According to dpdk commit 3c4426db54fc(app/testpmd: do not poll stopped queues) modify the plan to adapt to this change. Signed-off-by: Lingli Chen --- test_plans/dynamic_queue_test_plan.rst | 4 ++-- test_plans/queue_start_stop_test_plan.rst | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/test_plans/dynamic_queue_test_plan.rst b/test_plans/dynamic_queue_test_plan.rst index 96cfcb8a..d22068a0 100644 --- a/test_plans/dynamic_queue_test_plan.rst +++ b/test_plans/dynamic_queue_test_plan.rst @@ -94,7 +94,7 @@ Stop one Tx queue on port 0:: Set txonly forward, start testpmd -Start testpmd, then stop, check this stopped queue only transmits 255 packets +Start testpmd, then stop, check this stopped queue not display Setup this stopped queue on the port:: @@ -162,7 +162,7 @@ Stop one Tx queue on port 0:: Set txonly forward, start testpmd -Start testpmd, then stop, check this stopped queue only transmits 255 packets +Start testpmd, then stop, check this stopped queue not display Reconfigure ring size as 512 for the stopped queues on port 0:: diff --git a/test_plans/queue_start_stop_test_plan.rst b/test_plans/queue_start_stop_test_plan.rst index cf660710..e895076d 100644 --- a/test_plans/queue_start_stop_test_plan.rst +++ b/test_plans/queue_start_stop_test_plan.rst @@ -43,7 +43,7 @@ This case support PF (Intel® Ethernet 700 Series), VF (Intel® Ethernet 700 Ser #. Start packet generator to transmit and not receive packets #. Run "port 0 rxq 0 start" to start rxq 0 in port 0 #. Run "port 1 txq 1 stop" to start txq 0 in port 1 -#. Start packet generator to transmit and not receive packets but in testpmd it is a "ports 0 queue 0 received 1 packages" print +#. Start packet generator to transmit and not receive packets #. Run "port 1 txq 1 start" to start txq 0 in port 1 #. Start packet generator to transmit and receive packets #. Test it again with VF -- 2.17.1