From: Xueqin Lin <xueqin.lin@intel.com>
To: dts@dpdk.org
Cc: Xueqin Lin <xueqin.lin@intel.com>
Subject: [dts] [PATCH] test_plan/iavf_rss: add co-exist layer3 test case for GTPU
Date: Thu, 19 Nov 2020 12:02:11 -0500 [thread overview]
Message-ID: <20201119170211.13389-1-xueqin.lin@intel.com> (raw)
Signed-off-by: Lin Xueqin <xueqin.lin@intel.com>
---
| 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
--git a/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst b/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
index 551ea96..58ffb03 100644
--- a/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
+++ b/test_plans/cvl_advanced_iavf_rss_gtpu_test_plan.rst
@@ -2514,6 +2514,58 @@ Subcase: IPV6_GTPU_IPV4 and IPV6_GTPU_IPV4_TCP
7. repeat step 2, packet 2 has same hash value with packet 1, packet 3 has different hash value with packet 1.
+Test case: co-exist L3 IPv4/IPv6_GTPU_EH
+========================================
+
+Subcase 1: co-exist L3 IPV4/IPV6_GTPU_EH_IPV4
+---------------------------------------------
+
+Rule 1::
+ flow create 0 ingress pattern eth / ipv4 / udp / gtpu / gtp_psc pdu_t is 0 / ipv4 / end actions rss types ipv4 l3-dst-only end key_len 0 queues end / end
+Rule 2::
+ flow create 0 ingress pattern eth / ipv6 / udp / gtpu / gtp_psc pdu_t is 0 / ipv4 / end actions rss types ipv4 l3-dst-only end key_len 0 queues end / end
+
+Packets::
+
+ pkt1=Ether(dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x34)/IP(dst="192.168.1.1", src="192.168.0.2")/("X"*480)
+ pkt2=Ether(dst="00:11:22:33:44:55")/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x34)/IP(dst="192.168.1.1", src="192.168.0.2")/("X"*480)
+ pkt3=Ether(dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x34)/IP(dst="192.168.1.1", src="192.168.0.3")/("X"*480)
+ pkt4=Ether(dst="00:11:22:33:44:55")/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=0, qos_flow=0x34)/IP(dst="192.168.1.1", src="192.168.0.3")/("X"*480)
+
+1. Rule1 and rule2 only have outer layer 3 difference.
+2. Send rule1 matched pkt1, mark queue id as Q1, use default input to do hash.
+3. Send rule2 matched pkt2, mark queue id as Q2, use default input to do hash.
+4. Create rule 1.
+5. Send rule1 matched pkt1, mark queue id as Q3.
+6. Check Q3 is different from Q1, use rule1 input set to do hash.
+7. Send rule2 matched pkt2, mark queue id as Q4.
+8. Check Q4 is same as Q2, still use default input to do hash, not use rule1 input set.
+9. Send rule1 nomatched pkt3, change src IP address, mark queue id as Q5.
+10. Check Q5 is same as Q3.
+11. Flush flow list.
+12. Create rule 2.
+13. Send rule2 matched pkt2, mark queue id as Q6.
+14. Check Q6 is different from Q2, use rule2 input set to do hash.
+15. Send rule1 matched pkt1, mark queue id as Q7.
+16. Check Q7 is same as Q1, still use default input set to do hash, not use rule2 input set.
+17. Send rule2 nomatched pkt4, change src IP address, mark queue id as Q8.
+18. Check Q8 is same as Q6.
+
+Subcase 2: co-exist L3 IPV4/IPV6_GTPU_EH_IPV6
+---------------------------------------------
+
+Rule 1::
+ flow create 0 ingress pattern eth / ipv4 / udp / gtpu / gtp_psc pdu_t is 1 / ipv6 / end actions rss types ipv6 l3-src-only end key_len 0 queues end / end
+rule 2::
+ flow create 0 ingress pattern eth / ipv6 / udp / gtpu / gtp_psc pdu_t is 1 / ipv6 / end actions rss types ipv6 l3-src-only end key_len 0 queues end / end
+
+Packets::
+
+ pkt1=Ether(dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6(dst="::12", src="::35")/("X"*480)
+ pkt2=Ether(dst="00:11:22:33:44:55")/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6(dst="::12", src="::35")/("X"*480)
+ pkt3=Ether(dst="00:11:22:33:44:55")/IP()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6(dst="::13", src="::35")/("X"*480)
+ pkt4=Ether(dst="00:11:22:33:44:55")/IPv6()/UDP(dport=2152)/GTP_U_Header(gtp_type=255, teid=0x123456)/GTP_PDUSession_ExtensionHeader(pdu_type=1, qos_flow=0x34)/IPv6(dst="::13", src="::35")/("X"*480)
+Test steps are same as subcase 1.
Test case: toeplitz and symmetric rules combination
===================================================
--
2.17.1
next reply other threads:[~2020-11-19 9:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-19 17:02 Xueqin Lin [this message]
2020-11-23 3:11 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201119170211.13389-1-xueqin.lin@intel.com \
--to=xueqin.lin@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).