Re: [dts] [PATCH]tests vf_port_start_stop: update test case

["Tu, LijuanX A" <lijuanx.a.tu@intel.com>]

OK ,I Will verify Rx-errors, except fortville

> -----Original Message-----
> From: Pei, Yulong
> Sent: Friday, February 26, 2016 2:16 PM
> To: Tu, LijuanX A; Liu, Yong; dts@dpdk.org; Xu, Qian Q
> Subject: RE: [dts][PATCH]tests vf_port_start_stop: update test case
> 
> Hi Lijuan,
> 
> I think that maybe we keep checking Rx-errors and ignore this issue for
> Fortville NIC and regard it as a known issue is better.
> 
> Best Regards
> Yulong Pei
> 
> -----Original Message-----
> From: Tu, LijuanX A
> Sent: Friday, February 26, 2016 1:13 PM
> To: Liu, Yong <yong.liu@intel.com>; dts@dpdk.org; Pei, Yulong
> <yulong.pei@intel.com>; Xu, Qian Q <qian.q.xu@intel.com>
> Cc: Tu, LijuanX A <lijuanx.a.tu@intel.com>
> Subject: [dts][PATCH]tests vf_port_start_stop: update test case
> 
> Forwarding checking RX-packets, RX-Bytes, Tx-packets, Tx-bytes, Do not
> checking Rx-errors fortville NIC:
>     when not start, the port is ready to RX but NOT RX packets,
>     if you send 119 packets at 64B, then it will be RXed at the NIC's
> hardware buffer
>     if the buffer is full, it will show in RX-errors
>     so we do not verify Rx-errors.
> 
> Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
> ---
>  tests/TestSuite_vf_port_start_stop.py | 48 ++++++++++++++++++++++-----
> --------
>  1 file changed, 30 insertions(+), 18 deletions(-)
> 
> diff --git a/tests/TestSuite_vf_port_start_stop.py
> b/tests/TestSuite_vf_port_start_stop.py
> index 0cc7ffd..17aa589 100644
> --- a/tests/TestSuite_vf_port_start_stop.py
> +++ b/tests/TestSuite_vf_port_start_stop.py
> @@ -114,11 +114,19 @@ class TestVfPortStartStop(TestCase):
>          testpmd.execute_cmd('port stop all')
>          testpmd.execute_cmd('clear port stats all')
> 
> -    def check_port_start_stop(self, testpmd, times=10):
> +    def check_port_start_stop(self, testpmd, times=1000):
>          """
>          VF port start/stop several times , check if it work well.
>          """
> +        port_id_0 = 0
> +        port_id_1 = 1
> +
>          for i in range(times):
> +            vf0_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> +            b_vf0_rx_pkts, b_vf0_rx_bytes = vf0_stats['RX-packets'],
> vf0_stats['RX-bytes']
> +            vf1_stats = self.vm0_testpmd.get_pmd_stats(port_id_1)
> +            b_vf1_tx_pkts, b_vf1_tx_bytes = vf1_stats['TX-packets'],
> + vf1_stats['TX-bytes']
> +
>              out = testpmd.execute_cmd('port start all')
>              self.verify("Checking link statuses" in out, "ERROR: port
> start all")
>              testpmd.execute_cmd('start') @@ -127,22 +135,20 @@ class
> TestVfPortStartStop(TestCase):
>              out = testpmd.execute_cmd('port stop all')
>              self.verify("Checking link statuses" in out, "ERROR: port
> stop all")
> 
> -        port_id_0 = 0
> -        port_id_1 = 1
> -        vf0_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> -        vf1_stats = self.vm0_testpmd.get_pmd_stats(port_id_1)
> -
> -        vf0_rx_cnt = vf0_stats['RX-packets']
> -        self.verify(vf0_rx_cnt != 0, "no packet was received by
> vm0_VF0")
> -
> -        vf0_rx_err = vf0_stats['RX-errors']
> -        self.verify(vf0_rx_err == 0, "vm0_VF0 rx-errors")
> -
> -        vf1_tx_cnt = vf1_stats['TX-packets']
> -        self.verify(vf1_tx_cnt != 0, "no packet was transmitted by
> vm0_VF1")
> -
> -        vf1_tx_err = vf1_stats['TX-errors']
> -        self.verify(vf1_tx_err == 0, "vm0_VF0 tx-errors")
> +            vf0_stats = self.vm0_testpmd.get_pmd_stats(port_id_0)
> +            c_vf0_rx_pkts, c_vf0_rx_bytes = vf0_stats['RX-packets'],
> vf0_stats['RX-bytes']
> +            vf1_stats = self.vm0_testpmd.get_pmd_stats(port_id_1)
> +            c_vf1_tx_pkts, c_vf1_tx_bytes = vf1_stats['TX-packets'],
> + vf1_stats['TX-bytes']
> +
> +            #Fortville NIC :when not start, the port is ready to RX
> but NOT RX packets,
> +            #if you send  packets , then it will be RXed at the NIC's
> hardware buffer
> +            #if buffer is full ,it will show RX-errors
> +            #so, we do not check RX-errors
> +            #compare vf0 RX-packets RX-bytes ,vf1 Tx-packets TX-bytes
> +            self.verify(c_vf0_rx_pkts > b_vf0_rx_pkts, "Packets
> received error")
> +            self.verify(c_vf0_rx_bytes > b_vf0_rx_bytes, "Bytes
> received error")
> +            self.verify(c_vf1_tx_pkts > b_vf1_tx_pkts, "Packets
> forwarding error")
> +            self.verify(c_vf1_tx_bytes > b_vf1_tx_bytes, "Bytes
> + forvwarding error")
> 
>      def setup_1pf_2vf_1vm_env(self, driver='default'):
> 
> @@ -215,11 +221,17 @@ class TestVfPortStartStop(TestCase):
> 
>          self.vm0_testpmd = PmdOutput(self.vm_dut_0)
>          self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> +
> +        self.vm0_testpmd.execute_cmd('port stop all')
> +        self.vm0_testpmd.execute_cmd('port config all crc-strip on')
> +        self.vm0_testpmd.execute_cmd('port start all')
>          self.vm0_testpmd.execute_cmd('set fwd mac')
> +#        self.vm0_testpmd.execute_cmd('start')
> 
>          time.sleep(2)
> 
> -        dst_mac = self.vm_dut_0.get_mac_address(self.vm0_dut_ports[0])
> +        port_id_0 = 0
> +        dst_mac = self.vm0_testpmd.get_port_mac(port_id_0)
>          self.send_and_verify(dst_mac, self.vm0_testpmd)
> 
>      def tear_down(self):
> --
> 1.9.3