From: Lingli Chen <linglix.chen@intel.com>
To: dts@dpdk.org
Cc: Lingli Chen <linglix.chen@intel.com>
Subject: [dts] [PATCH V1 2/3] test_plans/generic_flow_api: add two test cases
Date: Wed, 25 Aug 2021 18:30:33 +0000 [thread overview]
Message-ID: <20210825183034.63754-3-linglix.chen@intel.com> (raw)
In-Reply-To: <20210825183034.63754-1-linglix.chen@intel.com>
add new Test case: create same rule after destroy/ create different rule after destroy.
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/generic_flow_api_test_plan.rst | 46 +++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index 71f16187..d1fa33bd 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -1996,3 +1996,49 @@ Test case: Dual vlan(QinQ)
3). send packet as step 2 with changed ivlan id, got hash value and queue value that output from the testpmd on DUT, the value should be
different with the values in step 2 & step 1) & step 2).
+
+Test case: create same rule after destroy
+=========================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create same rule after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+
+3. send match and mismatch packets to check if rule work::
+
+ pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
+ pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+ verify match pkt1 to queue 2, verify mismatch pkt2 to queue 0.
+
+Test case: create different rule after destroy
+==============================================
+
+1. Launch the app ``testpmd`` with the following arguments::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4,5,6,7,8 -n 4 -- -i --disable-rss --rxq=16 --txq=16
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+ testpmd> start
+
+2. create different rule after destroy::
+
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp src is 32 / end actions queue index 2 / end
+ testpmd>flow destroy 0 rule 0
+ testpmd>flow create 0 ingress pattern eth / ipv4 / udp dst is 32 / end actions queue index 2 / end
+
+3. send match and mismatch packets to check if rule work::
+
+ pkt1 = Ether()/IP()/UDP(sport=32)/Raw('x' * 20)
+ pkt2 = Ether()/IP()/UDP(dport=32)/Raw('x' * 20)
+
+ verify match pkt2 to queue 2, verify mismatch pkt1 to queue 0.
--
2.32.0
next prev parent reply other threads:[~2021-08-25 10:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-25 18:30 [dts] [PATCH V1 0/3] generic_flow_api: " Lingli Chen
2021-08-25 18:30 ` [dts] [PATCH V1 1/3] conf/test_case_checklist: add two cases about nic not support Lingli Chen
2021-08-25 18:30 ` Lingli Chen [this message]
2021-08-30 6:06 ` [dts] [PATCH V1 2/3] test_plans/generic_flow_api: add two test cases Lin, Xueqin
2021-08-25 18:30 ` [dts] [PATCH V1 3/3] tests/generic_flow_api: " Lingli Chen
2021-08-30 6:06 ` Lin, Xueqin
2021-08-26 2:14 ` [dts] [PATCH V1 0/3] generic_flow_api: " Chen, LingliX
2021-09-03 4:51 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210825183034.63754-3-linglix.chen@intel.com \
--to=linglix.chen@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).