Add vm2vm_virtio_user_dsa_test_plan.rst into test_plans. Signed-off-by: Wei Ling --- .../vm2vm_virtio_user_dsa_test_plan.rst | 1536 +++++++++++++++++ 1 file changed, 1536 insertions(+) create mode 100644 test_plans/vm2vm_virtio_user_dsa_test_plan.rst diff --git a/test_plans/vm2vm_virtio_user_dsa_test_plan.rst b/test_plans/vm2vm_virtio_user_dsa_test_plan.rst new file mode 100644 index 00000000..99ae37a2 --- /dev/null +++ b/test_plans/vm2vm_virtio_user_dsa_test_plan.rst @@ -0,0 +1,1536 @@ +.. Copyright (c) <2022>, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + - Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + OF THE POSSIBILITY OF SUCH DAMAGE. + +====================================================== +VM2VM vhost-user/virtio-user with DSA driver test plan +====================================================== + +Description +=========== +Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way. +In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA +channels and one DMA channel can be shared by multiple vrings at the same time.Vhost enqueue operation with CBDMA channels is supported +in both split and packed ring. + +This document provides the test plan for testing the following features when Vhost-user using asynchronous data path with +DSA driver (kernel IDXD driver and DPDK vfio-pci driver) in VM2VM virtio-user topology. +1. Split virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vector_rx path test and payload check. +2. Packed virtqueue vm2vm in-order mergeable, in-order non-mergeable, mergeable, non-mergeable, vectorized path (ringsize not powerof 2) test and payload check. +3. Test indirect descriptor feature. For example, the split ring mergeable inorder path use non-indirect descriptor, the 2000,2000,2000,2000 chain packets will need 4 consequent ring, still need one ring put header. +the split ring mergeable path use indirect descriptor, the 2000,2000,2000,2000 chain packets will only occupy one ring. + +IOMMU impact: +If iommu off, idxd can work with iova=pa +If iommu on, kernel dsa driver only can work with iova=va by program IOMMU, can't use iova=pa(fwd not work due to pkts payload wrong). + +Note: +1.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may +exceed IOMMU's max capability, better to use 1G guest hugepage. +2.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated. + +Prerequisites +============= + +Topology +-------- + Test flow: Virtio-user -> Vhost-user -> Testpmd -> Vhost-user -> Virtio-user + +General set up +-------------- +1. Compile DPDK:: + + # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library= + # ninja -C -j 110 + For example, + CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc + ninja -C x86_64-native-linuxapp-gcc -j 110 + +2. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs:: + + # ./usertools/dpdk-devbind.py -s + + Network devices using kernel driver + =================================== + 0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci + + DMA devices using kernel driver + =============================== + 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci + 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci + +Test case +========= + +Common steps +------------ +1. Bind DSA devices to DPDK vfio-pci driver:: + + # ./usertools/dpdk-devbind.py -b vfio-pci + + For example, bind 2 DMA devices to vfio-pci driver: + # ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 + +.. note:: + + One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and + eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8: + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i + +2. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ):: + + # ./usertools/dpdk-devbind.py -b idxd + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q + +.. note:: + + Better to reset WQ when need operate DSA devices that bound to idxd drvier: + # ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset + You can check it by 'ls /dev/dsa' + numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0 + numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8 + + For example, bind 2 DMA devices to idxd driver and configure WQ: + + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2 + Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3" + +Test Case 1: VM2VM vhost-user/virtio-user split ring non-mergeable path and multi-queues payload check with dsa dpdk driver +---------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring non-mergeable path +and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 2 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=2 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with pa mode by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=4 -a 0000:ec:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q3,lcore2@0000:ec:01.0-q3] + +9. Rerun step 4. + +10. Virtio-user0 and send packets again:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 2: VM2VM vhost-user/virtio-user split ring inorder non-mergeable path and multi-queues payload check with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring inorder +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 3 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=2 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q0,lcore2@0000:f1:01.0-q0] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with pa mode by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0,max_queues=4 -a 0000:f1:01.0,max_queues=4 -a 0000:f6:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q2,lcore2@0000:ec:01.0-q2,lcore2@0000:f1:01.0-q2] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 3: VM2VM vhost-user/virtio-user split ring inorder mergeable path and multi-queues non-indirect descriptor with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------------------ +This case uses testpmd to test the payload is valid and non-indirect descriptor after packets forwarding in vhost-user/virtio-user +split ring inorder mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 4 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=3 -a 0000:f6:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@0000:f1:01.0-q2,lcore2@0000:f6:01.0-q3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the non-indirect descriptors, the 8k length pkt will occupies 5 ring:2000,2000,2000,2000 will need 4 consequent ring, +still need one ring put header. So check 504 packets and 48128 bytes received by virtio-user1 and 502 packets with 64 length and 2 packets with 8K length in pdump-virtio-rx.pcap. + +7. Relaunch vhost with pa mode by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=3 -a 0000:f6:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@0000:f1:01.0-q2,lcore2@0000:f6:01.0-q3] + +8. Rerun step 3-6. + +Test Case 4: VM2VM vhost-user/virtio-user split ring mergeable path and multi-queues indirect descriptor with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user +split ring mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 4 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=3 -a 0000:f6:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@0000:f1:01.0-q2,lcore2@0000:f6:01.0-q3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. + +7. Relaunch vhost with pa mode by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=1 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=3 -a 0000:f6:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@0000:f1:01.0-q2,lcore2@0000:f6:01.0-q3] + +8. Rerun step 3-6. + +Test Case 5: VM2VM vhost-user/virtio-user packed ring non-mergeable path and multi-queues payload check with dsa dpdk driver +-------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 3 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@0000:f1:01.0-q2] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with iova=pa by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q4,lcore2@0000:ec:01.0-q5,lcore2@0000:f1:01.0-q6] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 6: VM2VM vhost-user/virtio-user packed ring inorder non-mergeable path and multi-queues payload check with dsa dpdk driver +------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 4 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 f1:01.0 f6:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=2 -a 0000:ec:01.0,max_queues=2 -a 0000:f1:01.0,max_queues=2 -a 0000:f6:01.0,max_queues=2 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q0,lcore2@0000:f1:01.0-q1,lcore2@0000:f6:01.0-q1] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with iova=pa by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q5,lcore2@0000:ec:01.0-q6,lcore2@0000:f1:01.0-q5,lcore2@0000:f6:01.0-q6] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + +11. Rerun step 6. + +Test Case 7: VM2VM vhost-user/virtio-user packed ring mergeable path and multi-queues payload check with dsa dpdk driver +-------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring +mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 2 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0,max_queues=4 -a 0000:ec:01.0,max_queues=4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:e7:01.0-q2,lcore2@0000:ec:01.0-q0,lcore2@0000:ec:01.0-q1] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 check 502 packets and 279232 bytes and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with iova=pa by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q6,lcore2@0000:e7:01.0-q7,lcore2@0000:ec:01.0-q2,lcore2@0000:ec:01.0-q3,lcore2@0000:ec:01.0-q4] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +11. Rerun step 6. + +Test Case 8: VM2VM vhost-user/virtio-user packed ring inorder mergeable path and multi-queues payload check with dsa dpdk driver +---------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder +mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test. + +1. bind 8 dsa device to vfio-pci like common step 1:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore2@0000:e7:01.0-q4,lcore2@0000:ec:01.0-q5,lcore2@0000:f1:01.0-q6,lcore2@0000:f6:01.0-q7] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 502 packets and 279232 bytes and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Relaunch vhost with iova=pa by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:6a:01.0-q1,lcore2@0000:6f:01.0-q2,lcore2@0000:74:01.0-q3,lcore2@0000:79:01.0-q4,lcore2@0000:e7:01.0-q5,lcore2@0000:ec:01.0-q6,lcore2@0000:f1:01.0-q7,lcore2@0000:f6:01.0-q7] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +11. Rerun step 6. + +Test Case 9: VM2VM vhost-user/virtio-user packed ring vectorized-tx path and multi-queues indirect descriptor with dsa dpdk driver +----------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user +packed ring vectorized-tx path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk driver. +Both iova as VA and PA mode test. + +1. bind 4 dsa device to vfio-pci like common step 1:: + + # ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ + --lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + set verbose 1 + testpmd>start + +4. Attach pdump secondary process to primary process by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send 8k length packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about packed virtqueue vectorized-tx path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. + +7.Relaunch vhost with iova=pa by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + --iova=pa -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ + --lcore-dma=[lcore2@0000:6a:01.0-q1,lcore2@0000:6f:01.0-q2,lcore2@0000:74:01.0-q3,lcore2@0000:79:01.0-q4] + +8. Rerun step 3-6. + +Test Case 10: VM2VM vhost-user/virtio-user split ring non-mergeable path and multi-queues payload check with dsa kernel driver +-------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 1 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset xx + # ./usertools/dpdk-devbind.py -u 6a:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.2,lcore2@wq0.3] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 11: VM2VM vhost-user/virtio-user split ring inorder non-mergeable path and multi-queues payload check with dsa kernel driver +---------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user split ring inorder +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 3 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.3,lcore2@wq2.4,lcore2@wq4.5] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 12: VM2VM vhost-user/virtio-user split ring inorder mergeable path and multi-queues non-indirect descriptor with dsa kernel driver +--------------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and non-indirect descriptor after packets forwarding in vhost-user/virtio-user +split ring inorder mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 4 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the direct descriptors, the 8k length pkt will occupies 5 ring:2000,2000,2000,2000 will need 4 consequent ring, +still need one ring put header. So check 504 packets and 48128 bytes received by virtio-user1 and 502 packets with 64 length and 2 packets with 8K length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@wq0.3,lcore2@wq2.4,lcore2@wq4.3,lcore2@wq6.4] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 13: VM2VM vhost-user/virtio-user split ring mergeable path and multi-queues indirect descriptor with dsa kernel driver +---------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user +split ring mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 4 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=0,mrg_rxbuf=1,in_order=0,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about split virtqueue inorder mergeable path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx --lcore-dma=[lcore2@wq0.3,lcore2@wq2.4,lcore2@wq4.3,lcore2@wq6.4] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 14: VM2VM vhost-user/virtio-user packed ring non-mergeable path and multi-queues payload check with dsa kernel driver +---------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 3 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.4,lcore2@wq2.5,lcore2@wq4.6] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + testpmd>stop + +11. Rerun step 6. + +Test Case 15: VM2VM vhost-user/virtio-user packed ring inorder non-mergeable path and multi-queues payload check with dsa kernel driver +---------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder +non-mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 4 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.0,lcore2@wq4.1,lcore2@wq6.1] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=0,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 566 and RX-bytes is 486016 and 502 packets with 960 length and 64 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.5,lcore2@wq2.6,lcore2@wq4.5,lcore2@wq6.6] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>stop + testpmd>set burst 1 + testpmd>set txpkts 64,128,256,512 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 64 + testpmd>start tx_first 1 + +11. Rerun step 6. + +Test Case 16: VM2VM vhost-user/virtio-user packed ring mergeable path and multi-queues payload check with dsa kernel driver +----------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring +mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 2 dsa device to idxd:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq0.2,lcore2@wq2.3,lcore2@wq2.4] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 \ + --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=0,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 check 502 packets and 279232 bytes and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.6,lcore2@wq0.7,lcore2@wq2.3,lcore2@wq2.4,lcore2@wq2.5] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +11. Rerun step 6. + +Test Case 17: VM2VM vhost-user/virtio-user packed ring inorder mergeable path and multi-queues payload check with dsa kernel driver +------------------------------------------------------------------------------------------------------------------------------------ +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder +mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 8 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore2@wq8.4,lcore2@wq10.5,lcore2@wq12.6,lcore2@wq14.7] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 502 packets and 279232 bytes and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@wq0.7,lcore2@wq2.6,lcore2@wq4.5,lcore2@wq6.4,lcore2@wq8.3,lcore2@wq10.2,lcore2@wq12.1,lcore2@wq14.0] + +9. Rerun step 4. + +10. virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +11. Rerun step 6. + +Test Case 18: VM2VM vhost-user/virtio-user packed ring vectorized-tx path and multi-queues indirect descriptor with dsa kernel driver +------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid and indirect descriptor after packets forwarding in vhost-user/virtio-user +packed ring vectorized-tx path and multi-queues when vhost uses the asynchronous enqueue operations with dsa kernel driver. + +1. bind 4 dsa device to idxd like common step 2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6 + ls /dev/dsa #check wq configure success + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1],dma_ring_size=2048' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 --no-flush-rx \ + --lcore-dma=[lcore11@wq0.0,lcore11@wq2.1,lcore11@wq4.2,lcore11@wq6.3] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 --force-max-simd-bitwidth=512 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=*,rx-dev=./pdump-virtio-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send 8k length packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --force-max-simd-bitwidth=512 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,vectorized=1,queue_size=256 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=256 --rxd=256 + + testpmd>set burst 1 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>start tx_first 7 + testpmd>stop + testpmd>set txpkts 2000,2000,2000,2000 + testpmd>start tx_first 1 + testpmd>stop + +6. Start vhost, then quit pdump and three testpmd, about packed virtqueue vectorized-tx path, it use the indirect descriptors, the 8k length pkt will just occupies one ring. +So check 512 packets and 112128 bytes received by virtio-user1 and 502 packets with 64 length and 10 packets with 8K length in pdump-virtio-rx.pcap. + +Test Case 19: VM2VM vhost-user/virtio-user packed ring inorder mergeable path and multi-queues payload check with dsa dpdk and kernel driver +--------------------------------------------------------------------------------------------------------------------------------------------- +This case uses testpmd to test the payload is valid after packets forwarding in vhost-user/virtio-user packed ring inorder +mergeable path and multi-queues when vhost uses the asynchronous enqueue operations with dsa dpdk and kernel driver. + +1. bind 2 dsa device to vfio-pci and 2 dsa port to idxd like common step 1-2:: + + ls /dev/dsa #check wq configure, reset if exist + # ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 e7:01.0 ec:01.0 + # ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0 + # ./drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2 + ls /dev/dsa #check wq configure success + # ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 + +2. Launch vhost by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:e7:01.0 -a 0000:ec:01.0 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:ec:01.0-q1,lcore2@wq0.0,lcore2@wq2.0] + +3. Launch virtio-user1 by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 7-8 --no-pci --file-prefix=virtio1 \ + --vdev=net_virtio_user1,mac=00:01:02:03:04:05,path=./vhost-net1,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set fwd rxonly + testpmd>start + +4. Attach pdump secondary process to primary process of virtio-user1 by same file-prefix:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio1 -- --pdump 'device_id=net_virtio_user1,queue=0,rx-dev=/tmp/dsa-va-rx.pcap,mbuf-size=8000' + +5. Launch virtio-user0 and send packets:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-pci --file-prefix=virtio \ + --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net0,queues=2,server=1,packed_vq=1,mrg_rxbuf=1,in_order=1,queue_size=4096 \ + -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +6. Start vhost testpmd, quit pdump and check virtio-user1 RX-packets is 502 packets and 279232 bytes and 54 packets with 4640 length and 448 packets with 64 length in pdump-virtio-rx.pcap. + +7. Clear virtio-user1 port stats:: + + testpmd>stop + testpmd>clear port stats all + testpmd>start + +8. Quit and relaunch vhost with diff dsa channel by below command:: + + # ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 \ + --vdev 'eth_vhost0,iface=vhost-net0,queues=2,client=1,dmas=[txq0;txq1]' \ + --vdev 'eth_vhost1,iface=vhost-net1,queues=2,client=1,dmas=[txq0;txq1]' \ + --iova=va -- -i --nb-cores=1 --rxq=2 --txq=2 --txd=4096 --rxd=4096 --no-flush-rx --lcore-dma=[lcore2@0000:e7:01.0-q2,lcore2@0000:e7:01.0-q5,lcore2@0000:ec:01.0-q4,lcore2@wq0.1,lcore2@wq0.3] + +9. Rerun step 4. + +10. Virtio-user0 send packets:: + + testpmd>set burst 1 + testpmd>set txpkts 64,256,2000,64,256,2000 + testpmd>start tx_first 27 + testpmd>stop + testpmd>set burst 32 + testpmd>set txpkts 64 + testpmd>start tx_first 7 + testpmd>stop + +11. Rerun step 6. -- 2.25.1