From: Wei Ling <weix.ling@intel.com>
To: dts@dpdk.org
Cc: Wei Ling <weix.ling@intel.com>
Subject: [dts][PATCH V3 1/2] test_plans/pvp_vhost_user_reconnect: optimization testplan
Date: Mon, 26 Dec 2022 10:32:52 +0800 [thread overview]
Message-ID: <20221226023252.2470817-1-weix.ling@intel.com> (raw)
Optimization format and modify re-launch 5 times in testplan.
Signed-off-by: Wei Ling <weix.ling@intel.com>
---
.../pvp_vhost_user_reconnect_test_plan.rst | 178 +++++++++++-------
1 file changed, 112 insertions(+), 66 deletions(-)
diff --git a/test_plans/pvp_vhost_user_reconnect_test_plan.rst b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
index 6877aec4..ee9d136a 100644
--- a/test_plans/pvp_vhost_user_reconnect_test_plan.rst
+++ b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
@@ -26,13 +26,15 @@ Vhost-user uses Unix domain sockets for passing messages. This means the DPDK vh
Note that QEMU version v2.7 or above is required for split ring cases, and QEMU version v4.2.0 or above is required for packed ring cases.
-Test Case1: vhost-user/virtio-pmd pvp split ring reconnect from vhost-user
-==========================================================================
+Test Case 1: vhost-user/virtio-pmd pvp split ring reconnect from vhost-user
+===========================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-1. Bind one port to vfio-pci, then launch vhost with client mode by below commands::
+1. Bind 1 NIC port to vfio-pci, then launch vhost with client mode by below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -52,7 +54,8 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
3. On VM, bind virtio net to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -63,7 +66,9 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -71,13 +76,15 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
testpmd>show port stats all
-Test Case2: vhost-user/virtio-pmd pvp split ring reconnect from VM
-==================================================================
+Test Case 2: vhost-user/virtio-pmd pvp split ring reconnect from VM
+===================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-1. Bind one port to vfio-pci, then launch vhost with client mode by below commands::
+1. Bind 1 NIC port to vfio-pci, then launch vhost with client mode by below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -107,22 +114,24 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. Reboot the VM, rerun step2-step4, check the reconnection can be established.
-Test Case3: vhost-user/virtio-pmd pvp split ring reconnect stability test
-=========================================================================
+Test Case 3: vhost-user/virtio-pmd pvp split ring reconnect stability test
+==========================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-Similar as Test Case1, all steps are similar except step 5, 6.
+Similar as Test Case 1, all steps are similar except step 5, 6.
-5. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+5. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-6. Reboot VM, then re-launch VM, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
+6. Reboot VM, then re-launch VM, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from vhost-user
==========================================================================================
-1. Bind one port to vfio-pci, launch the vhost by below command::
+1. Bind 1 NIC port to vfio-pci, launch the vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -154,13 +163,15 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. On VM2, bind virtio2 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -171,7 +182,9 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
6. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -182,9 +195,11 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from VMs
===================================================================================
-1. Bind one port to vfio-pci, launch the vhost by below command::
+1. Bind 1 NIC port to vfio-pci, launch the vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -216,13 +231,15 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. On VM2, bind virtio2 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -239,11 +256,11 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
Test Case 6: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect stability test
=========================================================================================
-Similar as Test Case 4, all steps are similar except step 6, 7.
+Similar as Test Case 4, all steps are similar except step 6, 7.
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+6. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-7. Reboot VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
+7. Reboot VMs, then re-launch VMs, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
Test Case 7: vhost-user/virtio-net VM2VM split ring reconnect from vhost-user
=============================================================================
@@ -251,7 +268,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -295,7 +314,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
6. Kill the vhost-user, then re-launch the vhost-user::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
@@ -306,7 +327,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -353,19 +376,21 @@ Test Case 9: vhost-user/virtio-net VM2VM split ring reconnect stability test
============================================================================
Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-Similar as Test Case 7, all steps are similar except step 6.
+Similar as Test Case 7, all steps are similar except step 6.
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+6. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-7. Reboot two VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
+7. Reboot two VMs, then re-launch VMs, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-Test Case10: vhost-user/virtio-pmd pvp packed ring reconnect from vhost-user
-============================================================================
+Test Case 10: vhost-user/virtio-pmd pvp packed ring reconnect from vhost-user
+=============================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-1. Bind one port to vfio-pci, then launch vhost with client mode by below commands::
+1. Bind 1 NIC port to vfio-pci, then launch vhost with client mode by below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -385,7 +410,8 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
3. On VM, bind virtio net to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -396,7 +422,9 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -404,13 +432,15 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
testpmd>show port stats all
-Test Case11: vhost-user/virtio-pmd pvp packed ring reconnect from VM
-====================================================================
+Test Case 11: vhost-user/virtio-pmd pvp packed ring reconnect from VM
+=====================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-1. Bind one port to vfio-pci, then launch vhost with client mode by below commands::
+1. Bind 1 NIC port to vfio-pci, then launch vhost with client mode by below commands::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' -- -i --nb-cores=1
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,client=1,queues=1' \
+ -- -i --nb-cores=1
testpmd>set fwd mac
testpmd>start
@@ -440,22 +470,24 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
5. Reboot the VM, rerun step2-step4, check the reconnection can be established.
-Test Case12: vhost-user/virtio-pmd pvp packed ring reconnect stability test
-===========================================================================
+Test Case 12: vhost-user/virtio-pmd pvp packed ring reconnect stability test
+============================================================================
Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
-Similar as Test Case1, all steps are similar except step 5, 6.
+Similar as Test Case 1, all steps are similar except step 5, 6.
-5. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+5. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-6. Reboot VM, then re-launch VM, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
+6. Reboot VM, then re-launch VM, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect from vhost-user
============================================================================================
-1. Bind one port to vfio-pci, launch the vhost by below command::
+1. Bind 1 NIC port to vfio-pci, launch the vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -487,13 +519,15 @@ Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. On VM2, bind virtio2 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -504,7 +538,9 @@ Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
6. On host, quit vhost-user, then re-launch the vhost-user with below command::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -515,9 +551,11 @@ Test Case 13: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
Test Case 14: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect from VMs
=====================================================================================
-1. Bind one port to vfio-pci, launch the vhost by below command::
+1. Bind 1 NIC port to vfio-pci, launch the vhost by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -549,13 +587,15 @@ Test Case 14: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
4. On VM2, bind virtio2 to vfio-pci and run testpmd::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 \
+ -- -i --port-topology=chained --port-topology=chain --nb-cores=1 --txd=1024 --rxd=1024
testpmd>set fwd mac
testpmd>start
@@ -572,11 +612,11 @@ Test Case 14: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect fro
Test Case 15: vhost-user/virtio-pmd pvp packed ring with multi VMs reconnect stability test
===========================================================================================
-Similar as Test Case 4, all steps are similar except step 6, 7.
+Similar as Test Case 4, all steps are similar except step 6, 7.
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+6. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-7. Reboot VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
+7. Reboot VMs, then re-launch VMs, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
Test Case 16: vhost-user/virtio-net VM2VM packed ring reconnect from vhost-user
===============================================================================
@@ -584,7 +624,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -628,7 +670,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
6. Kill the vhost-user, then re-launch the vhost-user::
testpmd>quit
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
7. Rerun step5, ensure the vhost-user can reconnect to VM again, and the iperf traffic can be continue.
@@ -639,7 +683,9 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
1. Launch the vhost by below commands, enable the client mode and tso::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' -- -i --nb-cores=1 --txd=1024 --rxd=1024
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x30 -n 4 --no-pci --file-prefix=vhost \
+ --vdev 'net_vhost,iface=vhost-net,client=1,queues=1' --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=1' \
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
testpmd>start
3. Launch VM1 and VM2::
@@ -686,8 +732,8 @@ Test Case 18: vhost-user/virtio-net VM2VM packed ring reconnect stability test
==============================================================================
Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
-Similar as Test Case 7, all steps are similar except step 6.
+Similar as Test Case 7, all steps are similar except step 6.
-6. Quit vhost-user, then re-launch, repeat it 5-8 times, check if the reconnect can work and ensure the traffic can continue.
+6. Quit vhost-user, then re-launch, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
-7. Reboot two VMs, then re-launch VMs, repeat it 3-5 times, check if the reconnect can work and ensure the traffic can continue.
\ No newline at end of file
+7. Reboot two VMs, then re-launch VMs, repeat it 5 times, check if the reconnect can work and ensure the traffic can continue.
\ No newline at end of file
--
2.25.1
reply other threads:[~2022-12-26 2:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221226023252.2470817-1-weix.ling@intel.com \
--to=weix.ling@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).