From: "Liu, Yong" <yong.liu@intel.com>
To: haifeng <haifengx.tang@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH 1/2] add TestSuite_pmdpcap into dts
Date: Wed, 23 Sep 2015 10:29:35 +0800 [thread overview]
Message-ID: <56020E8F.5030908@intel.com> (raw)
In-Reply-To: <1442906614-89134-1-git-send-email-haifengx.tang@intel.com>
Haifeng,
Please add this case into default execution file.
On 09/22/2015 03:23 PM, haifeng wrote:
> Signed-off-by: haifeng <haifengx.tang@intel.com>
> ---
> tests/TestSuite_pmdpcap.py | 186 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 186 insertions(+)
> create mode 100644 tests/TestSuite_pmdpcap.py
>
> diff --git a/tests/TestSuite_pmdpcap.py b/tests/TestSuite_pmdpcap.py
> new file mode 100644
> index 0000000..41e2cfe
> --- /dev/null
> +++ b/tests/TestSuite_pmdpcap.py
> @@ -0,0 +1,186 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +'''
> +'''
> +from test_case import TestCase
> +import dts
> +
> +from time import sleep
> +from scapy.all import *
> +
> +
> +#
> +#
> +# Test class.
> +#
> +class TestPmdPcap(TestCase):
> +
> + pcap_file_sizes = [1000, 500]
> + dut_pcap_files_path = '/root/'
> +
> + def set_up_all(self):
> + self.check_scapy_in_dut()
> +
> + self.memory_channel = self.dut.get_memory_channels()
> +
> + # Enable PCAP features and rebuild the package
> + self.pcap_config = self.get_pcap_compile_config()
> + self.dut.send_expect(
> + "sed -i 's/CONFIG_RTE_LIBRTE_PMD_PCAP=n$/CONFIG_RTE_LIBRTE_PMD_PCAP=y/' config/%s" % self.pcap_config, "# ")
> + self.dut.build_install_dpdk(self.target)
> +
> + # make sure there is no interface to bind
> + # because if there is any interface bonded to igb_uio,
> + # it will result in packet transmiting failed
> + self.dut.restore_interfaces()
> +
> + def get_pcap_compile_config(self):
> + config_head = "common_"
> + os_type = self.dut.get_os_type()
> + if os_type == "linux":
> + config_tail = os_type + "app"
> + elif os_type == "freebsd":
> + config_tail = "bsdapp"
> + else:
> + raise Exception(
> + "Unknow os type, please check to make sure pcap can work in OS [ %s ]" % os_type)
> +
> + return config_head + config_tail
> +
> + def create_pcap_file(self, filename, number_of_packets):
> + flow = []
> + for pkt_id in range(number_of_packets):
> + pkt_id = str(hex(pkt_id % 256))
> + flow.append(Ether(src='00:00:00:00:00:%s' % pkt_id[2:], dst='00:00:00:00:00:00') / IP(
> + src='192.168.1.1', dst='192.168.1.2') / ("X" * 26))
> +
> + wrpcap(filename, flow)
> +
> + def check_scapy_in_dut(self):
> + try:
> + self.dut.send_expect('scapy', '>>> ')
> + self.dut.send_expect('quit()', '# ')
> + except:
> + self.verify(False, 'Scapy is required in dut.')
> +
> + def check_pcap_files(self, in_pcap, out_pcap, expected_frames):
> +
> + # Check if the number of expected frames are in the output
> + result = self.dut.send_expect(
> + 'tcpdump -n -e -r %s | wc -l' % out_pcap, '# ')
> + self.verify(str(expected_frames) in result,
> + 'Not all packets have been forwarded')
> +
> + # Check if the frames in the input and output files match
> + self.dut.send_expect('scapy', '>>> ')
> + self.dut.send_expect('input=rdpcap("%s")' % in_pcap, '>>> ')
> + self.dut.send_expect('output=rdpcap("%s")' % out_pcap, '>>> ')
> + self.dut.send_expect(
> + 'result=[input[i]==output[i] for i in xrange(len(input))]', '>>> ')
> + result = self.dut.send_expect('False in result', '>>> ')
> + self.dut.send_expect('quit()', '# ')
> +
> + self.verify('True' not in result, 'In/Out packets do not match.')
> +
> + def test_send_packets_with_one_device(self):
> + in_pcap = 'in_pmdpcap.pcap'
> + out_pcap = '/tmp/out_pmdpcap.pcap'
> +
> + two_cores = self.dut.get_core_list("1S/2C/1T")
> + core_mask = dts.create_mask(two_cores)
> +
> + self.create_pcap_file(in_pcap, TestPmdPcap.pcap_file_sizes[0])
> + self.dut.session.copy_file_to(in_pcap)
> +
> + command = ("./{}/app/testpmd -c {} -n {} " +
> + "--vdev=eth_pcap0,rx_pcap={},tx_pcap={} " +
> + "-- -i --port-topology=chained")
> +
> + self.dut.send_expect(command.format(self.target, core_mask,
> + self.memory_channel,
> + TestPmdPcap.dut_pcap_files_path + in_pcap,
> + out_pcap), 'testpmd> ', 15)
> +
> + self.dut.send_expect('start', 'testpmd> ')
> + sleep(2)
> + self.dut.send_expect('stop', 'testpmd> ')
> + self.dut.send_expect('quit', '# ')
> +
> + self.check_pcap_files(TestPmdPcap.dut_pcap_files_path + in_pcap,
> + out_pcap, TestPmdPcap.pcap_file_sizes[0])
> +
> + def test_send_packets_with_two_devices(self):
> +
> + in_pcap1 = 'in1_pmdpcap.pcap'
> + out_pcap1 = '/tmp/out1_pmdpcap.pcap'
> +
> + in_pcap2 = 'in2_pmdpcap.pcap'
> + out_pcap2 = '/tmp/out2_pmdpcap.pcap'
> +
> + four_cores = self.dut.get_core_list("1S/4C/1T")
> + core_mask = dts.create_mask(four_cores)
> +
> + self.create_pcap_file(in_pcap1, TestPmdPcap.pcap_file_sizes[0])
> + self.dut.session.copy_file_to(in_pcap1)
> + self.create_pcap_file(in_pcap2, TestPmdPcap.pcap_file_sizes[1])
> + self.dut.session.copy_file_to(in_pcap2)
> +
> + command = ("./{}/app/testpmd -c {} -n {} " +
> + "--vdev=eth_pcap0,rx_pcap={},tx_pcap={} " +
> + "--vdev=eth_pcap1,rx_pcap={},tx_pcap={} " +
> + "-- -i")
> +
> + self.dut.send_expect(command.format(self.target, core_mask,
> + self.memory_channel,
> + TestPmdPcap.dut_pcap_files_path +
> + in_pcap1,
> + out_pcap1,
> + TestPmdPcap.dut_pcap_files_path +
> + in_pcap2,
> + out_pcap2), 'testpmd> ', 10)
> +
> + self.dut.send_expect('start', 'testpmd> ')
> + sleep(2)
> + self.dut.send_expect('stop', 'testpmd> ')
> + self.dut.send_expect('quit', '# ')
> +
> + self.check_pcap_files(TestPmdPcap.dut_pcap_files_path + in_pcap1,
> + out_pcap2, TestPmdPcap.pcap_file_sizes[0])
> +
> + self.check_pcap_files(TestPmdPcap.dut_pcap_files_path + in_pcap2,
> + out_pcap1, TestPmdPcap.pcap_file_sizes[1])
> +
> + def tear_down_all(self):
> + # Disable PCAP feature and rebuild the package
> + self.dut.send_expect(
> + "sed -i 's/CONFIG_RTE_LIBRTE_PMD_PCAP=y$/CONFIG_RTE_LIBRTE_PMD_PCAP=n/' config/%s" % self.pcap_config, "# ")
> + self.dut.set_target(self.target)
next prev parent reply other threads:[~2015-09-23 2:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-22 7:23 haifeng
2015-09-22 7:23 ` [dts] [PATCH 2/2] add TestSuite_pmdpcap rst " haifeng
2015-09-23 2:29 ` Liu, Yong [this message]
2015-09-24 2:46 ` [dts] [PATCH 1/2] add TestSuite_pmdpcap " Tang, HaifengX
2015-09-24 2:46 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56020E8F.5030908@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=haifengx.tang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).