From: Ke Xu <ke1.xu@intel.com>
To: dts@dpdk.org
Cc: lijuan.tu@intel.com, jin.ling@intel.com, zhiminx.huang@intel.com,
weiyuanx.li@intel.com, qi.fu@intel.com, Ke Xu <ke1.xu@intel.com>
Subject: [DTS][PATCH V1 02/21] test_plans/ice_dcf_acl_filter: update test plan to support represented port action from deprecated vf action
Date: Wed, 28 Sep 2022 03:18:21 +0000 [thread overview]
Message-ID: <20220928031836.770004-3-ke1.xu@intel.com> (raw)
In-Reply-To: <20220928031836.770004-1-ke1.xu@intel.com>
Signed-off-by: Jin Ling <jin.ling@intel.com>
Reviewed-by: Ke Xu <ke1.xu@intel.com>
---
test_plans/ice_dcf_acl_filter_test_plan.rst | 62 ++++++++++-----------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/test_plans/ice_dcf_acl_filter_test_plan.rst b/test_plans/ice_dcf_acl_filter_test_plan.rst
index a6d038a0..f047598d 100644
--- a/test_plans/ice_dcf_acl_filter_test_plan.rst
+++ b/test_plans/ice_dcf_acl_filter_test_plan.rst
@@ -90,7 +90,7 @@ Prerequisites
or launch one testpmd on VF0 and VF1::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:86:01.0,cap=dcf -a 86:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0xf -n 4 -a 0000:86:01.0,cap=dcf,representor=vf[1] -a 86:01.1 --file-prefix=vf0 --log-level="ice,7" -- -i
Common steps of basic cases
===========================
@@ -134,9 +134,9 @@ Then the ACL filter can filter the packet with dst mac address.
1. rule::
- flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 00:11:22:33:66:55 / ipv4 / end actions vf id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:66:55 / ipv4 / end actions represented_port ethdev_port_id 1 / end
flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / end actions drop / end
2. matched packets::
@@ -223,9 +223,9 @@ Subcase 6: src mac + dst mac + src ipv4 + dst ipv4(only 2port NIC support)
--------------------------------------------------------------------------
1. rule::
- flow create 0 ingress pattern eth dst is 33:00:00:00:00:01 / ipv4 / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 33:00:00:00:00:02 / ipv4 / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 33:00:00:00:00:03 / ipv4 / end actions vf id 1 / end
+ flow create 0 ingress pattern eth dst is 33:00:00:00:00:01 / ipv4 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 33:00:00:00:00:02 / ipv4 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 33:00:00:00:00:03 / ipv4 / end actions represented_port ethdev_port_id 1 / end
flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 33:00:00:00:00:02 dst mask ff:ff:ff:ff:ff:fe \
/ ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 / end actions drop / end
@@ -277,9 +277,9 @@ Then the ACL filter can filter the packet with dst mac address.
1. rule::
- flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 00:11:22:33:66:55 / ipv4 / tcp / end actions vf id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:44:66 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 00:11:22:33:66:55 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
flow create 0 ingress pattern eth dst spec 00:11:22:33:44:55 dst mask ff:ff:ff:ff:ff:00 / ipv4 / tcp / end actions drop / end
2. matched packets::
@@ -383,9 +383,9 @@ Subcase 8: src mac + dst mac + src ip + dst ip + src port + dst port(only 2ports
---------------------------------------------------------------------------------------------
1. rule::
- flow create 0 ingress pattern eth dst is 00:01:23:45:67:89 / ipv4 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 5E:8E:8B:4D:89:06 / ipv4 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth dst is 5E:8E:8B:4D:90:05 / ipv4 / tcp / end actions vf id 1 / end
+ flow create 0 ingress pattern eth dst is 00:01:23:45:67:89 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 5E:8E:8B:4D:89:06 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth dst is 5E:8E:8B:4D:90:05 / ipv4 / tcp / end actions represented_port ethdev_port_id 1 / end
flow create 0 ingress pattern eth src spec 00:11:22:33:44:55 src mask ff:ff:ff:ff:ff:00 dst spec 00:01:23:45:67:89 dst mask ff:ff:ff:ff:00:ff \
/ ipv4 src spec 192.168.0.1 src mask 255.255.255.0 dst spec 192.168.0.2 dst mask 255.255.0.255 \
/ tcp src spec 8010 src mask 65520 dst spec 8017 dst mask 65520 / end actions drop / end
@@ -878,15 +878,15 @@ Test Case 11: switch/acl/fdir/rss rules combination
2. create rules::
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.20 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.20 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.20 / tcp / end actions vf id 1 / end
- flow create 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.20 / tcp / end actions vf id 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.20 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.20 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.3 dst is 192.168.0.20 / tcp / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.20 / tcp / end actions represented_port ethdev_port_id 1 / end
flow create 0 ingress pattern eth / ipv4 src spec 192.168.0.2 src mask 255.255.255.254 / tcp / end actions drop / end
flow create 0 ingress pattern eth / ipv4 dst spec 192.168.0.21 dst mask 255.255.0.255 / tcp / end actions drop / end
- flow create 1 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
- flow create 1 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
- flow create 1 ingress pattern eth / ipv4 src is 192.168.1.1 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
+ flow create 2 ingress pattern eth / ipv4 src is 192.168.0.1 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
+ flow create 2 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
+ flow create 2 ingress pattern eth / ipv4 src is 192.168.1.1 dst is 192.168.0.20 / tcp src is 22 dst is 23 / end actions queue index 3 / mark / end
3. check the rule list::
@@ -898,7 +898,7 @@ Test Case 11: switch/acl/fdir/rss rules combination
3 0 0 i-- ETH IPV4 TCP => VF
4 0 0 i-- ETH IPV4 TCP => DROP
5 0 0 i-- ETH IPV4 TCP => DROP
- testpmd> flow list 1
+ testpmd> flow list 2
ID Group Prio Attr Rule
0 0 0 i-- ETH IPV4 TCP => QUEUE MARK
1 0 0 i-- ETH IPV4 TCP => QUEUE MARK
@@ -915,14 +915,14 @@ Test Case 11: switch/acl/fdir/rss rules combination
sendp(Ether(src="00:11:22:33:44:55", dst="00:01:23:45:67:89")/IP(src="192.168.1.1", dst="192.168.0.20")/TCP(sport=22,dport=23)/Raw(load="x"*30), iface="enp216s0f0")
sendp(Ether(src="00:11:22:33:44:55", dst="00:01:23:45:67:89")/IP(src="192.168.1.1", dst="192.168.0.21")/TCP(sport=22,dport=23)/Raw(load="x"*30), iface="enp216s0f0")
-5. check packet 1 is received by port 1 and redirected to queue 3 with FDIR matched ID=0x0.
- packet 2 is received by port 1 and distributed by RSS without mark ID.
- packet 3 is dropped by port 1.
- packet 4 is dropped by port 1.
- packet 5 is received by port 1 and distributed by RSS without mark ID.
- packet 6 is can't received by port 0 and port 1.
- packet 7 is received by port 1 and redirected to queue 3 with FDIR matched ID=0x0.
- packet 8 is dropped by port 1.
+5. check packet 1 is received by port 2 and redirected to queue 3 with FDIR matched ID=0x0.
+ packet 2 is received by port 2 and distributed by RSS without mark ID.
+ packet 3 is dropped by port 2.
+ packet 4 is dropped by port 2.
+ packet 5 is received by port 2 and distributed by RSS without mark ID.
+ packet 6 is can't received by port 0 and port 2.
+ packet 7 is received by port 2 and redirected to queue 3 with FDIR matched ID=0x0.
+ packet 8 is dropped by port 2.
6. delete rule ID 4 from port 0 and list the rules::
@@ -941,5 +941,5 @@ Test Case 11: switch/acl/fdir/rss rules combination
sendp(Ether(src="00:11:22:33:44:55", dst="00:01:23:45:67:88")/IP(src="192.168.0.2", dst="192.168.0.20")/TCP(sport=22,dport=23)/Raw(load="x"*30), iface="enp216s0f0")
sendp(Ether(src="00:11:22:33:44:55", dst="00:01:23:45:67:88")/IP(src="192.168.0.3", dst="192.168.0.20")/TCP(sport=22,dport=23)/Raw(load="x"*30), iface="enp216s0f0")
-8. check packet 1 is received by port 1 and redirected to queue 3 with FDIR matched ID=0x0.
- packet 2 is received by port 1 and distributed by RSS without mark ID.
+8. check packet 1 is received by port 2 and redirected to queue 3 with FDIR matched ID=0x0.
+ packet 2 is received by port 2 and distributed by RSS without mark ID.
--
2.25.1
next prev parent reply other threads:[~2022-09-28 3:24 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-28 3:18 [DTS][PATCH V1 00/21] update test plans and tests to support represented port action and port representor action from deprecated vf action on DCF cases Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action Ke Xu
2022-09-28 3:18 ` Ke Xu [this message]
2022-09-28 3:18 ` [DTS][PATCH V1 03/21] test_plans/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 04/21] test_plans/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 05/21] test_plans/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 06/21] test_plans/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 07/21] test_plans/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 08/21] test_plans/ice_dcf_acl_filter: remove redundant white space Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 09/21] test_plans/dcf_lifecycle: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 10/21] test_plans/ice_dcf_data_path: update test plan to support port representor action from deprecated vf action Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 11/21] tests/dcf_lifecycle: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 12/21] tests/ice_dcf_acl_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 13/21] tests/ice_limit_value_test: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 14/21] tests/ice_dcf_flow_priority: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 15/21] tests/ice_dcf_switch_filter_gtpu: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 16/21] tests/ice_dcf_switch_filter_pppoe: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 17/21] tests/ice_qinq: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 18/21] tests/ice_dcf_data_path: update test plan to support port representor " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 19/21] test_plans/ice_dcf_switch_filter: update test plan to support represented port " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 20/21] test/ice_dcf_switch_filter: " Ke Xu
2022-09-28 3:18 ` [DTS][PATCH V1 21/21] test_plans/ice_dcf_switch_filter: add white space to formate the table Ke Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220928031836.770004-3-ke1.xu@intel.com \
--to=ke1.xu@intel.com \
--cc=dts@dpdk.org \
--cc=jin.ling@intel.com \
--cc=lijuan.tu@intel.com \
--cc=qi.fu@intel.com \
--cc=weiyuanx.li@intel.com \
--cc=zhiminx.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).