total Cores/Threads/Queues per port', "Frame Size", -- 2.21.0 ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-07-31 8:07 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-31 8:05 [dts] [PATCH V2 0/1] l3fwd: update json and display yufengmx 2020-07-31 8:05 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx -- strict thread matches above, loose matches on Subject: below -- 2020-07-31 7:58 [dts] [PATCH V2 0/1] l3fwd: update " yufengmx 2020-07-31 7:58 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx 2020-07-30 1:02 [dts] [PATCH V2 0/1] l3fwd: update " yufengmx 2020-07-30 1:02 ` [dts] [PATCH V2 1/1] l3fwd: update rfc2544/throughput " yufengmx
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).