From: Peng Yuan <yuan.peng@intel.com>
To: dts@dpdk.org
Cc: Peng Yuan <yuan.peng@intel.com>
Subject: [dts] [PATCH V1]test_plans/cvl_dcf_switch_filter_test_plan.rst: modify the mask value in testplan
Date: Fri, 6 Aug 2021 01:55:24 +0000 [thread overview]
Message-ID: <20210806015524.83408-1-yuan.peng@intel.com> (raw)
the ipv4 pattern, when the action is drop, and the mask is not
255.255.255.255, the rule created is as a acl rule. only the acl rule
table is full, the rule is created as switch rule.
when the mask is 255.255.255.255, the rule is created as switch rule.
so modify all the mask to 255.255.255.255 when the action is drop.
Signed-off-by: Peng Yuan <yuan.peng@intel.com>
diff --git a/test_plans/cvl_dcf_switch_filter_test_plan.rst b/test_plans/cvl_dcf_switch_filter_test_plan.rst
index 65b2ccfa..116b2cca 100644
--- a/test_plans/cvl_dcf_switch_filter_test_plan.rst
+++ b/test_plans/cvl_dcf_switch_filter_test_plan.rst
@@ -3236,7 +3236,7 @@ Subcase 2: DCF DROP IPV4 SRC SPEC MASK PACKAGES
1. validate a rule::
- testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 240.0.0.0 / end actions drop / end
+ testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 255.255.255.255 / end actions drop / end
get the message::
@@ -3250,14 +3250,14 @@ Subcase 2: DCF DROP IPV4 SRC SPEC MASK PACKAGES
2. create MAC_IPV4_SRC_SPEC_PAY rule::
- testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 240.0.0.0 / end actions drop / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 255.255.255.255 / end actions drop / end
testpmd> flow list 0
check the rule exists in the list.
3. send matched packets::
- sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="239.0.0.0")/TCP()/Raw("x"*80)],iface="enp27s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="224.0.0.0")/TCP()/Raw("x"*80)],iface="enp27s0f0")
check port can't receive the packet.
@@ -3545,7 +3545,7 @@ Subcase 8: DCF DROP blend PACKAGES
1. validate a rule::
testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions drop / end
- testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 240.0.0.0 / end actions drop / end
+ testpmd> flow validate 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 255.255.255.255 / end actions drop / end
testpmd> flow validate 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions drop / end
testpmd> flow validate 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
testpmd> flow validate 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions drop / end
@@ -3566,7 +3566,7 @@ Subcase 8: DCF DROP blend PACKAGES
2. create rule::
testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.1 / end actions drop / end
- testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 240.0.0.0 / end actions drop / end
+ testpmd> flow create 0 ingress pattern eth / ipv4 dst spec 224.0.0.0 dst mask 255.255.255.255 / end actions drop / end
testpmd> flow create 0 ingress pattern eth / ipv4 dst is 192.168.0.1 / nvgre tni is 2 / eth / ipv4 src is 192.168.1.2 dst is 192.168.1.3 / end actions drop / end
testpmd> flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / vlan tci is 1 / pppoes seid is 3 / pppoe_proto_id is 0x0021 / end actions drop / end
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / pfcp s_field is 0 / end actions drop / end
@@ -3579,7 +3579,7 @@ Subcase 8: DCF DROP blend PACKAGES
3. send matched packets::
sendp([Ether()/IP(src="192.168.0.1")/Raw("x"*80)],iface="enp27s0f0")
- sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="239.0.0.0")/TCP()/Raw("x"*80)],iface="enp27s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/IP(dst="224.0.0.0")/TCP()/Raw("x"*80)],iface="enp27s0f0")
sendp([Ether()/IP(dst="192.168.0.3")/NVGRE(TNI=2)/Ether()/IP(src="192.168.1.2", dst="192.168.1.3")/Raw("x"*80)],iface="enp27s0f0")
sendp([Ether(dst="00:11:22:33:44:55",type=0x8100)/Dot1Q(vlan=1,type=0x8864)/PPPoE(sessionid=3)/PPP(b'\\x00\\x21')/IP()/Raw("x" * 80)],iface="enp27s0f0")
sendp(Ether(dst="00:11:22:33:44:11")/IP()/UDP(dport=8805)/PFCP(S=0),iface="enp27s0f0")
--
2.17.1
reply other threads:[~2021-08-06 8:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210806015524.83408-1-yuan.peng@intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).