From: "Liu, Yong" <yong.liu@intel.com>
To: "xu,gang" <gangx.xu@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH V1 01/2] add keep alive test code
Date: Thu, 25 Aug 2016 13:38:45 +0800 [thread overview]
Message-ID: <57BE8465.5040307@intel.com> (raw)
In-Reply-To: <1471944392-26112-1-git-send-email-gangx.xu@intel.com>
Thanks gang, applied.
On 08/23/2016 05:26 PM, xu,gang wrote:
> Signed-off-by: xu,gang <gangx.xu@intel.com>
> ---
> tests/TestSuite_keep_alive.py | 114 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 114 insertions(+)
> create mode 100644 tests/TestSuite_keep_alive.py
>
> diff --git a/tests/TestSuite_keep_alive.py b/tests/TestSuite_keep_alive.py
> new file mode 100644
> index 0000000..2ed14f8
> --- /dev/null
> +++ b/tests/TestSuite_keep_alive.py
> @@ -0,0 +1,114 @@
> +#BSD LICENSE
> +#
> +# Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Test keep alive
> +"""
> +
> +import dts
> +import string
> +import time
> +import re
> +from test_case import TestCase
> +from plotting import Plotting
> +from settings import HEADER_SIZE
> +from etgen import IxiaPacketGenerator
> +from packet import Packet, sniff_packets, load_sniff_packets
> +
> +class TestKeepAlive(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> +
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
> + cores = self.dut.get_core_list("1S/4C/1T")
> + self.coremask = dts.create_mask(cores)
> +
> + self.path = "./examples/l2fwd-keepalive/build/l2fwd-keepalive"
> +
> + # build sample app
> + out = self.dut.build_dpdk_apps("./examples/l2fwd-keepalive")
> + self.verify("Error" not in out, "compilation error 1")
> + self.verify("No such file" not in out, "compilation error 2")
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def test_keep_alive(self):
> + """
> + Verify netmap compatibility with one port
> + """
> + cmd = self.path + " -c f -n 4 -- -q 8 -p ffff -K 10"
> +
> + self.dut.send_expect(cmd,"Port statistics",60)
> +
> + self.scapy_send_packet(2000)
> + out = self.dut.get_session_output(timeout=10)
> + print out
> + p = re.compile(r'\d+')
> + result = p.findall(out)
> + amount = 2000 * len(self.dut_ports)
> + self.verify(str(amount) in result, "Wrong: can't get <%s> package")
> +
> + def scapy_send_packet(self,nu):
> + """
> + Send a packet to port
> + """
> + for i in range(len(self.dut_ports)):
> + txport = self.tester.get_local_port(self.dut_ports[i])
> + mac = self.dut.get_mac_address(self.dut_ports[i])
> + txItf = self.tester.get_interface(txport)
> + self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)], iface="%s",count=%s)' % (mac,txItf,nu))
> + self.tester.scapy_execute()
> +
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> + pass
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
prev parent reply other threads:[~2016-08-25 5:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-23 9:26 xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 02/2] add keep alive test plan xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 01/2] add ip_pipeline cfg test code xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 02/2] add ip_pipeline cfg test plan xu,gang
2016-08-25 5:44 ` Liu, Yong
2016-08-23 9:26 ` [dts] [PATCH V1 01/2] add ip_pipeline_cpu_utilization test code xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 02/2] add ip_pipeline cpu utilization test plan xu,gang
2016-08-25 5:46 ` Liu, Yong
2016-08-23 9:26 ` [dts] [PATCH V1 01/2] add ip_pipeline link_identification test code xu,gang
2016-08-25 5:50 ` Liu, Yong
2016-08-23 9:26 ` [dts] [PATCH V1 02/2] add ip_pipeline link_identification test plan xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 01/2] add ip_pipeline parser_cleanup test code xu,gang
2016-08-23 9:26 ` [dts] [PATCH V1 2/2] add ip_pipeline parser_cleanup test plan xu,gang
2016-08-25 2:41 ` Liu, Yong
2016-08-23 9:26 ` [dts] [PATCH V1 1/2] add ip_pipeline source_sink test code xu,gang
2016-08-25 2:36 ` Liu, Yong
2016-08-23 9:26 ` [dts] [PATCH V1 2/2] add ip_pipeline source_sink test plan xu,gang
2016-08-25 5:38 ` Liu, Yong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57BE8465.5040307@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=gangx.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).