From: Lingli Chen <linglix.chen@intel.com>
To: dts@dpdk.org
Cc: yuan.peng@intel.com, Lingli Chen <linglix.chen@intel.com>
Subject: [dts][PATCH V1 1/2] test_plans/vf_queue_start_stop: add new vf test_plan
Date: Thu, 13 Apr 2023 02:17:29 -0400 [thread overview]
Message-ID: <20230413061730.69065-1-linglix.chen@intel.com> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=y, Size: 5049 bytes --]
add vf_queue_start_stop_test_plan
Signed-off-by: Lingli Chen <linglix.chen@intel.com>
---
test_plans/index.rst | 1 +
test_plans/vf_queue_start_stop_test_plan.rst | 94 ++++++++++++++++++++
2 files changed, 95 insertions(+)
create mode 100644 test_plans/vf_queue_start_stop_test_plan.rst
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 2008f50b..7c72d6eb 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -192,6 +192,7 @@ The following are the test plans for the DPDK DTS automated test system.
vf_packet_rxtx_test_plan
vf_pf_reset_test_plan
vf_port_start_stop_test_plan
+ vf_queue_start_stop_test_plan
vf_rss_test_plan
vf_single_core_perf_test_plan
vf_smoke_test_plan
diff --git a/test_plans/vf_queue_start_stop_test_plan.rst b/test_plans/vf_queue_start_stop_test_plan.rst
new file mode 100644
index 00000000..a1a83450
--- /dev/null
+++ b/test_plans/vf_queue_start_stop_test_plan.rst
@@ -0,0 +1,94 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2023 Intel Corporation
+
+===========================
+VF Shutdown API Queue Tests
+===========================
+
+This tests for Shutdown API feature can be run on linux userspace. It
+will check if NIC vf port can be stopped and restarted without exiting the
+application process. Furthermore, it will check if it can reconfigure
+new configurations for a port after the port is stopped, and if it is
+able to restart with those new configurations. It is based on testpmd
+application.
+
+The test is performed by running the testpmd application and using a
+traffic generator. Port/queue configurations can be set interactively,
+and still be set at the command line when launching the application in
+order to be compatible with previous test framework.
+
+Prerequisites
+-------------
+
+Assume port A and B are connected to the remote ports, e.g. packet generator.
+Get the pci device id of DUT, for example::
+
+ ./usertools/dpdk-devbind.py -s
+
+ 0000:af:00.0 'Ethernet Controller XXV710 for 25GbE SFP28 158b' if=enp175s0f0 drv=i40e unused=vfio-pci
+
+Generate 1 VF on PF::
+
+ echo 1 > /sys/bus/pci/devices/0000:af:00.0/sriov_numvfs
+
+Bind VFs to dpdk driver::
+
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py -b vfio-pci 0000:af:01.0
+
+Test Case: vf queue start/stop
+------------------------------
+
+This case support VF (Intel® Ethernet 700 Series/Intel® Ethernet 800 Series)
+
+#. Launch testpmd::
+ x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-2 -n 4 -a 0000:af:01.0 -- -i --portmask=0x1 --port-topology=loop
+
+#. Run "set verbose 1" to set verbose
+#. Run "set fwd mac" to set fwd type
+#. Run "start" to start fwd package
+
+#. Start a packet capture on the tester in the background::
+ tcpdump -i ens7 'ether[12:2] != 0x88cc' -Q in -w /tmp/tester/sniff_ens7.pcap
+
+#. Start packet generator to transmit packets::
+ sendp([Ether(dst='3c:fd:fe:c1:0f:4c', src='00:00:20:00:00:00')/IP()/UDP()/Raw(load=b'XXXXXXXXXXXXXXXXXX')],iface="ens7",count=4,inter=0,verbose=False)
+
+#. Stop testpmd::
+
+ --------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 4 RX-dropped: 0 RX-total: 4
+ TX-packets: 4 TX-dropped: 0 TX-total: 4
+ ----------------------------------------------------------------------------
+
+#. Quit tcpdump and check tester port receive 4 packets
+
+#. Run "port 0 rxq 0 stop" to stop rxq 0 in port 0
+#. Start packet generator to transmit and check tester port not receive packets
+#. Stop testpmd::
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 0 RX-dropped: 4 RX-total: 4
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
+
+#. Run "port 0 rxq 0 start" to start rxq 0 in port 0
+#. Run "port 0 txq 0 stop" to stop txq 0 in port 0
+#. Start packet generator to transmit and check tester port not receive packets
+ and in testpmd it not has "port 0/queue 0: received 1 packets" print
+#. Stop testpmd::
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 4 RX-dropped: 0 RX-total: 4
+ TX-packets: 0 TX-dropped: 0 TX-total: 0
+ ----------------------------------------------------------------------------
+
+#. Run "port 0 txq 0 start" to start txq 0 in port 0
+#. Start packet generator to transmit and check tester port receive 4 packets
+ and in testpmd it has "port 0/queue 0: received 1 packets" print
+#. Stop testpmd::
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 4 RX-dropped: 0 RX-total: 4
+ TX-packets: 4 TX-dropped: 0 TX-total: 4
+ ----------------------------------------------------------------------------
--
2.17.1
next reply other threads:[~2023-04-13 7:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-13 6:17 Lingli Chen [this message]
2023-04-13 6:17 ` [dts][PATCH V1 2/2] tests/vf_queue_start_stop: add a new vf case Lingli Chen
2023-04-17 1:57 ` Huang, ChenyuX
2023-04-18 3:29 ` Peng, Yuan
2023-04-26 2:58 ` [dts][PATCH V1 1/2] test_plans/vf_queue_start_stop: add new vf test_plan Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230413061730.69065-1-linglix.chen@intel.com \
--to=linglix.chen@intel.com \
--cc=dts@dpdk.org \
--cc=yuan.peng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).