* [dts][PATCH V2 2/3] test_plans/ice_enable_basic_hqos_on_pf:add new testplan
2022-09-01 17:12 [dts][PATCH V2 1/3] test_plans/index:add new testplan index Zhimin Huang
@ 2022-09-01 17:12 ` Zhimin Huang
2022-09-01 17:12 ` [dts][PATCH V2 3/3] tests/ice_enable_basic_hqos_on_pf:add new test suite Zhimin Huang
1 sibling, 0 replies; 3+ messages in thread
From: Zhimin Huang @ 2022-09-01 17:12 UTC (permalink / raw)
To: dts; +Cc: Zhimin Huang
add 22.07 new feature testplan
Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
.../ice_enable_basic_hqos_on_pf_test_plan.rst | 546 ++++++++++++++++++
1 file changed, 546 insertions(+)
create mode 100644 test_plans/ice_enable_basic_hqos_on_pf_test_plan.rst
diff --git a/test_plans/ice_enable_basic_hqos_on_pf_test_plan.rst b/test_plans/ice_enable_basic_hqos_on_pf_test_plan.rst
new file mode 100644
index 00000000..d785fb2b
--- /dev/null
+++ b/test_plans/ice_enable_basic_hqos_on_pf_test_plan.rst
@@ -0,0 +1,546 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2022 Intel Corporation
+
+==================================
+ICE Enable basic HQoS on PF driver
+==================================
+
+Description
+===========
+A switch chip help to fan out network ports because of Intel NIC didn't have so much ports.
+In this solution, NIC might be configured to 4x10G or 4x25G or 100G mode, all these connect to a switch chip.
+Outside switch port's bandwidth lower than NIC, might be 1G and 10G. Therefore, NIC should limit flow bandwidth to each switch port.
+To support this opportunity, we need 3 level tx scheduler:
+
+ - queue (each CPU core have 1 queue for outside switch port)
+ - queue group (map to outside switch port)
+ - port (local MAC port)
+
+The PMD is required to support the below features:
+
+ - Support at least 3 layers Tx scheduler, (Port--> Queue --> Queue Group)
+ - Support SP or RR Scheduling on queue groups
+ - Support SP or RR Scheduling or WFQ Scheduling on queues
+ - Support Bandwith configure on each layer.
+
+..Note::
+
+ Node priority 0 is highest priority, 7 is lowest priority.
+ SP: Strict Priority arbitration scheme.
+ RR: Round Robin arbitration scheme.
+ WFQ: Weighted Fair Queue arbitration scheme.
+
+Prerequisites
+=============
+
+Topology
+--------
+one port from ICE_100G-E810C_QSFP(NIC-1), two ports from ICE_25G-E810_XXV_SFP(NIC-2);
+
+one 100G cable, one 10G cable;
+
+The connection is as below table::
+
+ +---------------------------------+
+ | DUT | IXIA |
+ +=================================+
+ | 100G |
+ | NIC-1,Port-1 --- IXIA, Port-1 |
+ | 10G |
+ | NIC-2,Port-1 --- NIC-2,Port-2 |
+ +---------------------------------+
+
+Hardware
+--------
+1. one NIC ICE_100G-E810C_QSFP(NIC-1), one NIC ICE_25G-E810_XXV_SFP(NIC-2);
+ one 100G cable, one 10G cable;
+ Assume that device ID and pci address of NIC-1,Port-1 are ens785f0 and 18:00.0,
+ device ID and pci address of NIC-2,Port-1 are ens802f0 and 86:00.0.
+2. one 100Gbps traffic generator, assume that as an IXIA port to design case.
+
+Software
+--------
+dpdk: http://dpdk.org/git/dpdk
+
+runtime command: https://doc.dpdk.org/guides/testpmd_app_ug/testpmd_funcs.html
+
+General Set Up
+--------------
+1. Copy specific ice package to /lib/firmware/updates/intel/ice/ddp/ice.pkg,
+ then load driver::
+
+ # cp <ice package> /lib/firmware/updates/intel/ice/ddp/ice.pkg
+ # rmmod ice
+ # insmod <ice build dir>/ice.ko
+
+2. Compile DPDK::
+
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib --default-library=static <dpdk build dir>
+ # ninja -C <dpdk build dir> -j 110
+
+3. Get the pci device id and interface of DUT and tester.
+ For example, device ID and pci address of NIC-1,Port-1 are ens785f0 and 18:00.0,
+ device ID and pci address of NIC-2,Port-1 are ens802f0 and 86:00.0.
+ Bind the DUT port to dpdk::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 18:00.1 86:00.0
+
+4. launch testpmd with 8 or 16 queues due to case design::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=16 --txq=16
+
+Test Case
+=========
+Common Steps
+------------
+IXIA Sends 8 streams(1-8) with different pkt size(64/128/256/512/1024/1518/512/1024).
+Stream2 has UP1, stream3 has UP2, other streams has UP0.
+Linerate is 100Gbps, each stream occupied 12.5%Max linerate.
+The 10Gbps cable limited TX rate of NIC-2,Port-1 to 10Gbps.
+Check the actual TX throughput of ens802f0(86:00.0) is about 8.25Gbps.
+When check the throughput ratio of each queue group and queue,
+stop the forward, and check the TX-packets ratio of queues.
+The TX-packets ratio of queues is same as TX throughput ratio of queues.
+
+Test Case 1: queuegroup_RR_queue_WFQ_RR_nolimit
+-----------------------------------------------
+RR Scheduling on queue groups.
+WFQ Scheduling on queue group 0, RR Scheduling on queue group 1.
+No bandwidth limit.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 8 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=8 --txq=8
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7).
+ RR scheduler algo between group 0 and group 1.
+ WFQ scheduler within group 0(1:2:3:4) and RR within group 1::
+
+ testpmd> add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ The TX throughput of Queue group 0 and group 1 are the same.
+ The TX throughput of queue 0-3 is 1:2:3:4
+ The TX throughput of queue 4-7 is 1:1:1:1.
+
+Test Case 2: queuegroup_SP_queue_WFQ_RR_nolimit
+-----------------------------------------------
+SP Scheduling on queue groups.
+WFQ Scheduling on queue group 0, RR Scheduling on queue group 1.
+No bandwidth limit.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 8 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=8 --txq=8
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7).
+ SP scheduler algo between group 0 and group 1(0/1).
+ WFQ scheduler within group 0(1:2:3:4) and RR within group 1::
+
+ testpmd> testpmd> add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0
+ testpmd> testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> testpmd> add port tm nonleaf node 1 600000 800000 1 1 3 -1 1 0 0
+ testpmd> testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> testpmd> add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Queue group 1 has not TX throughput
+ The TX throughput of queue 0-3 is 1:2:3:4
+
+Test Case 3: queuegroup_RR_queue_WFQ_RR
+---------------------------------------
+RR Scheduling on queue groups.
+WFQ Scheduling on queue group 0, RR Scheduling on queue group 1.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 8 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=8 --txq=8
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7).
+ RR scheduler algo between group 0 and group 1.
+ WFQ scheduler within group 0(1:2:3:4) and RR within group 1.
+ Set rate limit on group 1 to 300MBps::
+
+ testpmd> add port tm node shaper profile 1 1 300000000 0 300000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 0 1 3 1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Check the TX throughput of queue group 1 is limited to 2.4Gbps.
+ The TX throughput of queue 0-3 is 1:2:3:4.
+ The TX throughput of queue 4-7 is 1:1:1:1.
+
+Test Case 4: queuegroup_SP_queue_WFQ_SP
+---------------------------------------
+SP Scheduling on queue groups.
+WFQ Scheduling on queue group 0, SP Scheduling on queue group 1.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 12 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=12 --txq=12
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 11).
+ SP scheduler algo between group 0 and group 1(0/1).
+ WFQ scheduler within group 0(1:2:3:4) and SP within group 1(0/2/1/2/3/3/5/7).
+ Set rate limit on group 0 to 300MBps,
+ set rate limit on group 1 to (10/10/100/20/300/400/no/10MBps)::
+
+ testpmd> add port tm node shaper profile 1 1 300 0 300000000 0 0 0
+ testpmd> add port tm node shaper profile 1 2 300 0 100000000 0 0 0
+ testpmd> add port tm node shaper profile 1 3 300 0 10000000 0 0 0
+ testpmd> add port tm node shaper profile 1 4 300 0 20000000 0 0 0
+ testpmd> add port tm node shaper profile 1 5 200 0 400000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 7 1 3 -1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 3 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 2 1 4 3 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 1 1 4 2 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 2 1 4 4 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 8 600000 3 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 9 600000 3 1 4 5 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 10 600000 5 1 4 3 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 11 600000 7 1 4 3 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Check the TX throughput of queue group 0 is limited to 2.4Gbps.
+ The TX throughput of queue 0-3 is 1:2:3:4.
+ The throughput of queue 4 is limited to 80Mbps,
+ queue 5 is limited to 80Mbps,
+ queue 6 is limited to 800Mbps,
+ queue 7 is limited to 160Mbps,
+ queue 8 and queue 9 has rest throughput of queue group 1,
+ and the two queue has the same throughput,
+ queue 10 and queue 11 has little throughput.
+
+Test Case 5: queuegroup_RR_queue_RR_SP_WFQ
+------------------------------------------
+RR Scheduling on queue groups.
+RR Scheduling on queue group 0, SP Scheduling on queue group 1,
+WFQ Scheduling on queue group 2.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 16 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=16 --txq=16
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7),group 2(queue 8 to queue 15).
+ RR scheduler algo between group 0, group 1 and group 2.
+ RR scheduler within group 0(1:1:1:1), SP within group 1(0/4/1/7) and WFQ within group 2(4:2:2:100:3:1:5:7).
+ Set rate limit on queue4-7 to (100/no/400/100MBps)::
+
+ testpmd> add port tm node shaper profile 1 1 300 0 300000000 0 0 0
+ testpmd> add port tm node shaper profile 1 2 100 0 100000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 500000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 2 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 4 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 1 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 7 1 4 2 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 8 500000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 9 500000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 10 500000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 11 500000 0 100 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 12 500000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 13 500000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 14 500000 0 5 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 15 500000 0 7 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Check the TX throughput ratio of queue group 0/1/2 is 1:1:1.
+ The TX throughput of queue 0-3 is 1:1:1:1.
+ The throughput of queue 4 is limited to 800Mbps,
+ queue 5 has little throughput,
+ queue 6 has the rest throughput of queue group 1,
+ queue 7 has little throughput.
+ Queue 8-15 throughput ratio is align to (4:2:2:100:3:1:5:7).
+
+Test Case 6: queuegroup_SP_queue_RR_SP_WFQ
+------------------------------------------
+SP Scheduling on queue groups.
+RR Scheduling on queue group 0, SP Scheduling on queue group 1,
+WFQ Scheduling on queue group 2.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 16 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=16 --txq=16
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7),group 2(queue 8 to queue 15).
+ SP scheduler algo between group 0, group 1 and group 2(0/1/2).
+ RR scheduler within group 0(1:1:1:1), SP within group 1(0/4/1/7) and WFQ within group 2(4:2:2:100:3:1:5:7).
+ Set rate limit on group 0 to 100MBps, set rate limit on group 1 to 100MBps,
+ set rate limit on group 2 to 300MBps.
+ Set rate limit to queue0, queue1 and queue4 to 300MBps,
+ set no rate limit on other queues::
+
+ testpmd> add port tm node shaper profile 1 1 300 0 300000000 0 0 0
+ testpmd> add port tm node shaper profile 1 2 100 0 100000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 2 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 1 1 3 2 1 0 0
+ testpmd> add port tm nonleaf node 1 500000 800000 2 1 3 1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 4 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 1 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 7 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 8 500000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 9 500000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 10 500000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 11 500000 0 100 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 12 500000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 13 500000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 14 500000 0 5 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 15 500000 0 7 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Check the TX throughput ratio of queue group 0/1/2 is 1:1:3,
+ the sum of TX throughput is 4Gbps.
+ The TX throughput ratio of queue 0-3 is 1:1:1:1.
+ The throughput of queue 4 is limited to 800Mbps,
+ queue 5-7 has little throughput,
+ Queue 8-15 throughput ratio is align to (4:2:2:100:3:1:5:7).
+
+Test Case 7: queuegroup_RR_queue_WFQ_WFQ
+----------------------------------------
+RR Scheduling on queue groups.
+WFQ Scheduling on queue group 0, WFQ Scheduling on queue group 1.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 8 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=8 --txq=8
+
+2. configure 2 groups: group 0(queue 0 to queue 3),group 1(queue 4 to queue 7).
+ RR scheduler algo between group 0 and group 1.
+ WFQ scheduler within group 0(1:2:3:4), WFQ within group 1(1:2:3:4).
+ Set bandwidth limit on queues of group 1 to (10/10/40/no)MBps
+ Set bandwidth limit on queues of group 1 to (40/30/no/no)MBps::
+
+ testpmd> add port tm node shaper profile 1 1 10000000 0 10000000 0 0 0
+ testpmd> add port tm node shaper profile 1 2 20000000 0 20000000 0 0 0
+ testpmd> add port tm node shaper profile 1 3 30000000 0 30000000 0 0 0
+ testpmd> add port tm node shaper profile 1 4 40000000 0 40000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 2 4 1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 3 4 4 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 4 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 0 2 4 3 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 0 4 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ testpmd> start
+
+3. Send streams from IXIA
+
+4. Check the TX throughput of port 1::
+
+ testpmd> show port stats 1
+
+ Check the throughput ratio of each queue group and queue::
+
+ testpmd> stop
+
+ Check the TX throughput of queue group 0 and group 1 are the same.
+ Check the TX throughput of queue0 is limited to 10MBps,
+ queue1 is limited to 10MBps, queue2 is limited to 40MBps,
+ queue3 has the rest throughput of queue group 0.
+ Queue4 is limited to 40MBps, queue5 is limited to 30MBps,
+ queue 6 and queue 7 have the rest throughput of queue group 1,
+ the throughput ratio of queue 6 and queue 7 is 3:4.
+
+Test Case 8: negative case
+--------------------------
+Configure invalid parameters, report expected errors.
+
+Test Steps
+~~~~~~~~~~
+1. Launch testpmd with 16 queues::
+
+ <dpdk dir># ./<dpdk build dir>/app/dpdk-testpmd -c 0x3fffe -n 4 -- -i --rxq=16 --txq=16
+
+2. configure 2 groups, WFQ scheduler algo between group 0 and group 1(1:2)::
+
+ testpmd> add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0
+ testpmd> add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0
+ testpmd> add port tm nonleaf node 1 600000 800000 0 2 3 -1 1 0 0
+ ice_tm_node_add(): weight != 1 not supported in level 3
+
+3. Configure RR scheduler algo on groups, and set queue 3 weight to 201::
+
+ testpmd> port stop 1
+ testpmd> del port tm node 1 600000
+ testpmd> add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0
+ testpmd> port start 1
+ testpmd> add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 3 700000 0 201 4 -1 0 0xffffffff 0 0
+ node weight: weight must be between 1 and 200 (error 21)
+
+4. reset queue 3 weight to 200, set queue 11 node priority to 8::
+
+ testpmd> add port tm leaf node 1 3 700000 0 200 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 8 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 9 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 10 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 11 600000 8 1 4 -1 0 0xffffffff 0 0
+ node priority: priority should be less than 8 (error 20)
+
+5. reset queue 11 node priority to 7,
+ set queue 4-15 (>8 queues) to queue group 1 and commit::
+
+ testpmd> add port tm leaf node 1 11 600000 7 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 12 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 13 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 14 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> add port tm leaf node 1 15 600000 0 1 4 -1 0 0xffffffff 0 0
+ testpmd> port tm hierarchy commit 1 no
+ ice_move_recfg_lan_txq(): move lan queue 12 failed
+ ice_hierarchy_commit(): move queue 12 failed
+ cause unspecified: (no stated reason) (error 1)
+
+6. Check all the reported errors as expected.
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread
* [dts][PATCH V2 3/3] tests/ice_enable_basic_hqos_on_pf:add new test suite
2022-09-01 17:12 [dts][PATCH V2 1/3] test_plans/index:add new testplan index Zhimin Huang
2022-09-01 17:12 ` [dts][PATCH V2 2/3] test_plans/ice_enable_basic_hqos_on_pf:add new testplan Zhimin Huang
@ 2022-09-01 17:12 ` Zhimin Huang
1 sibling, 0 replies; 3+ messages in thread
From: Zhimin Huang @ 2022-09-01 17:12 UTC (permalink / raw)
To: dts; +Cc: Zhimin Huang
add 22.07 new feature test suite
Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
.../TestSuite_ice_enable_basic_hqos_on_pf.py | 652 ++++++++++++++++++
1 file changed, 652 insertions(+)
create mode 100644 tests/TestSuite_ice_enable_basic_hqos_on_pf.py
diff --git a/tests/TestSuite_ice_enable_basic_hqos_on_pf.py b/tests/TestSuite_ice_enable_basic_hqos_on_pf.py
new file mode 100644
index 00000000..a35f06fb
--- /dev/null
+++ b/tests/TestSuite_ice_enable_basic_hqos_on_pf.py
@@ -0,0 +1,652 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2022 Intel Corporation
+#
+"""
+DPDK Test suite.
+ICE Enable basic HQoS on PF driver.
+"""
+
+import re
+from copy import deepcopy
+from pprint import pformat
+
+from framework.packet import Packet
+from framework.pktgen import TRANSMIT_CONT
+from framework.pmd_output import PmdOutput
+from framework.settings import HEADER_SIZE, get_nic_name
+from framework.test_case import TestCase
+
+PKT_LEN = [64, 128, 256, 512, 1024, 1518, 512, 1024]
+STREAM_UP_CONFIG = [0, 1, 2, 0, 0, 0, 0, 0]
+LINERATE = 100
+
+
+class TestIceEnableBasicHqosOnPF(TestCase):
+ def set_up_all(self):
+ self.dut_ports = self.dut.get_ports()
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ "test topo is port 0 is 100G-E810C and port 1 is 25G-E810"
+ self.skip_case(
+ self.check_require_nic_for_test(),
+ "Topology is ICE_100G-E810C_QSFP and ICE_25G-E810_XXV_SFP",
+ )
+ self.cores = "1S/9C/1T"
+ # check core num
+ core_list = self.dut.get_core_list(self.cores)
+ self.verify(len(core_list) >= 9, "Insufficient cores for testing")
+ self.tester_port0 = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_port1 = self.tester.get_local_port(self.dut_ports[1])
+ self.dut_port0_mac = self.dut.get_mac_address(self.dut_ports[0])
+
+ self.pmd_output = PmdOutput(self.dut)
+
+ def get_nic_info_from_ports_cfg(self):
+ """
+ get port.cfg nic type/intf/pci list
+ :return: port config nic list
+ """
+ nic_list = []
+ for id in self.dut.get_ports():
+ nic_dict = {}
+ for info in ["type", "intf", "pci"]:
+ nic_dict[info] = self.dut.ports_info[id][info]
+ if info == "type":
+ nic_dict["name"] = get_nic_name(nic_dict[info])
+ nic_list.append(nic_dict)
+ return nic_list
+
+ def check_require_nic_for_test(self):
+ """
+ check port 0 is E810_100G and port 1 is E810_25G
+ :return: check status, True or False
+ """
+ for id, _nic in enumerate(self.get_nic_info_from_ports_cfg()):
+ if _nic["name"] not in ["ICE_100G-E810C_QSFP", "ICE_25G-E810_XXV_SFP"]:
+ return False
+ if id == 0 and _nic["name"] != "ICE_100G-E810C_QSFP":
+ return False
+ return True
+
+ def launch_testpmd(self, param=""):
+ """
+ start testpmd and check testpmd link status
+ :param param: rxq/txq
+ """
+ self.pmd_output.start_testpmd(self.cores, param=param)
+ res = self.pmd_output.wait_link_status_up("all", timeout=15)
+ self.verify(res is True, "there have port link is down")
+ self.testpmd_flag = True
+
+ def close_testpmd(self):
+ """
+ close testpmd
+ """
+ if not self.testpmd_flag:
+ return
+ try:
+ self.pmd_output.quit()
+ except Exception as e:
+ self.logger.error("The testpmd status is incorrect")
+ self.testpmd_flag = False
+
+ def get_queue_packets_stats(self, port=1):
+ """
+ get testpmd tx pkts stats
+ :param port: tx port
+ :return: pkts list
+ """
+ output = self.pmd_output.execute_cmd("stop")
+ self.pmd_output.execute_cmd("start")
+ p = re.compile("TX Port= %d/Queue=.*\n.*TX-packets: ([0-9]+)\s" % port)
+ tx_pkts = list(map(int, p.findall(output)))
+ return tx_pkts
+
+ def add_stream_to_pktgen(self, txport, rxport, send_pkts, option):
+ """
+ add streams to pktgen and return streams id
+ """
+ stream_ids = []
+ for pkt in send_pkts:
+ _option = deepcopy(option)
+ _option["pcap"] = pkt
+ stream_id = self.tester.pktgen.add_stream(txport, rxport, send_pkts[0])
+ self.tester.pktgen.config_stream(stream_id, _option)
+ stream_ids.append(stream_id)
+ return stream_ids
+
+ def config_stream(self, fields, frame_size=64):
+ """
+ config stream and return pkt
+ """
+ pri = fields
+ pkt_config = {
+ "type": "VLAN_UDP",
+ "pkt_layers": {
+ "ether": {"dst": self.dut_port0_mac},
+ "vlan": {"vlan": pri, "prio": pri},
+ "raw": {"payload": ["58"] * self.get_pkt_len(frame_size)},
+ },
+ }
+ pkt_type = pkt_config.get("type")
+ pkt_layers = pkt_config.get("pkt_layers")
+ pkt = Packet(pkt_type=pkt_type)
+ for layer in list(pkt_layers.keys()):
+ pkt.config_layer(layer, pkt_layers[layer])
+ return pkt.pktgen.pkt
+
+ def testpmd_query_stats(self):
+ """
+ traffic callback function, return port 1 stats
+ """
+ output = self.pmd_output.execute_cmd("show port stats 1")
+ if not output:
+ return
+ port_pat = ".*NIC statistics for (port \d+) .*"
+ rx_pat = ".*Rx-pps:\s+(\d+)\s+Rx-bps:\s+(\d+).*"
+ tx_pat = ".*Tx-pps:\s+(\d+)\s+Tx-bps:\s+(\d+).*"
+ port = re.findall(port_pat, output, re.M)
+ rx = re.findall(rx_pat, output, re.M)
+ tx = re.findall(tx_pat, output, re.M)
+ if not port or not rx or not tx:
+ return
+ stat = {}
+ for port_id, (rx_pps, rx_bps), (tx_pps, tx_bps) in zip(port, rx, tx):
+ stat[port_id] = {
+ "rx_pps": float(rx_pps),
+ "rx_bps": float(rx_bps),
+ "tx_pps": float(tx_pps),
+ "tx_bps": float(tx_bps),
+ }
+ self.pmd_stat = stat
+
+ def get_pkt_len(self, frame_size):
+ HEADER_SIZE["vlan"] = 4
+ headers_size = sum([HEADER_SIZE[x] for x in ["eth", "ip", "vlan", "udp"]])
+ pktlen = frame_size - headers_size
+ return pktlen
+
+ def start_traffic(self, send_pkts):
+ """
+ send stream and return results
+ """
+ self.tester.pktgen.clear_streams()
+ duration = 20
+ s_option = {
+ "stream_config": {
+ "txmode": {},
+ "transmit_mode": TRANSMIT_CONT,
+ "rate": LINERATE,
+ },
+ "fields_config": {
+ "ip": {
+ "src": {
+ "start": "198.18.0.0",
+ "end": "198.18.0.255",
+ "step": 1,
+ "action": "random",
+ },
+ },
+ },
+ }
+ stream_ids = self.add_stream_to_pktgen(
+ self.tester_port0, self.tester_port0, send_pkts, s_option
+ )
+ traffic_opt = {
+ "method": "throughput",
+ "duration": duration,
+ "interval": duration - 5,
+ "callback": self.testpmd_query_stats,
+ }
+ result = self.tester.pktgen.measure(stream_ids, traffic_opt)
+ return result
+
+ def get_traffic_results(self):
+ """
+ get traffic results, append results, port stats, queue stats
+ """
+ stream = []
+ results = []
+ for id in range(len(STREAM_UP_CONFIG)):
+ pkt = self.config_stream(STREAM_UP_CONFIG[id], frame_size=PKT_LEN[id])
+ stream.append(pkt)
+ result = self.start_traffic(stream)
+ queue_stats = self.get_queue_packets_stats()
+ results.append([result, self.pmd_stat, queue_stats])
+ return results
+
+ def check_traffic_throughput(self, expect_results, rel_results):
+ """
+ compare traffic throughput with expect results
+ """
+ status = False
+ for traffic_task, _result in zip(expect_results, rel_results):
+ _expected, unit, port = traffic_task
+ result, pmd_stat, _ = _result
+ real_stat = pmd_stat.get(f"port {port}", {})
+ real_bps = real_stat.get("tx_bps")
+ bias = 10
+ if unit == "MBps":
+ status = ((real_bps / 8 / 1e6 - _expected) * 100 / _expected) < bias
+ elif unit == "-MBps":
+ status = real_bps / 8 / 1e6 < _expected
+ elif unit in ["Gbps", "rGbps"]:
+ status = abs(((real_bps / 1e9 - _expected) * 100 / _expected)) < bias
+ msg = (
+ f"{pformat(traffic_task)}"
+ " not get expected throughput value, real is: "
+ f"{pformat(pmd_stat)}"
+ )
+ self.verify(status, msg)
+
+ def check_queue_pkts_ratio(self, expected, results):
+ """
+ check queue ratio
+ """
+ for result in results:
+ queue_group0 = result[-1][:4]
+ queue_group1 = result[-1][4:]
+ queue_group2 = []
+ if len(expected) == 3:
+ queue_group1 = result[-1][4:8]
+ queue_group2 = result[-1][8:]
+ queue_stats = [queue_group0, queue_group1, queue_group2]
+ for id, ex in enumerate(expected):
+ total_pkts = sum(queue_stats[id])
+ total_ratio = sum(ex)
+ if not ex:
+ self.verify(not total_pkts, "Queue group 1 has not TX throughput")
+ return
+ ratio = []
+ for idx, queue_stat in enumerate(queue_stats[id]):
+ percentage = queue_stat / total_pkts * 100
+ ratio.append(percentage)
+ bias = 10
+ for idx, percentage in enumerate(ex):
+ percentage = percentage / total_ratio * 100
+ _bias = abs(ratio[idx] - percentage) / percentage * 100
+ self.logger.info(
+ "ratio and percentage:{}".format((ratio[idx], percentage))
+ )
+ if _bias < bias:
+ continue
+ else:
+ msg = "can not get expected queue ratio"
+ self.verify(False, msg)
+
+ def check_queue_group_throughput(self, expected, results):
+ """
+ check queue group ratio
+ """
+ for result in results:
+ queue_group0 = result[-1][:4]
+ queue_group1 = result[-1][4:]
+ queue_group2 = []
+ if len(expected) == 3:
+ queue_group1 = result[-1][4:8]
+ queue_group2 = result[-1][8:]
+ queue_stats = [queue_group0, queue_group1, queue_group2]
+ total_pkts = sum(queue_stats)
+ total_ratio = sum(expected)
+ ratio = []
+ for idx, queue_stat in enumerate(queue_stats):
+ percentage = queue_stat / total_pkts * 100
+ ratio.append(percentage)
+ bias = 10
+ for idx, percentage in enumerate(expected):
+ percentage = percentage / total_ratio * 100
+ _bias = abs(ratio[idx] - percentage) / percentage * 100
+ self.logger.info(
+ "ratio and percentage:{}".format((ratio[idx], percentage))
+ )
+ if _bias < bias:
+ continue
+ else:
+ msg = "can not get expected queue ratio"
+ self.verify(False, msg)
+
+ def test_perf_queuegroup_RR_queue_WFQ_RR_nolimit(self):
+
+ self.launch_testpmd(param="--rxq=8 --txq=8")
+ cmds = [
+ "add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 2, 3, 4], [1, 1, 1, 1]]
+ self.check_queue_pkts_ratio(expected, results)
+ expected = [1, 1]
+ self.check_queue_group_throughput(expected, results)
+
+ def test_perf_queuegroup_SP_queue_WFQ_RR_nolimit(self):
+
+ self.launch_testpmd(param="--rxq=8 --txq=8")
+ cmds = [
+ "add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 1 1 3 -1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 2, 3, 4], []]
+ self.check_queue_pkts_ratio(expected, results)
+
+ def test_perf_queuegroup_RR_queue_WFQ_RR(self):
+
+ self.launch_testpmd(param="--rxq=8 --txq=8")
+ cmds = [
+ "add port tm node shaper profile 1 1 300000000 0 300000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 0 1 3 1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 2, 3, 4], [8, 8, 80, 16, 300, 400, 1, 10]]
+ self.check_queue_pkts_ratio(expected, results)
+
+ def test_perf_queuegroup_SP_queue_WFQ_SP(self):
+
+ self.launch_testpmd(param="--rxq=12 --txq=12")
+ cmds = [
+ "add port tm node shaper profile 1 1 300 0 300000000 0 0 0",
+ "add port tm node shaper profile 1 2 300 0 100000000 0 0 0",
+ "add port tm node shaper profile 1 3 300 0 10000000 0 0 0",
+ "add port tm node shaper profile 1 4 300 0 20000000 0 0 0",
+ "add port tm node shaper profile 1 5 200 0 400000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 7 1 3 -1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 3 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 2 1 4 3 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 1 1 4 2 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 2 1 4 4 0 0xffffffff 0 0",
+ "add port tm leaf node 1 8 600000 3 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 9 600000 3 1 4 5 0 0xffffffff 0 0",
+ "add port tm leaf node 1 10 600000 5 1 4 3 0 0xffffffff 0 0",
+ "add port tm leaf node 1 11 600000 7 1 4 3 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 2, 3, 4], [8, 8, 80, 16, 240, 240, 1, 1]]
+ self.check_queue_pkts_ratio(expected, results)
+ expected = [2, 1]
+ self.check_queue_group_throughput(expected, results)
+
+ def test_perf_queuegroup_RR_queue_RR_SP_WFQ(self):
+
+ self.launch_testpmd(param="--rxq=16 --txq=16")
+ cmds = [
+ "add port tm node shaper profile 1 1 300 0 300000000 0 0 0",
+ "add port tm node shaper profile 1 2 100 0 100000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 500000 800000 0 1 3 -1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 2 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 4 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 1 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 7 1 4 2 0 0xffffffff 0 0",
+ "add port tm leaf node 1 8 500000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 9 500000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 10 500000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 11 500000 0 100 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 12 500000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 13 500000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 14 500000 0 5 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 15 500000 0 7 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 1, 1, 1], [8, 1, 20, 1], [4, 2, 2, 100, 3, 1, 5, 7]]
+ self.check_queue_pkts_ratio(expected, results)
+ expected = [1, 1, 1]
+ self.check_queue_group_throughput(expected, results)
+
+ def test_perf_queuegroup_SP_queue_RR_SP_WFQ(self):
+
+ self.launch_testpmd(param="--rxq=16 --txq=16")
+ cmds = [
+ "add port tm node shaper profile 1 1 300 0 300000000 0 0 0",
+ "add port tm node shaper profile 1 2 100 0 100000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 2 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 1 1 3 2 1 0 0",
+ "add port tm nonleaf node 1 500000 800000 2 1 3 1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 4 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 1 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 7 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 8 500000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 9 500000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 10 500000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 11 500000 0 100 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 12 500000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 13 500000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 14 500000 0 5 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 15 500000 0 7 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [4, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[1, 1, 1, 1], [800, 1, 1, 1], [4, 2, 2, 100, 3, 1, 5, 7]]
+ self.check_queue_pkts_ratio(expected, results)
+ expected = [1, 1, 3]
+ self.check_queue_group_throughput(expected, results)
+
+ def test_perf_queuegroup_RR_queue_WFQ_WFQ(self):
+
+ self.launch_testpmd(param="--rxq=8 --txq=8")
+ cmds = [
+ "add port tm node shaper profile 1 1 10000000 0 10000000 0 0 0",
+ "add port tm node shaper profile 1 2 20000000 0 20000000 0 0 0",
+ "add port tm node shaper profile 1 3 30000000 0 30000000 0 0 0",
+ "add port tm node shaper profile 1 4 40000000 0 40000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0",
+ "add port tm leaf node 1 0 700000 0 1 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 4 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 4 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 4 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 0 2 4 3 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 0 4 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ "start",
+ ]
+ for cmd in cmds:
+ self.pmd_output.execute_cmd(cmd)
+
+ traffic_tasks = [
+ [8.25, "Gbps", 1],
+ ]
+ results = self.get_traffic_results()
+ self.check_traffic_throughput(traffic_tasks, results)
+ expected = [[4, 3, 170, 220], [1, 1, 1, 300]]
+ self.check_queue_pkts_ratio(expected, results)
+ expected = [1, 1]
+ self.check_queue_group_throughput(expected, results)
+
+ def test_perf_negative_case(self):
+
+ self.launch_testpmd(param="--rxq=16 --txq=16")
+ cmd1 = [
+ "add port tm node shaper profile 1 1 100000000 0 100000000 0 0 0",
+ "add port tm nonleaf node 1 1000000 -1 0 1 0 -1 1 0 0",
+ "add port tm nonleaf node 1 900000 1000000 0 1 1 -1 1 0 0",
+ "add port tm nonleaf node 1 800000 900000 0 1 2 -1 1 0 0",
+ "add port tm nonleaf node 1 700000 800000 0 1 3 -1 1 0 0",
+ "add port tm nonleaf node 1 600000 800000 0 2 3 -1 1 0 0",
+ ]
+ output = ""
+ for cmd in cmd1:
+ output += self.pmd_output.execute_cmd(cmd)
+ check_msg = "ice_tm_node_add(): weight != 1 not supported in level 3"
+ self.verify(
+ check_msg in output, "Configure invalid parameters, report expected errors."
+ )
+ cmd2 = [
+ "port stop 1",
+ "del port tm node 1 600000",
+ "add port tm nonleaf node 1 600000 800000 0 1 3 -1 1 0 0",
+ "port start 1",
+ "add port tm leaf node 1 0 700000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 1 700000 0 2 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 2 700000 0 3 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 3 700000 0 201 4 -1 0 0xffffffff 0 0",
+ ]
+ output = ""
+ for cmd in cmd2:
+ output += self.pmd_output.execute_cmd(cmd)
+ check_msg = "node weight: weight must be between 1 and 200 (error 21)"
+ self.verify(
+ check_msg in output, "Configure invalid parameters, report expected errors."
+ )
+ cmd3 = [
+ "add port tm leaf node 1 3 700000 0 200 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 4 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 5 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 6 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 7 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 8 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 9 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 10 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 11 600000 8 1 4 -1 0 0xffffffff 0 0",
+ ]
+ output = ""
+ for cmd in cmd3:
+ output += self.pmd_output.execute_cmd(cmd)
+ check_msg = "node priority: priority should be less than 8 (error 20)"
+ self.verify(
+ check_msg in output, "Configure invalid parameters, report expected errors."
+ )
+ cmd4 = [
+ "add port tm leaf node 1 11 600000 7 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 12 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 13 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 14 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "add port tm leaf node 1 15 600000 0 1 4 -1 0 0xffffffff 0 0",
+ "port tm hierarchy commit 1 no",
+ ]
+ output = ""
+ for cmd in cmd4:
+ output += self.pmd_output.execute_cmd(cmd)
+ check_msg = "ice_move_recfg_lan_txq(): move lan queue 12 failed\r\nice_hierarchy_commit(): move queue 12 failed\r\ncause unspecified: (no stated reason) (error 1)"
+ self.verify(
+ check_msg in output, "Configure invalid parameters, report expected errors."
+ )
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.close_testpmd()
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.1
^ permalink raw reply [flat|nested] 3+ messages in thread