* [dts] [PATCH V2 2/2] tests/vlan_ethertype_config: add script
2017-03-27 2:54 [dts] [PATCH V2 1/2] test_plans/vlan_ethertype_config_test_plan: using outer instead inner to config single vlan tpid Lijuan Tu
@ 2017-03-27 2:54 ` Lijuan Tu
2017-03-27 6:45 ` [dts] [PATCH V2 1/2] test_plans/vlan_ethertype_config_test_plan: using outer instead inner to config single vlan tpid Liu, Yong
1 sibling, 0 replies; 3+ messages in thread
From: Lijuan Tu @ 2017-03-27 2:54 UTC (permalink / raw)
To: dts, yulong.pei; +Cc: Lijuan Tu
Signed-off-by: Lijuan Tu <lijuanx.a.tu@intel.com>
---
tests/TestSuite_vlan_ethertype_config.py | 363 +++++++++++++++++++++++++++++++
1 file changed, 363 insertions(+)
create mode 100644 tests/TestSuite_vlan_ethertype_config.py
diff --git a/tests/TestSuite_vlan_ethertype_config.py b/tests/TestSuite_vlan_ethertype_config.py
new file mode 100644
index 0000000..98bbfe6
--- /dev/null
+++ b/tests/TestSuite_vlan_ethertype_config.py
@@ -0,0 +1,363 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+
+Test the support of VLAN Offload Features by Poll Mode Drivers.
+
+"""
+
+import dts
+import time
+import utils
+
+from test_case import TestCase
+from pmd_output import PmdOutput
+from packet import Packet, sniff_packets, load_sniff_packets
+from scapy.utils import struct, socket, wrpcap, rdpcap
+from scapy.layers.inet import Ether, IP, TCP, UDP, ICMP
+from scapy.layers.l2 import Dot1Q, ARP, GRE
+from scapy.sendrecv import sendp
+from settings import DPDK_RXMODE_SETTING
+from settings import load_global_setting
+
+import random
+MAX_VLAN = 4095
+
+
+class TestVlanEthertypeConfig(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+
+
+ Vlan Prerequistites
+ """
+ global dutRxPortId
+ global dutTxPortId
+
+ # Based on h/w type, choose how many ports to use
+ ports = self.dut.get_ports()
+
+ # Verify that enough ports are available
+ self.verify(len(ports) >= 2, "Insufficient ports")
+
+ valports = [_ for _ in ports if self.tester.get_local_port(_) != -1]
+ dutRxPortId = valports[0]
+ dutTxPortId = valports[1]
+ port = self.tester.get_local_port(dutTxPortId)
+ self.rxItf = self.tester.get_interface(port)
+
+ self.portmask = utils.create_mask(valports[:2])
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.pmdout = PmdOutput(self.dut)
+ self.pmdout.start_testpmd("Default", "--portmask=%s" % self.portmask)
+ if self.kdriver == "i40e":
+ self.dut.send_expect("set promisc all off", "testpmd> ")
+
+ def start_tcpdump(self, rxItf):
+
+ self.tester.alt_session.send_expect(
+ "rm -rf /tmp/getPkgByTcpdump_%s.cap" % rxItf, "#")
+ self.tester.alt_session.send_expect(
+ "tcpdump -i %s -w /tmp/getPkgByTcpdump_%s.cap" % (rxItf, rxItf), "listening on")
+
+ def get_tcpdump_packet(self, rxItf):
+ recv_pattern = self.tester.alt_session.send_expect("^C", "#")
+ fmt = '1/1 "%02x"'
+ out = self.tester.send_expect(
+ "hexdump -ve '%s' '/tmp/getPkgByTcpdump_%s.cap'" % (fmt, rxItf), "# ")
+ return out
+
+ def vlan_send_packet(self, outer_vid, outer_tpid=0x8100, inner_vid=-1, inner_tpid=-1):
+ """
+ if vid is -1, it means send pakcage not include vlan id.
+ """
+
+ self.tpid_ori_file = "/tmp/tpid_ori.pcap"
+ self.tpid_new_file = "/tmp/tpid_new.pcap"
+ self.tester.send_expect("rm -rf /tmp/tpid_ori.pcap", "# ")
+ self.tester.send_expect("rm -rf /tmp/tpid_new.pcap", "# ")
+ # The package stream : testTxPort->dutRxPort->dutTxport->testRxPort
+ port = self.tester.get_local_port(dutRxPortId)
+ self.txItf = self.tester.get_interface(port)
+ self.smac = self.tester.get_mac(port)
+
+ port = self.tester.get_local_port(dutTxPortId)
+ self.rxItf = self.tester.get_interface(port)
+
+ # the package dect mac must is dut tx port id when the port promisc is
+ # off
+ self.dmac = self.dut.get_mac_address(dutRxPortId)
+
+ self.inst = sniff_packets(self.rxItf)
+ pkt = []
+ if outer_vid < 0 or outer_tpid <= 0:
+ pkt = [
+ Ether(dst="%s" % self.dmac, src="%s" % self.smac) / IP(len=46)]
+ wrpcap(self.tpid_new_file, pkt)
+ else:
+ pkt = [Ether(dst="%s" % self.dmac, src="%s" %
+ self.smac) / Dot1Q(vlan=1) / Dot1Q(vlan=2) / IP(len=46)]
+ wrpcap(self.tpid_ori_file, pkt)
+ fmt = '1/1 "%02x"'
+ out = self.tester.send_expect(
+ "hexdump -ve '%s' '%s'" % (fmt, self.tpid_ori_file), "# ")
+ if(inner_vid < 0 or inner_tpid <= 0):
+ replace = str("%04x" % outer_tpid) + str("%04x" % outer_vid)
+ else:
+ replace = str("%04x" % outer_tpid) + str("%04x" % outer_vid) + str(
+ "%04x" % inner_tpid) + str("%04x" % inner_vid)
+ fmt = '1/1 "%02x"'
+ out = self.tester.send_expect("hexdump -ve '%s' '%s' |sed 's/8100000181000002/%s/' |xxd -r -p > '%s'" % (
+ fmt, self.tpid_ori_file, replace, self.tpid_new_file), "# ")
+
+ self.tester.send_expect("scapy", ">>> ")
+ self.tester.send_expect(
+ "pkt=rdpcap('%s')" % self.tpid_new_file, ">>> ")
+ self.tester.send_expect("sendp(pkt, iface='%s')" % self.txItf, ">>> ")
+ self.tester.send_expect("quit()", "# ")
+
+ def check_vlan_packets(self, vlan, tpid, rxItf, result=True):
+
+ self.start_tcpdump(rxItf)
+ self.vlan_send_packet(vlan, tpid)
+ out = self.get_tcpdump_packet(self.rxItf)
+ tpid_vlan = str("%04x" % tpid) + str("%04x" % vlan)
+ print "tpid_vlan: %s" % tpid_vlan
+ if(result):
+ self.verify(tpid_vlan in out, "Wrong vlan:" + str(out))
+ else:
+ self.verify(tpid_vlan not in out, "Wrong vlan:" + str(out))
+
+ def test_vlan_change_tpid(self):
+ """
+ Test Case 1: change VLAN TPID
+ """
+ if self.kdriver == "fm10k":
+ print dts.RED("fm10k not support this case\n")
+ return
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ self.dut.send_expect("set fwd rxonly", "testpmd> ")
+ self.dut.send_expect("set verbose 1", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect(
+ "vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect(
+ "vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
+ rx_vlans = [1, random_vlan, MAX_VLAN]
+ tpids = [0x8100, 0xA100]
+ for tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (tpid, dutRxPortId), "testpmd> ")
+ for rx_vlan in rx_vlans:
+ self.vlan_send_packet(rx_vlan, tpid)
+ out = self.dut.get_session_output()
+ self.verify(
+ "PKT_RX_VLAN_PKT" in out, "Vlan recognized error:" + str(out))
+
+ def test_vlan_filter_on_off(self):
+ """
+ Disable receipt of VLAN packets
+ """
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" %
+ dutRxPortId, "testpmd> ", 20)
+ rx_vlans = [1, random_vlan, MAX_VLAN]
+ tpids = [0x8100, 0xA100]
+ for tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (tpid, dutRxPortId), "testpmd> ")
+ for rx_vlan in rx_vlans:
+ # test vlan filter on
+ self.dut.send_expect(
+ "vlan set filter on %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf, False)
+ # test vlan filter off
+ self.dut.send_expect(
+ "vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf)
+
+ def test_vlan_add_vlan_tag(self):
+ """
+ test adding VLAN Tag Identifier with changing VLAN TPID
+ """
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ rx_vlans = [1, random_vlan, MAX_VLAN]
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect(
+ "vlan set filter on %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" %
+ dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ")
+
+ tpids = [0x8100, 0xA100]
+ for tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (tpid, dutRxPortId), "testpmd> ")
+ for rx_vlan in rx_vlans:
+ self.dut.send_expect(
+ "rx_vlan add 0x%x %s" % (rx_vlan, dutRxPortId), "testpmd> ")
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf)
+
+ self.dut.send_expect("rx_vlan rm 0x%x %d" %
+ (rx_vlan, dutRxPortId), "testpmd> ", 30)
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf, False)
+
+ self.dut.send_expect("stop", "testpmd> ", 30)
+
+ def test_vlan_strip(self):
+ """
+ Test Case 4: test VLAN header striping with changing VLAN TPID
+ """
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ rx_vlans = [1, random_vlan, MAX_VLAN]
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect(
+ "vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect(
+ "vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ", 20)
+
+ tpids = [0x8100, 0xA100]
+ for tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (tpid, dutRxPortId), "testpmd> ")
+ for rx_vlan in rx_vlans:
+ self.dut.send_expect(
+ "vlan set strip on %s" % dutRxPortId, "testpmd> ", 20)
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf, False)
+ self.dut.send_expect(
+ "vlan set strip off %s" % dutRxPortId, "testpmd> ", 20)
+ self.check_vlan_packets(rx_vlan, tpid, self.rxItf)
+
+ def test_vlan_enable_vlan_insertion(self):
+ """
+ Test Case 5: test VLAN header inserting with changing VLAN TPID
+ """
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ tx_vlans = [2, random_vlan, MAX_VLAN]
+ self.dut.send_expect("set fwd mac", "testpmd> ")
+ self.dut.send_expect(
+ "vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ self.dut.send_expect("vlan set strip off %s" %
+ dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("start", "testpmd> ")
+
+ tpids = [0x8100, 0xA100]
+ for tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (tpid, dutTxPortId), "testpmd> ")
+ for tx_vlan in tx_vlans:
+ self.dut.send_expect(
+ "tx_vlan set %s 0x%x" % (dutTxPortId, tx_vlan), "testpmd> ")
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(-1)
+ out = self.get_tcpdump_packet(self.rxItf)
+ vlan_string = str("%04x" % tpid) + str("%04x" % tx_vlan)
+ self.verify(vlan_string in out, "Wrong vlan:" + str(out))
+ self.verify(str("%x" % tpid) in out, "Wrong vlan:" + str(out))
+ self.verify(
+ str("%x" % tx_vlan) in out, "Vlan not found:" + str(out))
+ self.dut.send_expect(
+ "tx_vlan reset %s" % dutTxPortId, "testpmd> ", 30)
+ self.start_tcpdump(self.rxItf)
+ self.vlan_send_packet(-1)
+ out = self.get_tcpdump_packet(self.rxItf)
+ vlan_string = str("%04x" % tpid) + str("%04x" % tx_vlan)
+ self.verify(vlan_string not in out, "Wrong vlan:" + str(out))
+
+ if self.kdriver == "fm10k":
+ for tx_vlan in tx_vlans:
+ netobj = self.dut.ports_info[dutTxPortId]['port']
+ # not delete vlan for self.vlan will used later
+ netobj.delete_txvlan(vlan_id=tx_vlan)
+
+ def test_vlan_qinq_tpid(self):
+ """
+ Test Case 6: Change S-Tag and C-Tag within QinQ
+ It need be tested in nonvector mode.
+ """
+ self.verify(
+ self.nic in ["fortville_eagle", "fortville_spirit", "fortville_spirit_single"], "%s NIC not support QinQ " % self.nic)
+ rx_mode = load_global_setting(DPDK_RXMODE_SETTING)
+ self.verify(rx_mode == 'novector',
+ "The case must by tested in novector mode")
+
+ random_vlan = random.randint(1, MAX_VLAN - 1)
+ rx_vlans = [1, random_vlan, MAX_VLAN]
+ self.dut.send_expect(
+ "vlan set qinq on %d" % dutRxPortId, "testpmd> ", 20)
+ self.dut.send_expect("set verbose 1", "testpmd> ")
+ self.dut.send_expect("set fwd rxonly", "testpmd> ")
+ self.dut.send_expect("start", "testpmd> ")
+ self.dut.send_expect(
+ "vlan set filter off %s" % dutRxPortId, "testpmd> ")
+ tpids = [0x8100, 0xA100, 0x88A8, 0x9100]
+ for outer_tpid in tpids:
+ for inner_tpid in tpids:
+ self.dut.send_expect("vlan set outer tpid 0x%x %s" %
+ (outer_tpid, dutRxPortId), "testpmd> ")
+ self.dut.send_expect("vlan set inner tpid 0x%x %s" %
+ (inner_tpid, dutRxPortId), "testpmd> ")
+ for outer_vlan in rx_vlans:
+ for inner_vlan in rx_vlans:
+ self.vlan_send_packet(
+ outer_vlan, outer_tpid, inner_vlan, inner_tpid)
+ out = self.dut.get_session_output()
+ self.verify("QinQ VLAN" in out, "Wrong QinQ:" + str(out))
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("stop", "testpmd> ", 30)
+ self.dut.send_expect("quit", "# ", 30)
+ pass
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ if self.kdriver == "fm10k":
+ netobj = self.dut.ports_info[dutRxPortId]['port']
+ netobj.delete_txvlan(vlan_id=self.vlan)
+ netobj.delete_vlan(vlan_id=self.vlan)
--
1.9.3
^ permalink raw reply [flat|nested] 3+ messages in thread