From: "Qiu, Michael" <michael.qiu@intel.com>
To: "Liu, Yong" <yong.liu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Subject: Re: [dts] [PATCH v2 4/4] suites: remove nic type check from testsuites
Date: Wed, 4 Feb 2015 06:50:40 +0000 [thread overview]
Message-ID: <533710CFB86FA344BFBF2D6802E60286CD4628@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1423032214-19856-5-git-send-email-yong.liu@intel.com>
On 2/4/2015 2:44 PM, Yong Liu wrote:
> For all nic in execution file will be used for validation. There's
> no need to check nic type in test suites.
>
> Signed-off-by: Marvinliu <yong.liu@intel.com>
> ---
> tests/TestSuite_blacklist.py | 2 +-
> tests/TestSuite_checksum_offload.py | 2 +-
> tests/TestSuite_fdir.py | 16 ++++++++--------
> tests/TestSuite_ieee1588.py | 6 +++---
> tests/TestSuite_ip_pipeline.py | 2 +-
> tests/TestSuite_ipfrag.py | 2 +-
> tests/TestSuite_jumboframes.py | 2 +-
> tests/TestSuite_l2fwd.py | 2 +-
> tests/TestSuite_l3fwd.py | 6 +++---
> tests/TestSuite_link_flowctrl.py | 2 +-
> tests/TestSuite_multiprocess.py | 2 +-
> tests/TestSuite_pmd.py | 4 ++--
> tests/TestSuite_pmd_bonded.py | 2 +-
> tests/TestSuite_vlan.py | 3 +--
> tests/TestSuite_whitelist.py | 2 +-
> 15 files changed, 27 insertions(+), 28 deletions(-)
>
> diff --git a/tests/TestSuite_blacklist.py b/tests/TestSuite_blacklist.py
> index 65c1ec6..8e9debd 100644
> --- a/tests/TestSuite_blacklist.py
> +++ b/tests/TestSuite_blacklist.py
> @@ -54,7 +54,7 @@ class TestBlacklist(TestCase):
> Two Ports
> """
>
> - self.ports = self.dut.get_ports(self.nic)
> + self.ports = self.dut.get_ports()
> self.verify(len(self.ports) >= 2, "Insufficient ports for testing")
> [arch, machine, self.env, toolchain] = self.target.split('-')
>
> diff --git a/tests/TestSuite_checksum_offload.py b/tests/TestSuite_checksum_offload.py
> index 1ebac0f..05438b2 100644
> --- a/tests/TestSuite_checksum_offload.py
> +++ b/tests/TestSuite_checksum_offload.py
> @@ -54,7 +54,7 @@ class TestChecksumOffload(TestCase):
> Checksum offload prerequisites.
> """
> # Based on h/w type, choose how many ports to use
> - self.dut_ports = self.dut.get_ports_performance(self.nic)
> + self.dut_ports = self.dut.get_ports_performance()
>
> # Verify that enough ports are available
> self.verify(len(self.dut_ports) >= 2, "Insufficient ports for testing")
> diff --git a/tests/TestSuite_fdir.py b/tests/TestSuite_fdir.py
> index a9f7fa3..1c8d8f7 100644
> --- a/tests/TestSuite_fdir.py
> +++ b/tests/TestSuite_fdir.py
> @@ -48,7 +48,7 @@ class TestFdir(TestCase):
> """
> Run at the start of each test suite.
> """
> - ports = self.dut.get_ports(self.nic)
> + ports = self.dut.get_ports()
> self.verify(len(ports) >= 2, "Not enough ports available")
>
> self.pmdout = PmdOutput(self.dut)
> @@ -81,7 +81,7 @@ class TestFdir(TestCase):
> Setting memory reserved for FDir filters.
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
>
> self.pmdout.start_testpmd("all", "--rxq=2 --txq=2 --disable-rss --pkt-filter-mode=perfect --pkt-filter-size=64K")
> out = self.dut.send_expect("show port fdir %s" % dutPorts[0], "testpmd>")
> @@ -111,7 +111,7 @@ class TestFdir(TestCase):
> - Send the ``p_udp`` packet with Scapy on the traffic generator and check that FDir information is printed
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> @@ -173,7 +173,7 @@ class TestFdir(TestCase):
> - Send the packet and validate the filter function.
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> @@ -230,7 +230,7 @@ class TestFdir(TestCase):
> - Send the packet and validate the perfect filter function.
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> @@ -261,7 +261,7 @@ class TestFdir(TestCase):
> fields, or parts of fields are used in the matching process.
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> @@ -306,7 +306,7 @@ class TestFdir(TestCase):
> to the bytes at offset 36 and 37, as the offset is in 2-byte units
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> @@ -335,7 +335,7 @@ class TestFdir(TestCase):
> FDir VLAN field filtering
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> localPort = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(localPort)
>
> diff --git a/tests/TestSuite_ieee1588.py b/tests/TestSuite_ieee1588.py
> index c6fdd61..bf48188 100644
> --- a/tests/TestSuite_ieee1588.py
> +++ b/tests/TestSuite_ieee1588.py
> @@ -52,7 +52,7 @@ class TestIeee1588(TestCase):
> IEEE1588 Prerequisites
> """
>
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> self.verify(len(dutPorts) > 0, "No ports found for " + self.nic)
>
> # Change the config file to support IEEE1588 and recompile the package.
> @@ -82,7 +82,7 @@ class TestIeee1588(TestCase):
> time.sleep(1) # Allow the output from the "start" command to finish before looking for a regexp in expect
>
> # use the first port on that self.nic
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> port = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(port)
>
> @@ -125,7 +125,7 @@ class TestIeee1588(TestCase):
> time.sleep(3)
>
> # use the first port on that self.nic
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> port = self.tester.get_local_port(dutPorts[0])
> itf = self.tester.get_interface(port)
>
> diff --git a/tests/TestSuite_ip_pipeline.py b/tests/TestSuite_ip_pipeline.py
> index 7da393e..46fdc8d 100644
> --- a/tests/TestSuite_ip_pipeline.py
> +++ b/tests/TestSuite_ip_pipeline.py
> @@ -297,7 +297,7 @@ class TestIPPipeline(TestCase):
> "I217LM": 1,
> "I218V": 1,
> "I218LM": 1}
> - self.dut_ports = self.dut.get_ports(self.nic)
> + self.dut_ports = self.dut.get_ports()
> self.verify(len(self.dut_ports) >= self.needed_ports[self.nic],
> "Insufficient ports for speed testing")
>
> diff --git a/tests/TestSuite_ipfrag.py b/tests/TestSuite_ipfrag.py
> index 1f08c85..22a24a6 100644
> --- a/tests/TestSuite_ipfrag.py
> +++ b/tests/TestSuite_ipfrag.py
> @@ -81,7 +81,7 @@ class TestIpfrag(TestCase):
> """
>
> # Based on h/w type, choose how many ports to use
> - ports = self.dut.get_ports(self.nic)
> + ports = self.dut.get_ports()
> print ports
>
> # Verify that enough ports are available
> diff --git a/tests/TestSuite_jumboframes.py b/tests/TestSuite_jumboframes.py
> index 2b862af..83b3427 100644
> --- a/tests/TestSuite_jumboframes.py
> +++ b/tests/TestSuite_jumboframes.py
> @@ -113,7 +113,7 @@ class TestJumboframes(TestCase):
> Prerequisite steps for each test suit.
> """
>
> - self.dut_ports = self.dut.get_ports(self.nic)
> + self.dut_ports = self.dut.get_ports()
> self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
> self.rx_port = self.dut_ports[0]
> self.tx_port = self.dut_ports[1]
> diff --git a/tests/TestSuite_l2fwd.py b/tests/TestSuite_l2fwd.py
> index b75163c..5c79cbf 100644
> --- a/tests/TestSuite_l2fwd.py
> +++ b/tests/TestSuite_l2fwd.py
> @@ -83,7 +83,7 @@ class TestL2fwd(TestCase):
> self.headers_size = HEADER_SIZE['eth'] + HEADER_SIZE['ip'] + \
> HEADER_SIZE['udp']
>
> - self.dut_ports = self.dut.get_ports_performance(self.nic)
> + self.dut_ports = self.dut.get_ports_performance()
>
> self.verify(len(self.dut_ports) >= self.number_of_ports,
> "Not enough ports for " + self.nic)
> diff --git a/tests/TestSuite_l3fwd.py b/tests/TestSuite_l3fwd.py
> index f590a52..65fa6f7 100644
> --- a/tests/TestSuite_l3fwd.py
> +++ b/tests/TestSuite_l3fwd.py
> @@ -309,9 +309,9 @@ class TestL3fwd(TestCase):
> L3fwd Prerequisites
> """
> # Based on h/w type, choose how many ports to use
> - ports = self.dut.get_ports(self.nic, socket=1)
> + ports = self.dut.get_ports(socket=1)
> if not ports:
> - ports = self.dut.get_ports(self.nic, socket=0)
> + ports = self.dut.get_ports(socket=0)
>
> # Verify that enough ports are available
> self.verify(len(ports) >= 2, "Insufficient ports for speed testing")
> @@ -473,7 +473,7 @@ class TestL3fwd(TestCase):
> """
>
> # Based on h/w type, choose how many ports to use
> - ports = self.dut.get_ports(self.nic)
> + ports = self.dut.get_ports()
> # Verify that enough ports are available
> self.verify(len(ports) >= 4, "Insufficient ports for speed testing")
>
> diff --git a/tests/TestSuite_link_flowctrl.py b/tests/TestSuite_link_flowctrl.py
> index 3c195c9..e52f95a 100644
> --- a/tests/TestSuite_link_flowctrl.py
> +++ b/tests/TestSuite_link_flowctrl.py
> @@ -64,7 +64,7 @@ class TestLinkFlowctrl(TestCase):
> Link flow control Prerequisites
> """
>
> - self.dutPorts = self.dut.get_ports(self.nic)
> + self.dutPorts = self.dut.get_ports()
> self.verify(len(self.dutPorts) > 1, "Insuficient ports")
>
> self.rx_port = self.dutPorts[0]
> diff --git a/tests/TestSuite_multiprocess.py b/tests/TestSuite_multiprocess.py
> index 2c8eeba..4ef5313 100644
> --- a/tests/TestSuite_multiprocess.py
> +++ b/tests/TestSuite_multiprocess.py
> @@ -191,7 +191,7 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> """
> self.dut.kill_all()
> self.dut.send_expect("fg", "# ")
> - dutPorts = self.dut.get_ports(self.nic)
> + dutPorts = self.dut.get_ports()
> txPort = self.tester.get_local_port(dutPorts[0])
> rxPort = self.tester.get_local_port(dutPorts[1])
> mac = self.tester.get_mac(txPort)
> diff --git a/tests/TestSuite_pmd.py b/tests/TestSuite_pmd.py
> index b88352f..c5b7e3b 100644
> --- a/tests/TestSuite_pmd.py
> +++ b/tests/TestSuite_pmd.py
> @@ -108,7 +108,7 @@ class TestPmd(TestCase):
> "NIC Unsupported: " + str(self.nic))
>
> # Based on h/w type, choose how many ports to use
> - self.dut_ports = self.dut.get_ports(self.nic)
> + self.dut_ports = self.dut.get_ports()
>
> # Verify that enough ports are available
> self.verify(len(self.dut_ports) >= self.needed_ports[self.nic],
> @@ -166,7 +166,7 @@ class TestPmd(TestCase):
> queues = 1
>
> core_mask = dts.create_mask(core_list)
> - port_mask = dts.create_mask(self.dut.get_ports(self.nic))
> + port_mask = dts.create_mask(self.dut.get_ports())
>
> self.pmdout.start_testpmd("all", "--coremask=%s --rxq=%d --txq=%d --portmask=%s" % (core_mask, queues, queues, port_mask))
>
> diff --git a/tests/TestSuite_pmd_bonded.py b/tests/TestSuite_pmd_bonded.py
> index e8e61dd..fd15c1d 100644
> --- a/tests/TestSuite_pmd_bonded.py
> +++ b/tests/TestSuite_pmd_bonded.py
> @@ -792,7 +792,7 @@ UDP(sport=srcport, dport=destport)/Raw(load="\x50"*%s)], iface="%s", count=%d)'
> self.ip_head_size = 20
> self.udp_header_size = 8
>
> - self.dut_ports = self.dut.get_ports(self.nic)
> + self.dut_ports = self.dut.get_ports()
>
> self.port_mask = dts.create_mask(self.dut_ports)
>
> diff --git a/tests/TestSuite_vlan.py b/tests/TestSuite_vlan.py
> index e9813f3..66dc4f3 100644
> --- a/tests/TestSuite_vlan.py
> +++ b/tests/TestSuite_vlan.py
> @@ -53,12 +53,11 @@ class TestVlan(TestCase):
> """
>
> # Based on h/w type, choose how many ports to use
> - ports = self.dut.get_ports(self.nic)
> + ports = self.dut.get_ports()
>
> # Verify that enough ports are available
> self.verify(len(ports) >= 2, "Insufficient ports")
>
> - ports = self.dut.get_ports(self.nic)
> global valports
> valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
>
> diff --git a/tests/TestSuite_whitelist.py b/tests/TestSuite_whitelist.py
> index a32251d..aedae40 100644
> --- a/tests/TestSuite_whitelist.py
> +++ b/tests/TestSuite_whitelist.py
> @@ -55,7 +55,7 @@ class TestWhitelist(TestCase):
> self.frames_to_send = 1
>
> # Based on h/w type, choose how many ports to use
> - self.dutPorts = self.dut.get_ports(self.nic)
> + self.dutPorts = self.dut.get_ports()
>
> # Verify that enough ports are available
> self.verify(len(self.dutPorts) >= 1, "Insufficient ports")
Acked-by: Michael Qiu <michael.qiu@intel.com>
next prev parent reply other threads:[~2015-02-04 6:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-04 6:43 [dts] [PATCH v2 0/4] Support additional port configuration file Yong Liu
2015-02-04 6:43 ` [dts] [PATCH v2 1/4] framework: add new module for load " Yong Liu
2015-02-04 6:47 ` Qiu, Michael
2015-02-04 6:43 ` [dts] [PATCH v2 2/4] framework: execuction file support port config nic_type Yong Liu
2015-02-04 7:07 ` Qiu, Michael
2015-02-04 6:43 ` [dts] [PATCH v2 3/4] framework: reorganize DUT and Tester port initialize sequence Yong Liu
2015-02-04 6:59 ` Qiu, Michael
2015-02-04 6:43 ` [dts] [PATCH v2 4/4] suites: remove nic type check from testsuites Yong Liu
2015-02-04 6:50 ` Qiu, Michael [this message]
2015-02-05 1:32 ` [dts] [PATCH v2 0/4] Support additional port configuration file Liu, Yong
2015-02-05 2:18 ` [dts] [PATCH] framework: add port config pci bus id check suites: seperated checksum_offload function and performance port requirements Yong Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533710CFB86FA344BFBF2D6802E60286CD4628@SHSMSX101.ccr.corp.intel.com \
--to=michael.qiu@intel.com \
--cc=dts@dpdk.org \
--cc=yong.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).