From: "Tu, LijuanX A" <lijuanx.a.tu@intel.com>
To: "Liu, Yong" <yong.liu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH]tests vf_vlan: enable crc-strip of FLV when start testpmd in vm
Date: Wed, 29 Jun 2016 09:11:54 +0000 [thread overview]
Message-ID: <38D041F150D4184C8114E499040E6234072D21EA@shsmsx102.ccr.corp.intel.com> (raw)
In-Reply-To: <577319F8.60908@intel.com>
> -----Original Message-----
> From: Liu, Yong
> Sent: Wednesday, June 29, 2016 8:45 AM
> To: Tu, LijuanX A; dts@dpdk.org
> Subject: Re: [dts] [PATCH]tests vf_vlan: enable crc-strip of FLV when start
> testpmd in vm
>
> Hi Lijuan, one question below.
>
> On 06/24/2016 02:54 PM, Lijuan Tu wrote:
> > For NIC fortville, dpdk16.07 will quit testpmd if VF can't disable HW
> > CRC Strip
> >
> > Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
> > ---
> > tests/TestSuite_vf_vlan.py | 32 ++++++++++++++++++++++++--------
> > 1 file changed, 24 insertions(+), 8 deletions(-)
> >
> > diff --git a/tests/TestSuite_vf_vlan.py b/tests/TestSuite_vf_vlan.py
> > index e32e5bd..1034602 100644
> > --- a/tests/TestSuite_vf_vlan.py
> > +++ b/tests/TestSuite_vf_vlan.py
> > @@ -152,7 +152,10 @@ class TestVfVlan(TestCase):
> > self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> >
> > self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> > - self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > + if self.kdriver == "i40e":
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> > + else:
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > self.vm0_testpmd.execute_cmd('set fwd mac')
> > self.vm0_testpmd.execute_cmd('start')
> >
> > @@ -176,7 +179,7 @@ class TestVfVlan(TestCase):
> > pkt.config_layer('ether', {'dst': self.vf0_mac})
> > elif pkt_type == "VLAN_UDP":
> > pkt = Packet(pkt_type='VLAN_UDP')
> > - pkt.config_layer('dot1q', {'vlan': vlan})
> > + pkt.config_layer('vlan', {'vlan': vlan})
> > pkt.config_layer('ether', {'dst': self.vf0_mac})
> >
> > pkt.send_pkt(tx_port=self.tester_intf0)
> > @@ -197,7 +200,10 @@ class TestVfVlan(TestCase):
> > self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> >
> > self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> > - self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > + if self.kdriver == "i40e":
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> > + else:
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > self.vm0_testpmd.execute_cmd('set fwd rxonly')
> > self.vm0_testpmd.execute_cmd('set verbose 1')
> > self.vm0_testpmd.execute_cmd('start')
> > @@ -249,7 +255,7 @@ class TestVfVlan(TestCase):
> > pkts = load_sniff_packets(inst)
> > vlans = []
> > for pkt in pkts:
> > - vlan = pkt.strip_element_dot1q("vlan")
> > + vlan = pkt.strip_element_vlan("vlan")
> > vlans.append(vlan)
> >
> > self.verify(
> > @@ -262,7 +268,10 @@ class TestVfVlan(TestCase):
> > self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> >
> > self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> > - self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > + if self.kdriver == "i40e":
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> > + else:
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > self.vm0_testpmd.execute_cmd('set verbose 1')
> >
> > for tx_vlan in tx_vlans:
> > @@ -283,10 +292,14 @@ class TestVfVlan(TestCase):
> > self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> >
> > self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> > - self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > + if self.kdriver == "i40e":
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> > + else:
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > self.vm0_testpmd.execute_cmd('set fwd rxonly')
> > self.vm0_testpmd.execute_cmd('set verbose 1')
> > self.vm0_testpmd.execute_cmd('vlan set strip on 0')
> > + self.vm0_testpmd.execute_cmd('vlan set filter on 0')
> > self.vm0_testpmd.execute_cmd('start')
> >
> > # send packet without vlan
> > @@ -334,7 +347,7 @@ class TestVfVlan(TestCase):
> > # send packet with vlan
> > out = self.send_and_getout(vlan=random_vlan, pkt_type="VLAN_UDP")
> > self.verify(
> > - "received 1 packets" in out, "Not received vlan packet without
> vlan filter!!!")
> > + "received 1 packets" not in out, "Not received vlan
> > + packet without vlan filter!!!")
> The original judgment is that check vlan packet received by testpmd. Why
> change this judgment?
[lijuan] vlan set filter on port_id ,and then it should not receive packets.
>
> > self.vm0_testpmd.quit()
> >
> > @@ -345,7 +358,10 @@ class TestVfVlan(TestCase):
> > self.vm0_dut_ports = self.vm_dut_0.get_ports('any')
> >
> > self.vm0_testpmd = PmdOutput(self.vm_dut_0)
> > - self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > + if self.kdriver == "i40e":
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK, '--crc-strip')
> > + else:
> > + self.vm0_testpmd.start_testpmd(VM_CORES_MASK)
> > self.vm0_testpmd.execute_cmd('set fwd rxonly')
> > self.vm0_testpmd.execute_cmd('set verbose 1')
> > self.vm0_testpmd.execute_cmd('start')
next prev parent reply other threads:[~2016-06-29 9:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-24 6:54 Lijuan Tu
2016-06-29 0:44 ` Liu, Yong
2016-06-29 9:11 ` Tu, LijuanX A [this message]
2016-06-29 9:22 ` Liu, Yong
2016-06-29 8:50 Lijuan Tu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=38D041F150D4184C8114E499040E6234072D21EA@shsmsx102.ccr.corp.intel.com \
--to=lijuanx.a.tu@intel.com \
--cc=dts@dpdk.org \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).