From: "Liu, Yong" <yong.liu@intel.com>
To: "Chen, Zhaoyan" <zhaoyan.chen@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH v2] tests: Add l2fwd_crypto test plan and test suite
Date: Wed, 03 Aug 2016 09:26:01 +0800 [thread overview]
Message-ID: <57A14829.4060908@intel.com> (raw)
In-Reply-To: <1469688627-11232-1-git-send-email-zhaoyan.chen@intel.com>
Thanks, applied.
On 07/28/2016 02:50 PM, Chen, Zhaoyan wrote:
> From: "Chen, Zhaoyan" <zhaoyan.chen@intel.com>
>
> This suite will verify the cryptodev library via dpdk l2fwd, tests
> will cover all supported PMDs and Algorithms.
> ---
> test_plans/l2fwd_crypto_test_plan.rst | 462 ++++++++++++++++++++
> tests/TestSuite_l2fwd_crypto.py | 774 ++++++++++++++++++++++++++++++++++
> 2 files changed, 1236 insertions(+)
> create mode 100644 test_plans/l2fwd_crypto_test_plan.rst
> create mode 100644 tests/TestSuite_l2fwd_crypto.py
>
> diff --git a/test_plans/l2fwd_crypto_test_plan.rst b/test_plans/l2fwd_crypto_test_plan.rst
> new file mode 100644
> index 0000000..1492df7
> --- /dev/null
> +++ b/test_plans/l2fwd_crypto_test_plan.rst
> @@ -0,0 +1,462 @@
> +.. Copyright (c) 2010,2011 Intel Corporation
> + All rights reserved.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + - Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> +
> + - Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> +
> + - Neither the name of Intel Corporation nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> + COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> + STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> + OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +==============================================
> +Testing of CryptoDev in DPDK
> +==============================================
> +
> +
> +Description
> +===========
> +
> +This document provides the plan for testing CryptoDev API. CryptoDev API
> +provides the ability to do encryption/decryption by integrating QAT(Intel� QuickAssist
> +Technology) into DPDK. The QAT provides poll mode crypto driver support for
> +Intel� QuickAssist Adapter 8950 hardware accelerator.
> +
> +The testing of CrytpoDev API should be tested under either Intel QuickAssist Technology DH895xxC hardware
> +accelerator or AES-NI library.
> +
> +AES-NI algorithm table
> +The table below contains AES-NI Algorithms with CryptoDev API.
> +Part of the algorithms are not supported currently.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| AES | CBC | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| SHA | | SHA-1, SHA-224, SHA-384, SHA-256, SHA-512 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| HMAC | | Support SHA implementations SHA-1, SHA-224, SHA-256, SHA-384, SHA-512; |
> +| | | Key Size versus Block size support: Key Size must be <= block size; |
> +| | | Mac Len Supported SHA-1 10, 12, 16, 20 bytes; |
> +| | | Mac Len Supported SHA-256 16, 24, 32 bytes; |
> +| | | Mac Len Supported SHA-384 24,32, 40, 48 bytes; |
> +| | | Mac Len Supported SHA-512 32, 40, 48, 56, 64 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +
> +QAT algorithm table:
> +The table below contains Cryptographic Algorithm Validation with CryptoDev API.
> +Part of the algorithms are not supported currently.
> +
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +|Algorithm| Mode | Detail |
> +| | |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| AES | CBC | Encrypt/Decrypt;Key size: 128, 192, 256 bits |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| SHA | | SHA-1, SHA-224, SHA-256, SHA-512 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| HMAC | | Support SHA implementations SHA-1, SHA-224, SHA-256, SHA-512; |
> +| | | Key Size versus Block size support: Key Size must be <= block size; |
> +| | | Mac Len Supported SHA-1 10, 12, 16, 20 bytes; |
> +| | | Mac Len Supported SHA-224 14,16,20,24,28 bytes; |
> +| | | Mac Len Supported SHA-256 16, 24, 32 bytes; |
> +| | | Mac Len Supported SHA-384 24,32, 40, 48 bytes; |
> +| | | Mac Len Supported SHA-512 32, 40, 48, 56, 64 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| GCM | | Key Sizes:128, 192, 256 bits; |
> +| | | Associated Data Length: 0 ~ 240 bytes; |
> +| | | Payload Length: 0 ~ (2^32 -1) bytes; |
> +| | | IV source: external; |
> +| | | IV Lengths: 96 bits; |
> +| | | Tag Lengths: 8, 12, 16 bytes; |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| Snow3G | UEA2 | Encrypt/Decrypt; Key size: 128 |
> ++ +---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +| | UIA2 | Encrypt/Decrypt; Key size: 128 |
> ++---------+---------+---------+---------+----------+----------+----------+----------+----------+----------+
> +
> +Limitations
> +=============
> +* Chained mbufs are not supported.
> +* Hash only is not supported.
> +* Cipher only is not supported (except Snow3g).
> +* Only in-place is currently supported (destination address is the same as source address).
> +* Only supports the session-oriented API implementation by QAT. Support session-oriented and session-less APIs with AES-NI.
> +* Not performance tuned.
> +
> +Prerequisites
> +=============
> +To test CryptoDev API, an example l2fwd-crypto is added into DPDK.
> +
> +The test commands of l2fwd-crypto is below::
> + * ./examples/l2fwd-crypto/build/app/l2fwd-crypto -n 4 -c COREMASK -- -p PORTMASK -q NQ --cdev (AESNI_MB|QAT) --chain (HASH_CIPHER|CIPHER_HASH) --cipher_algo (ALGO) --cipher_op (ENCRYPT|DECRYPT) --cipher_key (key_value) --iv (key_value) --auth_algo (ALGO) --auth_op (GENERATE|VERIFY) --auth_key (key_value) --sessionless
> +
> +The operation of l2fwd-crypto are in 2 ways.
> +* For method CIPHER_HASH, the l2fwd-crypto will encrypt payload in packet first.
> +Then do authentification for the encrypted data.
> +* For method HASH_CIPHER, the l2fwd-crypto will authenticate payload in packet first.
> +Then do encryption for the encrypted data.
> +
> +To do the function test, scapy can be used as traffic generator.
> +To do the performance test, traffic generator can be hardware equipment or
> +software traffic generator.
> +
> +The CryptoDev API supports Fedora or FreeBSD.
> +
> +QAT/AES-NI installation
> +==========================
> +If CryptoDev needs to use QAT to do encryption/decryption, QAT should be installed
> +correctly. The steps how to install QAT is described in DPDK code directory
> +dpdk/doc/guides/cryptodevs/qat.rst.
> +
> +Once the driver is loaded, the software versions may be checked for each �dh89xxCC_devX� device as follows:
> + more /proc/icp_dh895xcc_dev0/version
> +
> + +--------------------------------------------------+
> + | Hardware and Software versions for device 0 |
> + +--------------------------------------------------+
> + |Hardware Version: A0 SKU4 |
> + |Firmware Version: 2.3.0 |
> + |MMP Version: 1.0.0 |
> + |Driver Version: 2.3.0 |
> + |Lowest Compatible Driver: 2.3 |
> + |QuickAssist API CY Version: 1.8 |
> + |QuickAssist API DC Version: 1.4 |
> + +--------------------------------------------------+
> +
> +If CryptoDev needs to use AES-NI to do encryption/decryption, AES-NI library should be install
> +correctly. The steps how to use AES-NI libary is described in DPDK code directory
> +dpdk/doc/guides/cryptodevs/aesni_mb.rst.
> +
> +Test case: Configuration test
> +====================================================
> +CryptoDev API supports different configuration.
> +This test tests different configuration with CrptoDev API.
> +
> +Test case: CrytoDev Unit test
> +====================================================
> +The CrytoDev API has Unit test cases to support basic API level testing.
> +
> +Compile Unit test
> + cd isg_cid-dpdk_org/app/test
> + make
> +
> +Sub-case: AES-NI test case
> +------------------------------------------------------
> +run ./test -c 0xf -n 2 -- -i
> +>>cryptodev_aesni_autotest
> +
> +
> +Sub-case: QAT test case
> +------------------------------------------------------
> +run ./test -c 0xf -n 2 -- -i
> +>>cryptodev_qat_autotest
> +
> +Test case: CryptoDev Function test
> +====================================================
> +For function test, the DUT forward UDP packets generated by scapy.
> +
> +After sending single packet from Scapy, Crytpodev function encrypt/decrypt the
> +payload in packet by using algorithm setting in command. The l2fwd-crypto
> +forward the packet back to tester.
> +Use TCPDump to capture the received packet on tester. Then tester parses the payload
> +and compare the payload with correct answer pre-stored in scripts.
> ++----------+ +----------+
> +| | | |
> +| | --------------> | |
> +| Tester | | DUT |
> +| | | |
> +| | <-------------> | |
> ++----------+ +----------+
> +
> +Sub-case: AES-NI test case
> +------------------------------------------------------
> +Cryptodev AES-NI algorithm validation matrix is showed in table below.
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | XCBC_MAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | AES_XCMC_MAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +
> +Sub-case: QAT AES test case
> +------------------------------------------------------
> +Cryptodev QAT AES algorithm validation matrix is showed in table below.
> +
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | XCBC_MAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | AES_XCMC_MAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +
> +Sub-case: QAT GCM test case
> +------------------------------------------------------
> +Cryptodev GCM algorithm validation matrix is showed in table below.
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | XCBC_MAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | AES_XCMC_MAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +
> +Sub-case: AES-NI GCM test case
> +------------------------------------------------------
> +Cryptodev GCM algorithm validation matrix is showed in table below.
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_GCM | ENCRYPT | 128 | XCBC_MAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | AES_XCMC_MAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_GCM | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +
> +
> +Sub-case: QAT Snow3G test case
> +------------------------------------------------------
> +Cryptodev Snow3G algorithm validation matrix is showed in table below.
> +Cipher only, hash-only and chaining functionality is supported for Snow3g.
> ++-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key |
> ++-------------+-------------+-------------+-------------+
> +| CIPHER | ECB | ENCRYPT | 128 |
> ++-------------+-------------+-------------+-------------+
> +
> +
> +Test case: CryptoDev performance test
> +=======================================
> +For performance test, the DUT forward UDP packets generated by traffic generator.
> +Also, queue and core number should be set into maximun number.
> ++----------+ +----------+
> +| | | |
> +| | --------------> | |
> +| IXIA | | DUT |
> +| | | |
> +| | <-------------> | |
> ++----------+ +----------+
> +
> +CryptoDev performance should be measured from different aspects ad below.
> ++-------+---------+---------+---------+----------+----------+
> +| Frame | 1S/1C/1T| 1S/1C/1T| 1S/2C/1T| 1S/2C/2T | 1S/2C/2T |
> +| Size | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 64 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 65 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 128 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 256 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 512 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 1024 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 1280 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +| 1518 | | | | | |
> ++-------+---------+---------+---------+----------+----------+
> +
> +Sub-case: AES-NI test case
> +------------------------------------------------------
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +
> +Sub-case: QAT AES test case
> +------------------------------------------------------
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| Method | Cipher_algo | Cipher_op | Cipyer_key | Auth_algo | Auth_op |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| CIPHER_HASH | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | MD5_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 192 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 256 | SHA1_HMAC | GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA224_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA256_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA384_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> +| HASH_CIPHER | AES_CBC | ENCRYPT | 128 | SHA512_HMAC| GENERATE |
> ++-------------+-------------+-------------+-------------+-------------+-------------+
> diff --git a/tests/TestSuite_l2fwd_crypto.py b/tests/TestSuite_l2fwd_crypto.py
> new file mode 100644
> index 0000000..0d6a52a
> --- /dev/null
> +++ b/tests/TestSuite_l2fwd_crypto.py
> @@ -0,0 +1,774 @@
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +import dts
> +import time
> +
> +from test_case import TestCase
> +
> +
> +class TestL2fwdCrypto(TestCase):
> +
> + def set_up_all(self):
> +
> + self.core_config = "1S/4C/1T"
> + self.number_of_ports = 2
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= self.number_of_ports,
> + "Not enough ports for " + self.nic)
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> +
> + self.logger.info("core config = " + self.core_config)
> + self.logger.info("number of ports = " + str(self.number_of_ports))
> + self.logger.info("dut ports = " + str(self.dut_ports))
> + self.logger.info("ports_socket = " + str(self.ports_socket))
> +
> + self.core_mask = dts.create_mask(self.dut.get_core_list(
> + self.core_config,
> + socket=self.ports_socket))
> + self.port_mask = dts.create_mask([self.dut_ports[0],
> + self.dut_ports[1]])
> +
> + self.tx_port = self.tester.get_local_port(self.dut_ports[0])
> + self.rx_port = self.tester.get_local_port(self.dut_ports[1])
> +
> + self.tx_interface = self.tester.get_interface(self.tx_port)
> + self.rx_interface = self.tester.get_interface(self.rx_port)
> +
> + self.logger.info("core mask = " + self.core_mask)
> + self.logger.info("port mask = " + self.port_mask)
> + self.logger.info("tx interface = " + self.tx_interface)
> + self.logger.info("rx interface = " + self.rx_interface)
> +
> + # Rebuild the dpdk with cryptodev pmds
> + self.dut.send_expect("export AESNI_MULTI_BUFFER_LIB_PATH=/root/ipsec_043/code/", "#")
> + self.dut.send_expect("export LIBSSO_SNOW3G_PATH=/root/libsso_snow3g/snow3g/", "#")
> + self.dut.send_expect("export LIBSSO_KASUMI_PATH=/root/LibSSO_0_3_1/isg_cid-wireless_libs/ciphers/kasumi/", "#")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=n$/CONFIG_RTE_LIBRTE_PMD_QAT=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=n$/CONFIG_RTE_LIBRTE_PMD_KASUMI=y/' config/common_base", "# ")
> + self.dut.build_install_dpdk(self.dut.target)
> +
> + # l2fwd-crypto compile
> + out = self.dut.build_dpdk_apps("./examples/l2fwd-crypto")
> + self.verify("Error" not in out, "Compilation error")
> + self.verify("No such" not in out, "Compilation error")
> +
> + # Bind QAT VF devices
> + out = self.dut.send_expect("lspci -d:443|awk '{print $1}'", "# ", 10)
> + self.dut.send_expect('echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id', "# ", 10)
> + for line in out.replace("\r", "\n").replace("\n\n", "\n").split("\n"):
> + cmd = "echo 0000:{} > /sys/bus/pci/devices/0000\:{}/driver/unbind".format(line, line.replace(":", "\:"))
> + self.dut.send_expect(cmd, "# ", 10)
> + cmd = "echo 0000:{} > /sys/bus/pci/drivers/igb_uio/bind".format(line)
> + self.dut.send_expect(cmd, "# ", 10)
> +
> + def set_up(self):
> + pass
> +
> + def test_qat_AES(self):
> +
> + result = True
> +
> + self.logger.info("Test qat_c_AES_CBC_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_c_AES_CBC_01"):
> + result = False
> +
> + self.logger.info("Test qat_c_AES_CTR_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_c_AES_CTR_01"):
> + result = False
> +
> + self.logger.info("Test qat_c_AES_GCM_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_c_AES_GCM_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_qat_SHA(self):
> +
> + result = True
> +
> + self.logger.info("Test qat_h_SHA1_HMAC_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_h_SHA1_HMAC_01"):
> + result = False
> +
> + self.logger.info("Test qat_h_SHA256_HMAC_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_h_SHA256_HMAC_01"):
> + result = False
> +
> + self.logger.info("Test qat_h_SHA512_HMAC_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_h_SHA512_HMAC_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_qat_AES_XCBC_MAC(self):
> +
> + result = True
> +
> + self.logger.info("Test qat_h_AES_XCBC_MAC_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_h_AES_XCBC_MAC_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_qat_SNOW3G(self):
> +
> + result = True
> +
> + self.logger.info("Test qat_c_UEA2_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_c_UEA2_01"):
> + result = False
> +
> + self.logger.info("Test qat_h_UIA2_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_h_UIA2_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_qat_AES_GCM_AES_GCM(self):
> +
> + result = True
> +
> + self.logger.info("Test qat_ch_AES_GCM_AES_GCM_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "qat_ch_AES_GCM_AES_GCM_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_aesni_AES_GCM_AES_GCM(self):
> +
> + result = True
> +
> + self.logger.info("Test aesni_ch_AES_GCM_AES_GCM_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "aesni_ch_AES_GCM_AES_GCM_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_kasumi_KASUMI(self):
> +
> + result = True
> +
> + self.logger.info("Test kasumi_c_F8_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "kasumi_c_F8_01"):
> + result = False
> +
> + self.logger.info("Test kasumi_h_F9_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "kasumi_h_F9_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_null_NULL(self):
> +
> + result = True
> +
> + self.logger.info("Test null_c_NULL_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "null_c_NULL_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def test_snow3g_SNOW3G(self):
> +
> + result = True
> +
> + self.logger.info("Test snow3g_c_UEA2_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "snow3g_c_UEA2_01"):
> + result = False
> +
> + self.logger.info("Test snow3g_h_UIA2_01")
> + if not self.__execute_l2fwd_crypto_test(
> + test_vectors, "snow3g_h_UIA2_01"):
> + result = False
> +
> + self.verify(result, True)
> +
> + def __execute_l2fwd_crypto_test(self, test_vectors, test_vector_name):
> +
> + if test_vector_name not in test_vectors:
> + self.logger.warn("SKIP : " + test_vector_name)
> + return True
> +
> + test_vector = test_vectors[test_vector_name]
> +
> + result = True
> + cmd_str = self.__test_vector_to_cmd(test_vector,
> + core_mask=self.core_mask,
> + port_mask=self.port_mask)
> +
> + self.dut.send_expect(cmd_str, "==", 30)
> +
> + self.tester.send_expect("rm -rf %s.pcap" % (self.rx_interface), "#")
> + self.tester.send_expect("tcpdump -w %s.pcap -i %s &" % (self.rx_interface, self.rx_interface), "#")
> + # Wait 5 sec for tcpdump stable
> + time.sleep(5)
> +
> + payload = self.__format_hex_to_param(test_vector["input"], "\\x", "\\x")
> +
> + PACKET_COUNT = 65
> +
> + self.tester.scapy_foreground()
> + self.tester.scapy_append('sendp([Ether(src="52:00:00:00:00:00")/IP(src="192.168.1.1",dst="192.168.1.2")/Raw(load=\"%s\")], iface="%s", count=%s)' % (payload, self.tx_interface, PACKET_COUNT))
> +
> + self.tester.scapy_execute()
> +
> + time.sleep(5)
> +
> + self.tester.send_expect("killall tcpdump", "#")
> + self.tester.send_expect("^C", "#")
> +
> + # Wait 5 secs for tcpdump exit
> + time.sleep(5)
> +
> + self.tester.send_expect("scapy", ">>>")
> + self.tester.send_expect("p=rdpcap('%s.pcap', count=%s)" % (self.rx_interface, PACKET_COUNT), ">>>")
> +
> + hex_list = []
> + for i in range(PACKET_COUNT):
> + cmd = "linehexdump(p[%s],onlyhex=1)" % i
> + hex_list.append(self.tester.send_expect(cmd, ">>>"))
> +
> + # Exit the scapy
> + self.tester.send_expect("exit()", "#", 60)
> +
> + for hex_str in hex_list:
> + packet_hex = hex_str.split(" ")
> + # self.logger.info(hex_str)
> + # self.logger.info(packet_hex)
> +
> + cipher_offset = 34
> + cipher_length = len(test_vector["output_cipher"])/2
> + if cipher_length == 0:
> + cipher_length = len(test_vector["input"])/2
> + cipher_text = "".join(packet_hex[cipher_offset:cipher_offset+cipher_length])
> + # self.logger.info("Cipher text in packet = " + cipher_text)
> + # self.logger.info("Ref Cipher text = " + test_vector["output_cipher"])
> + if str.lower(cipher_text) == str.lower(test_vector["output_cipher"]):
> + self.logger.info("Cipher Matched.")
> + else:
> + if test_vector["output_cipher"] != "":
> + result = False
> + self.logger.info("Cipher NOT Matched.")
> + self.logger.info("Cipher text in packet = " + cipher_text)
> + self.logger.info("Ref Cipher text = " + test_vector["output_cipher"])
> + else:
> + self.logger.info("Skip Cipher, Since no cipher text set")
> +
> + hash_offset = cipher_offset + cipher_length
> + hash_length = len(test_vector["output_hash"])/2
> + if hash_length != 0:
> + hash_text = "".join(packet_hex[hash_offset:hash_offset+hash_length])
> + # self.logger.info("Hash text in packet = " + hash_text)
> + # self.logger.info("Ref Hash text = " + test_vector["output_hash"])
> + if str.lower(hash_text) == str.lower(test_vector["output_hash"]):
> + self.logger.info("Hash Matched")
> + else:
> + result = False
> + self.logger.info("Hash NOT Matched")
> + self.logger.info("Hash text in packet = " + hash_text)
> + self.logger.info("Ref Hash text = " + test_vector["output_hash"])
> + else:
> + self.logger.info("Skip Hash, Since no hash text set")
> +
> + # Close l2fwd-crypto
> + # self.dut.send_expect("killall -9 l2fwd-crypto", "# ", 15)
> + self.dut.send_expect("^C", "# ", 15)
> +
> + if result:
> + self.logger.info("PASSED")
> + else:
> + self.logger.info("FAILED")
> +
> + return result
> +
> + def tear_down(self):
> + pass
> +
> + def tear_down_all(self):
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_QAT=y$/CONFIG_RTE_LIBRTE_PMD_QAT=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=y$/CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y$/CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_SNOW3G=y$/CONFIG_RTE_LIBRTE_PMD_SNOW3G=n/' config/common_base", "# ")
> + self.dut.send_expect("sed -i 's/CONFIG_RTE_LIBRTE_PMD_KASUMI=y$/CONFIG_RTE_LIBRTE_PMD_KASUMI=n/' config/common_base", "# ")
> +
> + def __test_vector_to_cmd(self, test_vector, core_mask="", port_mask=""):
> + L2FWD_CRYPTO_APP = "./examples/l2fwd-crypto/build/app/l2fwd-crypto"
> + EAL_CORE_MASK = " -cf" if core_mask == "" else " -c" + core_mask
> + EAL_MM_CHANNEL = " -n4"
> + EAL_SEP = " --"
> + PORT_MASK = "" if port_mask == "" else " -p" + port_mask
> + QUEUE_NUM = ""
> +
> + vdev = ""
> + if self.__check_field_in_vector(test_vector, "vdev"):
> + vdev = " --vdev " + test_vector["vdev"]
> +
> + chain = ""
> + if self.__check_field_in_vector(test_vector, "chain"):
> + chain = " --chain " + test_vector["chain"]
> +
> + cdev_type = ""
> + if self.__check_field_in_vector(test_vector, "cdev_type"):
> + cdev_type = " --cdev_type " + test_vector["cdev_type"]
> +
> + cipher_algo = ""
> + if self.__check_field_in_vector(test_vector, "cipher_algo"):
> + cipher_algo = " --cipher_algo " + test_vector["cipher_algo"]
> +
> + cipher_op = ""
> + if self.__check_field_in_vector(test_vector, "cipher_op"):
> + cipher_op = " --cipher_op " + test_vector["cipher_op"]
> +
> + cipher_key = ""
> + if self.__check_field_in_vector(test_vector, "cipher_key"):
> + cipher_key = " --cipher_key " + self.__format_hex_to_param(test_vector["cipher_key"])
> +
> + iv = ""
> + if self.__check_field_in_vector(test_vector, "iv"):
> + iv = " --iv " + self.__format_hex_to_param(test_vector["iv"])
> +
> + auth_algo = ""
> + if self.__check_field_in_vector(test_vector, "auth_algo"):
> + auth_algo = " --auth_algo " + test_vector["auth_algo"]
> +
> + auth_op = ""
> + if self.__check_field_in_vector(test_vector, "auth_op"):
> + auth_op = " --auth_op " + test_vector["auth_op"]
> +
> + auth_key = ""
> + if self.__check_field_in_vector(test_vector, "auth_key"):
> + auth_key = " --auth_key " + self.__format_hex_to_param(test_vector["auth_key"])
> +
> + auth_key_random_size = ""
> + if self.__check_field_in_vector(test_vector, "auth_key_random_size"):
> + auth_key_random_size = " --auth_key_random_size " + test_vector["auth_key_random_size"]
> +
> + aad = ""
> + if self.__check_field_in_vector(test_vector, "aad"):
> + aad = " --aad " + self.__format_hex_to_param(test_vector["aad"])
> +
> + aad_random_size = ""
> + if self.__check_field_in_vector(test_vector, "aad_random_size"):
> + aad_random_size = " --aad_random_size " + test_vector["aad_random_size"]
> +
> + cmd_str = "".join([L2FWD_CRYPTO_APP, EAL_CORE_MASK, EAL_MM_CHANNEL, vdev, vdev, EAL_SEP,
> + PORT_MASK, QUEUE_NUM, chain, cdev_type, cipher_algo, cipher_op, cipher_key,
> + iv, auth_algo, auth_op, auth_key, auth_key_random_size, aad, aad_random_size])
> +
> + return cmd_str
> +
> + def __check_field_in_vector(self, test_vector, field_name):
> + if field_name in test_vector and test_vector[field_name]:
> + return True
> + return False
> +
> + def __format_hex_to_param(self, hex_str, sep=":", prefix=""):
> + if not hex_str:
> + return ""
> + if len(hex_str) == 1:
> + return prefix + "0" + hex_str
> +
> + result = prefix + hex_str[0:2]
> + for i in range(2, len(hex_str), 2):
> + if len(hex_str) < i + 2:
> + result = result + sep + "0" + hex_str[i:]
> + else:
> + result = result + sep + hex_str[i:i+2]
> +
> + return result
> +
> +test_vectors = {
> +
> + "qat_c_AES_CBC_01": {
> + "vdev": "",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_CBC",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "96A702D1CC8DD6D625D971915FCE8C40B8C522042B7126D51BB204CECA048C13793B75FF84A4B524370A45534C2BC476",
> + "output_hash": "",
> + },
> +
> + "qat_c_AES_CTR_01": {
> + "vdev": "",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_CTR",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "1B851AA4507FE154E0D28549D742FB4B1372FD85770963878BCBEC1E5AB51ECD0B3C85A2000DB4E9ACD3D95CDD38FD56",
> + "output_hash": "",
> + },
> +
> + "qat_c_AES_GCM_01": {
> + "vdev": "",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_GCM",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "1b851aa4507fe154e0d28549d742fb4b1372fd85770963878bcbec1e5ab51ecd0b3c85a2000db4e9acd3d95cdd38fd56",
> + "output_hash": "",
> + },
> +
> + "qat_h_SHA1_HMAC_01": {
> + "vdev": "",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "SHA1_HMAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111100000000000000000000000000000000",
> + "output_cipher": "",
> + "output_hash": "12E2EF8B7EBFE556C73307B04E1E46D12BA34884"
> + },
> +
> + "qat_h_SHA256_HMAC_01": {
> + "vdev": "",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "SHA256_HMAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111100000000000000000000000000000000",
> + "output_cipher": "",
> + "output_hash": "AC9E0BA3A0716F4F4A2734B407BE28D6F276CE0472B827D6EE47B7E518C2BC0D"
> + },
> +
> + "qat_h_SHA512_HMAC_01": {
> + "vdev": "",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "SHA512_HMAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111110000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
> + "output_cipher": "",
> + "output_hash": "C8917E7490FC2CFF0CFDD0509C1C0D711CD27FFDFAAEA375E123F25F7532D4FA7D02D95CD52FAC8A27E21B3F5F734241897A37BB8953C52FFADB3B605A864569"
> + },
> +
> + "qat_h_AES_XCBC_MAC_01": {
> + "vdev": "",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "AES_XCBC_MAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "",
> + "output_hash": "A7AD120ED744A9EC0618C0D9"
> + },
> +
> + "qat_ch_AES_CBC_SHA1_HMAC_01": {
> + "vdev": "",
> + "chain": "CIPHER_HASH",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_CBC",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "SHA1_HMAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "96A702D1CC8DD6D625D971915FCE8C40B8C522042B7126D51BB204CECA048C13793B75FF84A4B524370A45534C2BC476",
> + "output_hash": "2D6EFD5929812460E2DE34A1BD768F209C985143BA7333E8D59EFED291517EF7"
> + },
> +
> + "qat_c_UEA2_01": {
> + "vdev": "",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "SNOW3G_UEA2",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "fa0d2ff5dbf973e7082b128396fbc2c1ff5721099a1eb82918e66c1fa1b8fd52ce1763963f73859595d89b0b8d3907a8",
> + "output_hash": ""
> + },
> +
> + "qat_h_UIA2_01": {
> + "vdev": "",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "SNOW3G_UIA2",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "000102030405060708090a0b0c0d0e0f",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "",
> + "output_hash": "741D4316"
> + },
> +
> + "snow3g_c_UEA2_01": {
> + "vdev": "cryptodev_snow3g_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "SNOW3G_UEA2",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "fa0d2ff5dbf973e7082b128396fbc2c1ff5721099a1eb82918e66c1fa1b8fd52ce1763963f73859595d89b0b8d3907a8",
> + "output_hash": ""
> + },
> +
> + "snow3g_h_UIA2_01": {
> + "vdev": "cryptodev_snow3g_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "SNOW3G_UIA2",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "000102030405060708090a0b0c0d0e0f",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "",
> + "output_hash": "741D4316"
> + },
> +
> + "kasumi_c_F8_01": {
> + "vdev": "cryptodev_kasumi_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "KASUMI_F8",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "0001020304050607",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "ede654ff0caab546b654cd7a3b0a4199e957579214f45bd7e25fcbbda41e38fc885fbbd6195cf8e22905480191b2f861",
> + "output_hash": ""
> + },
> +
> + "kasumi_h_F9_01": {
> + "vdev": "cryptodev_kasumi_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "HASH_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "",
> + "cipher_op": "",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "KASUMI_F9",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + # aad length min=8 max=8
> + "aad": "0001020304050607",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "",
> + "output_hash": "D1C2BE1E"
> + },
> +
> + "null_c_NULL_01": {
> + "vdev": "cryptodev_null_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "CIPHER_ONLY",
> + "cdev_type": "ANY",
> + "cipher_algo": "NULL",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "",
> + "iv": "",
> + "auth_algo": "",
> + "auth_op": "",
> + "auth_key": "",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_hash": ""
> + },
> +
> + "qat_ch_AES_GCM_AES_GCM_01": {
> + "vdev": "",
> + "chain": "CIPHER_HASH",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_GCM",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "AES_GCM",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + # aad length min=8 max=12
> + "aad": "0001020304050607",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "1372fd85770963878bcbec1e5ab51ecd0b3c85a2000db4e9acd3d95cdd38fd565c1abac3884e8e167332357956a4c21f",
> + "output_hash": "00A2EBC33A8A1C8C"
> + },
> +
> + "aesni_ch_AES_GCM_AES_GCM_01": {
> + "vdev": "cryptodev_aesni_gcm_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "CIPHER_HASH",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_GCM",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "AES_GCM",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + # aad length min=8 max=12
> + "aad": "0001020304050607",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "1372fd85770963878bcbec1e5ab51ecd0b3c85a2000db4e9acd3d95cdd38fd565c1abac3884e8e167332357956a4c21f",
> + "output_hash": "00A2EBC33A8A1C8C"
> + },
> +
> + "aesni_ch_AES_CBC_SHA1_HMAC_01": {
> + "vdev": "cryptodev_aesni_mb_pmd,socket_id=1,max_nb_sessions=128",
> + "chain": "CIPHER_HASH",
> + "cdev_type": "ANY",
> + "cipher_algo": "AES_CBC",
> + "cipher_op": "ENCRYPT",
> + "cipher_key": "000102030405060708090a0b0c0d0e0f",
> + "iv": "000102030405060708090a0b0c0d0e0f",
> + "auth_algo": "SHA1_HMAC",
> + "auth_op": "GENERATE",
> + "auth_key": "000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f000102030405060708090a0b0c0d0e0f",
> + "auth_key_random_size": "",
> + "aad": "",
> + "aad_random_size": "",
> + "input": "111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111",
> + "output_cipher": "96A702D1CC8DD6D625D971915FCE8C40B8C522042B7126D51BB204CECA048C13793B75FF84A4B524370A45534C2BC476",
> + "output_hash": "2D6EFD5929812460E2DE34A1BD768F209C985143BA7333E8D59EFED291517EF7"
> + },
> +
> +}
prev parent reply other threads:[~2016-08-03 1:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-28 6:50 Chen, Zhaoyan
2016-08-03 1:26 ` Liu, Yong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57A14829.4060908@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=zhaoyan.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).