* [dts] [PATCH V1 1/3]test_plans: add vf single core test plan
2020-11-11 6:26 [dts] [PATCH V1 0/3] add vf single core perf test suite hanyingya
@ 2020-11-11 6:26 ` hanyingya
2020-11-11 6:27 ` [dts] [PATCH V1 2/3]conf: add vf single core configuration file hanyingya
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: hanyingya @ 2020-11-11 6:26 UTC (permalink / raw)
To: dts; +Cc: hanyingya
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
test_plans/vf_single_core_perf_test_plan.rst | 122 +++++++++++++++++++
1 file changed, 122 insertions(+)
create mode 100644 test_plans/vf_single_core_perf_test_plan.rst
diff --git a/test_plans/vf_single_core_perf_test_plan.rst b/test_plans/vf_single_core_perf_test_plan.rst
new file mode 100644
index 00000000..53cf304a
--- /dev/null
+++ b/test_plans/vf_single_core_perf_test_plan.rst
@@ -0,0 +1,122 @@
+.. Copyright (c) <2020>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+======================================================
+Benchmark the performance of VF single core forwarding
+======================================================
+
+Prerequisites
+=============
+
+1. Nic single core performance test requirements:
+
+ 1.1) FVL25G: two dual port FVL25G nics, all installed on the same socket,
+ pick one port per nic.
+ 1.2) NNT10G: four 82599 nics, all installed on the same socket,
+ pick one port per nic.
+ 1.3) CVL100G: one CVL100G nics, all installed on the same socket,
+ pick one port per nic.
+
+2. Software::
+
+ dpdk: git clone http://dpdk.org/git/dpdk
+ scapy: http://www.secdev.org/projects/scapy/
+ dts (next branch): git clone http://dpdk.org/git/tools/dts,
+ then "git checkout next"
+ Trex code: http://trex-tgn.cisco.com/trex/release/v2.84.tar.gz
+ (to be run in stateless Layer 2 mode, see section in
+ Getting Started Guide for more details)
+ python-prettytable:
+ apt install python-prettytable (for ubuntu os)
+ or dnf install python-prettytable (for fedora os).
+
+3. Connect all the selected nic ports to traffic generator(IXIA,TREX,
+ PKTGEN) ports(TG ports)::
+
+ 2 TG 25g ports for FVL25G ports
+ 4 TG 10g ports for 4 NNT10G ports
+ 1 TG 100g ports for CVL100G port
+
+Test Case : Vf Single Core Performance Measurement
+==================================================
+
+1. Bind PF ports to kernel driver, i40e/ixgbe/ice, then create 1 VF from each PF,
+ take XXV710 for example::
+
+ echo 1 > /sys/bus/pci/devices/0000\:af\:00.0/sriov_numvfs
+ echo 1 > /sys/bus/pci/devices/0000\:b1\:00.1/sriov_numvfs
+
+2. Set vf mac address::
+
+ ip link set ens5f0 vf 0 mac 00:12:34:56:78:01
+ ip link set ens6f0 vf 0 mac 00:12:34:56:78:02
+
+3. Bind all the created VFs to dpdk driver, vfio-pci or igb_uio::
+
+ ./usertools/dpdk-devbind.py -b vfio-pci af:02.0 b1:02.0
+
+4. Start testpmd::
+
+ ./dpdk-testpmd -l 28,29 -n 4 -- -i --portmask=0x3 --txd=512 --rxd=512 \
+ --txq=2 --rxq=2 --nb-cores=1
+
+ testpmd> set fwd mac
+ testpmd> start
+
+5. Configure traffic generator to send traffic::
+
+ dst mac: peer nic port mac
+ src ip : random
+ dst ip : fixed
+ frame size: 64 byte
+ transmit rate: 100%
+
+6. Result tables.
+
+ +-----------+------------+---------+-------------+---------+---------------------+
+ | Fwd_core | Frame Size | TXD/RXD | Throughput | Rate | Expected Throughput |
+ +===========+============+=========+=============+=========+=====================+
+ | 1C/1T | 64 | 512 | xxxxx Mpps | xxx % | xxxxxxx Mpps |
+ +-----------+------------+---------+-------------+---------+---------------------+
+ | 1C/1T | 64 | 2048 | xxxxx Mpps | xxx % | xxxxxxx Mpps |
+ +-----------+------------+---------+-------------+---------+---------------------+
+ | 1C/2T | 64 | 512 | xxxxx Mpps | xxx % | xxxxxxx Mpps |
+ +-----------+------------+---------+-------------+---------+---------------------+
+ | 1C/2T | 64 | 2048 | xxxxx Mpps | xxx % | xxxxxxx Mpps |
+ +-----------+------------+---------+-------------+---------+---------------------+
+
+ Check throughput and compare it with the expected value. Case will raise failure
+ if actual throughputs have more than 1Mpps gap from expected ones.
+
+Note :
+ The values for the expected throughput may vary due to different platform and OS,
+ and traffic generator, please correct threshold values accordingly.
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [dts] [PATCH V1 2/3]conf: add vf single core configuration file
2020-11-11 6:26 [dts] [PATCH V1 0/3] add vf single core perf test suite hanyingya
2020-11-11 6:26 ` [dts] [PATCH V1 1/3]test_plans: add vf single core test plan hanyingya
@ 2020-11-11 6:27 ` hanyingya
2020-11-11 6:27 ` [dts] [PATCH V1 3/3]tests: add vf single core test script hanyingya
2020-11-11 6:42 ` [dts] [PATCH V1 0/3] add vf single core perf test suite Tu, Lijuan
3 siblings, 0 replies; 5+ messages in thread
From: hanyingya @ 2020-11-11 6:27 UTC (permalink / raw)
To: dts; +Cc: hanyingya
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
conf/vf_single_core_perf.cfg | 64 ++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
create mode 100644 conf/vf_single_core_perf.cfg
diff --git a/conf/vf_single_core_perf.cfg b/conf/vf_single_core_perf.cfg
new file mode 100644
index 00000000..041faa87
--- /dev/null
+++ b/conf/vf_single_core_perf.cfg
@@ -0,0 +1,64 @@
+# Throughput numbers vary in different environment.
+# Users could change these configuration on demand:
+#
+# - test_parameters defines the combination of frame size and descriptor
+# numbers, and the pattern is
+# {'frame size': ['descriptor number #1', 'descriptor number #2']}
+#
+# - test_duration is how many seconds each combination performance will
+# be recorded.
+#
+# - accepted_tolerance defines the accepted tolerance between test
+# results and expected numbers.
+#
+# - expected_throughput is a dictionary defining expected throughput
+# numbers based on NIC, and the pattern is
+# {'NIC': {'frame size': {'descriptor number': 'excepted throughput'}}}
+# Every user should fill it out with your actual numbers. To keep the
+# expected throughput private, dts takes 0.00 as default.
+#
+# - if update_expected == Ture, and add argument "--update-expected" in
+# bash command, all objects in this file will changed after the run
+# for example: ./dts --update-expected
+#
+# Highlights:
+# At the begining, please change test_parameters according to your
+# requirements, then run ./dts --update-expected to get the absolute
+# results which will replace the default numbers 0.00 in this configuration.
+# So you will have your own private configuration, and could start your
+# tests as ususal.
+
+[suite]
+update_expected = True
+test_parameters = {'1C/1T': {64: [512, 2048]},
+ '1C/2T': {64: [512, 2048]}}
+test_duration = 60
+accepted_tolerance = 1
+expected_throughput = {
+ 'fortville_spirit': {
+ '1C/1T': {64: {512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {512: 0.00, 2048: 0.00}}},
+ 'fortville_eagle': {
+ '1C/1T':{64: {512: 0.00, 2048: 0.00}},
+ '1C/2T':{64: {512: 0.00, 2048: 0.00}}},
+ 'niantic': {
+ '1C/1T': {64: {128: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 512: 0.00, 2048: 0.00}}},
+ 'fortville_25g': {
+ '1C/1T': {64: {512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {512: 0.00, 2048: 0.00}}},
+ 'columbiaville_100g': {
+ '1C/1T': {64: {512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {512: 0.00, 2048: 0.00}}},
+ 'columbiaville_25g': {
+ '1C/1T': {64: {512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {512: 0.00, 2048: 0.00}}},
+ 'ConnectX4_LX_MT4117': {'40G': {
+ '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}},
+ '25G': {
+ '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}},
+ 'ConnectX5_MT4121': {
+ '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
+ '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}}
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread* [dts] [PATCH V1 3/3]tests: add vf single core test script
2020-11-11 6:26 [dts] [PATCH V1 0/3] add vf single core perf test suite hanyingya
2020-11-11 6:26 ` [dts] [PATCH V1 1/3]test_plans: add vf single core test plan hanyingya
2020-11-11 6:27 ` [dts] [PATCH V1 2/3]conf: add vf single core configuration file hanyingya
@ 2020-11-11 6:27 ` hanyingya
2020-11-11 6:42 ` [dts] [PATCH V1 0/3] add vf single core perf test suite Tu, Lijuan
3 siblings, 0 replies; 5+ messages in thread
From: hanyingya @ 2020-11-11 6:27 UTC (permalink / raw)
To: dts; +Cc: hanyingya
Signed-off-by: hanyingya <yingyax.han@intel.com>
---
tests/TestSuite_vf_single_core_perf.py | 399 +++++++++++++++++++++++++
1 file changed, 399 insertions(+)
create mode 100644 tests/TestSuite_vf_single_core_perf.py
diff --git a/tests/TestSuite_vf_single_core_perf.py b/tests/TestSuite_vf_single_core_perf.py
new file mode 100644
index 00000000..57ab7240
--- /dev/null
+++ b/tests/TestSuite_vf_single_core_perf.py
@@ -0,0 +1,399 @@
+#
+# Copyright(c) 2020 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+"""
+
+import utils
+import json
+import os
+from test_case import TestCase
+from settings import HEADER_SIZE, UPDATE_EXPECTED, load_global_setting
+from pmd_output import PmdOutput
+from copy import deepcopy
+import rst
+from pktgen import PacketGeneratorHelper
+
+
+class TestVfSingleCorePerf(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ PMD prerequisites.
+ """
+ # Based on h/w type, choose how many ports to use
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 1, "At least 1 port is required to test")
+ self.socket = self.dut.get_numa_id(self.dut_ports[0])
+ self.vfs_mac = ["00:12:34:56:78:0%d" % (i + 1) for i in self.dut_ports]
+ self.pmdout = PmdOutput(self.dut)
+
+ # set vf assign method and vf driver
+ self.vf_driver = self.get_suite_cfg()['vf_driver']
+ if self.vf_driver is None:
+ self.vf_driver = self.drivername
+
+ # get dts output path
+ if self.logger.log_path.startswith(os.sep):
+ self.output_path = self.logger.log_path
+ else:
+ cur_path = os.path.dirname(
+ os.path.dirname(os.path.realpath(__file__)))
+ self.output_path = os.sep.join([cur_path, self.logger.log_path])
+ # create an instance to set stream field setting
+ self.pktgen_helper = PacketGeneratorHelper()
+
+ # determine if to save test result as a separated file
+ self.save_result_flag = True
+
+ def set_up(self):
+ """
+ Run before each test case.
+ It's more convenient to load suite configuration here than
+ set_up_all in debug mode.
+ """
+ # test parameters include: frames size, descriptor numbers
+ self.test_parameters = self.get_suite_cfg()['test_parameters']
+
+ # traffic duraion in second
+ self.test_duration = self.get_suite_cfg()['test_duration']
+ self.expected_throughput = self.get_suite_cfg()['expected_throughput'][self.nic]
+
+ # Accepted tolerance in Mpps
+ self.gap = self.get_suite_cfg()['accepted_tolerance']
+
+ # header to print test result table
+ self.table_header = ['Fwd_core', 'Frame Size', 'TXD/RXD', 'Throughput', 'Rate',
+ 'Expected Throughput', 'Throughput Difference']
+ self.test_result = {'header': [], 'data': []}
+
+ # initilize throughput attribution
+ self.throughput = {}
+
+ def setup_vf_env(self):
+ """
+ require enough PF ports,using kernel or dpdk driver, create 1 VF from each PF.
+ """
+ self.used_dut_port = [port for port in self.dut_ports]
+ self.sriov_vfs_port = []
+ for i in self.dut_ports:
+ host_driver = self.dut.ports_info[i]['port'].default_driver
+ self.dut.generate_sriov_vfs_by_port(self.used_dut_port[i], 1, driver=host_driver)
+ sriov_vfs_port = self.dut.ports_info[self.used_dut_port[i]]['vfs_port']
+ self.sriov_vfs_port.append(sriov_vfs_port)
+
+ # set vf mac address.
+ for i in self.dut_ports:
+ pf_intf = self.dut.ports_info[i]['port'].get_interface_name()
+ self.dut.send_expect("ip link set %s vf 0 mac %s" % (pf_intf, self.vfs_mac[i]), "#")
+
+ # bind vf to vf driver
+ try:
+ for i in self.dut_ports:
+ for port in self.sriov_vfs_port[i]:
+ port.bind_driver(self.vf_driver)
+ except Exception as e:
+ self.destroy_vf_env()
+ raise Exception(e)
+
+ def destroy_vf_env(self):
+ """
+ destroy the setup VFs
+ """
+ for i in self.dut_ports:
+ self.dut.destroy_sriov_vfs_by_port(self.dut_ports[i])
+
+ def flows(self):
+ """
+ Return a list of packets that implements the flows described in l3fwd.
+ """
+ return [
+ 'IP(src="1.2.3.4",dst="192.18.1.0")',
+ 'IP(src="1.2.3.4",dst="192.18.1.1")',
+ 'IP(src="1.2.3.4",dst="192.18.0.0")',
+ 'IP(src="1.2.3.4",dst="192.18.0.1")',
+ 'IP(src="1.2.3.4",dst="192.18.3.0")',
+ 'IP(src="1.2.3.4",dst="192.18.3.1")',
+ 'IP(src="1.2.3.4",dst="192.18.2.0")',
+ 'IP(src="1.2.3.4",dst="192.18.2.1")']
+
+ def create_pacap_file(self, frame_size, port_num):
+ """
+ Prepare traffic flow
+ """
+ payload_size = frame_size - HEADER_SIZE['ip'] - HEADER_SIZE['eth']
+ pcaps = {}
+ for _port in self.dut_ports:
+ if 1 == port_num:
+ flow = ['Ether(dst="%s")/%s/("X"*%d)' % (self.vfs_mac[_port], self.flows()[_port], payload_size)]
+ pcap = os.sep.join([self.output_path, "dst{0}.pcap".format(_port)])
+ self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, ','.join(flow)))
+ self.tester.scapy_execute()
+ pcaps[_port] = []
+ pcaps[_port].append(pcap)
+ else:
+ index = self.dut_ports[_port]
+ cnt = 0
+ for layer in self.flows()[_port * 2:(_port + 1) * 2]:
+ flow = ['Ether(dst="%s")/%s/("X"*%d)' % (self.vfs_mac[_port], layer, payload_size)]
+ pcap = os.sep.join([self.output_path, "dst{0}_{1}.pcap".format(index, cnt)])
+ self.tester.scapy_append('wrpcap("%s", [%s])' % (pcap, ','.join(flow)))
+ self.tester.scapy_execute()
+ if index not in pcaps:
+ pcaps[index] = []
+ pcaps[index].append(pcap)
+ cnt += 1
+ return pcaps
+
+ def prepare_stream(self, pcaps, port_num):
+ """
+ create streams for ports,one port one stream
+ """
+ tgen_input = []
+ if 1 == port_num:
+ txIntf = self.tester.get_local_port(self.dut_ports[0])
+ rxIntf = txIntf
+ for pcap in pcaps[0]:
+ tgen_input.append((txIntf, rxIntf, pcap))
+ else:
+ for rxPort in range(port_num):
+ if rxPort % port_num == 0 or rxPort ** 2 == port_num:
+ txIntf = self.tester.get_local_port(self.dut_ports[rxPort + 1])
+ port_id = self.dut_ports[rxPort + 1]
+ else:
+ txIntf = self.tester.get_local_port(self.dut_ports[rxPort - 1])
+ port_id = self.dut_ports[rxPort - 1]
+ rxIntf = self.tester.get_local_port(self.dut_ports[rxPort])
+ for pcap in pcaps[port_id]:
+ tgen_input.append((txIntf, rxIntf, pcap))
+ return tgen_input
+
+ def test_perf_vf_single_core(self):
+ """
+ Run nic single core performance
+ """
+ self.setup_vf_env()
+ port_num = len(self.dut_ports)
+ self.perf_test(port_num)
+ self.handle_expected()
+ self.handle_results()
+
+ def handle_expected(self):
+ """
+ Update expected numbers to configurate file: conf/$suite_name.cfg
+ """
+ if load_global_setting(UPDATE_EXPECTED) == "yes":
+ for fwd_config in list(self.test_parameters.keys()):
+ for frame_size in list(self.test_parameters[fwd_config].keys()):
+ for nb_desc in self.test_parameters[fwd_config][frame_size]:
+ self.expected_throughput[fwd_config][frame_size][nb_desc] = \
+ round(self.throughput[fwd_config][frame_size][nb_desc], 3)
+
+ def perf_test(self, port_num):
+ """
+ Single core Performance Benchmarking test
+ """
+ # ports whitelist
+ eal_para = ""
+ for i in range(port_num):
+ eal_para += " -w " + self.sriov_vfs_port[i][0].pci
+ port_mask = utils.create_mask(self.dut_ports)
+ # parameters for application/testpmd
+ param = " --portmask=%s" % (port_mask)
+
+ for fwd_config in list(self.test_parameters.keys()):
+ # the fwd_config just the config for fwd core
+ # to start testpmd should add 1C to it
+ core_config = '1S/%s' % fwd_config
+ thread_num = int(fwd_config[fwd_config.find('/')+1: fwd_config.find('T')])
+ core_list = self.dut.get_core_list(core_config, socket=self.socket)
+ self.verify(len(core_list) >= thread_num, "the Hyper-threading not open, please open it to test")
+
+ # need add one more core for start testpmd
+ core_list = [core_list[0]] + [str(int(i) + 1) for i in core_list]
+
+ self.logger.info("Executing Test Using cores: %s of config %s" % (core_list, fwd_config))
+
+ nb_cores = thread_num
+
+ # fortville has to use 2 queues at least to get the best performance
+ if self.nic in ["fortville_25g", "fortville_spirit"] or thread_num == 2:
+ param += " --rxq=2 --txq=2"
+ # columbiaville use one queue per port for best performance.
+ elif self.nic in ["columbiaville_100g", "columbiaville_25g"]:
+ param += " --rxq=1 --txq=1"
+ # workaround for that testpmd can't forward packets in io forward mode
+ param += " --port-topology=loop"
+
+ self.throughput[fwd_config] = dict()
+ for frame_size in list(self.test_parameters[fwd_config].keys()):
+ self.throughput[fwd_config][frame_size] = dict()
+ pcaps = self.create_pacap_file(frame_size, port_num)
+ tgenInput = self.prepare_stream(pcaps, port_num)
+ for nb_desc in self.test_parameters[fwd_config][frame_size]:
+ self.logger.info("Test running at parameters: " + "framesize: {}, rxd/txd: {}".format(frame_size, nb_desc))
+ parameter = param + " --txd=%d --rxd=%d --nb-cores=%d" % (nb_desc, nb_desc, nb_cores)
+ self.pmdout.start_testpmd(
+ core_list, parameter, eal_para, socket=self.socket)
+ self.dut.send_expect("set fwd mac", "testpmd> ", 15)
+ self.dut.send_expect("start", "testpmd> ", 15)
+
+ vm_config = self.set_fields()
+ # clear streams before add new streams
+ self.tester.pktgen.clear_streams()
+
+ # run packet generator
+ streams = self.pktgen_helper.prepare_stream_from_tginput(tgenInput, 100, vm_config, self.tester.pktgen)
+ # set traffic option
+ traffic_opt = {'duration': self.test_duration}
+ _, packets_received = self.tester.pktgen.measure_throughput(stream_ids=streams, options=traffic_opt)
+ self.verify(packets_received > 0, "No traffic detected")
+ throughput = packets_received / 1000000.0
+ self.throughput[fwd_config][frame_size][nb_desc] = throughput
+
+ self.dut.send_expect("stop", "testpmd> ")
+ self.dut.send_expect("quit", "# ", 30)
+
+ self.verify(throughput, "No traffic detected, please check your configuration")
+ self.logger.info("Trouthput of " + "framesize: {}, rxd/txd: {} is :{} Mpps".format(
+ frame_size, nb_desc, throughput))
+
+ return self.throughput
+
+ def handle_results(self):
+ """
+ results handled process:
+ 1, save to self.test_results
+ 2, create test results table
+ 3, save to json file for Open Lab
+ """
+ # save test results to self.test_result
+ header = self.table_header
+ for fwd_config in list(self.test_parameters.keys()):
+ ret_datas = {}
+ for frame_size in list(self.test_parameters[fwd_config].keys()):
+ wirespeed = self.wirespeed(self.nic, frame_size, len(self.dut_ports))
+ ret_datas[frame_size] = {}
+ for nb_desc in self.test_parameters[fwd_config][frame_size]:
+ ret_data = {}
+ ret_data[header[0]] = fwd_config
+ ret_data[header[1]] = frame_size
+ ret_data[header[2]] = nb_desc
+ ret_data[header[3]] = "{:.3f} Mpps".format(
+ self.throughput[fwd_config][frame_size][nb_desc])
+ ret_data[header[4]] = "{:.3f}%".format(
+ self.throughput[fwd_config][frame_size][nb_desc] * 100 / wirespeed)
+ ret_data[header[5]] = "{:.3f} Mpps".format(
+ self.expected_throughput[fwd_config][frame_size][nb_desc])
+ ret_data[header[6]] = "{:.3f} Mpps".format(
+ self.throughput[fwd_config][frame_size][nb_desc] -
+ self.expected_throughput[fwd_config][frame_size][nb_desc])
+
+ ret_datas[frame_size][nb_desc] = deepcopy(ret_data)
+ self.test_result[fwd_config] = deepcopy(ret_datas)
+
+ # Create test results table
+ self.result_table_create(header)
+ for fwd_config in list(self.test_parameters.keys()):
+ for frame_size in list(self.test_parameters[fwd_config].keys()):
+ for nb_desc in self.test_parameters[fwd_config][frame_size]:
+ table_row = list()
+ for i in range(len(header)):
+ table_row.append(
+ self.test_result[fwd_config][frame_size][nb_desc][header[i]])
+ self.result_table_add(table_row)
+ # present test results to screen
+ self.result_table_print()
+
+ # save test results as a file
+ if self.save_result_flag:
+ self.save_result(self.test_result)
+
+ def save_result(self, data):
+ """
+ Saves the test results as a separated file named with
+ self.nic+_single_core_perf.json in output folder
+ if self.save_result_flag is True
+ """
+ json_obj = dict()
+ case_name = self.running_case
+ json_obj[case_name] = list()
+ status_result = []
+ for fwd_config in list(self.test_parameters.keys()):
+ for frame_size in list(self.test_parameters[fwd_config].keys()):
+ for nb_desc in self.test_parameters[fwd_config][frame_size]:
+ row_in = self.test_result[fwd_config][frame_size][nb_desc]
+ row_dict0 = dict()
+ row_dict0['performance'] = list()
+ row_dict0['parameters'] = list()
+ result_throughput = float(row_in['Throughput'].split()[0])
+ expected_throughput = float(row_in['Expected Throughput'].split()[0])
+ # delta value and accepted tolerance in percentage
+ delta = result_throughput - expected_throughput
+ if delta > -self.gap:
+ row_dict0['status'] = 'PASS'
+ else:
+ row_dict0['status'] = 'FAIL'
+ row_dict1 = dict(name="Throughput", value=result_throughput, unit="Mpps", delta=delta)
+ row_dict2 = dict(name="Txd/Rxd", value=row_in["TXD/RXD"], unit="descriptor")
+ row_dict3 = dict(name="frame_size", value=row_in["Frame Size"], unit="bytes")
+ row_dict4 = dict(name="Fwd_core", value=row_in["Fwd_core"])
+ row_dict0['performance'].append(row_dict1)
+ row_dict0['parameters'].append(row_dict2)
+ row_dict0['parameters'].append(row_dict3)
+ row_dict0['parameters'].append(row_dict4)
+ json_obj[case_name].append(row_dict0)
+ status_result.append(row_dict0['status'])
+ with open(os.path.join(rst.path2Result,
+ '{0:s}_single_core_perf.json'.format(
+ self.nic)), 'w') as fp:
+ json.dump(json_obj, fp)
+ self.verify("FAIL" not in status_result, "Excessive gap between test results and expectations")
+
+ def set_fields(self):
+ """
+ set ip protocol field behavior
+ """
+ fields_config = {'ip': {'src': {'action': 'random'}, }, }
+ return fields_config
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.destroy_vf_env()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.1
^ permalink raw reply [flat|nested] 5+ messages in thread