From: "Liu, Yong" <yong.liu@intel.com>
To: "xu,huilong" <huilongx.xu@intel.com>, dts@dpdk.org
Subject: Re: [dts] [PATCH V1] remove ivshmem test suite
Date: Thu, 08 Sep 2016 14:49:10 +0800 [thread overview]
Message-ID: <57D109E6.107@intel.com> (raw)
In-Reply-To: <1473299903-7024-1-git-send-email-huilongx.xu@intel.com>
Hi Huilong, failed to apply it for wrong format. Please resend it.
On 09/08/2016 09:58 AM, xu,huilong wrote:
> dpdk not support ivshmem target already
>
> Signed-off-by: xu,huilong <huilongx.xu@intel.com>
> ---
> executions/execution_smoke.cfg | 1 -
> test_plans/unit_tests_ivshmem_test_plan.rst | 54 -----------------
> tests/TestSuite_unit_tests_ivshmem.py | 93 -----------------------------
> 3 files changed, 148 deletions(-)
> delete mode 100644 test_plans/unit_tests_ivshmem_test_plan.rst
> delete mode 100644 tests/TestSuite_unit_tests_ivshmem.py
>
> diff --git a/executions/execution_smoke.cfg b/executions/execution_smoke.cfg
> index 5012599..9e5d2e6 100644
> --- a/executions/execution_smoke.cfg
> +++ b/executions/execution_smoke.cfg
> @@ -5,7 +5,6 @@ test_suites=
> unit_tests_cmdline,
> unit_tests_eal,
> unit_tests_dump,
> - unit_tests_ivshmem,
> unit_tests_kni,
> unit_tests_lpm,
> unit_tests_mbuf,
> diff --git a/test_plans/unit_tests_ivshmem_test_plan.rst b/test_plans/unit_tests_ivshmem_test_plan.rst
> deleted file mode 100644
> index b393b19..0000000
> --- a/test_plans/unit_tests_ivshmem_test_plan.rst
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -.. Copyright (c) <2014>, Intel Corporation
> - All rights reserved.
> -
> - Redistribution and use in source and binary forms, with or without
> - modification, are permitted provided that the following conditions
> - are met:
> -
> - - Redistributions of source code must retain the above copyright
> - notice, this list of conditions and the following disclaimer.
> -
> - - Redistributions in binary form must reproduce the above copyright
> - notice, this list of conditions and the following disclaimer in
> - the documentation and/or other materials provided with the
> - distribution.
> -
> - - Neither the name of Intel Corporation nor the names of its
> - contributors may be used to endorse or promote products derived
> - from this software without specific prior written permission.
> -
> - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> - FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> - COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> - INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
> - (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
> - SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> - HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> - STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
> - ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
> - OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -================
> -Ivshmem Autotest
> -================
> -
> -This is the test plan for the Intel® DPDK Inter-VM shared memory feature.
> -
> -This section explains how to run the unit tests for ivshmem. The test can be
> -launched independently using the command line interface.
> -This test is implemented as a ivshmem linuxapp environment application.
> -
> -The complete test suite is launched automatically using a python-expect
> -script (launched using ``make test``) that sends commands to
> -the application and checks the results. A test report is displayed on
> -stdout.
> -
> -The steps to run the unit test manually are as follow::
> -
> - # make -C ./app/test/
> - # ./app/test/test -n 1 -c ffff
> - RTE>> ivshmem_autotest
> -
> -The final output of the test has to be "Test OK"
> \ No newline at end of file
> diff --git a/tests/TestSuite_unit_tests_ivshmem.py b/tests/TestSuite_unit_tests_ivshmem.py
> deleted file mode 100644
> index 31e8902..0000000
> --- a/tests/TestSuite_unit_tests_ivshmem.py
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -# BSD LICENSE
> -#
> -# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> -# All rights reserved.
> -#
> -# Redistribution and use in source and binary forms, with or without
> -# modification, are permitted provided that the following conditions
> -# are met:
> -#
> -# * Redistributions of source code must retain the above copyright
> -# notice, this list of conditions and the following disclaimer.
> -# * Redistributions in binary form must reproduce the above copyright
> -# notice, this list of conditions and the following disclaimer in
> -# the documentation and/or other materials provided with the
> -# distribution.
> -# * Neither the name of Intel Corporation nor the names of its
> -# contributors may be used to endorse or promote products derived
> -# from this software without specific prior written permission.
> -#
> -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> -
> -"""
> -DPDK Test suite.
> -
> -Run Inter-VM share memory autotests
> -"""
> -
> -
> -from test_case import TestCase
> -
> -#
> -#
> -# Test class.
> -#
> -
> -
> -class TestUnitTestsIvshmem(TestCase):
> -
> - #
> - #
> - #
> - # Test cases.
> - #
> -
> - def set_up_all(self):
> - """
> - Run at the start of each test suite.
> - """
> - [arch, machine, env, toolchain] = self.dut.target.split('-')
> - self.target = "%s-%s-%s-%s" % (arch, "ivshmem", env, toolchain)
> - self.verify(arch == "x86_64", "ivshmem only support x86_64")
> - self.dut.build_install_dpdk(self.target)
> -
> - def set_up(self):
> - """
> - Run before each test case.
> - Nothing to do here.
> - """
> - pass
> -
> - def test_ivshmem(self):
> - """
> - Run Inter-VM share memory test.
> - """
> - self.dut.send_expect("./%s/app/test -n 1 -c ffff" % (self.target), "R.*T.*E.*>.*>", 60)
> - out = self.dut.send_expect("ivshmem_autotest", "RTE>>", 120)
> - self.dut.send_expect("quit", "# ")
> - self.verify("Test OK" in out, "Test failed")
> -
> - def tear_down(self):
> - """
> - Run after each test case.
> - Nothing to do here.
> - """
> - pass
> -
> - def tear_down_all(self):
> - """
> - Run after each test suite.
> - Remove ivshmem tempory folder
> - """
> - self.dut.send_expect("rm -rf " + self.target, "#")
> - pass
next prev parent reply other threads:[~2016-09-08 6:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-08 1:58 xu,huilong
2016-09-08 6:49 ` Liu, Yong [this message]
2016-09-08 7:51 xu,gang
2016-09-08 8:09 ` Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57D109E6.107@intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=huilongx.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).