test suite reviews and discussions
 help / color / mirror / Atom feed
From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V3 2/3] test_plans/vhost_virtio_user_interrupt_cbdma_test_plan: add vhost_virtio_user_interrupt_cbdma testplan
Date: Mon,  9 May 2022 21:39:51 -0400	[thread overview]
Message-ID: <20220510013951.323425-1-weix.ling@intel.com> (raw)

Add new testplan test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 ..._virtio_user_interrupt_cbdma_test_plan.rst | 137 ++++++++++++++++++
 1 file changed, 137 insertions(+)
 create mode 100644 test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst

diff --git a/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst b/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst
new file mode 100644
index 00000000..0488f83f
--- /dev/null
+++ b/test_plans/vhost_virtio_user_interrupt_cbdma_test_plan.rst
@@ -0,0 +1,137 @@
+.. Copyright (c) <2022>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=====================================================
+vhost/virtio-user interrupt mode with cbdma test plan
+=====================================================
+
+Virtio-user interrupt need test with l3fwd-power sample, small packets send from traffic generator
+to virtio side, check virtio-user cores can be wakeup status, and virtio-user cores should be sleep
+status after stop sending packets from traffic generator when CBDMA enabled.This test plan cover 
+vhost-user as the backend.
+
+Test Case1: LSC event between vhost-user and virtio-user with split ring and cbdma enabled
+==========================================================================================
+
+flow: Vhost <--> Virtio
+
+1. Bind 1 CBDMA channel to vfio-pci driver, then start vhost-user side::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3000 -n 4 -a 00:04.0 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0,dmas=[txq0@00:04.0]' -- -i
+    testpmd> set fwd mac
+    testpmd> start
+
+2. Start virtio-user side::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net -- -i --tx-offloads=0x00
+    testpmd> set fwd mac
+    testpmd> start
+
+3. Check the virtio-user side link status::
+
+    testpmd>  show port info 0
+    #it should show "up"
+
+4. Quit the vhost-user side with testpmd, then check the virtio-user side link status::
+
+    testpmd>  show port info 0
+    #it should show "down"
+
+Test Case2: Split ring virtio-user interrupt test with vhost-user as backend and cbdma enabled
+==============================================================================================
+
+flow: TG --> NIC --> Vhost --> Virtio
+
+1. Bind 1 CBDMA channel and 1 NIC port to vfio-pci, launch testpmd with a virtual vhost device as backend::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i  --rxq=1 --txq=1
+    testpmd> start
+
+2. Start l3fwd-power with a virtio-user device::
+
+    ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+    --vdev=virtio_user0,path=./vhost-net -- -p 1 -P --config="(0,0,14)" --parse-ptype
+
+3. Send packets with packet generator, check the virtio-user related core can be wakeup status.
+
+4. Stop sending packets with packet generator, check virtio-user related core change to sleep status.
+
+5. Restart sending packets with packet generator, check virtio-user related core change to wakeup status again.
+
+Test Case3: LSC event between vhost-user and virtio-user with packed ring and cbdma enabled
+===========================================================================================
+
+flow: Vhost <--> Virtio
+
+1. Bind one cbdma port to vfio-pci driver, then start vhost-user side::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3000 -n 4 -a 00:04.0 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0,dmas=[txq0@00:04.0]' -- -i
+    testpmd> set fwd mac
+    testpmd> start
+
+2. Start virtio-user side::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xc000 -n 4 --no-pci --file-prefix=virtio --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1 -- -i --tx-offloads=0x00
+    testpmd> set fwd mac
+    testpmd> start
+
+3. Check the virtio-user side link status::
+
+    testpmd>  show port info 0
+    #it should show "up"
+
+4. Quit the vhost-user side with testpmd, then check the virtio-user side link status::
+
+    testpmd>  show port info 0
+    #it should show "down"
+
+Test Case4: Packed ring virtio-user interrupt test with vhost-user as backend and cbdma enabled
+================================================================================================
+
+flow: TG --> NIC --> Vhost --> Virtio
+
+1. Bind one cbdma port and one NIC port to vfio-pci, launch testpmd with a virtual vhost device as backend::
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 --vdev 'net_vhost0,iface=vhost-net,queues=1,dmas=[txq0@00:04.0]' -- -i  --rxq=1 --txq=1
+    testpmd> start
+
+2. Start l3fwd-power with a virtio-user device::
+
+    ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xc000 -n 4 --log-level='user1,7' --no-pci --file-prefix=l3fwd-pwd \
+    --vdev=virtio_user0,path=./vhost-net,packed_vq=1 -- -p 1 -P --config="(0,0,14)" --parse-ptype
+
+3. Send packets with packet generator, check the virtio-user related core can be wakeup status.
+
+4. Stop sending packets with packet generator, check virtio-user related core change to sleep status.
+
+5. Restart sending packets with packet generator, check virtio-user related core change to wakeup status again.
+
-- 
2.25.1


                 reply	other threads:[~2022-05-10  1:40 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220510013951.323425-1-weix.ling@intel.com \
    --to=weix.ling@intel.com \
    --cc=dts@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).