[dts][PATCH V3 2/3] test_plans/*:add 22.07 new feature, support in dcf mode

[Zhimin Huang <zhiminx.huang@intel.com>]

add description for support dcf case.
1.set vf trust on.
2.start up testpmd with dcf parm.

Signed-off-by: Zhimin Huang <zhiminx.huang@intel.com>
---
 test_plans/kernelpf_iavf_test_plan.rst | 12 ++++++++++++
 test_plans/vf_macfilter_test_plan.rst  | 16 ++++++++++++++++
 test_plans/vf_offload_test_plan.rst    | 14 ++++++++++++++
 test_plans/vf_rss_test_plan.rst        | 13 +++++++++++++
 test_plans/vf_smoke_test_plan.rst      | 13 +++++++++++++
 test_plans/vf_vlan_test_plan.rst       | 12 ++++++++++++
 6 files changed, 80 insertions(+)

diff --git a/test_plans/kernelpf_iavf_test_plan.rst b/test_plans/kernelpf_iavf_test_plan.rst
index d877bb90..aa7aed82 100644
--- a/test_plans/kernelpf_iavf_test_plan.rst
+++ b/test_plans/kernelpf_iavf_test_plan.rst
@@ -47,6 +47,18 @@ Start up VF port::
 
     ./<build_target>/app/dpdk-testpmd -c f -n 4 -- -i
 
+Or set VF port to dcf and start up::
+
+   Enable kernel trust mode:
+
+       ip link set $PF_INTF vf 0 trust on
+
+    ./<build_target>/app/dpdk-testpmd -c f -n 4 -a 0000:18:01.0,cap=dcf -- -i
+
+.. note::
+
+   make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 Test case: VF basic RX/TX
 =========================
 Set rxonly forward, start testpmd
diff --git a/test_plans/vf_macfilter_test_plan.rst b/test_plans/vf_macfilter_test_plan.rst
index d623cf04..e2f3c355 100644
--- a/test_plans/vf_macfilter_test_plan.rst
+++ b/test_plans/vf_macfilter_test_plan.rst
@@ -77,6 +77,14 @@ Test Case 1: test_kernel_2pf_2vf_1vm_iplink_macfilter
       testpmd> set fwd mac
       testpmd> start
 
+   Or set VF port to dcf and start up::
+
+      ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0,cap=dcf -a 00:07.0,cap=dcf -- -i --portmask=0x3
+
+.. note::
+
+      make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 6. Use scapy to send 100 random packets with ip link set MAC to VF, verify the
    packets can be received by one VF and can be forwarded to another VF
    correctly.
@@ -156,6 +164,14 @@ Test Case 2: test_kernel_2pf_2vf_1vm_mac_add_filter
       testpmd> set fwd mac
       testpmd> start
 
+   Or set VF port to dcf and start up::
+
+      ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x0f -n 4 -a 00:06.0,cap=dcf -a 00:07.0,cap=dcf -- -i --portmask=0x3
+
+.. note::
+
+      make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 6. Use scapy to send 100 random packets with current VF0's MAC, verify the
    packets can be received by one VF and can be forwarded to another VF
    correctly.
diff --git a/test_plans/vf_offload_test_plan.rst b/test_plans/vf_offload_test_plan.rst
index 522fc017..7c6e775a 100644
--- a/test_plans/vf_offload_test_plan.rst
+++ b/test_plans/vf_offload_test_plan.rst
@@ -25,6 +25,20 @@ launch the ``testpmd`` with the following arguments::
   --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x5
   --enable-rx-cksum
 
+Or set VF port to dcf and start up::
+
+   Enable kernel trust mode:
+
+       ip link set $PF_INTF vf 0 trust on
+
+   dpdk-testpmd -c 0x0f -n 4 -a 00:04.0,cap=dcf -a 00:05.0,cap=dcf -- -i --burst=1 --txpt=32 \
+   --txht=8 --txwt=0 --txfreet=0 --rxfreet=64 --mbcache=250 --portmask=0x5
+   --enable-rx-cksum
+
+.. note::
+
+   make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 Set the verbose level to 1 to display information for each received packet::
 
   testpmd> set verbose 1
diff --git a/test_plans/vf_rss_test_plan.rst b/test_plans/vf_rss_test_plan.rst
index 846de2d7..75520206 100644
--- a/test_plans/vf_rss_test_plan.rst
+++ b/test_plans/vf_rss_test_plan.rst
@@ -54,6 +54,19 @@ Testpmd configuration - 4 RX/TX queues per port
 
   dpdk-testpmd -c 1f -n 3  -- -i --rxq=4 --txq=4
 
+
+Or set VF port to dcf and start up::
+
+   Enable kernel trust mode:
+
+       ip link set $PF_INTF vf 0 trust on
+
+    dpdk-testpmd -c 0x0f -n 4 -a 00:04.0,cap=dcf -a 00:05.0,cap=dcf -- -i --rxq=4 --txq=4
+
+.. note::
+
+   make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 Testpmd Configuration Options
 -----------------------------
 
diff --git a/test_plans/vf_smoke_test_plan.rst b/test_plans/vf_smoke_test_plan.rst
index 33a3273c..7698947d 100644
--- a/test_plans/vf_smoke_test_plan.rst
+++ b/test_plans/vf_smoke_test_plan.rst
@@ -59,6 +59,19 @@ Prerequisites
     testpmd> start
     testpmd> show port info all
 
+Or set VF port to dcf and start up::
+
+   Enable kernel trust mode:
+
+       ip link set $PF_INTF vf 0 trust on
+
+    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:86:01.0,cap=dcf --file-prefix=pf -- -i --rxq=4
+    --txq=4
+
+.. note::
+
+   make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 
 Test Case 1: test enable and disable jumbo frame
 ====================================================
diff --git a/test_plans/vf_vlan_test_plan.rst b/test_plans/vf_vlan_test_plan.rst
index 2c38d4dd..4ddf8e6e 100644
--- a/test_plans/vf_vlan_test_plan.rst
+++ b/test_plans/vf_vlan_test_plan.rst
@@ -66,6 +66,18 @@ Prerequisites
      testpmd> set verbose 1
      testpmd> start
 
+Or set VF port to dcf and start up::
+
+   Enable kernel trust mode:
+
+       ip link set $PF_INTF vf 0 trust on
+
+    dpdk-testpmd -c 0x0f -n 4 -a 00:04.0,cap=dcf -a 00:05.0,cap=dcf -- -i --portmask=0x3
+
+.. note::
+
+   make dcf as full feature pmd is dpdk22.07 feature, and only support E810 series nic.
+
 Test Case 1: Add port based vlan on VF
 ======================================
 
-- 
2.17.1