From: "Liu, Yong" <yong.liu@intel.com>
To: Lijuan Tu <lijuanx.a.tu@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH v3]tests multiprocess: fix commands send to wrong session
Date: Mon, 14 Dec 2015 09:04:17 +0800 [thread overview]
Message-ID: <566E1591.7010605@intel.com> (raw)
In-Reply-To: <1449817860-5868-1-git-send-email-lijuanx.a.tu@intel.com>
Applied. Thanks.
On 12/11/2015 03:11 PM, Lijuan Tu wrote:
> From: lijuan tu <lijuanx.a.tu@intel.com>
>
> create a new session to run secondary process
>
> Signed-off-by: lijuan tu <lijuanx.a.tu@intel.com>
> ---
> tests/TestSuite_multiprocess.py | 43 ++++++++++++++++++++---------------------
> 1 file changed, 21 insertions(+), 22 deletions(-)
>
> diff --git a/tests/TestSuite_multiprocess.py b/tests/TestSuite_multiprocess.py
> index 7bc005d..197bdb4 100644
> --- a/tests/TestSuite_multiprocess.py
> +++ b/tests/TestSuite_multiprocess.py
> @@ -69,6 +69,9 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> executions.append({'nprocs': 8, 'cores': '1S/4C/2T', 'pps': 0})
> self.dut.alt_session.send_expect("cd dpdk","# ",5)
>
> + # start new session to run secondary
> + self.session_secondary = self.dut.new_session()
> +
> def set_up(self):
> """
> Run before each test case.
> @@ -82,20 +85,20 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> # Send message from secondary to primary
> self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary" % self.target, "Finished Process Init", 100)
> time.sleep(20)
> - self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 100)
> + self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 100)
>
> - self.dut.alt_session.send_expect("send hello_primary", ">")
> + self.session_secondary.send_expect("send hello_primary", ">")
> out = self.dut.get_session_output()
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
> self.dut.send_expect("quit","# ")
> self.verify("Received 'hello_primary'" in out, "Message not received on primary process")
> # Send message from primary to secondary
> - self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary " % self.target, "Finished Process Init", 100)
> + self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary " % self.target, "Finished Process Init", 100)
> time.sleep(20)
> self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 100)
> - self.dut.alt_session.send_expect("send hello_secondary", ">")
> + self.session_secondary.send_expect("send hello_secondary", ">")
> out = self.dut.get_session_output()
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
> self.dut.send_expect("quit", "# ")
>
> self.verify("Received 'hello_secondary'" in out,
> @@ -106,10 +109,7 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> Load test of Simple MP application.
> """
>
> - self.dut.kill_all()
> - self.dut.send_expect("fg", "# ")
> -
> - self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary" % self.target, "Finished Process Init", 100)
> + self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=primary" % self.target, "Finished Process Init", 100)
> time.sleep(20)
> self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=secondary" % self.target, "Finished Process Init", 100)
> stringsSent = 0
> @@ -122,38 +122,36 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
>
> time.sleep(5)
> self.dut.send_expect("quit", "# ")
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
>
> def test_multiprocess_simple_mpapplicationstartup(self):
> """
> Test use of Auto for Application Startup.
> """
>
> - self.dut.kill_all()
> -
> # Send message from secondary to primary (auto process type)
> out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto " % self.target, "Finished Process Init", 100)
> self.verify("EAL: Auto-detected process type: PRIMARY" in out, "The type of process (PRIMARY) was not detected properly")
> time.sleep(20)
> - out = self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto" % self.target, "Finished Process Init", 100)
> + out = self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto" % self.target, "Finished Process Init", 100)
> self.verify("EAL: Auto-detected process type: SECONDARY" in out,
> "The type of process (SECONDARY) was not detected properly")
>
> - self.dut.alt_session.send_expect("send hello_primary", ">")
> + self.session_secondary.send_expect("send hello_primary", ">")
> out = self.dut.get_session_output()
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
> self.dut.send_expect("quit", "# ")
> self.verify("Received 'hello_primary'" in out, "Message not received on primary process")
>
> # Send message from primary to secondary (auto process type)
> - out = self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto" % self.target, "Finished Process Init", 100)
> + out = self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 --proc-type=auto" % self.target, "Finished Process Init", 100)
> self.verify("EAL: Auto-detected process type: PRIMARY" in out, "The type of process (PRIMARY) was not detected properly")
> time.sleep(20)
> out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C --proc-type=auto" % self.target, "Finished Process Init", 100)
> self.verify("EAL: Auto-detected process type: SECONDARY" in out, "The type of process (SECONDARY) was not detected properly")
> - self.dut.alt_session.send_expect("send hello_secondary", ">",100)
> + self.session_secondary.send_expect("send hello_secondary", ">",100)
> out = self.dut.get_session_output()
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
> self.dut.send_expect("quit", "# ")
>
> self.verify("Received 'hello_secondary'" in out,
> @@ -164,14 +162,13 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> Multiple processes without "--proc-type" flag.
> """
>
> - self.dut.kill_all()
> - self.dut.alt_session.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 -m 64" % self.target, "Finished Process Init", 100)
> + self.session_secondary.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c 3 -m 64" % self.target, "Finished Process Init", 100)
> out = self.dut.send_expect("./examples/multi_process/simple_mp/simple_mp/%s/simple_mp -n 1 -c C" % self.target, "# ", 100)
>
> self.verify("Is another primary process running" in out,
> "No other primary process detected")
>
> - self.dut.alt_session.send_expect("quit", "# ")
> + self.session_secondary.send_expect("quit", "# ")
>
> def test_perf_multiprocess_client_serverperformance(self):
> """
> @@ -251,6 +248,7 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> """
> Run after each test case.
> """
> + self.dut.kill_all()
> pass
>
> def tear_down_all(self):
> @@ -258,5 +256,6 @@ class TestMultiprocess(TestCase, IxiaPacketGenerator):
> Run after each test suite.
> """
> self.dut.kill_all()
> + self.dut.close_session(self.session_secondary)
>
> pass
next prev parent reply other threads:[~2015-12-14 1:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-11 7:11 Lijuan Tu
2015-12-14 1:04 ` Liu, Yong [this message]
2015-12-14 1:04 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=566E1591.7010605@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=lijuanx.a.tu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).