From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V1 1/2] test_plans/vm2vm_virtio_pmd_cbdma_test_plan: modify dmas parameter
Date: Thu, 10 Nov 2022 15:43:42 +0800 [thread overview]
Message-ID: <20221110074342.1815888-1-weix.ling@intel.com> (raw)
From DPDK-22.11, the dmas parameter have been changed by the local patch,
so modify the dmas parameter.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../vm2vm_virtio_pmd_cbdma_test_plan.rst | 71 +++++++++----------
1 file changed, 34 insertions(+), 37 deletions(-)
diff --git a/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst b/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
index 480f02b9..1ea10512 100644
--- a/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
+++ b/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
@@ -85,20 +85,18 @@ Common steps
Test Case 1: VM2VM virtio-pmd split ring mergeable path dynamic queue size with cbdma enable and server mode
------------------------------------------------------------------------------------------------------------
-This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with CBDMA channels,
-check that it can work normally after dynamically changing queue number, reconnection has also been tested.
+This case tests split ring mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous
+operations with CBDMA channels, check that it can work normally after dynamically changing queue number, reconnection has also been tested.
1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
2. Launch the testpmd with 2 vhost ports below commands::
<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
- -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.1;txq3@0000:00:04.1;rxq0@0000:00:04.0;rxq1@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.2;txq1@0000:00:04.2;txq2@0000:00:04.3;txq3@0000:00:04.3;rxq0@0000:00:04.2;rxq1@0000:00:04.2;rxq2@0000:00:04.3;rxq3@0000:00:04.3]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd> start
3. Launch VM1 and VM2 using qemu::
@@ -174,10 +172,9 @@ check that it can work normally after dynamically changing queue number, reconne
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
-a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
-a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.1;rxq2@0000:00:04.2;rxq3@0000:00:04.3;rxq4@0000:00:04.4;rxq5@0000:00:04.5;rxq6@0000:00:04.6;rxq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.1;rxq2@0000:80:04.2;rxq3@0000:80:04.3;rxq4@0000:80:04.4;rxq5@0000:80:04.5;rxq6@0000:80:04.6;rxq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd> start
13. Send packets by testpmd in VM2, check imix packets can looped between two VMs for 1 mins and 8 queues all have packets rx/tx::
@@ -190,19 +187,18 @@ check that it can work normally after dynamically changing queue number, reconne
Test Case 2: VM2VM virtio-pmd split ring non-mergeable path dynamic queue size with cbdma enable and server mode
----------------------------------------------------------------------------------------------------------------
-This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with CBDMA channels,
-check that it can work normally after dynamically changing queue number, reconnection has also been tested.
+This case tests split ring non-mergeable path in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous
+operations with CBDMA channels, check that it can work normally after dynamically changing queue number, reconnection has also been tested.
1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
2. Launch the testpmd with 2 vhost ports below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.1;txq3@0000:00:04.1;rxq0@0000:00:04.0;rxq1@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.1;txq3@0000:00:04.1;rxq0@0000:00:04.0;rxq1@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd> start
3. Launch VM1 and VM2 using qemu::
@@ -275,18 +271,18 @@ check that it can work normally after dynamically changing queue number, reconne
Test Case 3: VM2VM virtio-pmd packed ring mergeable path dynamic queue size with cbdma enable and server mode
-------------------------------------------------------------------------------------------------------------
-This case tests packed ring mergeable path with virtio1.1 and server mode in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with CBDMA channels,check that it can work normally after dynamically changing queue number.
+This case tests packed ring mergeable path with virtio1.1 and server mode in VM2VM vhost-user/virtio-pmd topology
+when vhost uses the asynchronous operations with CBDMA channels, check that it can work normally after dynamically changing queue number.
1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
2. Launch the testpmd with 2 vhost ports below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
- -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 \
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.1;txq3@0000:00:04.1;rxq0@0000:00:04.0;rxq1@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.0;txq2@0000:00:04.1;txq3@0000:00:04.1;rxq0@0000:00:04.0;rxq1@0000:00:04.0;rxq2@0000:00:04.1;rxq3@0000:00:04.1]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4
testpmd> start
3. Launch VM1 and VM2 using qemu::
@@ -375,11 +371,11 @@ This case tests packed ring mergeable path with virtio1.1 and server mode in VM2
12. On host, dynamic change queue numbers::
testpmd> stop
- testpmd> port stop all
+ testpmd> port stop all
testpmd> port config all rxq 8
- testpmd> port config all txq 8
- testpmd> port start all
- testpmd> start
+ testpmd> port config all txq 8
+ testpmd> port start all
+ testpmd> start
13. Send packets by testpmd in VM2::
@@ -393,18 +389,19 @@ This case tests packed ring mergeable path with virtio1.1 and server mode in VM2
Test Case 4: VM2VM virtio-pmd packed ring non-mergeable path dynamic queue size with cbdma enable and server mode
-----------------------------------------------------------------------------------------------------------------
-This case tests packed ring non-mergeable path with virtio1.1 and server mode in VM2VM vhost-user/virtio-pmd topology when vhost uses the asynchronous operations with CBDMA channels,check that it can work normally after dynamically changing queue number.
+This case tests packed ring non-mergeable path with virtio1.1 and server mode in VM2VM vhost-user/virtio-pmd topology
+when vhost uses the asynchronous operations with CBDMA channels,check that it can work normally after dynamically changing queue number.
1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
2. Launch the testpmd with 2 vhost ports below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+ -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
-a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
- --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7]' \
- -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
- --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+ --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0@0000:00:04.0;txq1@0000:00:04.1;txq2@0000:00:04.2;txq3@0000:00:04.3;txq4@0000:00:04.4;txq5@0000:00:04.1;rxq2@0000:00:04.2;rxq3@0000:00:04.3;rxq4@0000:00:04.4;rxq5@0000:00:04.5;rxq6@0000:00:04.6;rxq7@0000:00:04.7]' \
+ --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0@0000:80:04.0;txq1@0000:80:04.1;txq2@0000:80:04.2;txq3@0000:80:04.3;txq4@0000:80:04.4;txq5@0000:80:04.1;rxq2@0000:80:04.2;rxq3@0000:80:04.3;rxq4@0000:80:04.4;rxq5@0000:80:04.5;rxq6@0000:80:04.6;rxq7@0000:80:04.7]' \
+ -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8
testpmd> start
3. Launch VM1 and VM2 using qemu::
--
2.25.1
reply other threads:[~2022-11-10 7:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221110074342.1815888-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).