From: Weiyuan Li <weiyuanx.li@intel.com>
To: dts@dpdk.org, lijuan.tu@intel.com
Cc: Weiyuan Li <weiyuanx.li@intel.com>
Subject: [dts][PATCH V2 2/2] test_plans/generic_flow_api_test_plan:remove dpdk code modification.
Date: Thu, 10 Feb 2022 17:30:59 +0800 [thread overview]
Message-ID: <20220210093059.31049-2-weiyuanx.li@intel.com> (raw)
In-Reply-To: <20220210093059.31049-1-weiyuanx.li@intel.com>
Sync modify the test plan remove dpdk code modification.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
v2:
-Modify number of dpdk-testpmd cores in the test plan.
test_plans/generic_flow_api_test_plan.rst | 28 +++++++++--------------
1 file changed, 11 insertions(+), 17 deletions(-)
diff --git a/test_plans/generic_flow_api_test_plan.rst b/test_plans/generic_flow_api_test_plan.rst
index c4c0301e..98baec62 100644
--- a/test_plans/generic_flow_api_test_plan.rst
+++ b/test_plans/generic_flow_api_test_plan.rst
@@ -2213,20 +2213,14 @@ the packet are not received on the queue 2::
testpmd> stop
-Test Case: 128 queues
+Test Case: 64 queues
========================
-This case is designed for NIC(niantic). Since NIC(niantic) has 128 transmit
-queues, it should be supports 128 kinds of filter if Hardware have enough
-cores.
-DPDK enable 64 queues in ixgbe driver by default. Enlarge queue number to 128
-for 128 queues test::
-
- sed -i -e 's/#define IXGBE_NONE_MODE_TX_NB_QUEUES 64$/#define IXGBE_NONE_MODE_TX_NB_QUEUES 128/' drivers/net/ixgbe/ixgbe_ethdev.h
+This case is designed for NIC(niantic). Default use 64 queues for test
Launch the app ``testpmd`` with the following arguments::
- ./dpdk-testpmd -l 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53 -n 4 -- -i --disable-rss --rxq=128 --txq=128 --portmask=0x3 --nb-cores=4 --total-num-mbufs=263168
+ ./dpdk-testpmd -l 1,2,3,4,5 -n 4 -- -i --disable-rss --rxq=64 --txq=64 --portmask=0x3 --nb-cores=4 --total-num-mbufs=263168
testpmd>set stat_qmap rx 0 0 0
testpmd>set stat_qmap rx 1 0 0
@@ -2235,17 +2229,17 @@ Launch the app ``testpmd`` with the following arguments::
testpmd>vlan set filter off 0
testpmd>vlan set filter off 1
-Create the 5-tuple Filters with different queues (64,127) on port 0 for
+Create the 5-tuple Filters with different queues (32,63) on port 0 for
niantic::
- testpmd> set stat_qmap rx 0 64 1
- testpmd> flow create 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is 1 src is 1 / end actions queue index 64 / end
- testpmd> set stat_qmap rx 0 127 2
- testpmd> flow create 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is 2 src is 1 / end actions queue index 127 / end
+ testpmd> set stat_qmap rx 0 32 1
+ testpmd> flow create 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is 1 src is 1 / end actions queue index 32 / end
+ testpmd> set stat_qmap rx 0 63 2
+ testpmd> flow create 0 ingress pattern eth / ipv4 dst is 2.2.2.5 src is 2.2.2.4 / tcp dst is 2 src is 1 / end actions queue index 63 / end
Send packets(`dst_ip` = 2.2.2.5 `src_ip` = 2.2.2.4 `dst_port` = 1 `src_port` =
1 `protocol` = tcp) and (`dst_ip` = 2.2.2.5 `src_ip` = 2.2.2.4 `dst_port` = 2
`src_port` = 1 `protocol` = tcp ). Then reading the stats for port 0 after
-sending packets. packets are received on the queue 64 and queue 127 When
-setting 5-tuple Filter with queue(128), it will display failure because the
-number of queues no more than 128.
+sending packets. packets are received on the queue 32 and queue 63 When
+setting 5-tuple Filter with queue(64), it will display failure because the
+number of queues no more than 64.
--
2.27.0
next prev parent reply other threads:[~2022-02-09 6:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 9:30 [dts][PATCH V2 1/2] tests/TestSuite_generic_flow_api:remove " Weiyuan Li
2022-02-10 9:30 ` Weiyuan Li [this message]
2022-02-09 16:10 ` [dts][PATCH V2 2/2] test_plans/generic_flow_api_test_plan:remove " Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220210093059.31049-2-weiyuanx.li@intel.com \
--to=weiyuanx.li@intel.com \
--cc=dts@dpdk.org \
--cc=lijuan.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).