From: Weiyuan Li <weiyuanx.li@intel.com>
To: dts@dpdk.org
Cc: Weiyuan Li <weiyuanx.li@intel.com>
Subject: [dts][PATCH V1 8/8] tests/dual_vlan: modify script and test plan to support i40e fimware > 8.3
Date: Fri, 7 Oct 2022 19:53:33 +0800 [thread overview]
Message-ID: <20221007115333.29277-8-weiyuanx.li@intel.com> (raw)
In-Reply-To: <20221007115333.29277-1-weiyuanx.li@intel.com>
Modify script and test plan to i40e support fimware > 8.3.
When the fimrware > 8.3, if the filter is to take effect need to enable
extend.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
tests/TestSuite_dual_vlan.py | 393 ++++++++++++++++++++++-------------
1 file changed, 254 insertions(+), 139 deletions(-)
diff --git a/tests/TestSuite_dual_vlan.py b/tests/TestSuite_dual_vlan.py
index 87c5325b..bfc2581a 100644
--- a/tests/TestSuite_dual_vlan.py
+++ b/tests/TestSuite_dual_vlan.py
@@ -14,65 +14,6 @@ import re
import time
import framework.utils as utils
-
-txvlan = 3
-outvlan = 1
-invlan = 2
-
-allResult = {
- "TX+OUTER+INNER": (txvlan, outvlan, invlan),
- "TX+INNER": (txvlan, invlan),
- "TX+OUTER": (txvlan, outvlan),
- "OUTER+INNER": (outvlan, invlan),
- "INNER": (invlan,),
- "OUTER": (outvlan,),
- "NONE": ("No",),
-}
-
-stripCase = 0x1
-filterCase = 0x2
-qinqCase = 0x4
-txCase = 0x8
-
-vlanCaseDef = [
- 0,
- stripCase,
- filterCase,
- filterCase | stripCase,
- qinqCase,
- qinqCase | stripCase,
- qinqCase | filterCase,
- qinqCase | filterCase | stripCase,
- txCase,
- txCase | stripCase,
- txCase | filterCase,
- txCase | filterCase | stripCase,
- txCase | qinqCase,
- txCase | qinqCase | stripCase,
- txCase | qinqCase | filterCase,
- txCase | qinqCase | filterCase | stripCase,
-]
-
-vlanCase = [
- "OUTER+INNER",
- "INNER",
- ("OUTER+INNER", "NONE"),
- ("INNER", "NONE"),
- "OUTER+INNER",
- "OUTER",
- ("NONE", "OUTER+INNER"),
- ("NONE", "OUTER"),
- "TX+OUTER+INNER",
- "TX+INNER",
- ("TX+OUTER+INNER", "NONE"),
- ("TX+INNER", "NONE"),
- "TX+OUTER+INNER",
- "TX+OUTER",
- ("NONE", "TX+OUTER+INNER"),
- ("NONE", "TX+OUTER"),
-]
-
-
from framework.pmd_output import PmdOutput
from framework.test_case import TestCase
@@ -120,6 +61,130 @@ class TestDualVlan(TestCase):
self.verify("Set mac packet forwarding mode" in out, "set fwd mac error")
out = self.dut.send_expect("start", "testpmd> ", 120)
+ if self.kdriver == "i40e" and self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.config_i40e()
+ else:
+ self.config_original()
+
+ def config_original(self):
+ self.txvlan = 3
+ self.outvlan = 1
+ self.invlan = 2
+
+ self.allResult = {
+ "TX+OUTER+INNER": (self.txvlan, self.outvlan, self.invlan),
+ "TX+INNER": (self.txvlan, self.invlan),
+ "TX+OUTER": (self.txvlan, self.outvlan),
+ "OUTER+INNER": (self.outvlan, self.invlan),
+ "INNER": (self.invlan,),
+ "OUTER": (self.outvlan,),
+ "NONE": ("No",),
+ }
+
+ self.stripCase = 0x1
+ self.filterCase = 0x2
+ self.qinqCase = 0x4
+ self.txCase = 0x8
+
+ self.vlanCaseDef = [
+ 0,
+ self.stripCase,
+ self.filterCase,
+ self.filterCase | self.stripCase,
+ self.qinqCase,
+ self.qinqCase | self.stripCase,
+ self.qinqCase | self.filterCase,
+ self.qinqCase | self.filterCase | self.stripCase,
+ self.txCase,
+ self.txCase | self.stripCase,
+ self.txCase | self.filterCase,
+ self.txCase | self.filterCase | self.stripCase,
+ self.txCase | self.qinqCase,
+ self.txCase | self.qinqCase | self.stripCase,
+ self.txCase | self.qinqCase | self.filterCase,
+ self.txCase | self.qinqCase | self.filterCase | self.stripCase,
+ ]
+
+ self.vlanCase = [
+ "OUTER+INNER",
+ "INNER",
+ ("OUTER+INNER", "NONE"),
+ ("INNER", "NONE"),
+ "OUTER+INNER",
+ "OUTER",
+ ("NONE", "OUTER+INNER"),
+ ("NONE", "OUTER"),
+ "TX+OUTER+INNER",
+ "TX+INNER",
+ ("TX+OUTER+INNER", "NONE"),
+ ("TX+INNER", "NONE"),
+ "TX+OUTER+INNER",
+ "TX+OUTER",
+ ("NONE", "TX+OUTER+INNER"),
+ ("NONE", "TX+OUTER"),
+ ]
+
+ def config_i40e(self):
+ self.txvlan = 3
+ self.outvlan = 1
+ self.invlan = 2
+
+ self.allResult = {
+ "TX+OUTER+INNER": (self.txvlan, self.outvlan, self.invlan),
+ "TX+INNER": (self.txvlan, self.invlan),
+ "TX+OUTER": (self.txvlan, self.outvlan),
+ "OUTER+INNER": (self.outvlan, self.invlan),
+ "INNER": (self.invlan,),
+ "OUTER": (self.outvlan,),
+ "NONE": ("No",),
+ }
+
+ self.stripCase = 0x1
+ self.filterCase = 0x2
+ self.qinqCase = 0x4
+ self.txCase = 0x8
+
+ self.vlanCaseDef = [
+ 0,
+ self.stripCase,
+ self.filterCase | self.qinqCase,
+ self.filterCase | self.qinqCase | self.stripCase,
+ self.qinqCase,
+ self.qinqCase | self.stripCase,
+ self.qinqCase | self.filterCase,
+ self.qinqCase | self.filterCase | self.stripCase,
+ self.txCase,
+ self.txCase | self.stripCase,
+ self.txCase | self.filterCase | self.qinqCase,
+ self.txCase | self.filterCase | self.qinqCase | self.stripCase,
+ self.txCase | self.qinqCase,
+ self.txCase | self.qinqCase | self.stripCase,
+ self.txCase | self.qinqCase | self.filterCase,
+ self.txCase | self.qinqCase | self.filterCase | self.stripCase,
+ ]
+
+ self.vlanCase = [
+ "OUTER+INNER",
+ "INNER",
+ ("OUTER+INNER", "NONE"),
+ ("OUTER", "NONE"),
+ "OUTER+INNER",
+ "OUTER",
+ ("OUTER+INNER", "NONE"),
+ ("OUTER", "NONE"),
+ "TX+OUTER+INNER",
+ "TX+INNER",
+ ("TX+OUTER+INNER", "NONE"),
+ ("TX+OUTER", "NONE"),
+ "TX+OUTER+INNER",
+ "TX+OUTER",
+ ("TX+OUTER+INNER", "NONE"),
+ ("TX+OUTER", "NONE"),
+ ]
+
def start_tcpdump(self, rxItf):
self.tester.send_expect("rm -rf ./getPackageByTcpdump.cap", "#")
@@ -174,14 +239,18 @@ class TestDualVlan(TestCase):
# Intel® Ethernet 700 Series NIC vlan filter can't close, if want close need remove rx_vlan
if mode == "filter":
if modeName[mode] == "off":
- self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
- )
+ self.dut.send_expect("vlan set filter off all", "testpmd> ")
continue
else:
- self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
- )
+ self.dut.send_expect("vlan set filter on all", "testpmd> ")
+ if self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.dut.send_expect(
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId),
+ "testpmd> ",
+ )
continue
if mode == "stripq":
@@ -209,14 +278,18 @@ class TestDualVlan(TestCase):
# Intel® Ethernet 700 Series NIC vlan filter can't close, if want close need remove rx_vlan
if mode == "filter":
if modeName[mode] == "off":
- self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
- )
+ self.dut.send_expect("vlan set filter off all", "testpmd> ")
continue
else:
- self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
- )
+ self.dut.send_expect("vlan set filter on all", "testpmd> ")
+ if self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.dut.send_expect(
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId),
+ "testpmd> ",
+ )
continue
if mode == "extend":
@@ -235,22 +308,22 @@ class TestDualVlan(TestCase):
"""
Setup Strip/Filter/Extend/Insert enable/disable for synthetic test.
"""
- caseDef = vlanCaseDef[caseIndex]
+ caseDef = self.vlanCaseDef[caseIndex]
temp = []
- temp.append("on") if (caseDef & stripCase) != 0 else temp.append("off")
- temp.append("on") if (caseDef & filterCase) != 0 else temp.append("off")
- temp.append("on") if (caseDef & qinqCase) != 0 else temp.append("off")
+ temp.append("on") if (caseDef & self.stripCase) != 0 else temp.append("off")
+ temp.append("on") if (caseDef & self.filterCase) != 0 else temp.append("off")
+ temp.append("on") if (caseDef & self.qinqCase) != 0 else temp.append("off")
if (self.nic in ["cavium_a063", "cavium_a064"]) and temp[2] == "on":
## Skip QinQ for cavium devices as it is not supported.
return
self.mode_config(strip=temp[0], filter=temp[1], extend=temp[2])
- if (caseDef & txCase) != 0:
+ if (caseDef & self.txCase) != 0:
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("port stop all", "testpmd> ")
self.dut.send_expect(
- "tx_vlan set %s %s" % (dutTxPortId, txvlan), "testpmd> "
+ "tx_vlan set %s %s" % (dutTxPortId, self.txvlan), "testpmd> "
)
self.dut.send_expect("port start all", "testpmd> ")
self.dut.send_expect("start", "testpmd> ")
@@ -259,27 +332,27 @@ class TestDualVlan(TestCase):
temp[0],
temp[1],
temp[2],
- "on" if (caseDef & txCase) != 0 else "off",
+ "on" if (caseDef & self.txCase) != 0 else "off",
)
- if (caseDef & filterCase) != 0:
+ if (caseDef & self.filterCase) != 0:
self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
- self.vlan_send_packet(outvlan, invlan)
- self.check_result(vlanCase[caseIndex][0], configMode + " result Error")
+ self.vlan_send_packet(self.outvlan, self.invlan)
+ self.check_result(self.vlanCase[caseIndex][0], configMode + " result Error")
self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
self.dut.send_expect(
- "rx_vlan add %s %s" % (invlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.invlan, dutRxPortId), "testpmd> "
)
- self.vlan_send_packet(outvlan, invlan)
- self.check_result(vlanCase[caseIndex][1], configMode + " result Error")
+ self.vlan_send_packet(self.outvlan, self.invlan)
+ self.check_result(self.vlanCase[caseIndex][1], configMode + " result Error")
self.dut.send_expect(
- "rx_vlan rm %s %s" % (invlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.invlan, dutRxPortId), "testpmd> "
)
- if (caseDef & txCase) != 0:
+ if (caseDef & self.txCase) != 0:
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("port stop all", "testpmd> ")
self.dut.send_expect("tx_vlan reset %s" % dutTxPortId, "testpmd> ")
@@ -288,24 +361,24 @@ class TestDualVlan(TestCase):
else:
self.dut.send_expect(
- "rx_vlan add %s %s" % (invlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.invlan, dutRxPortId), "testpmd> "
)
self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
- self.vlan_send_packet(outvlan, invlan)
- self.check_result(vlanCase[caseIndex], configMode + " result Error")
- if (caseDef & txCase) != 0:
+ self.vlan_send_packet(self.outvlan, self.invlan)
+ self.check_result(self.vlanCase[caseIndex], configMode + " result Error")
+ if (caseDef & self.txCase) != 0:
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("port stop all", "testpmd> ")
self.dut.send_expect("tx_vlan reset %s" % dutTxPortId, "testpmd> ")
self.dut.send_expect("port start all", "testpmd> ")
self.dut.send_expect("start", "testpmd> ")
self.dut.send_expect(
- "rx_vlan rm %s %s" % (invlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.invlan, dutRxPortId), "testpmd> "
)
self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
def check_result(self, resultKey, errorString):
@@ -314,14 +387,15 @@ class TestDualVlan(TestCase):
"""
print(("vlan flage config:%s" % errorString))
out = self.get_tcpdump_package()
- if allResult[resultKey][0] == "No":
+ if self.allResult[resultKey][0] == "No":
self.verify("vlan" not in out, errorString)
else:
resultList = []
- for i in range(len(allResult[resultKey]) - 1):
- resultList.append("vlan %s" % allResult[resultKey][i])
+ for i in range(len(self.allResult[resultKey]) - 1):
+ resultList.append("vlan %s" % self.allResult[resultKey][i])
resultList.append(
- "vlan %s" % allResult[resultKey][len(allResult[resultKey]) - 1]
+ "vlan %s"
+ % self.allResult[resultKey][len(self.allResult[resultKey]) - 1]
)
for line in resultList:
self.verify(line in out, "receive packet is wrong:%s" % out)
@@ -338,12 +412,23 @@ class TestDualVlan(TestCase):
"""
self.mode_config(filter="on")
self.mode_config(strip="off")
- self.mode_config(extend="off")
- self.vlan_send_packet(outvlan)
+ # import pdb;pdb.set_trace()
+ if self.kdriver == "i40e" and self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.mode_config(extend="on")
+ self.dut.send_expect(
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
+ )
+ else:
+ self.mode_config(extend="off")
+
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
print(out)
self.verify(
- out is not None and "vlan %s" % outvlan not in out,
+ out is not None and "vlan %s" % self.outvlan not in out,
"Vlan filter enable error: " + out,
)
@@ -359,18 +444,22 @@ class TestDualVlan(TestCase):
"I40E_10G-10G_BASE_T_X722",
]:
self.mode_config(filter="off")
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
- self.verify("vlan %s" % outvlan in out, "Vlan filter disable error: " + out)
+ self.verify(
+ "vlan %s" % self.outvlan in out, "Vlan filter disable error: " + out
+ )
else:
self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
- self.verify("vlan %s" % outvlan in out, "Vlan filter disable error: " + out)
+ self.verify(
+ "vlan %s" % self.outvlan in out, "Vlan filter disable error: " + out
+ )
self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
def test_vlan_filter_table(self):
@@ -380,20 +469,29 @@ class TestDualVlan(TestCase):
self.mode_config(filter="on")
self.mode_config(strip="off")
- self.mode_config(extend="off")
-
- self.dut.send_expect("rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> ")
- self.vlan_send_packet(outvlan)
+ if self.kdriver == "i40e" and self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.mode_config(extend="on")
+ else:
+ self.mode_config(extend="off")
+ self.dut.send_expect(
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
+ )
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
self.verify(
- "vlan %s" % outvlan in out, "vlan filter table enable error: " + out
+ "vlan %s" % self.outvlan in out, "vlan filter table enable error: " + out
)
- self.dut.send_expect("rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> ")
- self.vlan_send_packet(outvlan)
+ self.dut.send_expect(
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
+ )
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
self.verify(
- out is not None and "vlan %s" % outvlan not in out,
+ out is not None and "vlan %s" % self.outvlan not in out,
"vlan filter table disable error: " + out,
)
@@ -417,16 +515,18 @@ class TestDualVlan(TestCase):
"I40E_10G-10G_BASE_T_X722",
]:
self.dut.send_expect(
- "rx_vlan add %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan add %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
- self.verify("vlan %s" % outvlan not in out, "Vlan strip enable error: " + out)
+ self.verify(
+ "vlan %s" % self.outvlan not in out, "Vlan strip enable error: " + out
+ )
self.mode_config(strip="off")
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
- self.verify("vlan %s" % outvlan in out, "Vlan strip disable error: " + out)
+ self.verify("vlan %s" % self.outvlan in out, "Vlan strip disable error: " + out)
if self.nic in [
"ICE_25G-E810C_SFP",
"ICE_100G-E810C_QSFP",
@@ -439,7 +539,7 @@ class TestDualVlan(TestCase):
"I40E_10G-10G_BASE_T_X722",
]:
self.dut.send_expect(
- "rx_vlan rm %s %s" % (outvlan, dutRxPortId), "testpmd> "
+ "rx_vlan rm %s %s" % (self.outvlan, dutRxPortId), "testpmd> "
)
def test_vlan_stripq_config(self):
@@ -450,23 +550,25 @@ class TestDualVlan(TestCase):
self.mode_config(extend="off")
self.mode_config(strip="off")
self.mode_config(stripq="off")
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
self.verify(
- "vlan %s" % outvlan in out, "vlan strip queue disable error : " + out
+ "vlan %s" % self.outvlan in out, "vlan strip queue disable error : " + out
)
# if self.nic in ["I40E_10G-SFP_XL710", "I40E_40G-QSFP_A", "I40E_40G-QSFP_B"]:
self.mode_config(strip="on")
self.mode_config(stripq="on")
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
- self.verify("vlan %s" % outvlan not in out, "vlan strip enable error: " + out)
+ self.verify(
+ "vlan %s" % self.outvlan not in out, "vlan strip enable error: " + out
+ )
self.mode_config(stripq="off")
- self.vlan_send_packet(outvlan)
+ self.vlan_send_packet(self.outvlan)
out = self.get_tcpdump_package()
self.verify(
- "vlan %s" % outvlan in out, "vlan strip queue disable error: " + out
+ "vlan %s" % self.outvlan in out, "vlan strip queue disable error: " + out
)
def test_vlan_insert_config(self):
@@ -482,13 +584,15 @@ class TestDualVlan(TestCase):
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("port stop all", "testpmd> ")
- self.dut.send_expect("tx_vlan set %s %s" % (dutTxPortId, txvlan), "testpmd> ")
+ self.dut.send_expect(
+ "tx_vlan set %s %s" % (dutTxPortId, self.txvlan), "testpmd> "
+ )
self.dut.send_expect("port start all", "testpmd> ")
self.dut.send_expect("start", "testpmd> ")
self.vlan_send_packet()
out = self.get_tcpdump_package()
- self.verify("vlan %s" % txvlan in out, "vlan insert enable error: " + out)
+ self.verify("vlan %s" % self.txvlan in out, "vlan insert enable error: " + out)
self.dut.send_expect("stop", "testpmd> ")
self.dut.send_expect("port stop all", "testpmd> ")
@@ -498,7 +602,9 @@ class TestDualVlan(TestCase):
self.vlan_send_packet()
out = self.get_tcpdump_package()
- self.verify("vlan %s" % txvlan not in out, "vlan insert disable error: " + out)
+ self.verify(
+ "vlan %s" % self.txvlan not in out, "vlan insert disable error: " + out
+ )
def test_vlan_tpid_config(self):
"""
@@ -521,21 +627,30 @@ class TestDualVlan(TestCase):
self.mode_config(filter="on", strip="on", extend="on")
# nic only support inner model, except Intel® Ethernet 700 Series nic
self.dut.send_expect("vlan set inner tpid 0x1234 %s" % dutRxPortId, "testpmd> ")
- self.vlan_send_packet(outvlan, invlan)
+ self.vlan_send_packet(self.outvlan, self.invlan)
out = self.get_tcpdump_package()
self.verify("0x8100" in out, "tpid is error: " + out)
- self.verify("vlan %s" % outvlan in out, "vlan tpid disable error: " + out)
- self.verify("vlan %s" % invlan in out, "vlan tpid disable error: " + out)
+ self.verify("vlan %s" % self.outvlan in out, "vlan tpid disable error: " + out)
+ self.verify("vlan %s" % self.invlan in out, "vlan tpid disable error: " + out)
self.dut.send_expect("vlan set inner tpid 0x8100 %s" % dutRxPortId, "testpmd> ")
- self.vlan_send_packet(outvlan, invlan)
+ self.vlan_send_packet(self.outvlan, self.invlan)
out = self.get_tcpdump_package()
self.verify("0x8100" in out, "tpid is error: " + out)
- self.verify(
- out is not None and "vlan" not in out, "vlane tpid enable error: " + out
- )
+ if self.kdriver == "i40e" and self.nic not in [
+ "I40E_10G-10G_BASE_T_X722",
+ "I40E_10G-SFP_X722",
+ ]:
+ self.verify(
+ out is not None and f"vlan {self.invlan}" not in out,
+ "vlane tpid enable error: " + out,
+ )
+ else:
+ self.verify(
+ out is not None and "vlan" not in out, "vlane tpid enable error: " + out
+ )
def test_vlan_synthetic_test(self):
"""
@@ -544,7 +659,7 @@ class TestDualVlan(TestCase):
self.verify(
self.nic != "IGB_1G-82574L", "sorry, dual vlan cannot support this self.nic"
)
- for i in range(len(vlanCase)):
+ for i in range(len(self.vlanCase)):
self.multimode_test(i)
def test_vlan_random_test(self):
--
2.27.0
prev parent reply other threads:[~2022-10-07 11:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-07 11:53 [dts][PATCH V1 1/8] test_plans/dual_vlan: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 2/8] test_plans/vlan: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 3/8] tests/vlan: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 4/8] test_plans/vlan_ethertype_config: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 5/8] tests/vlan_ethertype_config: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 6/8] test_plans/ipgre: " Weiyuan Li
2022-10-07 11:53 ` [dts][PATCH V1 7/8] tests/ipgre: " Weiyuan Li
2022-10-07 11:53 ` Weiyuan Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221007115333.29277-8-weiyuanx.li@intel.com \
--to=weiyuanx.li@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).