* [dts][PATCH V3 1/3] test_plans/basic_4k_pages_cbdma_test_plan: modify testplan to test virtio dequeue
@ 2022-08-17 2:00 Wei Ling
0 siblings, 0 replies; only message in thread
From: Wei Ling @ 2022-08-17 2:00 UTC (permalink / raw)
To: dts; +Cc: Wei Ling
From DPDK-22.07, virtio support async dequeue for split and packed ring
path, so modify basic_4k_pages_cbdma testplan to test the split
and packed ring async dequeue feature.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
test_plans/basic_4k_pages_cbdma_test_plan.rst | 624 ++++++++++++------
1 file changed, 426 insertions(+), 198 deletions(-)
diff --git a/test_plans/basic_4k_pages_cbdma_test_plan.rst b/test_plans/basic_4k_pages_cbdma_test_plan.rst
index 5bbd19b4..e5763998 100644
--- a/test_plans/basic_4k_pages_cbdma_test_plan.rst
+++ b/test_plans/basic_4k_pages_cbdma_test_plan.rst
@@ -5,27 +5,26 @@
Basic test with CBDMA in 4K-pages test plan
===========================================
-DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed memory
+DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed memory
(on systems that support memfd), to allow using virtio-user-based NICs without hugepages.
Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
-In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
-channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported
-in both split and packed ring.
+In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
+channels and one DMA channel can be shared by multiple vrings at the same time. From DPDK22.07, Vhost enqueue and dequeue operation with
+CBDMA channels is supported in both split and packed ring.
This document provides the test plan for testing some basic functions with CBDMA device in 4K-pages memory environment.
1. Test split and packed ring virtio path in the PVP topology environmet.
2. Check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring
vhost-user/virtio-net mergeable path.
-3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring and packed ring
+3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring and packed ring
vhost-user/virtio-net mergeable path.
-4. Vhost-user using 1G hugepges and virtio-user using 4k-pages.
-.. note:
+Note:
- 1. When CBDMA channels are bound to vfio driver, VA mode is the default and recommended.
- For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
- 2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd. And case 4-5 have not yet been automated.
+1. When CBDMA channels are bound to vfio driver, VA mode is the default and recommended.
+For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
+2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd. And case 4-5 have not yet been automated.
For more about dpdk-testpmd sample, please refer to the DPDK docments:
https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html
@@ -45,10 +44,10 @@ General set up
2. Compile DPDK::
- # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
# ninja -C <dpdk build dir> -j 110
For example:
- CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
+ CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
ninja -C x86_64-native-linuxapp-gcc -j 110
3. Get the PCI device ID and DMA device ID of DUT, for example, 0000:18:00.0 is PCI device ID, 0000:00:04.0, 0000:00:04.1 is DMA device ID::
@@ -84,213 +83,284 @@ Common steps
For example, bind 1 NIC port and 1 CBDMA channels:
<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:af:00.0,0000:80:04.0
-Test Case 1: Basic test vhost/virtio-user split ring with 4K-pages and cbdma enable
------------------------------------------------------------------------------------
-This case uses testpmd Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous enqueue operations with CBDMA channels
-in 4k-pages environment. And the mapping between vrings and dsa virtual channels is 1:1.
+Test Case 1: Basic test vhost-user/virtio-user split ring vhost async operation using 4K-pages and cbdma enable
+---------------------------------------------------------------------------------------------------------------
+This case tests basic functions of split ring virtio path when uses the asynchronous operations with CBDMA channels in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
-1. Bind 1 NIC port and 1 CBDMA channel to vfio-pci, as common steps 1.
+1. Bind one port to vfio-pci, launch vhost::
-2. Launch vhost by below command::
+ ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:18:00.0 -a 0000:00:04.0 \
+ --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0;rxq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:00:04.0]
+ testpmd>start
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 31-32 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:af:00.0 -a 0000:80:04.0 \
- --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=1 --lcore-dma=[lcore32@0000:80:04.0]
- testpmd> start
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan
+ mount tmpfs /mnt/tmpfs_yinan -t tmpfs -o size=4G
3. Launch virtio-user with 4K-pages::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 33-34 -n 4 --no-huge -m 1024 --file-prefix=virtio-user --no-pci \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,queues=1 -- -i
- testpmd> set fwd mac
- testpmd> start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
+ testpmd>start
4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
- testpmd> show port stats all
+ testpmd>show port stats all
+
+Test Case 2: Basic test vhost-user/virtio-user packed ring vhost async operation using 4K-pages and cbdma enable
+----------------------------------------------------------------------------------------------------------------
+This case tests basic functions of packed ring virtio path when uses the asynchronous operations with CBDMA channels in 4K-pages memory environment and PVP vhost-user/virtio-user topology.
-Test Case 2: Basic test vhost/virtio-user packed ring with 4K-pages and cbdma enable
-------------------------------------------------------------------------------------
-This case uses testpmd Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous enqueue operations with CBDMA channels
-in 4k-pages environment. And the mapping between vrings and dsa virtual channels is 1:1.
+1. Bind one port to vfio-pci, launch vhost::
-1. Bind 1 NIC port and 1 CBDMA channel to vfio-pci, as common steps 1.
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:18:00.0 -a 0000:00:04.0 \
+ --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0;rxq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:00:04.0]
+ testpmd>start
-2. Launch vhost by below command::
+2. Prepare tmpfs with 4K-pages::
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:af:00.0 0000:80:04.0
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 31-32 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:af:00.0 -a 0000:80:04.0 \
- --vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=1 --lcore-dma=[lcore32@0000:80:04.0]
- testpmd> start
+ mkdir /mnt/tmpfs_yinan
+ mount tmpfs /mnt/tmpfs_yinan -t tmpfs -o size=4G
3. Launch virtio-user with 4K-pages::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 33-34 -n 4 --no-huge -m 1024 --file-prefix=virtio-user --no-pci \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
- testpmd> set fwd mac
- testpmd> start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+ --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
+ testpmd>start
4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
- testpmd> show port stats all
+ testpmd>show port stats all
+
+Test Case 3: VM2VM vhost-user/virtio-net split ring vhost async operation test with tcp traffic using 4K-pages and cbdma enable
+-------------------------------------------------------------------------------------------------------------------------------
+This case test the function of Vhost TSO in the topology of vhost-user/virtio-net split ring mergeable path by verifing the TSO/cksum in the TCP/IP stack
+when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
-Test Case 3: VM2VM split ring vhost-user/virtio-net 4K-pages and CBDMA enable test with tcp traffic
----------------------------------------------------------------------------------------------------
-This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path
-by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with CBDMA channels
-in 4k-pages environment.
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
-1. Bind 2 CBDMA channels to vfio-pci, as common steps 1.
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0],dma_ring_size=2048' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:00:04.0,lcore4@0000:00:04.1]
+ testpmd>start
-2. Launch vhost by below command::
+2. Prepare tmpfs with 4K-pages::
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30-32 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:80:04.0 -a 0000:80:04.1 \
- --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \
- --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore31@0000:80:04.0,lcore32@0000:80:04.1]
- testpmd> start
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
3. Launch VM1 and VM2::
- taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
- -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
-
- taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
4. On VM1, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
5. On VM2, set virtio device IP and run arp protocal::
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
6. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
7. Check 2VMs can receive and send big packets to each other::
- testpmd> show port xstats all
- Port 0 should have tx packets above 1522
- Port 1 should have rx packets above 1522
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
-Test Case 4: vm2vm vhost/virtio-net split ring multi queues with 4K-pages and cbdma enable
--------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
-vm2vm vhost-user/virtio-net split ring mergeable path when vhost uses the asynchronous enqueue operations with CBDMA channel.
-The dynamic change of multi-queues number also test.
+Test Case 4: VM2VM vhost-user/virtio-net packed ring vhost async operation test with tcp traffic using 4K-pages and cbdma enable
+--------------------------------------------------------------------------------------------------------------------------------
+This case test the function of Vhost TSO in the topology of vhost-user/virtio-net packed ring mergeable path by verifing the TSO/cksum in the TCP/IP stack
+when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+
+1. Bind 2 CBDMA channels to vfio-pci, then launch vhost by below command::
+
+ rm -rf vhost-net*
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,tso=1,dmas=[txq0;rxq0],dma_ring_size=2048' \
+ --vdev 'net_vhost1,iface=vhost-net1,queues=1,tso=1,dmas=[txq0;rxq0],dma_ring_size=2048' \
+ --iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --lcore-dma=[lcore3@0000:00:04.0,lcore4@0000:00:04.1]
+ testpmd>start
+
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
+
+3. Launch VM1 and VM2::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+ taskset -c 33 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1 \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
-1. Bind 16 CBDMA channels to vfio-pci, as common steps 1.
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
-2. Launch vhost by below command::
+5. On VM2, set virtio device IP and run arp protocal::
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
- 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 --no-huge -m 1024 --file-prefix=vhost \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore30@0000:00:04.4,lcore30@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore32@0000:80:04.4,lcore32@0000:80:04.5,lcore32@0000:80:04.6,lcore33@0000:80:04.7]
+6. Check the iperf performance between two VMs by below commands::
- testpmd> start
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+7. Check 2VMs can receive and send big packets to each other::
+
+ testpmd>show port xstats all
+ Port 0 should have tx packets above 1522
+ Port 1 should have rx packets above 1522
+
+Test Case 5: vm2vm vhost/virtio-net split ring multi queues using 4K-pages and cbdma enable
+-------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
+split ring mergeable path when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment. The dynamic change of multi-queues number is also tested.
+1. Bind one port to vfio-pci, launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore2@0000:00:04.4,lcore2@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
+ testpmd>start
+
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
3. Launch VM qemu::
- taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
- -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
- -chardev socket,id=char0,path=./vhost-net0,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
-
- taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
- -chardev socket,id=char0,path=./vhost-net1,server \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
4. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
5. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
6. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
7. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
8. Quit and relaunch vhost w/ diff CBDMA channels::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 --no-huge -m 1024 --file-prefix=vhost \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:80:04.0,lcore31@0000:00:04.2,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.1,lcore32@0000:00:04.3,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore32@0000:80:04.4,lcore32@0000:80:04.5,lcore32@0000:80:04.6,lcore33@0000:80:04.7]
- testpmd> start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.0,lcore3@0000:00:04.2,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:00:04.1,lcore4@0000:00:04.3,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
+ testpmd>start
9. Rerun step 6-7.
10. Quit and relaunch vhost w/o CBDMA channels::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
-- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
- testpmd> start
+ testpmd>start
11. On VM1, set virtio device::
- ethtool -L ens5 combined 4
+ ethtool -L ens5 combined 4
12. On VM2, set virtio device::
- ethtool -L ens5 combined 4
+ ethtool -L ens5 combined 4
13. Scp 1MB file form VM1 to VM2::
@@ -303,91 +373,249 @@ The dynamic change of multi-queues number also test.
15. Quit and relaunch vhost with 1 queues::
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 --no-huge -m 1024 --file-prefix=vhost \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
- testpmd> start
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=4' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=4' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1
+ testpmd>start
16. On VM1, set virtio device::
- ethtool -L ens5 combined 1
+ ethtool -L ens5 combined 1
17. On VM2, set virtio device::
- ethtool -L ens5 combined 1
+ ethtool -L ens5 combined 1
18. Scp 1MB file form VM1 to VM2M, check packets can be forwarding success by scp::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
19. Check the iperf performance, ensure queue0 can work from vhost side::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+Test Case 6: vm2vm vhost/virtio-net packed ring multi queues using 4K-pages and cbdma enable
+--------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
+packed ring mergeable path when vhost uses the asynchronous operations with CBDMA channels in 4K-pages memory environment.
+
+1. Bind one port to vfio-pci, launch vhost::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore2@0000:00:04.4,lcore2@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
+ testpmd>start
+
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
+
+3. Launch VM qemu::
+
+ taskset -c 32 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+ taskset -c 40 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
-Test Case 5: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and cbdma enable
+5. On VM2, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+7. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+Test Case 7: vm2vm vhost/virtio-net split ring multi queues using 1G/4k-pages and cbdma enable
+----------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
+split ring mergeable path when vhost uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory environment and the front-end is in 4k-pages memory environment.
+
+1. Bind 16 CBDMA channel to vfio-pci, launch vhost::
+
+ ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
+ 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore33@0000:80:04.4,lcore33@0000:80:04.5,lcore33@0000:80:04.6,lcore33@0000:80:04.7]
+ testpmd>start
+
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
+
+3. Launch VM qemu::
+
+ taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+
+7. Check the iperf performance between two VMs by below commands::
+
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+8. Quit and relaunch vhost w/ diff CBDMA channels::
+
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.0,lcore3@0000:00:04.2,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:00:04.1,lcore4@0000:00:04.3,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore4@0000:80:04.4,lcore4@0000:80:04.5,lcore4@0000:80:04.6,lcore5@0000:80:04.7]
+ testpmd>start
+
+9. Rerun step 6-7.
+
+Test Case 8: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and cbdma enable
----------------------------------------------------------------------------------------------------
-This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
-vm2vm vhost-user/virtio-net multi-queues mergeable path when vhost uses the asynchronous enqueue operations with CBDMA
-channels. And one virtio-net is split ring, the other is packed ring. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in vm2vm vhost-user/virtio-net
+split and packed ring mergeable path when vhost uses the asynchronous operations with CBDMA channels,the back-end is in 1G-pages memory environment and the front-end is in 4k-pages memory environment.
-1. Bind 16 CBDMA channel to vfio-pci, as common steps 1.
+1. Bind 16 CBDMA channel to vfio-pci, launch vhost::
-2. Launch vhost by below command::
+ ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
+ 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
- ./usertools/dpdk-devbind.py --bind=vfio-pci 0000:80:04.0 0000:80:04.1 0000:80:04.2 0000:80:04.3 0000:80:04.4 0000:80:04.5 0000:80:04.6 0000:80:04.7 \
- 0000:00:04.0 0000:00:04.1 0000:00:04.2 0000:00:04.3 0000:00:04.4 0000:00:04.5 0000:00:04.6 0000:00:04.7
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
+ --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+ --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore33@0000:80:04.4,lcore33@0000:80:04.5,lcore33@0000:80:04.6,lcore33@0000:80:04.7]
+ testpmd>start
- <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 29-33 -n 4 -m 1024 --file-prefix=vhost \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;]' \
- --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;]' \
- --iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore30@0000:80:04.0,lcore30@0000:80:04.1,lcore30@0000:00:04.2,lcore30@0000:00:04.3,lcore31@0000:00:04.4,lcore31@0000:00:04.5,lcore31@0000:00:04.6,lcore31@0000:00:04.7,lcore32@0000:80:04.0,lcore32@0000:80:04.1,lcore32@0000:80:04.2,lcore32@0000:80:04.3,lcore33@0000:80:04.4,lcore33@0000:80:04.5,lcore33@0000:80:04.6,lcore33@0000:80:04.7]
- testpmd> start
+2. Prepare tmpfs with 4K-pages::
+
+ mkdir /mnt/tmpfs_yinan0
+ mkdir /mnt/tmpfs_yinan1
+ mount tmpfs /mnt/tmpfs_yinan0 -t tmpfs -o size=4G
+ mount tmpfs /mnt/tmpfs_yinan1 -t tmpfs -o size=4G
3. Launch VM qemu::
- taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge0,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
- -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
- -chardev socket,id=char0,path=./vhost-net0 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
-
- taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_nohuge1,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
- -chardev socket,id=char0,path=./vhost-net1 \
- -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,packed=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+ taskset -c 20,21,22,23,24,25,26,27 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan0,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6000-:22 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+ taskset -c 48,49,50,51,52,53,54,55 /home/QEMU/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+ -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_yinan1,share=on \
+ -numa node,memdev=mem -mem-prealloc -drive file=/home/image/ubuntu2004_2.img \
+ -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+ -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.251.220:6001-:22 \
+ -chardev socket,id=char0,path=./vhost-net1,server \
+ -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
4. On VM1, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.2
- arp -s 1.1.1.8 52:54:00:00:00:02
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.2
+ arp -s 1.1.1.8 52:54:00:00:00:02
5. On VM2, set virtio device IP and run arp protocal::
- ethtool -L ens5 combined 8
- ifconfig ens5 1.1.1.8
- arp -s 1.1.1.2 52:54:00:00:00:01
+ ethtool -L ens5 combined 8
+ ifconfig ens5 1.1.1.8
+ arp -s 1.1.1.2 52:54:00:00:00:01
6. Scp 1MB file form VM1 to VM2::
- Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
+ Under VM1, run: `scp [xxx] root@1.1.1.8:/` [xxx] is the file name
7. Check the iperf performance between two VMs by below commands::
- Under VM1, run: `iperf -s -i 1`
- Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+ Under VM1, run: `iperf -s -i 1`
+ Under VM2, run: `iperf -c 1.1.1.2 -i 1 -t 60`
+
+8. Relaunch VM1, and rerun step 4.
+
+9. Rerun step 6-7.
--
2.25.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-08-17 2:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-08-17 2:00 [dts][PATCH V3 1/3] test_plans/basic_4k_pages_cbdma_test_plan: modify testplan to test virtio dequeue Wei Ling
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).