From: David Liu <dliu@iol.unh.edu>
To: ferruh.yigit@intel.com
Cc: dts@dpdk.org, lylavoie@iol.unh.edu, thomas@monjalon.net,
David Liu <dliu@iol.unh.edu>
Subject: [dts] [dpdk-dev] [PATCH V1] testpmd: add eeprom/module eeprom display
Date: Tue, 8 Sep 2020 17:03:04 -0400 [thread overview]
Message-ID: <20200908210304.31921-1-dliu@iol.unh.edu> (raw)
Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the
EEPROM/module EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
---
app/test-pmd/cmdline.c | 50 ++++++++
app/test-pmd/config.c | 121 ++++++++++++++++++++
app/test-pmd/testpmd.h | 2 +
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 7 ++
4 files changed, 180 insertions(+)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a037a55c6..1195804b1 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -166,6 +166,9 @@ static void cmd_help_long_parsed(void *parsed_result,
"show port (info|stats|summary|xstats|fdir|stat_qmap|dcb_tc|cap) (port_id|all)\n"
" Display information for port_id, or all.\n\n"
+ "show port port_id (module_eeprom|eeprom)\n"
+ " Display the module EEPROM or EEPROM information for port_id.\n\n"
+
"show port X rss reta (size) (mask0,mask1,...)\n"
" Display the rss redirection table entry indicated"
" by masks on port X. size is used to indicate the"
@@ -7594,6 +7597,51 @@ cmdline_parse_inst_t cmd_showdevice = {
NULL,
},
};
+
+/* *** SHOW MODULE EEPROM/EEPROM port INFO *** */
+struct cmd_showeeprom_result {
+ cmdline_fixed_string_t show;
+ cmdline_fixed_string_t port;
+ uint16_t portnum;
+ cmdline_fixed_string_t type;
+};
+
+static void cmd_showeeprom_parsed(void *parsed_result,
+ __rte_unused struct cmdline *cl,
+ __rte_unused void *data)
+{
+ struct cmd_showeeprom_result *res = parsed_result;
+
+ if (!strcmp(res->type, "eeprom"))
+ port_eeprom_display(res->portnum);
+ else if(!strcmp(res->type, "module_eeprom"))
+ port_module_eeprom_display(res->portnum);
+ else
+ printf("Unknown argument\n");
+}
+
+cmdline_parse_token_string_t cmd_showeeprom_show =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, show, "show");
+cmdline_parse_token_string_t cmd_showeeprom_port =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, port, "port");
+cmdline_parse_token_num_t cmd_showeeprom_portnum =
+ TOKEN_NUM_INITIALIZER(struct cmd_showeeprom_result, portnum, UINT16);
+cmdline_parse_token_string_t cmd_showeeprom_type =
+ TOKEN_STRING_INITIALIZER(struct cmd_showeeprom_result, type, "module_eeprom#eeprom");
+
+cmdline_parse_inst_t cmd_showeeprom = {
+ .f = cmd_showeeprom_parsed,
+ .data = NULL,
+ .help_str = "show port <port_id> module_eeprom|eeprom",
+ .tokens = {
+ (void *)&cmd_showeeprom_show,
+ (void *)&cmd_showeeprom_port,
+ (void *)&cmd_showeeprom_portnum,
+ (void *)&cmd_showeeprom_type,
+ NULL,
+ },
+};
+
/* *** SHOW QUEUE INFO *** */
struct cmd_showqueue_result {
cmdline_fixed_string_t show;
@@ -19325,6 +19373,8 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_load_from_file,
(cmdline_parse_inst_t *)&cmd_showport,
(cmdline_parse_inst_t *)&cmd_showqueue,
+ (cmdline_parse_inst_t *)&cmd_showeeprom,
+ (cmdline_parse_inst_t *)&cmd_showmoduleeeprom,
(cmdline_parse_inst_t *)&cmd_showportall,
(cmdline_parse_inst_t *)&cmd_showdevice,
(cmdline_parse_inst_t *)&cmd_showcfg,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 8cf84ccd3..9f319208d 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -49,6 +49,7 @@
#include <rte_pmd_bnxt.h>
#endif
#include <rte_gro.h>
+#include <rte_hexdump.h>
#include "testpmd.h"
@@ -710,6 +711,126 @@ port_summary_display(portid_t port_id)
(unsigned int) link.link_speed);
}
+void
+port_eeprom_display(portid_t port_id)
+{
+ struct rte_dev_eeprom_info einfo;
+ int ret;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ print_valid_ports();
+ return;
+ }
+
+ int len_eeprom = rte_eth_dev_get_eeprom_length(port_id);
+
+ if(len_eeprom < 0) {
+ switch (len_eeprom) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get EEPROM: %d\n", len_eeprom);
+ break;
+ }
+ return;
+ }
+
+ char buf[len_eeprom];
+
+ einfo.offset = 0;
+ einfo.length = len_eeprom;
+ einfo.data = buf;
+
+ ret = rte_eth_dev_get_eeprom(port_id, &einfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device is removed\n");
+ break;
+ default:
+ printf("Unable to get EEPROM: %d\n", ret);
+ break;
+ }
+ return;
+ }
+
+ rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ printf("Finish -- Port: %d EEPROM length: %d bytes\n", port_id, len_eeprom);
+}
+
+void
+port_module_eeprom_displao(portid_t port_id)
+{
+ struct rte_eth_dev_module_info minfo;
+ struct rte_dev_eeprom_info einfo;
+ int ret;
+
+ if (port_id_is_invalid(port_id, ENABLED_WARN)) {
+ print_valid_ports();
+ return;
+ }
+
+ ret = rte_eth_dev_get_module_info(port_id, &minfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device Iis removed\n");
+ break;
+ default:
+ printf("Unable to get module info: %d\n", ret);
+ break;
+ }
+ return;
+ }
+
+ char buf[minfo.eeprom_len];
+ einfo.offset = 0;
+ einfo.length = minfo.eeprom_len;
+ einfo.data = buf;
+
+ ret = rte_eth_dev_get_module_eeprom(port_id, &einfo);
+ if (ret != 0) {
+ switch (ret) {
+ case -ENODEV:
+ printf("port index %d invalid\n", port_id);
+ break;
+ case -ENOTSUP:
+ printf("operation not supported by device\n");
+ break;
+ case -EIO:
+ printf("device Iis removed\n");
+ break;
+ default:
+ printf("Unable to get module EEPROM: %d\n", ret);
+ break;
+ }
+ return;
+ }
+
+ rte_hexdump(stdout, "hexdump", einfo.data, einfo.length);
+ printf("Finish -- Port: %d MODULE EEPROM length: %d bytes\n", port_id, einfo.length);
+
+}
+
void
port_offload_cap_display(portid_t port_id)
{
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 7a7c73f79..e3a0d17e5 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -714,6 +714,8 @@ void nic_stats_mapping_display(portid_t port_id);
void device_infos_display(const char *identifier);
void port_infos_display(portid_t port_id);
void port_summary_display(portid_t port_id);
+void port_eeprom_display(portid_t port_id);
+void port_module_eeprom_display(portid_t port_id);
void port_summary_header_display(void);
void port_offload_cap_display(portid_t port_id);
void rx_queue_infos_display(portid_t port_idi, uint16_t queue_id);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 5103ff925..6a2e1c0f2 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -218,6 +218,13 @@ For example:
nvgre
vxlan-gpe
+show port (module_eeprom|eeprom)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Display the module EEPROM/EEPROM informatioon for port_id::
+
+ testpmd> show port (port_id) (module_eeprom|eeprom)
+
show port rss reta
~~~~~~~~~~~~~~~~~~
--
2.17.1
next reply other threads:[~2020-09-08 21:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 21:03 David Liu [this message]
2020-09-10 2:19 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200908210304.31921-1-dliu@iol.unh.edu \
--to=dliu@iol.unh.edu \
--cc=dts@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=lylavoie@iol.unh.edu \
--cc=thomas@monjalon.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).