* [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
@ 2020-09-17 6:28 JiangYuX
2020-09-17 6:31 ` Jiang, YuX
0 siblings, 1 reply; 4+ messages in thread
From: JiangYuX @ 2020-09-17 6:28 UTC (permalink / raw)
To: dts; +Cc: JiangYu
From: JiangYu <yux.jiang@intel.com>
1, add 1 cbdma script: test_vhost_gro_tcp_ipv4_with_cbdma_enable
2, modify start_vm: csum=on,gso=on
3, adapt launch_testpmd_gro_on para: mode and queue
Signed-off-by: JiangYu <yux.jiang@intel.com>
---
tests/TestSuite_dpdk_gro_lib.py | 121 ++++++++++++++++++++++++++++++++++++----
1 file changed, 111 insertions(+), 10 deletions(-)
diff --git a/tests/TestSuite_dpdk_gro_lib.py b/tests/TestSuite_dpdk_gro_lib.py
index f2b5b0d..3f23e3e 100644
--- a/tests/TestSuite_dpdk_gro_lib.py
+++ b/tests/TestSuite_dpdk_gro_lib.py
@@ -97,6 +97,12 @@ class TestDPDKGROLib(TestCase):
self.prepare_dpdk()
self.base_dir = self.dut.base_dir.replace('~', '/root')
+ self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
+ # get cbdma device
+ self.cbdma_dev_infos = []
+ self.dmas_info = None
+ self.device_str = None
+
def set_up(self):
#
# Run before each test case.
@@ -106,15 +112,60 @@ class TestDPDKGROLib(TestCase):
self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
- def launch_testpmd_gro_on(self, mode=1):
+ def get_cbdma_ports_info_and_bind_to_dpdk(self, cbdma_num):
+ """
+ get all cbdma ports
+ """
+ str_info = 'Misc (rawdev) devices using kernel driver'
+ out = self.dut.send_expect('./usertools/dpdk-devbind.py --status-dev misc', '# ', 30)
+ device_info = out.split('\n')
+ for device in device_info:
+ pci_info = re.search('\s*(0000:\d*:\d*.\d*)', device)
+ if pci_info is not None:
+ dev_info = pci_info.group(1)
+ # the numa id of ioat dev, only add the device which
+ # on same socket with nic dev
+ bus = int(dev_info[5:7], base=16)
+ if bus >= 128:
+ cur_socket = 1
+ else:
+ cur_socket = 0
+ if self.ports_socket == cur_socket:
+ self.cbdma_dev_infos.append(pci_info.group(1))
+ self.verify(len(self.cbdma_dev_infos) >= cbdma_num, 'There no enough cbdma device to run this suite')
+ used_cbdma = self.cbdma_dev_infos[0:cbdma_num]
+ dmas_info = ''
+ for dmas in used_cbdma:
+ number = used_cbdma.index(dmas)
+ dmas = 'txq{}@{};'.format(number, dmas)
+ dmas_info += dmas
+ self.dmas_info = dmas_info[:-1]
+ self.device_str = ' '.join(self.cbdma_dev_infos)
+ self.dut.setup_modules(self.target, "igb_uio","None")
+ self.dut.send_expect('./usertools/dpdk-devbind.py --force --bind=%s %s' % ("igb_uio", self.device_str), '# ', 60)
+
+ def bind_cbdma_device_to_kernel(self):
+ if self.device_str is not None:
+ self.dut.send_expect('modprobe ioatdma', '# ')
+ self.dut.send_expect('./usertools/dpdk-devbind.py -u %s' % self.device_str, '# ', 30)
+ self.dut.send_expect('./usertools/dpdk-devbind.py --force --bind=ioatdma %s' % self.device_str, '# ', 60)
+
+ def launch_testpmd_gro_on(self, mode=1, queue=1):
#
# Launch the vhost sample with different parameters
# mode 1 : tcp traffic light mode
# mode 2 : tcp traffic heavy mode
# mode 3 : vxlan traffic light mode
# mode 4 : tcp traffic flush 4
- eal_param = self.dut.create_eal_parameters(cores=self.vhost_list, vdevs=['net_vhost0,iface=%s/vhost-net,queues=1' % self.base_dir])
- self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
+ # mode 5 : tcp traffice light mode with cdbma enable
+ if mode == 5:
+ self.get_cbdma_ports_info_and_bind_to_dpdk(cbdma_num=2)
+ self.dut.send_expect('./usertools/dpdk-devbind.py --force --bind=igb_uio %s' % self.pci, '# ', 20)
+ eal_param = self.dut.create_eal_parameters(cores=self.vhost_list, vdevs=["'net_vhost0,iface=%s/vhost-net,queues=%s,dmas=[%s],dmathr=1024'" % (self.base_dir, queue, self.dmas_info)])
+ self.testcmd_start = self.path + eal_param + " -- -i --txd=1024 --rxd=1024 --txq=2 --rxq=2"
+ else:
+ eal_param = self.dut.create_eal_parameters(cores=self.vhost_list, vdevs=['net_vhost0,iface=%s/vhost-net,queues=%s' % (self.base_dir, queue)])
+ self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
self.vhost_user = self.dut.new_session(suite="user")
self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120)
@@ -125,13 +176,13 @@ class TestDPDKGROLib(TestCase):
self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
self.vhost_user.send_expect("csum set ip hw 1", "testpmd> ", 120)
- if(mode == 1):
+ if(mode == 1 or mode == 5):
self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
self.vhost_user.send_expect("set gro flush 1", "testpmd> ", 120)
- if(mode == 2):
+ elif(mode == 2):
self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
- if (mode == 3):
+ elif (mode == 3):
self.vhost_user.send_expect("csum parse-tunnel on 1", "testpmd> ", 120)
self.vhost_user.send_expect("csum parse-tunnel on 0", "testpmd> ", 120)
self.vhost_user.send_expect("csum set outer-ip hw 0", "testpmd> ", 120)
@@ -240,15 +291,18 @@ class TestDPDKGROLib(TestCase):
vm_config.params[i]['cpu'][0]['number'] = 1
vm_config.params[i]['cpu'][0]['cpupin'] = self.qemu_cpupin
- def start_vm(self):
+ def start_vm(self, mode=1, queue=1):
self.vm1 = VM(self.dut, 'vm0', 'vhost_sample')
self.vm1.load_config()
vm_params_1 = {}
vm_params_1['driver'] = 'vhost-user'
vm_params_1['opt_path'] = self.base_dir + '/vhost-net'
vm_params_1['opt_mac'] = self.virtio_mac1
- vm_params_1[
- 'opt_settings'] = 'mrg_rxbuf=on,csum=off,gso=off,host_tso4=on,guest_tso4=on'
+ if mode == 5:
+ vm_params_1['opt_queue'] = queue
+ vm_params_1['opt_settings'] = 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,mq=on,vectors=15'
+ else:
+ vm_params_1['opt_settings'] = 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on'
self.vm1.set_vm_device(**vm_params_1)
self.set_vm_cpu_number(self.vm1)
try:
@@ -275,6 +329,15 @@ class TestDPDKGROLib(TestCase):
self.result_table_print()
self.output_result = "Iperf throughput is %s" % iperfdata[-1]
self.logger.info(self.output_result)
+ iperfdata_kb = 0
+ tmp_value = iperfdata[-1].split(" ")[0]
+ if 'Gbits' in iperfdata[-1]:
+ iperfdata_kb = float(tmp_value)*1000000
+ elif 'Mbits' in iperfdata[-1]:
+ iperfdata_kb = float(tmp_value)*1000
+ else:
+ iperfdata_kb = float(tmp_value)
+ return iperfdata_kb
def test_vhost_gro_tcp_lightmode(self):
self.config_kernel_nic_host(0)
@@ -299,7 +362,7 @@ class TestDPDKGROLib(TestCase):
'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
(self.virtio_ip1), '', 180)
time.sleep(30)
- self.iperf_result_verify('GRO lib')
+ tc1_perfdata = self.iperf_result_verify('GRO lib')
print(("the GRO lib %s " % (self.output_result)))
self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
# Turn off DPDK GRO lib and Kernel GRO off
@@ -313,6 +376,7 @@ class TestDPDKGROLib(TestCase):
self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
self.quit_testpmd()
self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+ self.dut.send_expect('echo %s > /root/dpdk_gro_lib_on_iperf_tc1.log' % tc1_perfdata, '#', 10)
def test_vhost_gro_tcp_heavymode(self):
self.config_kernel_nic_host(0)
@@ -376,6 +440,42 @@ class TestDPDKGROLib(TestCase):
self.quit_testpmd()
self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+ def test_vhost_gro_tcp_ipv4_with_cbdma_enable(self):
+ self.config_kernel_nic_host(0)
+ self.heavymode = 5
+ self.launch_testpmd_gro_on(self.heavymode, queue=2)
+ self.start_vm(mode=5, queue=2)
+ time.sleep(5)
+ self.dut.get_session_output(timeout=2)
+ # Get the virtio-net device name
+ for port in self.vm1_dut.ports_info:
+ self.vm1_intf = port['intf']
+ # Start the Iperf test
+ self.vm1_dut.send_expect('ifconfig -a', '#', 30)
+ self.vm1_dut.send_expect(
+ 'ifconfig %s %s up' %
+ (self.vm1_intf, self.virtio_ip1), '#', 10)
+ self.vm1_dut.send_expect('ethtool -L %s combined 2' % self.vm1_intf, '#', 10)
+ self.vm1_dut.send_expect(
+ 'ethtool -K %s gro off' %
+ (self.vm1_intf), '#', 10)
+ self.vm1_dut.send_expect('iperf -s', '', 10)
+ self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ out = self.dut.send_expect(
+ 'ip netns exec ns1 iperf -c %s -i 1 -t 60 -m -P 2 > /root/iperf_client.log &' %
+ (self.virtio_ip1), '', 180)
+ time.sleep(30)
+ print(out)
+ tc4_perfdata = self.iperf_result_verify('GRO lib')
+ print(("the GRO lib %s " % (self.output_result)))
+ #self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
+ self.quit_testpmd()
+ self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
+ tc1_perfdata = self.dut.send_expect("cat /root/dpdk_gro_lib_on_iperf_tc1.log", "#")
+ self.verify("No such file or directory" not in tc1_perfdata, "Cannot find dpdk_gro_lib_on_iperf_tc1.log, please run test_vhost_gro_tcp_lightmode firstly")
+ if tc1_perfdata:
+ self.verify(float(tc4_perfdata) > float(tc1_perfdata), "TestFailed: W/cbdma iperf data is %s Kbits/sec, W/O cbdma iperf data is %s Kbits/sec" %(tc4_perfdata, tc1_perfdata))
+
def tear_down(self):
"""
Run after each test case.
@@ -390,6 +490,7 @@ class TestDPDKGROLib(TestCase):
self.dut.send_expect(
"./usertools/dpdk-devbind.py -b %s %s" %
(self.pci_drv, self.peer_pci), '# ', 30)
+ self.bind_cbdma_device_to_kernel()
def tear_down_all(self):
"""
--
2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
2020-09-17 6:28 [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script JiangYuX
@ 2020-09-17 6:31 ` Jiang, YuX
2020-09-21 1:08 ` Wang, Yinan
0 siblings, 1 reply; 4+ messages in thread
From: Jiang, YuX @ 2020-09-17 6:31 UTC (permalink / raw)
To: dts; +Cc: Jiang, YuX
[-- Attachment #1: Type: text/plain, Size: 11931 bytes --]
Tested-by: Jiang, YuX <yux.jiang@intel.com>
Best Regards
Jiang yu
> -----Original Message-----
> From: Jiang, YuX
> Sent: Thursday, September 17, 2020 2:28 PM
> To: dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
>
> From: JiangYu <yux.jiang@intel.com>
>
> 1, add 1 cbdma script: test_vhost_gro_tcp_ipv4_with_cbdma_enable
> 2, modify start_vm: csum=on,gso=on
> 3, adapt launch_testpmd_gro_on para: mode and queue
>
> Signed-off-by: JiangYu <yux.jiang@intel.com>
> ---
> tests/TestSuite_dpdk_gro_lib.py | 121
> ++++++++++++++++++++++++++++++++++++----
> 1 file changed, 111 insertions(+), 10 deletions(-)
>
> diff --git a/tests/TestSuite_dpdk_gro_lib.py
> b/tests/TestSuite_dpdk_gro_lib.py index f2b5b0d..3f23e3e 100644
> --- a/tests/TestSuite_dpdk_gro_lib.py
> +++ b/tests/TestSuite_dpdk_gro_lib.py
> @@ -97,6 +97,12 @@ class TestDPDKGROLib(TestCase):
> self.prepare_dpdk()
> self.base_dir = self.dut.base_dir.replace('~', '/root')
>
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + # get cbdma device
> + self.cbdma_dev_infos = []
> + self.dmas_info = None
> + self.device_str = None
> +
> def set_up(self):
> #
> # Run before each test case.
> @@ -106,15 +112,60 @@ class TestDPDKGROLib(TestCase):
> self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
> self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
>
> - def launch_testpmd_gro_on(self, mode=1):
> + def get_cbdma_ports_info_and_bind_to_dpdk(self, cbdma_num):
> + """
> + get all cbdma ports
> + """
> + str_info = 'Misc (rawdev) devices using kernel driver'
> + out = self.dut.send_expect('./usertools/dpdk-devbind.py --status-dev
> misc', '# ', 30)
> + device_info = out.split('\n')
> + for device in device_info:
> + pci_info = re.search('\s*(0000:\d*:\d*.\d*)', device)
> + if pci_info is not None:
> + dev_info = pci_info.group(1)
> + # the numa id of ioat dev, only add the device which
> + # on same socket with nic dev
> + bus = int(dev_info[5:7], base=16)
> + if bus >= 128:
> + cur_socket = 1
> + else:
> + cur_socket = 0
> + if self.ports_socket == cur_socket:
> + self.cbdma_dev_infos.append(pci_info.group(1))
> + self.verify(len(self.cbdma_dev_infos) >= cbdma_num, 'There no
> enough cbdma device to run this suite')
> + used_cbdma = self.cbdma_dev_infos[0:cbdma_num]
> + dmas_info = ''
> + for dmas in used_cbdma:
> + number = used_cbdma.index(dmas)
> + dmas = 'txq{}@{};'.format(number, dmas)
> + dmas_info += dmas
> + self.dmas_info = dmas_info[:-1]
> + self.device_str = ' '.join(self.cbdma_dev_infos)
> + self.dut.setup_modules(self.target, "igb_uio","None")
> + self.dut.send_expect('./usertools/dpdk-devbind.py --force
> + --bind=%s %s' % ("igb_uio", self.device_str), '# ', 60)
> +
> + def bind_cbdma_device_to_kernel(self):
> + if self.device_str is not None:
> + self.dut.send_expect('modprobe ioatdma', '# ')
> + self.dut.send_expect('./usertools/dpdk-devbind.py -u %s' %
> self.device_str, '# ', 30)
> + self.dut.send_expect('./usertools/dpdk-devbind.py --force
> + --bind=ioatdma %s' % self.device_str, '# ', 60)
> +
> + def launch_testpmd_gro_on(self, mode=1, queue=1):
> #
> # Launch the vhost sample with different parameters
> # mode 1 : tcp traffic light mode
> # mode 2 : tcp traffic heavy mode
> # mode 3 : vxlan traffic light mode
> # mode 4 : tcp traffic flush 4
> - eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> vdevs=['net_vhost0,iface=%s/vhost-net,queues=1' % self.base_dir])
> - self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-
> strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
> + # mode 5 : tcp traffice light mode with cdbma enable
> + if mode == 5:
> + self.get_cbdma_ports_info_and_bind_to_dpdk(cbdma_num=2)
> + self.dut.send_expect('./usertools/dpdk-devbind.py --force --
> bind=igb_uio %s' % self.pci, '# ', 20)
> + eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> vdevs=["'net_vhost0,iface=%s/vhost-
> net,queues=%s,dmas=[%s],dmathr=1024'" % (self.base_dir, queue,
> self.dmas_info)])
> + self.testcmd_start = self.path + eal_param + " -- -i --txd=1024 --
> rxd=1024 --txq=2 --rxq=2"
> + else:
> + eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> vdevs=['net_vhost0,iface=%s/vhost-net,queues=%s' % (self.base_dir,
> queue)])
> + self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-
> strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
> self.vhost_user = self.dut.new_session(suite="user")
> self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
> self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120) @@ -
> 125,13 +176,13 @@ class TestDPDKGROLib(TestCase):
> self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
> self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
> self.vhost_user.send_expect("csum set ip hw 1", "testpmd> ", 120)
> - if(mode == 1):
> + if(mode == 1 or mode == 5):
> self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
> self.vhost_user.send_expect("set gro flush 1", "testpmd> ", 120)
> - if(mode == 2):
> + elif(mode == 2):
> self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
> self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
> - if (mode == 3):
> + elif (mode == 3):
> self.vhost_user.send_expect("csum parse-tunnel on 1", "testpmd> ",
> 120)
> self.vhost_user.send_expect("csum parse-tunnel on 0", "testpmd> ",
> 120)
> self.vhost_user.send_expect("csum set outer-ip hw 0", "testpmd> ",
> 120) @@ -240,15 +291,18 @@ class TestDPDKGROLib(TestCase):
> vm_config.params[i]['cpu'][0]['number'] = 1
> vm_config.params[i]['cpu'][0]['cpupin'] = self.qemu_cpupin
>
> - def start_vm(self):
> + def start_vm(self, mode=1, queue=1):
> self.vm1 = VM(self.dut, 'vm0', 'vhost_sample')
> self.vm1.load_config()
> vm_params_1 = {}
> vm_params_1['driver'] = 'vhost-user'
> vm_params_1['opt_path'] = self.base_dir + '/vhost-net'
> vm_params_1['opt_mac'] = self.virtio_mac1
> - vm_params_1[
> - 'opt_settings'] =
> 'mrg_rxbuf=on,csum=off,gso=off,host_tso4=on,guest_tso4=on'
> + if mode == 5:
> + vm_params_1['opt_queue'] = queue
> + vm_params_1['opt_settings'] =
> 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,mq=on,vect
> ors=15'
> + else:
> + vm_params_1['opt_settings'] =
> 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on'
> self.vm1.set_vm_device(**vm_params_1)
> self.set_vm_cpu_number(self.vm1)
> try:
> @@ -275,6 +329,15 @@ class TestDPDKGROLib(TestCase):
> self.result_table_print()
> self.output_result = "Iperf throughput is %s" % iperfdata[-1]
> self.logger.info(self.output_result)
> + iperfdata_kb = 0
> + tmp_value = iperfdata[-1].split(" ")[0]
> + if 'Gbits' in iperfdata[-1]:
> + iperfdata_kb = float(tmp_value)*1000000
> + elif 'Mbits' in iperfdata[-1]:
> + iperfdata_kb = float(tmp_value)*1000
> + else:
> + iperfdata_kb = float(tmp_value)
> + return iperfdata_kb
>
> def test_vhost_gro_tcp_lightmode(self):
> self.config_kernel_nic_host(0)
> @@ -299,7 +362,7 @@ class TestDPDKGROLib(TestCase):
> 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
> (self.virtio_ip1), '', 180)
> time.sleep(30)
> - self.iperf_result_verify('GRO lib')
> + tc1_perfdata = self.iperf_result_verify('GRO lib')
> print(("the GRO lib %s " % (self.output_result)))
> self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> # Turn off DPDK GRO lib and Kernel GRO off @@ -313,6 +376,7 @@ class
> TestDPDKGROLib(TestCase):
> self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> self.quit_testpmd()
> self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + self.dut.send_expect('echo %s >
> + /root/dpdk_gro_lib_on_iperf_tc1.log' % tc1_perfdata, '#', 10)
>
> def test_vhost_gro_tcp_heavymode(self):
> self.config_kernel_nic_host(0)
> @@ -376,6 +440,42 @@ class TestDPDKGROLib(TestCase):
> self.quit_testpmd()
> self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
>
> + def test_vhost_gro_tcp_ipv4_with_cbdma_enable(self):
> + self.config_kernel_nic_host(0)
> + self.heavymode = 5
> + self.launch_testpmd_gro_on(self.heavymode, queue=2)
> + self.start_vm(mode=5, queue=2)
> + time.sleep(5)
> + self.dut.get_session_output(timeout=2)
> + # Get the virtio-net device name
> + for port in self.vm1_dut.ports_info:
> + self.vm1_intf = port['intf']
> + # Start the Iperf test
> + self.vm1_dut.send_expect('ifconfig -a', '#', 30)
> + self.vm1_dut.send_expect(
> + 'ifconfig %s %s up' %
> + (self.vm1_intf, self.virtio_ip1), '#', 10)
> + self.vm1_dut.send_expect('ethtool -L %s combined 2' % self.vm1_intf,
> '#', 10)
> + self.vm1_dut.send_expect(
> + 'ethtool -K %s gro off' %
> + (self.vm1_intf), '#', 10)
> + self.vm1_dut.send_expect('iperf -s', '', 10)
> + self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> + out = self.dut.send_expect(
> + 'ip netns exec ns1 iperf -c %s -i 1 -t 60 -m -P 2 > /root/iperf_client.log
> &' %
> + (self.virtio_ip1), '', 180)
> + time.sleep(30)
> + print(out)
> + tc4_perfdata = self.iperf_result_verify('GRO lib')
> + print(("the GRO lib %s " % (self.output_result)))
> + #self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> + self.quit_testpmd()
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + tc1_perfdata = self.dut.send_expect("cat
> /root/dpdk_gro_lib_on_iperf_tc1.log", "#")
> + self.verify("No such file or directory" not in tc1_perfdata, "Cannot find
> dpdk_gro_lib_on_iperf_tc1.log, please run test_vhost_gro_tcp_lightmode
> firstly")
> + if tc1_perfdata:
> + self.verify(float(tc4_perfdata) > float(tc1_perfdata),
> + "TestFailed: W/cbdma iperf data is %s Kbits/sec, W/O cbdma iperf data
> + is %s Kbits/sec" %(tc4_perfdata, tc1_perfdata))
> +
> def tear_down(self):
> """
> Run after each test case.
> @@ -390,6 +490,7 @@ class TestDPDKGROLib(TestCase):
> self.dut.send_expect(
> "./usertools/dpdk-devbind.py -b %s %s" %
> (self.pci_drv, self.peer_pci), '# ', 30)
> + self.bind_cbdma_device_to_kernel()
>
> def tear_down_all(self):
> """
> --
> 2.7.4
[-- Attachment #2: TestDPDKGROLib+TestVhostUserInterrupt.log --]
[-- Type: application/octet-stream, Size: 81198 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
2020-09-17 6:31 ` Jiang, YuX
@ 2020-09-21 1:08 ` Wang, Yinan
2020-09-23 8:30 ` Tu, Lijuan
0 siblings, 1 reply; 4+ messages in thread
From: Wang, Yinan @ 2020-09-21 1:08 UTC (permalink / raw)
To: Jiang, YuX, dts; +Cc: Jiang, YuX
Acked-by: Wang, Yinan <yinan.wang@intel.com>
> -----Original Message-----
> From: dts <dts-bounces@dpdk.org> On Behalf Of Jiang, YuX
> Sent: 2020?9?17? 14:31
> To: dts@dpdk.org
> Cc: Jiang, YuX <yux.jiang@intel.com>
> Subject: Re: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
>
> Tested-by: Jiang, YuX <yux.jiang@intel.com>
>
> Best Regards
> Jiang yu
>
>
> > -----Original Message-----
> > From: Jiang, YuX
> > Sent: Thursday, September 17, 2020 2:28 PM
> > To: dts@dpdk.org
> > Cc: Jiang, YuX <yux.jiang@intel.com>
> > Subject: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
> >
> > From: JiangYu <yux.jiang@intel.com>
> >
> > 1, add 1 cbdma script: test_vhost_gro_tcp_ipv4_with_cbdma_enable
> > 2, modify start_vm: csum=on,gso=on
> > 3, adapt launch_testpmd_gro_on para: mode and queue
> >
> > Signed-off-by: JiangYu <yux.jiang@intel.com>
> > ---
> > tests/TestSuite_dpdk_gro_lib.py | 121
> > ++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 111 insertions(+), 10 deletions(-)
> >
> > diff --git a/tests/TestSuite_dpdk_gro_lib.py
> > b/tests/TestSuite_dpdk_gro_lib.py index f2b5b0d..3f23e3e 100644
> > --- a/tests/TestSuite_dpdk_gro_lib.py
> > +++ b/tests/TestSuite_dpdk_gro_lib.py
> > @@ -97,6 +97,12 @@ class TestDPDKGROLib(TestCase):
> > self.prepare_dpdk()
> > self.base_dir = self.dut.base_dir.replace('~', '/root')
> >
> > + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> > + # get cbdma device
> > + self.cbdma_dev_infos = []
> > + self.dmas_info = None
> > + self.device_str = None
> > +
> > def set_up(self):
> > #
> > # Run before each test case.
> > @@ -106,15 +112,60 @@ class TestDPDKGROLib(TestCase):
> > self.dut.send_expect("killall -s INT %s" % self.testpmd_name, "#")
> > self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> >
> > - def launch_testpmd_gro_on(self, mode=1):
> > + def get_cbdma_ports_info_and_bind_to_dpdk(self, cbdma_num):
> > + """
> > + get all cbdma ports
> > + """
> > + str_info = 'Misc (rawdev) devices using kernel driver'
> > + out = self.dut.send_expect('./usertools/dpdk-devbind.py --status-dev
> > misc', '# ', 30)
> > + device_info = out.split('\n')
> > + for device in device_info:
> > + pci_info = re.search('\s*(0000:\d*:\d*.\d*)', device)
> > + if pci_info is not None:
> > + dev_info = pci_info.group(1)
> > + # the numa id of ioat dev, only add the device which
> > + # on same socket with nic dev
> > + bus = int(dev_info[5:7], base=16)
> > + if bus >= 128:
> > + cur_socket = 1
> > + else:
> > + cur_socket = 0
> > + if self.ports_socket == cur_socket:
> > + self.cbdma_dev_infos.append(pci_info.group(1))
> > + self.verify(len(self.cbdma_dev_infos) >= cbdma_num, 'There no
> > enough cbdma device to run this suite')
> > + used_cbdma = self.cbdma_dev_infos[0:cbdma_num]
> > + dmas_info = ''
> > + for dmas in used_cbdma:
> > + number = used_cbdma.index(dmas)
> > + dmas = 'txq{}@{};'.format(number, dmas)
> > + dmas_info += dmas
> > + self.dmas_info = dmas_info[:-1]
> > + self.device_str = ' '.join(self.cbdma_dev_infos)
> > + self.dut.setup_modules(self.target, "igb_uio","None")
> > + self.dut.send_expect('./usertools/dpdk-devbind.py --force
> > + --bind=%s %s' % ("igb_uio", self.device_str), '# ', 60)
> > +
> > + def bind_cbdma_device_to_kernel(self):
> > + if self.device_str is not None:
> > + self.dut.send_expect('modprobe ioatdma', '# ')
> > + self.dut.send_expect('./usertools/dpdk-devbind.py -u %s' %
> > self.device_str, '# ', 30)
> > + self.dut.send_expect('./usertools/dpdk-devbind.py --force
> > + --bind=ioatdma %s' % self.device_str, '# ', 60)
> > +
> > + def launch_testpmd_gro_on(self, mode=1, queue=1):
> > #
> > # Launch the vhost sample with different parameters
> > # mode 1 : tcp traffic light mode
> > # mode 2 : tcp traffic heavy mode
> > # mode 3 : vxlan traffic light mode
> > # mode 4 : tcp traffic flush 4
> > - eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> > vdevs=['net_vhost0,iface=%s/vhost-net,queues=1' % self.base_dir])
> > - self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-
> > strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
> > + # mode 5 : tcp traffice light mode with cdbma enable
> > + if mode == 5:
> > + self.get_cbdma_ports_info_and_bind_to_dpdk(cbdma_num=2)
> > + self.dut.send_expect('./usertools/dpdk-devbind.py --force --
> > bind=igb_uio %s' % self.pci, '# ', 20)
> > + eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> > vdevs=["'net_vhost0,iface=%s/vhost-
> > net,queues=%s,dmas=[%s],dmathr=1024'" % (self.base_dir, queue,
> > self.dmas_info)])
> > + self.testcmd_start = self.path + eal_param + " -- -i --txd=1024 --
> > rxd=1024 --txq=2 --rxq=2"
> > + else:
> > + eal_param = self.dut.create_eal_parameters(cores=self.vhost_list,
> > vdevs=['net_vhost0,iface=%s/vhost-net,queues=%s' % (self.base_dir,
> > queue)])
> > + self.testcmd_start = self.path + eal_param + " -- -i --enable-hw-vlan-
> > strip --tx-offloads=0x00 --txd=1024 --rxd=1024"
> > self.vhost_user = self.dut.new_session(suite="user")
> > self.vhost_user.send_expect(self.testcmd_start, "testpmd> ", 120)
> > self.vhost_user.send_expect("set fwd csum", "testpmd> ", 120) @@ -
> > 125,13 +176,13 @@ class TestDPDKGROLib(TestCase):
> > self.vhost_user.send_expect("csum set ip hw 0", "testpmd> ", 120)
> > self.vhost_user.send_expect("csum set tcp hw 1", "testpmd> ", 120)
> > self.vhost_user.send_expect("csum set ip hw 1", "testpmd> ", 120)
> > - if(mode == 1):
> > + if(mode == 1 or mode == 5):
> > self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
> > self.vhost_user.send_expect("set gro flush 1", "testpmd> ", 120)
> > - if(mode == 2):
> > + elif(mode == 2):
> > self.vhost_user.send_expect("set port 0 gro on", "testpmd> ", 120)
> > self.vhost_user.send_expect("set gro flush 2", "testpmd> ", 120)
> > - if (mode == 3):
> > + elif (mode == 3):
> > self.vhost_user.send_expect("csum parse-tunnel on 1", "testpmd> ",
> > 120)
> > self.vhost_user.send_expect("csum parse-tunnel on 0", "testpmd> ",
> > 120)
> > self.vhost_user.send_expect("csum set outer-ip hw 0", "testpmd> ",
> > 120) @@ -240,15 +291,18 @@ class TestDPDKGROLib(TestCase):
> > vm_config.params[i]['cpu'][0]['number'] = 1
> > vm_config.params[i]['cpu'][0]['cpupin'] = self.qemu_cpupin
> >
> > - def start_vm(self):
> > + def start_vm(self, mode=1, queue=1):
> > self.vm1 = VM(self.dut, 'vm0', 'vhost_sample')
> > self.vm1.load_config()
> > vm_params_1 = {}
> > vm_params_1['driver'] = 'vhost-user'
> > vm_params_1['opt_path'] = self.base_dir + '/vhost-net'
> > vm_params_1['opt_mac'] = self.virtio_mac1
> > - vm_params_1[
> > - 'opt_settings'] =
> > 'mrg_rxbuf=on,csum=off,gso=off,host_tso4=on,guest_tso4=on'
> > + if mode == 5:
> > + vm_params_1['opt_queue'] = queue
> > + vm_params_1['opt_settings'] =
> > 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,mq=on,vect
> > ors=15'
> > + else:
> > + vm_params_1['opt_settings'] =
> > 'mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on'
> > self.vm1.set_vm_device(**vm_params_1)
> > self.set_vm_cpu_number(self.vm1)
> > try:
> > @@ -275,6 +329,15 @@ class TestDPDKGROLib(TestCase):
> > self.result_table_print()
> > self.output_result = "Iperf throughput is %s" % iperfdata[-1]
> > self.logger.info(self.output_result)
> > + iperfdata_kb = 0
> > + tmp_value = iperfdata[-1].split(" ")[0]
> > + if 'Gbits' in iperfdata[-1]:
> > + iperfdata_kb = float(tmp_value)*1000000
> > + elif 'Mbits' in iperfdata[-1]:
> > + iperfdata_kb = float(tmp_value)*1000
> > + else:
> > + iperfdata_kb = float(tmp_value)
> > + return iperfdata_kb
> >
> > def test_vhost_gro_tcp_lightmode(self):
> > self.config_kernel_nic_host(0)
> > @@ -299,7 +362,7 @@ class TestDPDKGROLib(TestCase):
> > 'ip netns exec ns1 iperf -c %s -i 1 -t 10 -P 1> /root/iperf_client.log &' %
> > (self.virtio_ip1), '', 180)
> > time.sleep(30)
> > - self.iperf_result_verify('GRO lib')
> > + tc1_perfdata = self.iperf_result_verify('GRO lib')
> > print(("the GRO lib %s " % (self.output_result)))
> > self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> > # Turn off DPDK GRO lib and Kernel GRO off @@ -313,6 +376,7 @@ class
> > TestDPDKGROLib(TestCase):
> > self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> > self.quit_testpmd()
> > self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> > + self.dut.send_expect('echo %s >
> > + /root/dpdk_gro_lib_on_iperf_tc1.log' % tc1_perfdata, '#', 10)
> >
> > def test_vhost_gro_tcp_heavymode(self):
> > self.config_kernel_nic_host(0)
> > @@ -376,6 +440,42 @@ class TestDPDKGROLib(TestCase):
> > self.quit_testpmd()
> > self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> >
> > + def test_vhost_gro_tcp_ipv4_with_cbdma_enable(self):
> > + self.config_kernel_nic_host(0)
> > + self.heavymode = 5
> > + self.launch_testpmd_gro_on(self.heavymode, queue=2)
> > + self.start_vm(mode=5, queue=2)
> > + time.sleep(5)
> > + self.dut.get_session_output(timeout=2)
> > + # Get the virtio-net device name
> > + for port in self.vm1_dut.ports_info:
> > + self.vm1_intf = port['intf']
> > + # Start the Iperf test
> > + self.vm1_dut.send_expect('ifconfig -a', '#', 30)
> > + self.vm1_dut.send_expect(
> > + 'ifconfig %s %s up' %
> > + (self.vm1_intf, self.virtio_ip1), '#', 10)
> > + self.vm1_dut.send_expect('ethtool -L %s combined 2' % self.vm1_intf,
> > '#', 10)
> > + self.vm1_dut.send_expect(
> > + 'ethtool -K %s gro off' %
> > + (self.vm1_intf), '#', 10)
> > + self.vm1_dut.send_expect('iperf -s', '', 10)
> > + self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> > + out = self.dut.send_expect(
> > + 'ip netns exec ns1 iperf -c %s -i 1 -t 60 -m -P 2 > /root/iperf_client.log
> > &' %
> > + (self.virtio_ip1), '', 180)
> > + time.sleep(30)
> > + print(out)
> > + tc4_perfdata = self.iperf_result_verify('GRO lib')
> > + print(("the GRO lib %s " % (self.output_result)))
> > + #self.dut.send_expect('rm /root/iperf_client.log', '#', 10)
> > + self.quit_testpmd()
> > + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> > + tc1_perfdata = self.dut.send_expect("cat
> > /root/dpdk_gro_lib_on_iperf_tc1.log", "#")
> > + self.verify("No such file or directory" not in tc1_perfdata, "Cannot find
> > dpdk_gro_lib_on_iperf_tc1.log, please run test_vhost_gro_tcp_lightmode
> > firstly")
> > + if tc1_perfdata:
> > + self.verify(float(tc4_perfdata) > float(tc1_perfdata),
> > + "TestFailed: W/cbdma iperf data is %s Kbits/sec, W/O cbdma iperf data
> > + is %s Kbits/sec" %(tc4_perfdata, tc1_perfdata))
> > +
> > def tear_down(self):
> > """
> > Run after each test case.
> > @@ -390,6 +490,7 @@ class TestDPDKGROLib(TestCase):
> > self.dut.send_expect(
> > "./usertools/dpdk-devbind.py -b %s %s" %
> > (self.pci_drv, self.peer_pci), '# ', 30)
> > + self.bind_cbdma_device_to_kernel()
> >
> > def tear_down_all(self):
> > """
> > --
> > 2.7.4
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script
2020-09-21 1:08 ` Wang, Yinan
@ 2020-09-23 8:30 ` Tu, Lijuan
0 siblings, 0 replies; 4+ messages in thread
From: Tu, Lijuan @ 2020-09-23 8:30 UTC (permalink / raw)
To: Wang, Yinan, Jiang, YuX, dts; +Cc: Jiang, YuX
> > > Subject: [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma
> > > script
> > >
> > > From: JiangYu <yux.jiang@intel.com>
> > >
> > > 1, add 1 cbdma script: test_vhost_gro_tcp_ipv4_with_cbdma_enable
> > > 2, modify start_vm: csum=on,gso=on
> > > 3, adapt launch_testpmd_gro_on para: mode and queue
> > >
> > > Signed-off-by: JiangYu <yux.jiang@intel.com>> > Tested-by: Jiang, YuX <yux.jiang@intel.com>
> Acked-by: Wang, Yinan <yinan.wang@intel.com>
Applied
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-09-23 8:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-17 6:28 [dts] [PATCH V1] tests/TestSuite_dpdk_gro_lib: add 1 cbdma script JiangYuX
2020-09-17 6:31 ` Jiang, YuX
2020-09-21 1:08 ` Wang, Yinan
2020-09-23 8:30 ` Tu, Lijuan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).