* [dts][PATCH V1] test_plans/pvp_vhost_user_reconnect: optimize qemu startup parameters
@ 2023-06-02 15:01 Dukai Yuan
2023-06-07 7:55 ` lijuan.tu
0 siblings, 1 reply; 2+ messages in thread
From: Dukai Yuan @ 2023-06-02 15:01 UTC (permalink / raw)
To: dts; +Cc: Dukai Yuan
Starting from QEMU 5.2, the "-net" parameter has been removed and replaced by the "-device" parameter.
In the new QEMU version, you can use the "-device" parameter to set network devices.
Signed-off-by: Dukai Yuan <dukaix.yuan@intel.com>
---
.../pvp_vhost_user_reconnect_test_plan.rst | 198 ++++++++++--------
1 file changed, 109 insertions(+), 89 deletions(-)
diff --git a/test_plans/pvp_vhost_user_reconnect_test_plan.rst b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
index ee9d136a..e5bee2fd 100644
--- a/test_plans/pvp_vhost_user_reconnect_test_plan.rst
+++ b/test_plans/pvp_vhost_user_reconnect_test_plan.rst
@@ -40,17 +40,19 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
2. Start VM with 1 virtio device, and set the qemu as server mode::
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
3. On VM, bind virtio net to vfio-pci and run testpmd::
@@ -90,17 +92,19 @@ Flow: TG--> NIC --> Vhost --> Virtio --> Vhost--> NIC--> TG
2. Start VM with 1 virtio device, and set the qemu as server mode::
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
3. On VM, bind virtio net to vfio-pci and run testpmd::
@@ -137,29 +141,33 @@ Test Case 4: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
2. Launch VM1 and VM2::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 12 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 12 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
+ qemu-system-x86_64 -name vm1 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004_2.img -pidfile /tmp/.vm1.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :11
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -vnc :5
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
@@ -205,29 +213,33 @@ Test Case 5: vhost-user/virtio-pmd pvp split ring with multi VMs reconnect from
2. Launch VM1 and VM2::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
+ qemu-system-x86_64 -name vm1 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004_2.img -pidfile /tmp/.vm1.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
- -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :11
+ -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -vnc :5
3. On VM1, bind virtio1 to vfio-pci and run testpmd::
@@ -275,29 +287,33 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
3. Launch VM1 and VM2::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
+
+ qemu-system-x86_64 -name vm1 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004_2.img -pidfile /tmp/.vm1.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.252.214:6001-:22 \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :11
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -vnc :5
4. Set virtio device IP and run arp protocal on two VMs::
@@ -334,29 +350,33 @@ Flow: Virtio-net1 --> Vhost-user --> Virtio-net2
3. Launch VM1 and VM2::
- qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6002-:22 \
- -chardev socket,id=char0,path=./vhost-net,server \
+ qemu-system-x86_64 -name vm0 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004.img -pidfile /tmp/.vm0.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6000-:22 \
+ -chardev socket,path=/tmp/vm0_qga0.sock,server,nowait,id=vm0_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm0_qga0,name=org.qemu.guest_agent.0 \
+ -chardev socket,id=char0,path=./vhost-net0,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :10
-
- qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 2 -m 4096 \
- -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu16-1.img \
- -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
- -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f \
- -net user,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -monitor unix:/tmp/vm0_monitor.sock,server,nowait -vnc :4
+
+ qemu-system-x86_64 -name vm1 -enable-kvm -daemonize \
+ -drive file=/home/image/ubuntu2004_2.img -pidfile /tmp/.vm1.pid \
+ -cpu host -smp 8 -m 8192 -numa node,memdev=mem -mem-prealloc \
+ -object memory-backend-file,id=mem,size=8192M,mem-path=/dev/hugepages,share=on \
+ -device e1000,netdev=nttsip1 \
+ -netdev user,id=nttsip1,hostfwd=tcp:10.239.252.214:6001-:22 \
+ -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 \
+ -device virtio-serial \
+ -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.0 \
-chardev socket,id=char0,path=./vhost-net1,server \
-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,mrg_rxbuf=on,rx_queue_size=1024,tx_queue_size=1024 \
- -vnc :11
+ -monitor unix:/tmp/vm1_monitor.sock,server,nowait -vnc :5
4. Set virtio device IP and run arp protocal on two VMs::
--
2.31.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* [dts][PATCH V1] test_plans/pvp_vhost_user_reconnect: optimize qemu startup parameters
2023-06-02 15:01 [dts][PATCH V1] test_plans/pvp_vhost_user_reconnect: optimize qemu startup parameters Dukai Yuan
@ 2023-06-07 7:55 ` lijuan.tu
0 siblings, 0 replies; 2+ messages in thread
From: lijuan.tu @ 2023-06-07 7:55 UTC (permalink / raw)
To: dts, Dukai Yuan; +Cc: Dukai Yuan
On Fri, 2 Jun 2023 15:01:34 +0000, Dukai Yuan <dukaix.yuan@intel.com> wrote:
> Starting from QEMU 5.2, the "-net" parameter has been removed and replaced by the "-device" parameter.
> In the new QEMU version, you can use the "-device" parameter to set network devices.
>
> Signed-off-by: Dukai Yuan <dukaix.yuan@intel.com>
Applied, thanks
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-06-07 7:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-02 15:01 [dts][PATCH V1] test_plans/pvp_vhost_user_reconnect: optimize qemu startup parameters Dukai Yuan
2023-06-07 7:55 ` lijuan.tu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).