* [dts] [PATCH V1]test_plans: update virtio related cases' testplan
@ 2020-08-28 10:03 Xiao Qimai
2020-09-02 3:03 ` Tu, Lijuan
0 siblings, 1 reply; 2+ messages in thread
From: Xiao Qimai @ 2020-08-28 10:03 UTC (permalink / raw)
To: dts; +Cc: Xiao Qimai
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 218807 bytes --]
1. removed --socket-mem and --legacy-mem in testpmd eal parameter
2. removed van in qemu command since new version qemu not support this
parameter
Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
---
test_plans/dpdk_gro_lib_test_plan.rst | 18 +--
test_plans/dpdk_gso_lib_test_plan.rst | 12 +-
...ack_multi_paths_port_restart_test_plan.rst | 54 ++++----
.../loopback_multi_queues_test_plan.rst | 116 ++++++++---------
...back_virtio_user_server_mode_test_plan.rst | 84 ++++++------
.../perf_virtio_user_loopback_test_plan.rst | 54 ++++----
test_plans/perf_virtio_user_pvp_test_plan.rst | 32 ++---
.../pvp_diff_qemu_version_test_plan.rst | 8 +-
...emu_multi_paths_port_restart_test_plan.rst | 26 ++--
test_plans/pvp_share_lib_test_plan.rst | 8 +-
.../pvp_vhost_user_reconnect_test_plan.rst | 76 +++++------
test_plans/pvp_virtio_bonding_test_plan.rst | 12 +-
...pvp_virtio_user_2M_hugepages_test_plan.rst | 8 +-
...er_multi_queues_port_restart_test_plan.rst | 60 ++++-----
.../vdev_primary_secondary_test_plan.rst | 4 +-
test_plans/vhost_1024_ethports_test_plan.rst | 4 +-
test_plans/vhost_cbdma_test_plan.rst | 8 +-
.../vhost_dequeue_zero_copy_test_plan.rst | 64 ++++-----
.../vhost_enqueue_interrupt_test_plan.rst | 16 +--
.../vhost_multi_queue_qemu_test_plan.rst | 6 +-
test_plans/vhost_pmd_xstats_test_plan.rst | 66 +++++-----
test_plans/vhost_qemu_mtu_test_plan.rst | 2 +-
.../vhost_user_live_migration_test_plan.rst | 32 ++---
.../vhost_virtio_user_interrupt_test_plan.rst | 20 +--
.../virtio_event_idx_interrupt_test_plan.rst | 28 ++--
.../virtio_pvp_regression_test_plan.rst | 28 ++--
...tio_user_as_exceptional_path_test_plan.rst | 6 +-
...ser_for_container_networking_test_plan.rst | 4 +-
test_plans/vm2vm_virtio_pmd_test_plan.rst | 16 +--
test_plans/vm2vm_virtio_user_test_plan.rst | 122 +++++++++---------
30 files changed, 497 insertions(+), 497 deletions(-)
diff --git a/test_plans/dpdk_gro_lib_test_plan.rst b/test_plans/dpdk_gro_lib_test_plan.rst
index 3e06906a..ec121ef6 100644
--- a/test_plans/dpdk_gro_lib_test_plan.rst
+++ b/test_plans/dpdk_gro_lib_test_plan.rst
@@ -1,5 +1,5 @@
.. Copyright (c) <2020>, Intel Corporation
- All rights reserved.
+All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
@@ -130,7 +130,7 @@ Test Case1: DPDK GRO lightmode test with tcp/ipv4 traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 1::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -151,7 +151,7 @@ Test Case1: DPDK GRO lightmode test with tcp/ipv4 traffic
taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
@@ -182,7 +182,7 @@ Test Case2: DPDK GRO heavymode test with tcp/ipv4 traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 2::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -203,7 +203,7 @@ Test Case2: DPDK GRO heavymode test with tcp/ipv4 traffic
taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
@@ -234,7 +234,7 @@ Test Case3: DPDK GRO heavymode_flush4 test with tcp/ipv4 traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -255,7 +255,7 @@ Test Case3: DPDK GRO heavymode_flush4 test with tcp/ipv4 traffic
taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
@@ -301,7 +301,7 @@ Vxlan topology
2. Bind nic1 to igb_uio, launch vhost-user with testpmd and set flush interval to 4::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -325,7 +325,7 @@ Vxlan topology
taskset -c 13 qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
diff --git a/test_plans/dpdk_gso_lib_test_plan.rst b/test_plans/dpdk_gso_lib_test_plan.rst
index 8de5f56a..be1bdd20 100644
--- a/test_plans/dpdk_gso_lib_test_plan.rst
+++ b/test_plans/dpdk_gso_lib_test_plan.rst
@@ -99,7 +99,7 @@ Test Case1: DPDK GSO test with tcp traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd::
./dpdk-devbind.py -b igb_uio xx:xx.x # xx:xx.x is the pci addr of nic1
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -119,7 +119,7 @@ Test Case1: DPDK GSO test with tcp traffic
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
@@ -159,7 +159,7 @@ Test Case3: DPDK GSO test with vxlan traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -181,7 +181,7 @@ Test Case3: DPDK GSO test with vxlan traffic
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
@@ -213,7 +213,7 @@ Test Case4: DPDK GSO test with gre traffic
2. Bind nic1 to igb_uio, launch vhost-user with testpmd::
./dpdk-devbind.py -b igb_uio xx:xx.x
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -l 2-4 -n 4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --txd=1024 --rxd=1024
testpmd>set fwd csum
testpmd>stop
@@ -235,7 +235,7 @@ Test Case4: DPDK GSO test with gre traffic
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
-smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 3da94ade..d9a8d304 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -45,14 +45,14 @@ Test Case 1: loopback test with packed ring mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -86,14 +86,14 @@ Test Case 2: loopback test with packed ring non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -127,14 +127,14 @@ Test Case 3: loopback test with packed ring inorder mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -168,14 +168,14 @@ Test Case 4: loopback test with packed ring inorder non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -209,14 +209,14 @@ Test Case 5: loopback test with split ring inorder mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -250,14 +250,14 @@ Test Case 6: loopback test with split ring inorder non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -291,14 +291,14 @@ Test Case 7: loopback test with split ring mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -332,14 +332,14 @@ Test Case 8: loopback test with split ring non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -373,14 +373,14 @@ Test Case 9: loopback test with split ring vector_rx path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
diff --git a/test_plans/loopback_multi_queues_test_plan.rst b/test_plans/loopback_multi_queues_test_plan.rst
index 635b0703..0cea2b11 100644
--- a/test_plans/loopback_multi_queues_test_plan.rst
+++ b/test_plans/loopback_multi_queues_test_plan.rst
@@ -45,15 +45,15 @@ Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -76,15 +76,15 @@ Test Case 1: loopback with virtio 1.1 mergeable path using 1 queue and 8 queues
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -105,15 +105,15 @@ Test Case 2: loopback with virtio 1.1 non-mergeable path using 1 queue and 8 que
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -136,15 +136,15 @@ Test Case 2: loopback with virtio 1.1 non-mergeable path using 1 queue and 8 que
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -165,15 +165,15 @@ Test Case 3: loopback with virtio 1.0 inorder mergeable path using 1 queue and 8
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -196,15 +196,15 @@ Test Case 3: loopback with virtio 1.0 inorder mergeable path using 1 queue and 8
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -225,15 +225,15 @@ Test Case 4: loopback with virtio 1.0 inorder non-mergeable path using 1 queue a
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -256,15 +256,15 @@ Test Case 4: loopback with virtio 1.0 inorder non-mergeable path using 1 queue a
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -285,15 +285,15 @@ Test Case 5: loopback with virtio 1.0 mergeable path using 1 queue and 8 queues
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -316,15 +316,15 @@ Test Case 5: loopback with virtio 1.0 mergeable path using 1 queue and 8 queues
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=1,in_order=0 \
-- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -345,15 +345,15 @@ Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -376,15 +376,15 @@ Test Case 6: loopback with virtio 1.0 non-mergeable path using 1 queue and 8 que
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --enable-hw-vlan-strip --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -405,15 +405,15 @@ Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -436,15 +436,15 @@ Test Case 7: loopback with virtio 1.0 vector_rx path using 1 queue and 8 queues
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -465,15 +465,15 @@ Test Case 8: loopback with virtio 1.1 inorder mergeable path using 1 queue and 8
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -496,15 +496,15 @@ Test Case 8: loopback with virtio 1.1 inorder mergeable path using 1 queue and 8
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -525,14 +525,14 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
1. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
+ ./testpmd -l 1-2 -n 4 --no-pci --vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -561,8 +561,8 @@ Test Case 9: loopback with virtio 1.1 inorder non-mergeable path using 1 queue a
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -590,8 +590,8 @@ Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -614,15 +614,15 @@ Test Case 10: loopback with virtio 1.1 vectorized path using 1 queue and 8 queue
6. Launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-9 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-9 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=8' -- \
-i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
7. Launch virtio-user by below command::
- ./testpmd -n 4 -l 10-18 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 10-18 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=8,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --nb-cores=8 --rxq=8 --txq=8 --txd=1024 --rxd=1024
testpmd>set fwd mac
diff --git a/test_plans/loopback_virtio_user_server_mode_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
index 1fcbf5d6..f30e3a55 100644
--- a/test_plans/loopback_virtio_user_server_mode_test_plan.rst
+++ b/test_plans/loopback_virtio_user_server_mode_test_plan.rst
@@ -44,14 +44,14 @@ Test Case 1: Basic test for packed ring server mode
1. Launch virtio-user as server mode::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 1-2 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i --rxq=1 --txq=1 --no-numa
>set fwd mac
>start
2. Launch vhost as client mode::
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
>set fwd mac
>start tx_first 32
@@ -65,14 +65,14 @@ Test Case 2: Basic test for split ring server mode
1. Launch virtio-user as server mode::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 1-2 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i --rxq=1 --txq=1 --no-numa
>set fwd mac
>start
2. Launch vhost as client mode::
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=/tmp/sock0,client=1,queues=1' -- -i --rxq=1 --txq=1 --nb-cores=1
>set fwd mac
>start tx_first 32
@@ -87,14 +87,14 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -107,7 +107,7 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -129,7 +129,7 @@ Test Case 3: loopback reconnect test with split ring mergeable path and server m
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -159,14 +159,14 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -179,7 +179,7 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -201,7 +201,7 @@ Test Case 4: loopback reconnect test with split ring inorder mergeable path and
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=1,in_order=1\
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -231,14 +231,14 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -251,7 +251,7 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -273,7 +273,7 @@ Test Case 5: loopback reconnect test with split ring inorder non-mergeable path
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -303,14 +303,14 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -323,7 +323,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -345,7 +345,7 @@ Test Case 6: loopback reconnect test with split ring non-mergeable path and serv
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -375,14 +375,14 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -395,7 +395,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -417,7 +417,7 @@ Test Case 7: loopback reconnect test with split ring vector_rx path and server m
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,mrg_rxbuf=0,in_order=0,vectorized=1 \
-- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -447,14 +447,14 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -467,7 +467,7 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -489,7 +489,7 @@ Test Case 8: loopback reconnect test with packed ring mergeable path and server
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -519,14 +519,14 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -539,7 +539,7 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -561,7 +561,7 @@ Test Case 9: loopback reconnect test with packed ring non-mergeable path and ser
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -591,14 +591,14 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -611,7 +611,7 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -633,7 +633,7 @@ Test Case 10: loopback reconnect test with packed ring inorder mergeable path an
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -663,14 +663,14 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
1. launch vhost as client mode with 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start
2. Launch virtio-user as server mode with 2 queues::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -683,7 +683,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -705,7 +705,7 @@ Test Case 11: loopback reconnect test with packed ring inorder non-mergeable pat
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -755,7 +755,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
4. Relaunch vhost and send packets::
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -c 0xe -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost0,iface=vhost-net,client=1,queues=2' -- -i --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
>start tx_first 32
@@ -777,7 +777,7 @@ Test Case 12: loopback reconnect test with packed ring vectorized path and serve
8. Relaunch virtio-user and send packets::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,server=1,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
diff --git a/test_plans/perf_virtio_user_loopback_test_plan.rst b/test_plans/perf_virtio_user_loopback_test_plan.rst
index b1dcc327..11514dd8 100644
--- a/test_plans/perf_virtio_user_loopback_test_plan.rst
+++ b/test_plans/perf_virtio_user_loopback_test_plan.rst
@@ -45,14 +45,14 @@ Test Case 1: loopback test with packed ring mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -73,14 +73,14 @@ Test Case 2: loopback test with packed ring non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -101,14 +101,14 @@ Test Case 3: loopback test with packed ring inorder mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -129,14 +129,14 @@ Test Case 4: loopback test with packed ring inorder non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -157,14 +157,14 @@ Test Case 5: loopback test with split ring mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -185,14 +185,14 @@ Test Case 6: loopback test with split ring non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -213,14 +213,14 @@ Test Case 7: loopback test with split ring vector_rx path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -241,14 +241,14 @@ Test Case 8: loopback test with split ring inorder mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -269,14 +269,14 @@ Test Case 9: loopback test with split ring inorder non-mergeable path
1. Launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./testpmd -n 4 -l 2-4 --no-pci \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
diff --git a/test_plans/perf_virtio_user_pvp_test_plan.rst b/test_plans/perf_virtio_user_pvp_test_plan.rst
index 11c15504..8021c9db 100644
--- a/test_plans/perf_virtio_user_pvp_test_plan.rst
+++ b/test_plans/perf_virtio_user_pvp_test_plan.rst
@@ -52,7 +52,7 @@ Test Case 1: pvp test with packed ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-3 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-3 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -60,8 +60,8 @@ Test Case 1: pvp test with packed ring mergeable path
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -77,15 +77,15 @@ Test Case 2: virtio single core performance test with packed ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>set fwd io
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -101,14 +101,14 @@ Test Case 3: vhost single core performance test with packed ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
@@ -124,7 +124,7 @@ Test Case 4: pvp test with split ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -132,8 +132,8 @@ Test Case 4: pvp test with split ring mergeable path
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -149,15 +149,15 @@ Test Case 5: virtio single core performance test with split ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>set fwd io
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -173,14 +173,14 @@ Test Case 6: vhost single core performance test with split ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --no-pci --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -l 7-9 -n 4 --socket-mem 1024,1024 --legacy-mem --file-prefix=virtio \
+ ./testpmd -l 7-9 -n 4 --file-prefix=virtio \
--vdev=virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net,queues=1,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --txd=1024 --rxd=1024
>set fwd io
diff --git a/test_plans/pvp_diff_qemu_version_test_plan.rst b/test_plans/pvp_diff_qemu_version_test_plan.rst
index 1c7bf468..612e0e26 100644
--- a/test_plans/pvp_diff_qemu_version_test_plan.rst
+++ b/test_plans/pvp_diff_qemu_version_test_plan.rst
@@ -50,7 +50,7 @@ Test Case 1: PVP multi qemu version test with virtio 0.95 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -65,7 +65,7 @@ Test Case 1: PVP multi qemu version test with virtio 0.95 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-netdev user,id=netdev0,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev1,chardev=char0,vhostforce \
@@ -88,7 +88,7 @@ Test Case 2: PVP test with virtio 1.0 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -103,7 +103,7 @@ Test Case 2: PVP test with virtio 1.0 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
-netdev user,id=netdev0,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev1,chardev=char0,vhostforce \
diff --git a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
index 98ae651c..9456fdc4 100644
--- a/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/pvp_qemu_multi_paths_port_restart_test_plan.rst
@@ -51,7 +51,7 @@ Test Case 1: pvp test with virtio 0.95 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -64,8 +64,8 @@ Test Case 1: pvp test with virtio 0.95 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -98,7 +98,7 @@ Test Case 2: pvp test with virtio 0.95 normal path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -111,7 +111,7 @@ Test Case 2: pvp test with virtio 0.95 normal path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
@@ -144,7 +144,7 @@ Test Case 3: pvp test with virtio 0.95 vrctor_rx path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -157,7 +157,7 @@ Test Case 3: pvp test with virtio 0.95 vrctor_rx path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
@@ -190,7 +190,7 @@ Test Case 4: pvp test with virtio 1.0 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -203,7 +203,7 @@ Test Case 4: pvp test with virtio 1.0 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -236,7 +236,7 @@ Test Case 5: pvp test with virtio 1.0 normal path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -249,7 +249,7 @@ Test Case 5: pvp test with virtio 1.0 normal path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
@@ -282,7 +282,7 @@ Test Case 6: pvp test with virtio 1.0 vrctor_rx path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
@@ -295,7 +295,7 @@ Test Case 6: pvp test with virtio 1.0 vrctor_rx path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024 \
diff --git a/test_plans/pvp_share_lib_test_plan.rst b/test_plans/pvp_share_lib_test_plan.rst
index 38f74e1c..ef38d897 100644
--- a/test_plans/pvp_share_lib_test_plan.rst
+++ b/test_plans/pvp_share_lib_test_plan.rst
@@ -58,13 +58,13 @@ Test Case1: Vhost/virtio-user pvp share lib test with niantic
4. Bind niantic port with igb_uio, use option ``-d`` to load the dynamic pmd when launch vhost::
- ./testpmd -c 0x03 -n 4 --socket-mem 1024,1024 --legacy-mem -d librte_pmd_vhost.so.2.1 -d librte_pmd_ixgbe.so.2.1 -d librte_mempool_ring.so.1.1 \
+ ./testpmd -c 0x03 -n 4 -d librte_pmd_vhost.so.2.1 -d librte_pmd_ixgbe.so.2.1 -d librte_mempool_ring.so.1.1 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i
testpmd>start
5. Launch virtio-user::
- ./testpmd -c 0x0c -n 4 --socket-mem 1024,1024 --legacy-mem -d librte_pmd_virtio.so.1.1 -d librte_mempool_ring.so.1.1 \
+ ./testpmd -c 0x0c -n 4 -d librte_pmd_virtio.so.1.1 -d librte_mempool_ring.so.1.1 \
--no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i
testpmd>start
@@ -79,6 +79,6 @@ Similar as Test Case1, all steps are similar except step 4:
4. Bind fortville port with igb_uio, use option ``-d`` to load the dynamic pmd when launch vhost::
- ./testpmd -c 0x03 -n 4 --socket-mem 1024,1024 --legacy-mem -d librte_pmd_vhost.so.2.1 -d librte_pmd_i40e.so.1.1 -d librte_mempool_ring.so.1.1 \
+ ./testpmd -c 0x03 -n 4 -d librte_pmd_vhost.so.2.1 -d librte_pmd_i40e.so.1.1 -d librte_mempool_ring.so.1.1 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i
- testpmd>start
\ No newline at end of file
+ testpmd>start
diff --git a/test_plans/pvp_vhost_user_reconnect_test_plan.rst b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
index e6f75869..6641d447 100644
--- a/test_plans/pvp_vhost_user_reconnect_test_plan.rst
+++ b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
@@ -61,7 +61,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -72,8 +72,8 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -92,7 +92,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -106,7 +106,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -117,8 +117,8 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -151,7 +151,7 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
1. Bind one port to igb_uio, launch the vhost by below command::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -162,8 +162,8 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -174,8 +174,8 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -200,7 +200,7 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
6. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -213,7 +213,7 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
1. Bind one port to igb_uio, launch the vhost by below command::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -224,8 +224,8 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -236,8 +236,8 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -280,7 +280,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -290,8 +290,8 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -302,8 +302,8 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -324,7 +324,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
6. Kill the vhost-user, then re-launch the vhost-user::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
@@ -335,7 +335,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -345,8 +345,8 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -357,8 +357,8 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -394,7 +394,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -425,7 +425,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -439,7 +439,7 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
1. Bind one port to igb_uio, then launch vhost with client mode by below commands::
- ./testpmd -c 0x30 -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -484,7 +484,7 @@ Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
1. Bind one port to igb_uio, launch the vhost by below command::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -533,7 +533,7 @@ Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
6. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -546,7 +546,7 @@ Test Case 14: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
1. Bind one port to igb_uio, launch the vhost by below command::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -613,7 +613,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -657,7 +657,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
6. Kill the vhost-user, then re-launch the vhost-user::
testpmd>quit
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
@@ -668,7 +668,7 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./testpmd -c 0x30 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
diff --git a/test_plans/pvp_virtio_bonding_test_plan.rst b/test_plans/pvp_virtio_bonding_test_plan.rst
index c45b3f78..90438cc9 100644
--- a/test_plans/pvp_virtio_bonding_test_plan.rst
+++ b/test_plans/pvp_virtio_bonding_test_plan.rst
@@ -52,7 +52,7 @@ Flow: TG--> NIC --> Vhost --> Virtio3 --> Virtio4 --> Vhost--> NIC--> TG
1. Bind one port to igb_uio,launch vhost by below command::
- ./testpmd -l 1-6 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' --vdev 'net_vhost2,iface=vhost-net2,client=1,queues=1' --vdev 'net_vhost3,iface=vhost-net3,client=1,queues=1' -- -i --port-topology=chained --nb-cores=4 --txd=1024 --rxd=1024
+ ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' --vdev 'net_vhost2,iface=vhost-net2,client=1,queues=1' --vdev 'net_vhost3,iface=vhost-net3,client=1,queues=1' -- -i --port-topology=chained --nb-cores=4 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -61,8 +61,8 @@ Flow: TG--> NIC --> Vhost --> Virtio3 --> Virtio4 --> Vhost--> NIC--> TG
qemu-system-x86_64 -name vm0 -enable-kvm -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
-device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
-daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
- -net nic,vlan=0,macaddr=00:00:00:c7:56:64,addr=1f \
- -net user,vlan=0,hostfwd=tcp:127.0.0.1:6008-:22 \
+ -net nic,macaddr=00:00:00:c7:56:64,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6008-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
@@ -114,7 +114,7 @@ Test case 2: vhost-user/virtio-pmd pvp bonding test with different mode from 1 t
1. Bind one port to igb_uio,launch vhost by below command::
- ./testpmd -l 1-6 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' --vdev 'net_vhost2,iface=vhost-net2,client=1,queues=1' --vdev 'net_vhost3,iface=vhost-net3,client=1,queues=1' -- -i --port-topology=chained --nb-cores=4 --txd=1024 --rxd=1024
+ ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' --vdev 'net_vhost2,iface=vhost-net2,client=1,queues=1' --vdev 'net_vhost3,iface=vhost-net3,client=1,queues=1' -- -i --port-topology=chained --nb-cores=4 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -123,8 +123,8 @@ Test case 2: vhost-user/virtio-pmd pvp bonding test with different mode from 1 t
qemu-system-x86_64 -name vm0 -enable-kvm -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
-device virtio-serial -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
-daemonize -monitor unix:/tmp/vm0_monitor.sock,server,nowait \
- -net nic,vlan=0,macaddr=00:00:00:c7:56:64,addr=1f \
- -net user,vlan=0,hostfwd=tcp:127.0.0.1:6008-:22 \
+ -net nic,macaddr=00:00:00:c7:56:64,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6008-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01 \
diff --git a/test_plans/pvp_virtio_user_2M_hugepages_test_plan.rst b/test_plans/pvp_virtio_user_2M_hugepages_test_plan.rst
index 6a80b895..89af30f7 100644
--- a/test_plans/pvp_virtio_user_2M_hugepages_test_plan.rst
+++ b/test_plans/pvp_virtio_user_2M_hugepages_test_plan.rst
@@ -46,12 +46,12 @@ Test Case1: Basic test for virtio-user split ring 2M hugepage
2. Bind one port to igb_uio, launch vhost::
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --file-prefix=vhost \
--vdev 'net_vhost0,iface=/tmp/sock0,queues=1' -- -i
3. Launch virtio-user with 2M hugepage::
- ./testpmd -l 5-6 -n 4 --no-pci --socket-mem 1024,1024 --single-file-segments --file-prefix=virtio-user \
+ ./testpmd -l 5-6 -n 4 --no-pci --single-file-segments --file-prefix=virtio-user \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,queues=1 -- -i
@@ -66,12 +66,12 @@ Test Case1: Basic test for virtio-user packed ring 2M hugepage
2. Bind one port to igb_uio, launch vhost::
- ./testpmd -l 3-4 -n 4 --socket-mem 1024,1024 --file-prefix=vhost \
+ ./testpmd -l 3-4 -n 4 --file-prefix=vhost \
--vdev 'net_vhost0,iface=/tmp/sock0,queues=1' -- -i
3. Launch virtio-user with 2M hugepage::
- ./testpmd -l 5-6 -n 4 --no-pci --socket-mem 1024,1024 --single-file-segments --file-prefix=virtio-user \
+ ./testpmd -l 5-6 -n 4 --no-pci --single-file-segments --file-prefix=virtio-user \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,packed_vq=1,queues=1 -- -i
diff --git a/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst b/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst
index 059b457e..c50c9aca 100644
--- a/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst
+++ b/test_plans/pvp_virtio_user_multi_queues_port_restart_test_plan.rst
@@ -54,15 +54,15 @@ Test Case 1: pvp 2 queues test with packed ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=255 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
@@ -92,15 +92,15 @@ Test Case 2: pvp 2 queues test with packed ring non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=255 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
@@ -125,15 +125,15 @@ Test Case 3: pvp 2 queues test with split ring inorder mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -158,15 +158,15 @@ Test Case 4: pvp 2 queues test with split ring inorder non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -191,15 +191,15 @@ Test Case 5: pvp 2 queues test with split ring mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -224,15 +224,15 @@ Test Case 6: pvp 2 queues test with split ring non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -257,15 +257,15 @@ Test Case 7: pvp 2 queues test with split ring vector_rx path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -290,15 +290,15 @@ Test Case 8: pvp 2 queues test with packed ring inorder mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=255 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
@@ -323,15 +323,15 @@ Test Case 9: pvp 2 queues test with packed ring inorder non-mergeable path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
@@ -356,15 +356,15 @@ Test Case 10: pvp 2 queues test with packed ring vectorized path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
diff --git a/test_plans/vdev_primary_secondary_test_plan.rst b/test_plans/vdev_primary_secondary_test_plan.rst
index 33d240e8..a148fcbe 100644
--- a/test_plans/vdev_primary_secondary_test_plan.rst
+++ b/test_plans/vdev_primary_secondary_test_plan.rst
@@ -143,7 +143,7 @@ SW preparation: Change one line of the symmetric_mp sample and rebuild::
1. Bind one port to igb_uio, launch testpmd by below command::
- ./testpmd -l 1-6 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd txonly
testpmd>start
@@ -181,7 +181,7 @@ Test Case 2: Virtio-pmd primary and secondary process hotplug test
1. Launch testpmd by below command::
- ./testpmd -l 1-6 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
+ ./testpmd -l 1-6 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=2,client=1' --vdev 'net_vhost1,iface=vhost-net1,queues=2,client=1' -- -i --nb-cores=4 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd txonly
testpmd>start
diff --git a/test_plans/vhost_1024_ethports_test_plan.rst b/test_plans/vhost_1024_ethports_test_plan.rst
index 636ddf52..c31f62a3 100644
--- a/test_plans/vhost_1024_ethports_test_plan.rst
+++ b/test_plans/vhost_1024_ethports_test_plan.rst
@@ -47,11 +47,11 @@ Test Case1: Basic test for launch vhost with 1024 ethports
2. Launch vhost with 1024 vdev::
- ./testpmd -c 0x3000 -n 4 --socket-mem 10240,10240 --file-prefix=vhost --vdev 'eth_vhost0,iface=vhost-net,queues=1' \
+ ./testpmd -c 0x3000 -n 4 --file-prefix=vhost --vdev 'eth_vhost0,iface=vhost-net,queues=1' \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' ... -- -i # only list two vdev, here ommit other 1022 vdevs, from eth_vhost2 to eth_vhost1023
3. Change "CONFIG_RTE_MAX_ETHPORTS" back to 32 in DPDK configure file::
vi ./config/common_base
+CONFIG_RTE_MAX_ETHPORTS=32
- -CONFIG_RTE_MAX_ETHPORTS=1024
\ No newline at end of file
+ -CONFIG_RTE_MAX_ETHPORTS=1024
diff --git a/test_plans/vhost_cbdma_test_plan.rst b/test_plans/vhost_cbdma_test_plan.rst
index e94a9974..dfe064a2 100644
--- a/test_plans/vhost_cbdma_test_plan.rst
+++ b/test_plans/vhost_cbdma_test_plan.rst
@@ -118,8 +118,8 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
7. Relaunch virtio-user with vector_rx path, then repeat step 3::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=0,in_order=0,queues=1 \
-- -i --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -130,7 +130,7 @@ Test Case2: Dynamic queue number test for DMA-accelerated vhost Tx operations
1. Bind two cbdma port and one nic port to igb_uio, then launch vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 28-29 --socket-mem 1024,1024 --legacy-mem \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 28-29 \
--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0@80:04.5;txq1@80:04.6],dmathr=1024' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
set fwd mac
@@ -174,7 +174,7 @@ Test Case2: Dynamic queue number test for DMA-accelerated vhost Tx operations
6. Relaunch vhost with another two cbdma channels, check perforamnce can get target and RX/TX can work normally in two queueus::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 28-29 --socket-mem 1024,1024 --legacy-mem \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 28-29 \
--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0@80:04.0],dmathr=512' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2
>set fwd mac
diff --git a/test_plans/vhost_dequeue_zero_copy_test_plan.rst b/test_plans/vhost_dequeue_zero_copy_test_plan.rst
index 0c1743cb..f4447adf 100644
--- a/test_plans/vhost_dequeue_zero_copy_test_plan.rst
+++ b/test_plans/vhost_dequeue_zero_copy_test_plan.rst
@@ -55,7 +55,7 @@ Test Case 1: pvp split ring dequeue zero-copy test
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1,dequeue-zero-copy=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -65,8 +65,8 @@ Test Case 1: pvp split ring dequeue zero-copy test
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
@@ -95,7 +95,7 @@ Test Case 2: pvp split ring dequeue zero-copy test with 2 queues
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 2-4 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,dequeue-zero-copy=1' -- \
-i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -105,8 +105,8 @@ Test Case 2: pvp split ring dequeue zero-copy test with 2 queues
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=8,rx_queue_size=1024,tx_queue_size=1024 \
@@ -138,7 +138,7 @@ Test Case 3: pvp split ring dequeue zero-copy test with driver reload test
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-5 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=16,dequeue-zero-copy=1,client=1' -- \
-i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -148,8 +148,8 @@ Test Case 3: pvp split ring dequeue zero-copy test with driver reload test
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,rx_queue_size=1024,tx_queue_size=1024 \
@@ -158,7 +158,7 @@ Test Case 3: pvp split ring dequeue zero-copy test with driver reload test
3. On VM, bind virtio net to igb_uio and run testpmd::
./usertools/dpdk-devbind.py --bind=igb_uio xx:xx.x
- ./testpmd -l 0-4 -n 4 --socket-mem 1024,0 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
+ ./testpmd -l 0-4 -n 4 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
testpmd>set fwd rxonly
testpmd>start
@@ -173,7 +173,7 @@ Test Case 3: pvp split ring dequeue zero-copy test with driver reload test
6. Relaunch testpmd at virtio side in VM for driver reloading::
testpmd>quit
- ./testpmd -l 0-4 -n 4 --socket-mem 1024,0 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
+ ./testpmd -l 0-4 -n 4 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -190,7 +190,7 @@ Test Case 4: pvp split ring dequeue zero-copy test with maximum txfreet
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-5 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=16,dequeue-zero-copy=1,client=1' -- \
-i --nb-cores=4 --rxq=16 --txq=16 --txfreet=988 --txrs=4 --txd=992 --rxd=992
testpmd>set fwd mac
@@ -200,8 +200,8 @@ Test Case 4: pvp split ring dequeue zero-copy test with maximum txfreet
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,rx_queue_size=1024,tx_queue_size=1024 \
@@ -210,7 +210,7 @@ Test Case 4: pvp split ring dequeue zero-copy test with maximum txfreet
3. On VM, bind virtio net to igb_uio and run testpmd::
./usertools/dpdk-devbind.py --bind=igb_uio xx:xx.x
- ./testpmd -l 0-4 -n 4 --socket-mem 1024,0 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
+ ./testpmd -l 0-4 -n 4 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -232,7 +232,7 @@ Test Case 5: pvp split ring dequeue zero-copy test with vector_rx path
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=1,dequeue-zero-copy=1' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -240,8 +240,8 @@ Test Case 5: pvp split ring dequeue zero-copy test with vector_rx path
2. Launch virtio-user by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0,vectorized=1,queue_size=1024,server=1 \
-- -i --tx-offloads=0x0 --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
@@ -259,7 +259,7 @@ Test Case 6: pvp packed ring dequeue zero-copy test
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=1,dequeue-zero-copy=1' -- \
-i --nb-cores=1 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -269,8 +269,8 @@ Test Case 6: pvp packed ring dequeue zero-copy test
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,packed=on \
@@ -299,7 +299,7 @@ Test Case 7: pvp packed ring dequeue zero-copy test with 2 queues
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 2-4 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,dequeue-zero-copy=1' -- \
-i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -309,8 +309,8 @@ Test Case 7: pvp packed ring dequeue zero-copy test with 2 queues
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=8,rx_queue_size=1024,tx_queue_size=1024,packed=on \
@@ -342,7 +342,7 @@ Test Case 8: pvp packed ring dequeue zero-copy test with driver reload test
1. Bind one 40G port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-5 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=16,dequeue-zero-copy=1,client=1' -- \
-i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -352,8 +352,8 @@ Test Case 8: pvp packed ring dequeue zero-copy test with driver reload test
qemu-system-x86_64 -name vm1 \
-cpu host -enable-kvm -m 4096 -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=5,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
+ -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,rx_queue_size=1024,tx_queue_size=1024,packed=on \
@@ -362,7 +362,7 @@ Test Case 8: pvp packed ring dequeue zero-copy test with driver reload test
3. On VM, bind virtio net to igb_uio and run testpmd::
./usertools/dpdk-devbind.py --bind=igb_uio xx:xx.x
- ./testpmd -l 0-4 -n 4 --socket-mem 1024,0 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
+ ./testpmd -l 0-4 -n 4 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
testpmd>set fwd rxonly
testpmd>start
@@ -377,7 +377,7 @@ Test Case 8: pvp packed ring dequeue zero-copy test with driver reload test
6. Relaunch testpmd at virtio side in VM for driver reloading::
testpmd>quit
- ./testpmd -l 0-4 -n 4 --socket-mem 1024,0 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
+ ./testpmd -l 0-4 -n 4 -- -i --nb-cores=4 --rxq=16 --txq=16 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -395,7 +395,7 @@ Test Case 9: pvp packed ring dequeue zero-copy test with ring size is not power
1. Bind one port to igb_uio, then launch vhost by below command::
rm -rf vhost-net*
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=1,dequeue-zero-copy=1' \
-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txfreet=992
testpmd>set fwd mac
@@ -403,8 +403,8 @@ Test Case 9: pvp packed ring dequeue zero-copy test with ring size is not power
2. Launch virtio-user by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=1,packed_vq=1,queue_size=1025,server=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=1025 --rxd=1025
>set fwd mac
diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst b/test_plans/vhost_enqueue_interrupt_test_plan.rst
index ee9b7a5d..d1cf2ee8 100644
--- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
+++ b/test_plans/vhost_enqueue_interrupt_test_plan.rst
@@ -67,12 +67,12 @@ Test Case1: Wake up split ring vhost-user core with l3fwd-power sample
1. Launch virtio-user with server mode::
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 7-8 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i
2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./l3fwd-power -l 0-3 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
3. Send packet by testpmd, check vhost-user core will keep wakeup status::
@@ -87,12 +87,12 @@ Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when mul
1. Launch virtio-user with server mode::
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
+ ./l3fwd-power -l 9-12 -n 4 --no-pci --log-level=9 \
--vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
--config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
@@ -108,12 +108,12 @@ Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample
1. Launch virtio-user with server mode::
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 7-8 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i
2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
+ ./l3fwd-power -l 0-3 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
3. Send packet by testpmd, check vhost-user core will keep wakeup status::
@@ -128,12 +128,12 @@ Test Case4: Wake up packed ring vhost-user cores with l3fwd-power sample when m
1. Launch virtio-user with server mode::
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -l 1-5 -n 4 --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
+ ./l3fwd-power -l 9-12 -n 4 --no-pci --log-level=9 \
--vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
--config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
diff --git a/test_plans/vhost_multi_queue_qemu_test_plan.rst b/test_plans/vhost_multi_queue_qemu_test_plan.rst
index bb13a815..abaf7af6 100644
--- a/test_plans/vhost_multi_queue_qemu_test_plan.rst
+++ b/test_plans/vhost_multi_queue_qemu_test_plan.rst
@@ -45,7 +45,7 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
1. Bind one port to igb_uio, then launch testpmd by below command:
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
-i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
@@ -88,7 +88,7 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
ensure the vhost using 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
-i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
@@ -164,7 +164,7 @@ TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
ensure the vhost using 2 queues::
rm -rf vhost-net*
- ./testpmd -c 0xe -n 4 --socket-mem 1024,1024 \
+ ./testpmd -c 0xe -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2' -- \
-i --nb-cores=1 --rxq=1 --txq=1
testpmd>set fwd mac
diff --git a/test_plans/vhost_pmd_xstats_test_plan.rst b/test_plans/vhost_pmd_xstats_test_plan.rst
index 316b4a32..8caee819 100644
--- a/test_plans/vhost_pmd_xstats_test_plan.rst
+++ b/test_plans/vhost_pmd_xstats_test_plan.rst
@@ -53,15 +53,15 @@ Test Case 1: xstats test with packed ring mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -83,15 +83,15 @@ Test Case 2: xstats test with packed ring non-mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -111,15 +111,15 @@ Test Case 3: xstats stability test with split ring inorder mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -141,15 +141,15 @@ Test Case 4: xstats test with split ring inorder non-mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=1,mrg_rxbuf=0 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -169,15 +169,15 @@ Test Case 5: xstats test with split ring mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -197,15 +197,15 @@ Test Case 6: xstats test with split ring non-mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -225,15 +225,15 @@ Test Case 7: xstats test with split ring vector_rx path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,in_order=0,mrg_rxbuf=0,vectorized=1 \
-- -i --tx-offloads=0x0 --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -253,15 +253,15 @@ Test Case 8: xstats test with packed ring inorder mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -283,15 +283,15 @@ Test Case 9: xstats test with packed ring inorder non-mergeable path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rx-offloads=0x10 --enable-hw-vlan-strip --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -311,15 +311,15 @@ Test Case 10: xstats test with packed ring vectorized path
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1 \
-- -i --rss-ip --nb-cores=2 --rxq=2 --txq=2
>set fwd mac
@@ -339,15 +339,15 @@ Test Case 11: xstats test with packed ring vectorized path with ring size is not
1. Bind one port to vfio-pci, then launch vhost by below command::
rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem \
+ ./testpmd -n 4 -l 2-4 \
--file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2 --rxq=2 --txq=2
testpmd>set fwd mac
testpmd>start
2. Launch virtio-user by below command::
- ./testpmd -n 4 -l 5-7 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
+ ./testpmd -n 4 -l 5-7 \
+ --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --rss-ip --nb-cores=2 --rxq=2 --txq=2 --txd=255 --rxd=255
>set fwd mac
diff --git a/test_plans/vhost_qemu_mtu_test_plan.rst b/test_plans/vhost_qemu_mtu_test_plan.rst
index d7f01ee9..60b01cfb 100644
--- a/test_plans/vhost_qemu_mtu_test_plan.rst
+++ b/test_plans/vhost_qemu_mtu_test_plan.rst
@@ -46,7 +46,7 @@ Test Case: Test the MTU in virtio-net
=====================================
1. Launch the testpmd by below commands on host, and config mtu::
- ./testpmd -c 0xc -n 4 --socket-mem 2048,2048 \
+ ./testpmd -c 0xc -n 4 \
--vdev 'net_vhost0,iface=vhost-net,queues=1' \
-- -i --txd=512 --rxd=128 --nb-cores=1 --port-topology=chained
testpmd> set fwd mac
diff --git a/test_plans/vhost_user_live_migration_test_plan.rst b/test_plans/vhost_user_live_migration_test_plan.rst
index 2626f7af..22ff76d5 100644
--- a/test_plans/vhost_user_live_migration_test_plan.rst
+++ b/test_plans/vhost_user_live_migration_test_plan.rst
@@ -77,7 +77,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -100,7 +100,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -177,7 +177,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port,note not start vhost port before launching qemu::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' -- -i
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -199,7 +199,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' -- -i
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -277,7 +277,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -300,7 +300,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -365,7 +365,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -388,7 +388,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server#./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ backup server#./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -457,7 +457,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -480,7 +480,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -557,7 +557,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port,note not start vhost port before launching qemu::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' -- -i
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -579,7 +579,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1,dequeue-zero-copy=1' -- -i
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -657,7 +657,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -680,7 +680,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' --socket-mem 1024,1024 -- -i
+ backup server # ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xc0000 -n 4 --vdev 'eth_vhost0,iface=./vhost-net,queues=1' -- -i
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
@@ -745,7 +745,7 @@ On host server side:
2. Bind host port to igb_uio and start testpmd with vhost port::
host server# ./tools/dpdk-devbind.py -b igb_uio 82:00.1
- host server# ./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ host server# ./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4
host server# testpmd>start
3. Start VM on host, here we set 5432 as the serial port, 3333 as the qemu monitor port, 5555 as the SSH port::
@@ -768,7 +768,7 @@ On the backup server, run the vhost testpmd on the host and launch VM:
backup server # mkdir /mnt/huge
backup server # mount -t hugetlbfs hugetlbfs /mnt/huge
backup server # ./tools/dpdk-devbind.py -b igb_uio 82:00.0
- backup server#./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' --socket-mem 1024,1024 -- -i --nb-cores=4 --rxq=4 --txq=4
+ backup server#./x86_64-native-linuxapp-gcc/app/testpmd -l 2-6 -n 4 --vdev 'net_vhost0,iface=./vhost-net,queues=4' -- -i --nb-cores=4 --rxq=4 --txq=4
backup server # testpmd>start
5. Launch VM on the backup server, the script is similar to host, need add " -incoming tcp:0:4444 " for live migration and make sure the VM image is the NFS mounted folder, VM image is the exact one on host server::
diff --git a/test_plans/vhost_virtio_user_interrupt_test_plan.rst b/test_plans/vhost_virtio_user_interrupt_test_plan.rst
index ebf09c68..f13957c8 100644
--- a/test_plans/vhost_virtio_user_interrupt_test_plan.rst
+++ b/test_plans/vhost_virtio_user_interrupt_test_plan.rst
@@ -66,12 +66,12 @@ flow: TG --> NIC --> Vhost --> Virtio
1. Bind one NIC port to igb_uio, launch testpmd with a virtual vhost device as backend::
- ./testpmd -c 0x7c -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --rxq=1 --txq=1
+ ./testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --rxq=1 --txq=1
testpmd>start
2. Start l3fwd-power with a virtio-user device::
- ./l3fwd-power -c 0xc000 -n 4 --socket-mem 1024,1024 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+ ./l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
--vdev=virtio_user0,path=./vhost-net -- -p 1 -P --config="(0,0,14)" --parse-ptype
3. Send packets with packet generator, check the virtio-user related core can be wakeup status.
@@ -87,7 +87,7 @@ flow: Tap --> Vhost-net --> Virtio
1. Start l3fwd-power with a virtio-user device, vhost-net as backend::
- ./l3fwd-power -c 0xc000 -n 4 --socket-mem 1024,1024 --legacy-mem --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+ ./l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
--vdev=virtio_user0,path=/dev/vhost-net -- -p 1 -P --config="(0,0,14)" --parse-ptype
2. Vhost-net will generate one tap device, normally, it's TAP0, config it and generate packets on it using pind cmd::
@@ -109,13 +109,13 @@ flow: Vhost <--> Virtio
1. Start vhost-user side::
- ./testpmd -c 0x3000 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
+ ./testpmd -c 0x3000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
testpmd>set fwd mac
testpmd>start
2. Start virtio-user side::
- ./testpmd -c 0xc000 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i --tx-offloads=0x00
+ ./testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i --tx-offloads=0x00
testpmd>set fwd mac
testpmd>start
@@ -136,12 +136,12 @@ flow: TG --> NIC --> Vhost --> Virtio
1. Bind one NIC port to igb_uio, launch testpmd with a virtual vhost device as backend::
- ./testpmd -c 0x7c -n 4 --socket-mem 1024,1024 --legacy-mem --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --rxq=1 --txq=1
+ ./testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1' -- -i --rxq=1 --txq=1
testpmd>start
2. Start l3fwd-power with a virtio-user device::
- ./l3fwd-power -c 0xc000 -n 4 --socket-mem 1024,1024 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+ ./l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
--vdev=virtio_user0,path=./vhost-net,packed_vq=1 -- -p 1 -P --config="(0,0,14)" --parse-ptype
3. Send packets with packet generator, check the virtio-user related core can be wakeup status.
@@ -157,7 +157,7 @@ flow: Tap --> Vhost-net --> Virtio
1. Start l3fwd-power with a virtio-user device, vhost-net as backend::
- ./l3fwd-power -c 0xc000 -n 4 --socket-mem 1024,1024 --legacy-mem --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+ ./l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
--vdev=virtio_user0,path=/dev/vhost-net,packed_vq=1 -- -p 1 -P --config="(0,0,14)" --parse-ptype
2. Vhost-net will generate one tap device, normally, it's TAP0, config it and generate packets on it using pind cmd::
@@ -179,13 +179,13 @@ flow: Vhost <--> Virtio
1. Start vhost-user side::
- ./testpmd -c 0x3000 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
+ ./testpmd -c 0x3000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
testpmd>set fwd mac
testpmd>start
2. Start virtio-user side::
- ./testpmd -c 0xc000 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1 -- -i --tx-offloads=0x00
+ ./testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1 -- -i --tx-offloads=0x00
testpmd>set fwd mac
testpmd>start
diff --git a/test_plans/virtio_event_idx_interrupt_test_plan.rst b/test_plans/virtio_event_idx_interrupt_test_plan.rst
index 1fbadee0..6cb00ab7 100644
--- a/test_plans/virtio_event_idx_interrupt_test_plan.rst
+++ b/test_plans/virtio_event_idx_interrupt_test_plan.rst
@@ -52,7 +52,7 @@ Test Case 1: Compare interrupt times with and without split ring virtio event id
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i
+ ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i
--nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
@@ -62,7 +62,7 @@ Test Case 1: Compare interrupt times with and without split ring virtio event id
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
-vnc :12 -daemonize
@@ -85,7 +85,7 @@ Test Case 2: Split ring virtio-pci driver reload test
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM::
@@ -94,7 +94,7 @@ Test Case 2: Split ring virtio-pci driver reload test
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
-vnc :12 -daemonize
@@ -123,7 +123,7 @@ Test Case 3: Wake up split ring virtio-net cores with event idx interrupt mode 1
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 1-17 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+ ./testpmd -l 1-17 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
testpmd>start
2. Launch VM::
@@ -132,7 +132,7 @@ Test Case 3: Wake up split ring virtio-net cores with event idx interrupt mode 1
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
-vnc :12 -daemonize
@@ -158,7 +158,7 @@ Test Case 4: Compare interrupt times with and without packed ring virtio event i
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i
+ ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i
--nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
@@ -168,7 +168,7 @@ Test Case 4: Compare interrupt times with and without packed ring virtio event i
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
-vnc :12 -daemonize
@@ -191,7 +191,7 @@ Test Case 5: Packed ring virtio-pci driver reload test
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xF0000000 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM::
@@ -200,7 +200,7 @@ Test Case 5: Packed ring virtio-pci driver reload test
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=2,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
-vnc :12 -daemonize
@@ -229,7 +229,7 @@ Test Case 6: Wake up packed ring virtio-net cores with event idx interrupt mode
1. Bind one nic port to igb_uio, then launch the vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 1-17 -n 4 --socket-mem 2048,2048 --legacy-mem --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
+ ./testpmd -l 1-17 -n 4 --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,queues=16' -- -i --nb-cores=16 --txd=1024 --rxd=1024 --rxq=16 --txq=16
testpmd>start
2. Launch VM::
@@ -238,7 +238,7 @@ Test Case 6: Wake up packed ring virtio-net cores with event idx interrupt mode
qemu-system-x86_64 -name us-vhost-vm1 \
-cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
-smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6004-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6004-:22 \
-chardev socket,id=char0,path=./vhost-net -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce,queues=16 \
-device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,mq=on,vectors=40,csum=on,gso=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on \
-vnc :12 -daemonize
@@ -303,7 +303,7 @@ Test Case 8: wake up vhost-user cores with event idx interrupt mode and cbdma en
1. Launch l3fwd-power example app with client mode::
./examples/l3fwd-power/build/l3fwd-power -l 1-16 \
- -n 4 --socket-mem 1024,1024 --legacy-mem \
+ -n 4 \
--log-level=9 \
--vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7],dmathr=1024' \
-- -p 0x1 \
@@ -317,7 +317,7 @@ Test Case 8: wake up vhost-user cores with event idx interrupt mode and cbdma en
3. Relauch l3fwd-power sample for port up::
./examples/l3fwd-power/build/l3fwd-power -l 1-16 \
- -n 4 --socket-mem 1024,1024 --legacy-mem \
+ -n 4 \
--log-level=9 \
--vdev 'eth_vhost0,iface=/vhost-net0,queues=16,client=1,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7;txq8@00:04.0;txq9@00:04.1;txq10@00:04.2;txq11@00:04.3;txq12@00:04.4;txq13@00:04.5;txq14@00:04.6;txq15@00:04.7],dmathr=1024' \
-- -p 0x1 \
diff --git a/test_plans/virtio_pvp_regression_test_plan.rst b/test_plans/virtio_pvp_regression_test_plan.rst
index 69df61e9..df76b544 100644
--- a/test_plans/virtio_pvp_regression_test_plan.rst
+++ b/test_plans/virtio_pvp_regression_test_plan.rst
@@ -52,7 +52,7 @@ Test Case 1: pvp test with virtio 0.95 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -64,7 +64,7 @@ Test Case 1: pvp test with virtio 0.95 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -91,7 +91,7 @@ Test Case 2: pvp test with virtio 0.95 non-mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -103,7 +103,7 @@ Test Case 2: pvp test with virtio 0.95 non-mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -130,7 +130,7 @@ Test Case 3: pvp test with virtio 0.95 vrctor_rx path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -142,7 +142,7 @@ Test Case 3: pvp test with virtio 0.95 vrctor_rx path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -169,7 +169,7 @@ Test Case 4: pvp test with virtio 1.0 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -181,7 +181,7 @@ Test Case 4: pvp test with virtio 1.0 mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -208,7 +208,7 @@ Test Case 5: pvp test with virtio 1.0 non-mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -220,7 +220,7 @@ Test Case 5: pvp test with virtio 1.0 non-mergeable path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -247,7 +247,7 @@ Test Case 6: pvp test with virtio 1.0 vrctor_rx path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -259,7 +259,7 @@ Test Case 6: pvp test with virtio 1.0 vrctor_rx path
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,vlan=2,macaddr=00:00:00:08:e8:aa,addr=1f -net user,vlan=2,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
-chardev socket,id=char0,path=./vhost-net,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=2 \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,rx_queue_size=1024,tx_queue_size=1024,mq=on,vectors=15 \
@@ -286,7 +286,7 @@ Test Case 7: pvp test with virtio 1.1 mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -325,7 +325,7 @@ Test Case 8: pvp test with virtio 1.1 non-mergeable path
1. Bind one port to igb_uio, then launch testpmd by below command::
rm -rf vhost-net*
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 \
+ ./testpmd -l 1-3 -n 4 \
--vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1' -- -i --nb-cores=2 --rxq=2 --txq=2 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
diff --git a/test_plans/virtio_user_as_exceptional_path_test_plan.rst b/test_plans/virtio_user_as_exceptional_path_test_plan.rst
index a261e15c..f04271fa 100644
--- a/test_plans/virtio_user_as_exceptional_path_test_plan.rst
+++ b/test_plans/virtio_user_as_exceptional_path_test_plan.rst
@@ -74,7 +74,7 @@ Flow:tap0-->vhost-net-->virtio_user-->nic0-->nic1
3. Bind nic0 to igb_uio and launch the virtio_user with testpmd::
./dpdk-devbind.py -b igb_uio xx:xx.x # xx:xx.x is the pci addr of nic0
- ./testpmd -c 0xc0000 -n 4 --socket-mem 1024,1024 --file-prefix=test2 \
+ ./testpmd -c 0xc0000 -n 4 --file-prefix=test2 \
--vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024 -- -i --rxd=1024 --txd=1024
testpmd>set fwd csum
testpmd>stop
@@ -126,7 +126,7 @@ Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
2. Bind the physical port to igb_uio, launch testpmd with one queue for virtio_user::
./dpdk-devbind.py -b igb_uio xx:xx.x # xx:xx.x is the pci addr of nic0
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=1 -- -i --rxd=1024 --txd=1024
+ ./testpmd -l 1-2 -n 4 --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=1 -- -i --rxd=1024 --txd=1024
3. Check if there is a tap device generated::
@@ -156,7 +156,7 @@ Flow: tap0<-->vhost-net<-->virtio_user<-->nic0<-->TG
2. Bind the physical port to igb_uio, launch testpmd with two queues for virtio_user::
./dpdk-devbind.py -b igb_uio xx:xx.x # xx:xx.x is the pci addr of nic0
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=2 -- -i --rxd=1024 --txd=1024 --txq=2 --rxq=2 --nb-cores=1
+ ./testpmd -l 1-2 -n 4 --file-prefix=test2 --vdev=virtio_user0,mac=00:01:02:03:04:05,path=/dev/vhost-net,queue_size=1024,queues=2 -- -i --rxd=1024 --txd=1024 --txq=2 --rxq=2 --nb-cores=1
3. Check if there is a tap device generated::
diff --git a/test_plans/virtio_user_for_container_networking_test_plan.rst b/test_plans/virtio_user_for_container_networking_test_plan.rst
index 2d68f5f0..15c9c248 100644
--- a/test_plans/virtio_user_for_container_networking_test_plan.rst
+++ b/test_plans/virtio_user_for_container_networking_test_plan.rst
@@ -72,7 +72,7 @@ Test Case 1: packet forward test for container networking
2. Bind one port to igb_uio, launch vhost::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
+ ./testpmd -l 1-2 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i
2. Start a container instance with a virtio-user port::
@@ -94,7 +94,7 @@ Test Case 2: packet forward with multi-queues for container networking
2. Bind one port to igb_uio, launch vhost::
- ./testpmd -l 1-3 -n 4 --socket-mem 1024,1024 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2
+ ./testpmd -l 1-3 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=2,client=0' -- -i --nb-cores=2
2. Start a container instance with a virtio-user port::
diff --git a/test_plans/vm2vm_virtio_pmd_test_plan.rst b/test_plans/vm2vm_virtio_pmd_test_plan.rst
index 11daaabb..db410e48 100644
--- a/test_plans/vm2vm_virtio_pmd_test_plan.rst
+++ b/test_plans/vm2vm_virtio_pmd_test_plan.rst
@@ -62,7 +62,7 @@ Test Case 1: VM2VM vhost-user/virtio-pmd with vector_rx path
1. Bind one physical nic port to igb_uio, then launch the testpmd by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -117,7 +117,7 @@ Test Case 2: VM2VM vhost-user/virtio-pmd with normal path
1. Bind one physical nic port to igb_uio, then launch the testpmd by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -172,7 +172,7 @@ Test Case 3: VM2VM vhost-user/virtio1.0-pmd with vector_rx path
1. Bind one physical nic port to igb_uio, then launch the testpmd by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -227,7 +227,7 @@ Test Case 4: VM2VM vhost-user/virtio1.0-pmd with normal path
1. Bind one physical nic port to igb_uio, then launch the testpmd by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -281,7 +281,7 @@ Test Case 5: VM2VM vhost-user/virtio-pmd mergeable path with payload valid check
1. Bind virtio with igb_uio driver, launch the testpmd by below commands::
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -369,7 +369,7 @@ Test Case 6: VM2VM vhost-user/virtio1.0-pmd mergeable path with payload valid ch
1. Bind virtio with igb_uio driver, launch the testpmd by below commands::
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -457,7 +457,7 @@ Test Case 7: VM2VM vhost-user/virtio1.1-pmd mergeable path with payload valid ch
1. Bind virtio with igb_uio driver, launch the testpmd by below commands::
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -546,7 +546,7 @@ Test Case 8: VM2VM vhost-user/virtio1.1-pmd with normal path
1. Bind one physical nic port to igb_uio, then launch the testpmd by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xc0000 -n 4 --socket-mem 2048,2048 --legacy-mem --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xc0000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
diff --git a/test_plans/vm2vm_virtio_user_test_plan.rst b/test_plans/vm2vm_virtio_user_test_plan.rst
index d0be8144..14f9b438 100644
--- a/test_plans/vm2vm_virtio_user_test_plan.rst
+++ b/test_plans/vm2vm_virtio_user_test_plan.rst
@@ -64,13 +64,13 @@ Test Case 1: packed virtqueue vm2vm mergeable path test
1. Launch vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -83,7 +83,7 @@ Test Case 1: packed virtqueue vm2vm mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -106,7 +106,7 @@ Test Case 1: packed virtqueue vm2vm mergeable path test
7. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -118,7 +118,7 @@ Test Case 1: packed virtqueue vm2vm mergeable path test
9. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
testpmd>set burst 1
@@ -142,13 +142,13 @@ Test Case 2: packed virtqueue vm2vm inorder mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -161,7 +161,7 @@ Test Case 2: packed virtqueue vm2vm inorder mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -179,7 +179,7 @@ Test Case 2: packed virtqueue vm2vm inorder mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -191,7 +191,7 @@ Test Case 2: packed virtqueue vm2vm inorder mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -212,13 +212,13 @@ Test Case 3: packed virtqueue vm2vm non-mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -229,7 +229,7 @@ Test Case 3: packed virtqueue vm2vm non-mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -246,7 +246,7 @@ Test Case 3: packed virtqueue vm2vm non-mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -258,7 +258,7 @@ Test Case 3: packed virtqueue vm2vm non-mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -275,13 +275,13 @@ Test Case 4: packed virtqueue vm2vm inorder non-mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=256 --rxd=256
@@ -294,7 +294,7 @@ Test Case 4: packed virtqueue vm2vm inorder non-mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=256 --rxd=256
@@ -311,7 +311,7 @@ Test Case 4: packed virtqueue vm2vm inorder non-mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -323,7 +323,7 @@ Test Case 4: packed virtqueue vm2vm inorder non-mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,packed_vec=1 \
-- -i --rx-offloads=0x10 --nb-cores=1 --txd=256 --rxd=256
@@ -340,13 +340,13 @@ Test Case 5: split virtqueue vm2vm mergeable path test
1. Launch vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -359,7 +359,7 @@ Test Case 5: split virtqueue vm2vm mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -382,7 +382,7 @@ Test Case 5: split virtqueue vm2vm mergeable path test
7. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -394,7 +394,7 @@ Test Case 5: split virtqueue vm2vm mergeable path test
9. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -419,13 +419,13 @@ Test Case 6: split virtqueue vm2vm inorder mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -438,7 +438,7 @@ Test Case 6: split virtqueue vm2vm inorder mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -455,7 +455,7 @@ Test Case 6: split virtqueue vm2vm inorder mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -467,7 +467,7 @@ Test Case 6: split virtqueue vm2vm inorder mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -488,13 +488,13 @@ Test Case 7: split virtqueue vm2vm non-mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
@@ -505,7 +505,7 @@ Test Case 7: split virtqueue vm2vm non-mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
@@ -522,7 +522,7 @@ Test Case 7: split virtqueue vm2vm non-mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -534,7 +534,7 @@ Test Case 7: split virtqueue vm2vm non-mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0 \
-- -i --nb-cores=1 --txd=256 --rxd=256 --enable-hw-vlan-strip
@@ -551,13 +551,13 @@ Test Case 8: split virtqueue vm2vm inorder non-mergeable path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -570,7 +570,7 @@ Test Case 8: split virtqueue vm2vm inorder non-mergeable path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -587,7 +587,7 @@ Test Case 8: split virtqueue vm2vm inorder non-mergeable path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -599,7 +599,7 @@ Test Case 8: split virtqueue vm2vm inorder non-mergeable path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=1 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -616,13 +616,13 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
1. Launch testpmd by below command::
- ./testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -633,7 +633,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
4. Launch virtio-user0 and send 8k length packets::
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -650,7 +650,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -662,7 +662,7 @@ Test Case 9: split virtqueue vm2vm vector_rx path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=0,mrg_rxbuf=0,in_order=0,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -679,13 +679,13 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
1. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -698,7 +698,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
4. Launch virtio-user0 and send 8k length packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -715,7 +715,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -727,7 +727,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=256 \
-- -i --nb-cores=1 --txd=256 --rxd=256
@@ -744,13 +744,13 @@ Test Case 10: packed virtqueue vm2vm vectorized path test with ring size is not
1. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci \
--vdev 'eth_vhost0,iface=vhost-net,queues=1' --vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --nb-cores=1 --txd=255 --rxd=255
@@ -763,7 +763,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test with ring size is not
4. Launch virtio-user0 and send 8k length packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --nb-cores=1 --txd=255 --rxd=255
@@ -780,7 +780,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test with ring size is not
6. Launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --socket-mem 1024,1024 --no-pci --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -l 1-2 -n 4 --no-pci --file-prefix=vhost \
--vdev 'eth_vhost1,iface=vhost-net1,queues=1' -- \
-i --nb-cores=1 --no-flush-rx
testpmd>set fwd rxonly
@@ -792,7 +792,7 @@ Test Case 10: packed virtqueue vm2vm vectorized path test with ring size is not
8. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=1,packed_vq=1,mrg_rxbuf=0,in_order=1,vectorized=1,queue_size=255 \
-- -i --nb-cores=1 --txd=255 --rxd=255
@@ -815,7 +815,7 @@ Test Case 11: split virtqueue vm2vm inorder mergeable path multi-queues payload
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
@@ -828,7 +828,7 @@ Test Case 11: split virtqueue vm2vm inorder mergeable path multi-queues payload
4. Launch virtio-user0 and send packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
@@ -846,7 +846,7 @@ Test Case 11: split virtqueue vm2vm inorder mergeable path multi-queues payload
6. Restart step 1-3, Launch virtio-user0 and send packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
@@ -874,7 +874,7 @@ Test Case 12: split virtqueue vm2vm mergeable path multi-queues payload check wi
2. Launch virtio-user1 by below command::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 7-8 \
--no-pci --file-prefix=virtio1 \
--vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
@@ -887,7 +887,7 @@ Test Case 12: split virtqueue vm2vm mergeable path multi-queues payload check wi
4. Launch virtio-user0 and send 8k length packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
@@ -903,7 +903,7 @@ Test Case 12: split virtqueue vm2vm mergeable path multi-queues payload check wi
6. Restart step 1-3, Launch virtio-user0 and send packets::
- ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
+ ./x86_64-native-linuxapp-gcc/app/testpmd -n 4 -l 5-6 \
--no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0 \
-- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256
--
2.25.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [dts] [PATCH V1]test_plans: update virtio related cases' testplan
2020-08-28 10:03 [dts] [PATCH V1]test_plans: update virtio related cases' testplan Xiao Qimai
@ 2020-09-02 3:03 ` Tu, Lijuan
0 siblings, 0 replies; 2+ messages in thread
From: Tu, Lijuan @ 2020-09-02 3:03 UTC (permalink / raw)
To: Xiao, QimaiX, dts; +Cc: Xiao, QimaiX
> Subject: [dts] [PATCH V1]test_plans: update virtio related cases' testplan
>
> 1. removed --socket-mem and --legacy-mem in testpmd eal parameter
> 2. removed van in qemu command since new version qemu not support this
> parameter
>
> Signed-off-by: Xiao Qimai <qimaix.xiao@intel.com>
test_plans/vhost_enqueue_interrupt_test_plan.rst: does not exist
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-09-02 3:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-28 10:03 [dts] [PATCH V1]test_plans: update virtio related cases' testplan Xiao Qimai
2020-09-02 3:03 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).