* [dts] [PATCH] br.py: change some BR nic config so that vlan could run correctly on this nic
@ 2016-04-13 9:43 Ding Heng
2016-04-15 6:52 ` Liu, Yong
0 siblings, 1 reply; 2+ messages in thread
From: Ding Heng @ 2016-04-13 9:43 UTC (permalink / raw)
To: dts; +Cc: Ding Heng
Signed-off-by: Ding Heng <hengx.ding@intel.com>
diff --git a/nics/br.py b/nics/br.py
index ae9f9a2..2e4aadd 100644
--- a/nics/br.py
+++ b/nics/br.py
@@ -46,13 +46,13 @@ FUNC_RULES = [
#redirect PEP0 to EPL0
'create acl 0',
'create acl-rule 0 0',
- 'add acl-rule condition 0 0 src-port 0',
+ 'add acl-rule condition 0 0 src-port 11',
'add acl-rule action 0 0 redirect 1',
'add acl-rule action 0 0 count',
#redirect PEP1 to EPL1
'create acl 1',
'create acl-rule 1 0',
- 'add acl-rule condition 1 0 src-port 11',
+ 'add acl-rule condition 1 0 src-port 0',
'add acl-rule action 1 0 redirect 5',
'add acl-rule action 1 0 count',
'apply acl',
@@ -214,31 +214,31 @@ class BoulderRapid(NetDevice):
def add_vlan(self, vlan_id=0):
self.ctrl_crb.send_expect("create vlan %d" % vlan_id, "<0>%")
if self.sec_port:
- self.ctrl_crb.send_expect("add vlan port %d 1,0" % vlan_id, "<0>%")
+ self.ctrl_crb.send_expect("add vlan port %d 5,0" % vlan_id, "<0>%")
else:
- self.ctrl_crb.send_expect("add vlan port %d 5,11" % vlan_id, "<0>%")
+ self.ctrl_crb.send_expect("add vlan port %d 1,11" % vlan_id, "<0>%")
def delete_vlan(self, vlan_id=0):
if self.sec_port:
- self.ctrl_crb.send_expect("del vlan port %d 1,0" % vlan_id, "<0>%")
+ self.ctrl_crb.send_expect("del vlan port %d 5,0" % vlan_id, "<0>%")
else:
- self.ctrl_crb.send_expect("del vlan port %d 5,11" % vlan_id, "<0>%")
+ self.ctrl_crb.send_expect("del vlan port %d 1,11" % vlan_id, "<0>%")
self.ctrl_crb.send_expect("del vlan %d" % vlan_id, "<0>%")
def add_txvlan(self, vlan_id=0):
if self.sec_port:
- self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
- else:
self.ctrl_crb.send_expect("set vlan tagging %d 5 tag" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
def delete_txvlan(self, vlan_id=0):
if self.sec_port:
- self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
- else:
self.ctrl_crb.send_expect("set vlan tagging %d 5 untag" % vlan_id, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
def enable_jumbo(self, framesize=0):
if self.sec_port:
- self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
- else:
self.ctrl_crb.send_expect("set port config 5 max_frame_size %d" % framesize, "<0>%")
+ else:
+ self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
--
1.9.3
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: [dts] [PATCH] br.py: change some BR nic config so that vlan could run correctly on this nic
2016-04-13 9:43 [dts] [PATCH] br.py: change some BR nic config so that vlan could run correctly on this nic Ding Heng
@ 2016-04-15 6:52 ` Liu, Yong
0 siblings, 0 replies; 2+ messages in thread
From: Liu, Yong @ 2016-04-15 6:52 UTC (permalink / raw)
To: Ding Heng, dts
Hi Heng,
There's no need to change those settings. Even BR pep sequence is the
same as pci port sequence, we can just adjust to it by our port
configurations.
Let's assume that the previous pci device is the second port for BR
device, and actually it is the second pep.
On 04/13/2016 05:43 PM, Ding Heng wrote:
> Signed-off-by: Ding Heng <hengx.ding@intel.com>
>
> diff --git a/nics/br.py b/nics/br.py
> index ae9f9a2..2e4aadd 100644
> --- a/nics/br.py
> +++ b/nics/br.py
> @@ -46,13 +46,13 @@ FUNC_RULES = [
> #redirect PEP0 to EPL0
> 'create acl 0',
> 'create acl-rule 0 0',
> - 'add acl-rule condition 0 0 src-port 0',
> + 'add acl-rule condition 0 0 src-port 11',
> 'add acl-rule action 0 0 redirect 1',
> 'add acl-rule action 0 0 count',
> #redirect PEP1 to EPL1
> 'create acl 1',
> 'create acl-rule 1 0',
> - 'add acl-rule condition 1 0 src-port 11',
> + 'add acl-rule condition 1 0 src-port 0',
> 'add acl-rule action 1 0 redirect 5',
> 'add acl-rule action 1 0 count',
> 'apply acl',
> @@ -214,31 +214,31 @@ class BoulderRapid(NetDevice):
> def add_vlan(self, vlan_id=0):
> self.ctrl_crb.send_expect("create vlan %d" % vlan_id, "<0>%")
> if self.sec_port:
> - self.ctrl_crb.send_expect("add vlan port %d 1,0" % vlan_id, "<0>%")
> + self.ctrl_crb.send_expect("add vlan port %d 5,0" % vlan_id, "<0>%")
> else:
> - self.ctrl_crb.send_expect("add vlan port %d 5,11" % vlan_id, "<0>%")
> + self.ctrl_crb.send_expect("add vlan port %d 1,11" % vlan_id, "<0>%")
>
> def delete_vlan(self, vlan_id=0):
> if self.sec_port:
> - self.ctrl_crb.send_expect("del vlan port %d 1,0" % vlan_id, "<0>%")
> + self.ctrl_crb.send_expect("del vlan port %d 5,0" % vlan_id, "<0>%")
> else:
> - self.ctrl_crb.send_expect("del vlan port %d 5,11" % vlan_id, "<0>%")
> + self.ctrl_crb.send_expect("del vlan port %d 1,11" % vlan_id, "<0>%")
> self.ctrl_crb.send_expect("del vlan %d" % vlan_id, "<0>%")
>
> def add_txvlan(self, vlan_id=0):
> if self.sec_port:
> - self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
> - else:
> self.ctrl_crb.send_expect("set vlan tagging %d 5 tag" % vlan_id, "<0>%")
> + else:
> + self.ctrl_crb.send_expect("set vlan tagging %d 1 tag" % vlan_id, "<0>%")
>
> def delete_txvlan(self, vlan_id=0):
> if self.sec_port:
> - self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
> - else:
> self.ctrl_crb.send_expect("set vlan tagging %d 5 untag" % vlan_id, "<0>%")
> + else:
> + self.ctrl_crb.send_expect("set vlan tagging %d 1 untag" % vlan_id, "<0>%")
>
> def enable_jumbo(self, framesize=0):
> if self.sec_port:
> - self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
> - else:
> self.ctrl_crb.send_expect("set port config 5 max_frame_size %d" % framesize, "<0>%")
> + else:
> + self.ctrl_crb.send_expect("set port config 1 max_frame_size %d" % framesize, "<0>%")
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-04-15 6:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-04-13 9:43 [dts] [PATCH] br.py: change some BR nic config so that vlan could run correctly on this nic Ding Heng
2016-04-15 6:52 ` Liu, Yong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).