* [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
@ 2021-02-23 15:26 Yinan Wang
2021-03-02 2:23 ` Tu, Lijuan
0 siblings, 1 reply; 10+ messages in thread
From: Yinan Wang @ 2021-02-23 15:26 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Add packed ring cbdma test cases.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 228 +++++++++++++-----
1 file changed, 173 insertions(+), 55 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index f0107746..4085351a 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -1,4 +1,4 @@
-.. Copyright (c) <2020>, Intel Corporation
+.. Copyright (c) <2021>, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -42,8 +42,7 @@ This test plan test several features in VM2VM topo:
in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
-3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.
-4. Check function and performance of split ring enqueue operation with multi-CBDMA channels.
+3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring when vhost enqueue operation with multi-CBDMA channels.
Note: For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
Test flow
@@ -65,7 +64,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -76,7 +75,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -120,7 +119,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -131,7 +130,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -161,7 +160,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-7. Check throughput and compare with case1, case2 performance should larger than case1.
+7. Check throughput and compare with case1, CBDMA enable performance should larger than w/o CBDMA performance when cross socket.
Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
=========================================================================
@@ -177,7 +176,7 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -188,7 +187,7 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -232,7 +231,7 @@ Test Case 4: Check split ring virtio-net device capability
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -243,7 +242,7 @@ Test Case 4: Check split ring virtio-net device capability
qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -280,7 +279,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -291,7 +290,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -342,14 +341,22 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+11. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+12. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-12. Check the iperf performance, ensure queue0 can work from vhost side::
+14. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
========================================================================================================================
@@ -365,7 +372,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -376,7 +383,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -427,14 +434,22 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
-11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+11. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+12. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-12. Check the iperf performance, ensure queue0 can work from vhost side::
+14. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
@@ -450,7 +465,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -461,7 +476,62 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+6. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 8: VM2VM packed ring vhost-user/virtio-net CBDMA enable test with tcp traffic
+=======================================================================================
+
+1. Launch the Vhost sample by below commands::
+
+ rm -rf vhost-net*
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1],dmathr=512' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ testpmd>start
+
+2. Launch VM1 and VM2 on socket 1::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -491,7 +561,9 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
+7. Check throughput and compare with case6, CBDMA enable performance should larger than w/o CBDMA performance when cross socket.
+
+Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
==========================================================================
1. Launch the Vhost sample by below commands::
@@ -516,7 +588,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -546,7 +618,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-Test Case 9: Check packed ring virtio-net device capability
+Test Case 10: Check packed ring virtio-net device capability
============================================================
1. Launch the Vhost sample by below commands::
@@ -560,7 +632,7 @@ Test Case 9: Check packed ring virtio-net device capability
qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -571,7 +643,7 @@ Test Case 9: Check packed ring virtio-net device capability
qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -594,21 +666,21 @@ Test Case 9: Check packed ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 10: VM2VM virtio-net packed ring mergeable dynamic queues test with large packet payload valid check
-==============================================================================================================
+Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test with large packet payload valid check
+=====================================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu3.0::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -619,7 +691,7 @@ Test Case 10: VM2VM virtio-net packed ring mergeable dynamic queues test with la
taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -649,36 +721,59 @@ Test Case 10: VM2VM virtio-net packed ring mergeable dynamic queues test with la
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports with 1 queues::
+7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance, ensure queue0 can work from vhost side::
+9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+10. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+11. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+12. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+14. Check the iperf performance, ensure queue0 can work from vhost side::
-Test Case 11: VM2VM virtio-net packed ring non-mergeable dynamic queues test with large packet payload valid check
-===================================================================================================================
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+=========================================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
2. Launch VM1 and VM2 using qemu3.0::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -689,7 +784,7 @@ Test Case 11: VM2VM virtio-net packed ring non-mergeable dynamic queues test wit
taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
@@ -719,17 +814,40 @@ Test Case 11: VM2VM virtio-net packed ring non-mergeable dynamic queues test wit
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-7. Quit vhost ports and relaunch vhost ports with 1 queues::
+7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
8. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-9. Check the iperf performance, ensure queue0 can work from vhost side::
+9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+10. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+11. On VM1, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+12. On VM2, set virtio device::
+
+ ethtool -L ens5 combined 1
+
+13. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+14. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `taskset -c 0 iperf -s -i 1`
- Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
\ No newline at end of file
--
2.25.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
2021-02-23 15:26 [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
@ 2021-03-02 2:23 ` Tu, Lijuan
0 siblings, 0 replies; 10+ messages in thread
From: Tu, Lijuan @ 2021-03-02 2:23 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> Add packed ring cbdma test cases.
>
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>
Applied
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dts] [PATCH V1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
2021-04-07 15:52 [dts] [PATCH V1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
@ 2021-04-08 8:56 ` Tu, Lijuan
0 siblings, 0 replies; 10+ messages in thread
From: Tu, Lijuan @ 2021-04-08 8:56 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> Fix incorrect qemu version usage for packed ring test.
>
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dts] [PATCH V1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
@ 2021-04-07 15:52 Yinan Wang
2021-04-08 8:56 ` Tu, Lijuan
0 siblings, 1 reply; 10+ messages in thread
From: Yinan Wang @ 2021-04-07 15:52 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Fix incorrect qemu version usage for packed ring test.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_net_perf_test_plan.rst | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index 6902bf55..78418e00 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -676,7 +676,7 @@ Test Case 11: VM2VM virtio-net packed ring mergeable 8 queues CBDMA enable test
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu3.0::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -769,7 +769,7 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2 using qemu3.0::
+2. Launch VM1 and VM2::
taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
@@ -850,4 +850,4 @@ Test Case 12: VM2VM virtio-net packed ring non-mergeable 8 queues CBDMA enable t
14. Check the iperf performance, ensure queue0 can work from vhost side::
Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
\ No newline at end of file
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
--
2.25.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
2020-12-15 23:08 [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
@ 2020-12-21 7:28 ` Tu, Lijuan
0 siblings, 0 replies; 10+ messages in thread
From: Tu, Lijuan @ 2020-12-21 7:28 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> Update typo issue.
Applied with commit message changed.
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
@ 2020-12-15 23:08 Yinan Wang
2020-12-21 7:28 ` Tu, Lijuan
0 siblings, 1 reply; 10+ messages in thread
From: Yinan Wang @ 2020-12-15 23:08 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Update typo issue.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
test_plans/vm2vm_virtio_net_perf_test_plan.rst | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index 8fe0c9ac..824cadde 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -112,7 +112,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
+ ./dpdk-testpmd -l 2-4 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1],dmathr=512' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -272,7 +272,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
@@ -323,7 +323,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
@@ -338,7 +338,7 @@ Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test wi
10. Quit vhost ports and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
@@ -357,7 +357,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
@@ -408,7 +408,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
@@ -423,7 +423,7 @@ Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable tes
10. Quit vhost ports and relaunch vhost ports with 1 queues::
- ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ ./dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
testpmd>start
--
2.25.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
2020-12-01 17:25 Yinan Wang
@ 2020-12-07 7:29 ` Tu, Lijuan
0 siblings, 0 replies; 10+ messages in thread
From: Tu, Lijuan @ 2020-12-07 7:29 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> Add feature coverage in VM2VM topology:
> 1. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net
> with split ring and packed ring.
> 2. Check function and performance of split ring enqueue operation with
> multi-CBDMA channels.
>
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>
Applied
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
@ 2020-12-01 17:25 Yinan Wang
2020-12-07 7:29 ` Tu, Lijuan
0 siblings, 1 reply; 10+ messages in thread
From: Yinan Wang @ 2020-12-01 17:25 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Add feature coverage in VM2VM topology:
1. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.
2. Check function and performance of split ring enqueue operation with multi-CBDMA channels.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 293 ++++++++++++------
1 file changed, 206 insertions(+), 87 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index a5692d4b..8fe0c9ac 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -37,12 +37,14 @@ vm2vm vhost-user/virtio-net test plan
Description
===========
-This test plan test vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP
-stack enabled environment and UFO/cksum in the UDP/IP stack enabled environment with vm2vm split ring
-and packed ring vhost-user/virtio-net mergeable path. Also add case to check the payload of large packet
-is valid with vm2vm split ring and packed ring vhost-user/virtio-net mergeable and non-mergeable.
-Meanwhile, this plan also check function and performance of split ring enqueue operation with CBDMA channels.
-For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
+This test plan test several features in VM2VM topo:
+1. Check Vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP stack and UFO/cksum
+in the UDP/IP stack with vm2vm split ring and packed ring vhost-user/virtio-net mergeable path.
+2. Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
+and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+3. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.
+4. Check function and performance of split ring enqueue operation with multi-CBDMA channels.
+Note: For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
Test flow
=========
@@ -55,7 +57,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -93,25 +95,24 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
-5. Check the iperf performance between two VMs by below commands::
+5. Check the iperf performance with different packet size between two VMs by below commands::
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-6. Check both 2VMs can receive and send big packets to each other::
+6. Check 2VMs can receive and send big packets to each other::
testpmd>show port xstats all
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-
Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
======================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1],dmathr=512' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -141,12 +142,12 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.2
+ ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.8
+ ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
5. Check the iperf performance between two VMs by below commands::
@@ -154,7 +155,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp t
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-6. Check both 2VMs can receive and send big packets to each other::
+6. Check 2VMs can receive and send big packets to each other::
testpmd>show port xstats all
Port 0 should have tx packets above 1522
@@ -168,7 +169,7 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
@@ -185,7 +186,7 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -211,7 +212,7 @@ Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
Under VM1, run: `iperf -s -u -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 30 -P 4 -u -b 1G -l 9000`
-6. Check both 2VMs can receive and send big packets to each other::
+6. Check 2VMs can receive and send big packets to each other::
testpmd>show port xstats all
Port 0 should have tx packets above 1522
@@ -223,7 +224,7 @@ Test Case 4: Check split ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -265,109 +266,183 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable CBDMA enable test with large packet payload valid check
-==========================================================================================================
+Test Case 5: VM2VM virtio-net split ring mergeable 8 queues CBDMA enable test with large packet payload valid check
+====================================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@80:04.0],dmathr=0' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@80:04.1],dmathr=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 using qemu3.0::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.2
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.8
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
-5. Scp 64KB file form VM1 to VM2::
+5. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-Test Case 6: VM2VM virtio-net split ring non-mergeable CBDMA enable test with large packet payload valid check
-==============================================================================================================
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+8. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+10. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+12. Check the iperf performance, ensure queue0 can work from vhost side::
+
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+
+Test Case 6: VM2VM virtio-net split ring non-mergeable 8 queues CBDMA enable test with large packet payload valid check
+========================================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@80:04.1],dmathr=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@00:04.0;txq1@00:04.1;txq2@00:04.2;txq3@00:04.3;txq4@00:04.4;txq5@00:04.5;txq6@00:04.6;txq7@00:04.7],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@80:04.0;txq1@80:04.1;txq2@80:04.2;txq3@80:04.3;txq4@80:04.4;txq5@80:04.5;txq6@80:04.6;txq7@80:04.7],dmathr=512' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 using qemu3.0::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.2
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.8
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
-5. Scp 64KB file form VM1 to VM2::
+5. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Quit vhost ports and relaunch vhost ports w/o CBDMA channels::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
+ testpmd>start
+
+8. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+9. Check the iperf performance and compare with CBDMA enable performance, ensure CMDMA enable performance is higher::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+10. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+11. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+12. Check the iperf performance, ensure queue0 can work from vhost side::
+
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+
Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
==========================================================================
1. Launch the Vhost sample by below commands::,packed=on
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -410,7 +485,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Under VM1, run: `iperf -s -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-6. Check both 2VMs can receive and send big packets to each other::
+6. Check 2VMs can receive and send big packets to each other::
testpmd>show port xstats all
Port 0 should have tx packets above 1522
@@ -422,7 +497,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -465,7 +540,7 @@ Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
Under VM1, run: `iperf -s -u -i 1`
Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 30 -P 4 -u -b 1G -l 9000`
-6. Check both 2VMs can receive and send big packets to each other::
+6. Check 2VMs can receive and send big packets to each other::
testpmd>show port xstats all
Port 0 should have tx packets above 1522
@@ -477,7 +552,7 @@ Test Case 9: Check packed ring virtio-net device capability
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- testpmd>./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ ./dpdk-testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
@@ -519,98 +594,142 @@ Test Case 9: Check packed ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 10: VM2VM packed ring virtio-net mergeable with large packet payload valid check
-==========================================================================================
+Test Case 10: VM2VM virtio-net packed ring mergeable dynamic queues test with large packet payload valid check
+==============================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 using qemu3.0::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.2
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.8
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
-5. Scp 64KB file form VM1 to VM2::
+5. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-Test Case 11: VM2VM packed ring virtio-net non-mergeable with large packet payload valid check
-==============================================================================================
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+8. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+9. Check the iperf performance, ensure queue0 can work from vhost side::
+
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
+
+Test Case 11: VM2VM virtio-net packed ring non-mergeable dynamic queues test with large packet payload valid check
+===================================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 using qemu3.0::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
3. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.2
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
arp -s 1.1.1.8 52:54:00:00:00:02
4. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens3 1.1.1.8
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
arp -s 1.1.1.2 52:54:00:00:00:01
-5. Scp 64KB file form VM1 to VM2::
+5. Scp 1MB file form VM1 to VM2::
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+6. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+ ./dpdk-testpmd -l 1-5 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8' -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
+
+8. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+9. Check the iperf performance, ensure queue0 can work from vhost side::
+
+ Under VM1, run: `taskset -c 0 iperf -s -i 1`
+ Under VM2, run: `taskset -c 0 iperf -c 1.1.1.2 -i 1 -t 60`
--
2.25.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
2020-11-24 17:00 Yinan Wang
@ 2020-11-26 8:21 ` Tu, Lijuan
0 siblings, 0 replies; 10+ messages in thread
From: Tu, Lijuan @ 2020-11-26 8:21 UTC (permalink / raw)
To: Wang, Yinan, dts; +Cc: Wang, Yinan
> Delete vhost dequeue zero copy test cases since this feature has been
> removed in 20.11.
> Add split ring cbdma enable test and check the performance.
>
> Signed-off-by: Yinan Wang <yinan.wang@intel.com>
Applied
^ permalink raw reply [flat|nested] 10+ messages in thread
* [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst
@ 2020-11-24 17:00 Yinan Wang
2020-11-26 8:21 ` Tu, Lijuan
0 siblings, 1 reply; 10+ messages in thread
From: Yinan Wang @ 2020-11-24 17:00 UTC (permalink / raw)
To: dts; +Cc: Yinan Wang
Delete vhost dequeue zero copy test cases since this feature has been removed in 20.11.
Add split ring cbdma enable test and check the performance.
Signed-off-by: Yinan Wang <yinan.wang@intel.com>
---
.../vm2vm_virtio_net_perf_test_plan.rst | 120 +++++-------------
1 file changed, 34 insertions(+), 86 deletions(-)
diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
index 2988e174..a5692d4b 100644
--- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
+++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
@@ -40,8 +40,9 @@ Description
This test plan test vhost tx offload (TSO and UFO) function by verifing the TSO/cksum in the TCP/IP
stack enabled environment and UFO/cksum in the UDP/IP stack enabled environment with vm2vm split ring
and packed ring vhost-user/virtio-net mergeable path. Also add case to check the payload of large packet
-is valid with vm2vm split ring and packed ring vhost-user/virtio-net mergeable and non-mergeable dequeue
-zero copy test. For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
+is valid with vm2vm split ring and packed ring vhost-user/virtio-net mergeable and non-mergeable.
+Meanwhile, this plan also check function and performance of split ring enqueue operation with CBDMA channels.
+For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > v5.1.
Test flow
=========
@@ -51,16 +52,16 @@ Virtio-net <-> Vhost <-> Testpmd <-> Vhost <-> Virtio-net
Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
=========================================================================
-1. Launch the Vhost sample by below commands::
+1. Launch the Vhost sample on socket 0 by below commands::
rm -rf vhost-net*
./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
--vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 on socket 1::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -71,7 +72,7 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -104,19 +105,19 @@ Test Case 1: VM2VM split ring vhost-user/virtio-net test with tcp traffic
Port 1 should have rx packets above 1522
-Test Case 2: VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
-===========================================================================================
+Test Case 2: VM2VM split ring vhost-user/virtio-net CBDMA enable test with tcp traffic
+======================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@00:04.0],dmathr=512' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@00:04.1],dmathr=512' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
-2. Launch VM1 and VM2::
+2. Launch VM1 and VM2 on socket 1::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -127,7 +128,7 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
-numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
@@ -159,6 +160,8 @@ Test Case 2: VM2VM split ring vhost-user/virtio-net dequeue zero-copy test with
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
+7. Check throughput and compare with case1, case2 performance should larger than case1.
+
Test Case 3: VM2VM split ring vhost-user/virtio-net test with udp traffic
=========================================================================
@@ -262,14 +265,14 @@ Test Case 4: Check split ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 5: VM2VM virtio-net split ring mergeable zero copy test with large packet payload valid check
-=======================================================================================================
+Test Case 5: VM2VM virtio-net split ring mergeable CBDMA enable test with large packet payload valid check
+==========================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0@80:04.0],dmathr=0' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@80:04.1],dmathr=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -310,14 +313,14 @@ Test Case 5: VM2VM virtio-net split ring mergeable zero copy test with large pac
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-Test Case 6: VM2VM virtio-net split ring non-mergeable zero copy test with large packet payload valid check
-===========================================================================================================
+Test Case 6: VM2VM virtio-net split ring non-mergeable CBDMA enable test with large packet payload valid check
+==============================================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0@80:04.1],dmathr=0' -- -i --nb-cores=2 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -413,62 +416,7 @@ Test Case 7: VM2VM packed ring vhost-user/virtio-net test with tcp traffic
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-Test Case 8: VM2VM packed ring vhost-user/virtio-net dequeue zero-copy test with tcp traffic
-============================================================================================
-
-1. Launch the Vhost sample by below commands::
-
- rm -rf vhost-net*
- ./testpmd -l 2-4 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=2 --txd=1024 --rxd=1024
- testpmd>start
-
-2. Launch VM1 and VM2::
-
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
-
-3. On VM1, set virtio device IP and run arp protocal::
-
- ifconfig ens3 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
-
-4. On VM2, set virtio device IP and run arp protocal::
-
- ifconfig ens3 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
-
-5. Check the iperf performance between two VMs by below commands::
-
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
-
-6. Check both 2VMs can receive and send big packets to each other::
-
- testpmd>show port xstats all
- Port 0 should have tx packets above 1522
- Port 1 should have rx packets above 1522
-
-Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
+Test Case 8: VM2VM packed ring vhost-user/virtio-net test with udp traffic
==========================================================================
1. Launch the Vhost sample by below commands::
@@ -523,7 +471,7 @@ Test Case 9: VM2VM packed ring vhost-user/virtio-net test with udp traffic
Port 0 should have tx packets above 1522
Port 1 should have rx packets above 1522
-Test Case 10: Check packed ring virtio-net device capability
+Test Case 9: Check packed ring virtio-net device capability
============================================================
1. Launch the Vhost sample by below commands::
@@ -571,14 +519,14 @@ Test Case 10: Check packed ring virtio-net device capability
tx-tcp-ecn-segmentation: on
tx-tcp6-segmentation: on
-Test Case 11: VM2VM packed ring virtio-net mergeable dequeue zero copy test with large packet payload valid check
-=================================================================================================================
+Test Case 10: VM2VM packed ring virtio-net mergeable with large packet payload valid check
+==========================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
@@ -619,14 +567,14 @@ Test Case 11: VM2VM packed ring virtio-net mergeable dequeue zero copy test with
Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
-Test Case 12: VM2VM packed ring virtio-net non-mergeable dequeue zero copy test with large packet payload valid check
-=====================================================================================================================
+Test Case 11: VM2VM packed ring virtio-net non-mergeable with large packet payload valid check
+==============================================================================================
1. Launch the Vhost sample by below commands::
rm -rf vhost-net*
- ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1,dequeue-zero-copy=1' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dequeue-zero-copy=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./testpmd -c 0xF0000000 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,queues=1' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
2. Launch VM1 and VM2::
--
2.25.1
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2021-04-08 8:56 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-23 15:26 [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
2021-03-02 2:23 ` Tu, Lijuan
-- strict thread matches above, loose matches on Subject: below --
2021-04-07 15:52 [dts] [PATCH V1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
2021-04-08 8:56 ` Tu, Lijuan
2020-12-15 23:08 [dts] [PATCH v1] test_plans/vm2vm_virtio_net_perf_test_plan.rst Yinan Wang
2020-12-21 7:28 ` Tu, Lijuan
2020-12-01 17:25 Yinan Wang
2020-12-07 7:29 ` Tu, Lijuan
2020-11-24 17:00 Yinan Wang
2020-11-26 8:21 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).