test suite reviews and discussions
 help / color / mirror / Atom feed
From: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>
To: "Xu, GangX" <gangx.xu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH V2 1/6] add netmap compat code
Date: Wed, 4 May 2016 02:15:10 +0000	[thread overview]
Message-ID: <38D041F150D4184C8114E499040E6234072B2D77@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <1462245541-2886-1-git-send-email-gangx.xu@intel.com>

Hi all,
 These  patch  Signed-off-by: Signed-off-by: gangx.xu@intel.com

 > -----Original Message-----
 > From: Xu, GangX
 > Sent: Tuesday, May 03, 2016 11:19 AM
 > To: dts@dpdk.org
 > Cc: Tu, LijuanX A
 > Subject: [dts][PATCH V2 1/6] add netmap compat code
 > 
 > From: Lijuan Tu <lijuanx.a.tu@intel.com>
 > 
 > Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
 > ---
 >  tests/TestSuite_netmap_compat.py | 140
 > +++++++++++++++++++++++++++++++++++++++
 >  1 file changed, 140 insertions(+)
 >  create mode 100644 tests/TestSuite_netmap_compat.py
 > 
 > diff --git a/tests/TestSuite_netmap_compat.py
 > b/tests/TestSuite_netmap_compat.py
 > new file mode 100644
 > index 0000000..7b00256
 > --- /dev/null
 > +++ b/tests/TestSuite_netmap_compat.py
 > @@ -0,0 +1,140 @@
 > +#BSD LICENSE
 > +#
 > +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
 > +# All rights reserved.
 > +#
 > +# Redistribution and use in source and binary forms, with or without #
 > +modification, are permitted provided that the following conditions #
 > +are met:
 > +#
 > +#   * Redistributions of source code must retain the above copyright
 > +#     notice, this list of conditions and the following disclaimer.
 > +#   * Redistributions in binary form must reproduce the above copyright
 > +#     notice, this list of conditions and the following disclaimer in
 > +#     the documentation and/or other materials provided with the
 > +#     distribution.
 > +#   * Neither the name of Intel Corporation nor the names of its
 > +#     contributors may be used to endorse or promote products derived
 > +#     from this software without specific prior written permission.
 > +#
 > +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
 > +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
 > +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
 > +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
 > +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
 > +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
 > +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
 > +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
 > +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
 > +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
 > +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 > +
 > +
 > +"""
 > +DPDK Test suite.
 > +Test Netmap_compat.
 > +"""
 > +
 > +import dts
 > +import string
 > +import time
 > +import re
 > +from test_case import TestCase
 > +from plotting import Plotting
 > +from settings import HEADER_SIZE
 > +from etgen import IxiaPacketGenerator
 > +from packet import Packet, sniff_packets, load_sniff_packets
 > +
 > +class TestNetmapCompat(TestCase):
 > +
 > +    def set_up_all(self):
 > +        """
 > +        Run at the start of each test suite.
 > +        """
 > +        self.dut_ports = self.dut.get_ports(self.nic)
 > +        self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
 > +        cores = self.dut.get_core_list("1S/4C/1T")
 > +        self.coremask = dts.create_mask(cores)
 > +
 > +        self.path = "./examples/netmap_compat/build/bridge"
 > +
 > +        # build sample app
 > +        out = self.dut.build_dpdk_apps("./examples/netmap_compat")
 > +        self.verify("Error" not in out, "compilation error 1")
 > +        self.verify("No such file" not in out, "compilation error 2")
 > +
 > +    def set_up(self):
 > +        """
 > +        Run before each test case.
 > +        """
 > +        pass
 > +
 > +    def test_netmap_compat_oneport(self):
 > +        """
 > +        Verify netmap compatibility with one port
 > +        """
 > +        cmd = self.path + " -c %s -n %d -- -i %s" %
 > + (self.coremask,self.dut.get_memory_channels(),self.dut_ports[0])
 > +
 > +        #start netmap_compat with one port
 > +        self.dut.send_expect(cmd,"Port %s now in Netmap mode" %
 > + self.dut_ports[0],60)
 > +
 > +        self.rxItf =
 > + self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]
 > + ))
 > +
 > +        self.inst = sniff_packets(self.rxItf)
 > +
 > +        self.scapy_send_package()
 > +
 > +        out = self.get_tcpdump_package()
 > +        mac = self.dut.get_mac_address(self.dut_ports[0])
 > +        self.verify(mac in out, "Wrong: can't get <%s> package" % mac)
 > +
 > +    def test_netmap_compat_twoport(self):
 > +        """
 > +        Verify netmap compatibility with two port
 > +        """
 > +        cmd = self.path + " -c %s -n %d -- -i %s -i %s" %
 > + (self.coremask,self.dut.get_memory_channels(),self.dut_ports[0],self.d
 > + ut_ports[1])
 > +
 > +        #start netmap_compat with two port
 > +        self.dut.send_expect(cmd,"Port %s now in Netmap mode" %
 > + self.dut_ports[0], 60)
 > +
 > +        self.rxItf =
 > self.tester.get_interface(self.tester.get_local_port(self.dut_ports[1]))
 > +        self.inst = sniff_packets(self.rxItf)
 > +
 > +        self.scapy_send_package()
 > +
 > +        out = self.get_tcpdump_package()
 > +        mac = self.dut.get_mac_address(self.dut_ports[0])
 > +        self.verify(mac in out, "Wrong: can't get <%s> package" % mac)
 > +    def scapy_send_package(self):
 > +        """
 > +        Send a packet to port
 > +        """
 > +        txport = self.tester.get_local_port(self.dut_ports[0])
 > +        mac = self.dut.get_mac_address(self.dut_ports[0])
 > +        txItf = self.tester.get_interface(txport)
 > +
 > self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)],
 > iface="%s")' % (mac, txItf))
 > +        self.tester.scapy_execute()
 > +
 > +
 > +    def get_tcpdump_package(self):
 > +        pkts = load_sniff_packets(self.inst)
 > +        dsts = []
 > +        for packet in pkts:
 > +            dst = packet.strip_element_layer2("dst")
 > +            dsts.append(dst)
 > +        return dsts
 > +
 > +    def tear_down(self):
 > +        """
 > +        Run after each test case.
 > +        """
 > +        self.dut.kill_all()
 > +        time.sleep(2)
 > +        pass
 > +
 > +    def tear_down_all(self):
 > +        """
 > +        Run after each test suite.
 > +        """
 > +        pass
 > +
 > --
 > 1.9.3

      parent reply	other threads:[~2016-05-04  2:15 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-03  3:18 xu,gang
2016-05-03  3:18 ` [dts] [PATCH V1] add sample executable config file xu,gang
2016-05-03  3:18 ` [dts] [PATCH V2 2/6] add rxtx callbacks code xu,gang
2016-05-03  3:18 ` [dts] [PATCH V2 3/6] add skeleton code xu,gang
2016-05-03  3:18 ` [dts] [PATCH V2 4/6] add netmap_compat test plan xu,gang
2016-05-03  3:19 ` [dts] [PATCH V2 5/6] add rxtx_callbacks " xu,gang
2016-05-03  3:19 ` [dts] [PATCH V2 6/6] add skeleton test plan.rst xu,gang
2016-05-04  2:15 ` Tu, LijuanX A [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=38D041F150D4184C8114E499040E6234072B2D77@shsmsx102.ccr.corp.intel.com \
    --to=lijuanx.a.tu@intel.com \
    --cc=dts@dpdk.org \
    --cc=gangx.xu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).