From: sunqin <qinx.sun@intel.com>
To: dts@dpdk.org
Cc: sunqin <qinx.sun@intel.com>
Subject: [dts] [PATCH V1 6/6] test_plans/cvl_dcf_switch_filter remove 1 case
Date: Fri, 20 Nov 2020 10:45:56 +0000 [thread overview]
Message-ID: <20201120104556.27730-7-qinx.sun@intel.com> (raw)
In-Reply-To: <20201120104556.27730-1-qinx.sun@intel.com>
Remove 1 case:
test_max_rule_number
The case has been moved to 'cvl_limit_value_test' suite
Signed-off-by: sunqin <qinx.sun@intel.com>
---
.../cvl_dcf_switch_filter_test_plan.rst | 57 -------------------
1 file changed, 57 deletions(-)
diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst b/test_plans/cvl_dcf_switch_filter_test_plan.rst
index ff7c4454..55ea726f 100644
--- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
@@ -4157,63 +4157,6 @@ will not hang and provide a friendly output.
check the rules not exist in the list.
send matched packets, check the packets are not to port 1.
-Test case: max rule number
-==========================
-
-Description: 32k switch filter rules can be created on a CVL card,
-and all PFs and VFs share the 32k rules. But the system will first create
-some MAC_VLAN rules in switch table, and as the number of rules increased,
-the hash conflicts in the switch filter table are increased, so we can
-create a total of 32563 switch filter rules on a DCF.
-
-1. create 32563 rules with the same pattern, but different input set::
-
- testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.0 / end actions vf id 1 / end
- testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions vf id 1 / end
- ......
- testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.127.177 / end actions vf id 1 / end
- testpmd> flow list 0
-
- check the rules exist in the list.
-
-2. create one more rule::
-
- testpmd> flow create 0 ingress pattern eth / ipv4 src is 192.168.127.178 / end actions vf id 1 / end
-
- check the rule can not be created successfully, and
- testpmd provide a friendly output, showing::
-
- ice_flow_create(): Failed to create flow
- port_flow_complain(): Caught PMD error type 2 (flow rule (handle)): switch filter create flow fail: Invalid argument
-
-3. check the rule list
-
- testpmd> flow list 0
-
- check the rule in step 2 not exists in the list.
-
-4. send 32563 matched packets for rule 0-32562::
-
- sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.0")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
- sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.0.1")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
- ......
- sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.168.127.177")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
-
- check port 1 receive the 32563 packets.
- send 1 mismatched packet::
-
- sendp([Ether(dst="68:05:ca:8d:ed:a8")/IP(src="192.167.0.1")/TCP(sport=25,dport=23)/("X"*480)], iface="ens786f0", count=1)
-
- check the packet are not to port 1.
-
-5. verify rules can be destroyed::
-
- testpmd> flow flush 0
- testpmd> flow list 0
-
- check the rules not exist in the list.
- send 32563 matched packets, check the packets are not to port 1.
-
Test case: negative cases
=========================
--
2.17.1
next prev parent reply other threads:[~2020-11-20 2:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-20 10:45 [dts] [PATCH V1 0/6] Remove 8 duplicate cases sunqin
2020-11-20 2:16 ` Sun, QinX
2020-11-20 10:45 ` [dts] [PATCH V1 1/6] tests/iavf_fdir remove 6 cases sunqin
2020-11-20 10:45 ` [dts] [PATCH V1 2/6] test_plans/iavf_fdir remove 6 subcases sunqin
2020-11-20 10:45 ` [dts] [PATCH V1 3/6] tests/cvl_fdir remove 1 case sunqin
2020-11-20 10:45 ` [dts] [PATCH V1 4/6] test_plans/cvl_fdir remove 1 subcase sunqin
2020-11-20 10:45 ` [dts] [PATCH V1 5/6] tests/cvl_dcf_switch_filter remove 1 case sunqin
2020-11-20 10:45 ` sunqin [this message]
2020-11-23 3:14 ` [dts] [PATCH V1 0/6] Remove 8 duplicate cases Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201120104556.27730-7-qinx.sun@intel.com \
--to=qinx.sun@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).