test suite reviews and discussions
 help / color / mirror / Atom feed
* [dts] [PATCH V1] modify the interrupt pmd test plan
@ 2017-05-27  2:18 xu,gang
  2017-05-27  2:18 ` [dts] [PATCH V1] add vf " xu,gang
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: xu,gang @ 2017-05-27  2:18 UTC (permalink / raw)
  To: dts; +Cc: xu,gang

Signed-off-by: xu,gang <gangx.xu@intel.com>
---
 test_plans/interrupt_pmd_test_plan.rst | 170 ++++-----------------------------
 1 file changed, 19 insertions(+), 151 deletions(-)

diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index 6dfd821..7503283 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -57,8 +57,8 @@ Iommu pass through feature has been enabled in kernel.
 Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d
 in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
 	
-Test Case1: PF interrupt pmd with uio
-=====================================
+Test Case1: PF interrupt pmd with different queue
+=================================================
 Run l3fwd-power with one queue per port::
 	l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
 
@@ -76,51 +76,29 @@ After the packet forwarded, thread on core1 and core 2 will return to sleep.
 Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
 keep up awake.	
 
-Test Case2: PF interrupt pmd with vfio
-======================================
-Run l3fwd-power with one queue per port::
-	l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+Run l3fwd-power with random number queue per port, if is 4::
+        l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
+                        (0,2,2),(0,3,3),(0,4,4)"
 
-Send one packet to Port0 and Port1, check that thread on core1 and core2 
-waked up:
-	L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
-	
-Check the packet has been normally forwarded.
-
-After the packet forwarded, thread on core1 and core 2 will return to sleep.
-	L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-	L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
+Send packet with increased dest IP to Port0, check that all threads waked up
 
 Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
-keep up awake.	
-
-Test Case3: PF interrupt pmd multi queue with vfio
-==================================================
-Run l3fwd-power with two queues per port::
-	l3fwd-power -c 1f -n 4 -- -p 0x3 \
-		--config="(0,0,1),(0,1,2)(1,0,3),(1,1,4)"
+keep up awake.
 
-Send packet with increased dest IP to Port0 and Port1, check that thread on 
-core1,core2,core3,core4 waked up:
-	L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq1
-	L3FWD_POWER: lcore 3 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 4 is waked up from rx interrupt on port1,rxq1
-	
-Check the packet has been normally forwarded.
+Run l3fwd-power with 32 queues per port::
+        l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+                        (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
+                        (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
+                        (0,15,15),\
+                        (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
+                        (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
+                        (1,13,29),(1,14,30),\(1,15,31)"
+Send packet with increased dest IP to Port0, check that all threads waked up
 
-After the packet forwarded, thread on core1,core2,core3,core4 will return to 
-sleep.
-	L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-	L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq1 triggers
-	L3FWD_POWER: lcore 3 sleeps until interrupt on port1,rxq0 triggers
-	L3FWD_POWER: lcore 4 sleeps until interrupt on port1,rxq1 triggers
+igb_uio driver only ues one queue 0
 
-Send packet flows to Port0 and Port1, check that thread on core1,core2,core3,
-core4 will keep up awake.
 
-Test Case4: PF lsc interrupt with vfio
+Test Case2: PF lsc interrupt with vfio
 ======================================
 Run l3fwd-power with one queue per port::
 	l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
@@ -137,118 +115,8 @@ driver.
 Plug in Port1 cable, check that link up interrtup captured and handled by pmd 
 driver.
 
-Test Case5: PF interrupt max Rx queues with vfio
-================================================
-Run l3fwd-power with 32 queues per port::
-	l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
-			(0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
-			(0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
-			(0,15,15),\
-			(1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
-			(1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
-			(1,13,29),(1,14,30),\(1,15,31)"
-
-Send packet with increased dest IP to Port0, check that all threads waked up:
-
-Test Case6: VF interrupt pmd in VM with uio
-===========================================
-Create one VF per Port in host and add these two VFs into VM:
-	rmmod ixgbe
-	modprobe ixgbe max_vfs=1
-	virsh
-	virsh # nodedev-dettach PCI_VF1
-	virsh # nodedev-dettach PCI_VF2
-	
-Assign mac address for VF:
-	ip link set p786p1 vf 0 mac 00:11:22:33:44:55
-	ip link set p786p2 vf 0 mac 00:11:22:33:44:66
-
-Start VM and start l3fwd-power with one queue per port in VM:
-	l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
-
-Send one packet to VF0 and VF1, check that thread on core1 and core2 waked up:
-	L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
-	
-Check the packet has been normally forwarded.
-
-After the packet forwarded, thread on core1 and core 2 will return to sleep.
-	L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-	L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
-
-Send packet flows to VF0 and VF1, check that thread on core1 and core2 will 
-keep up awake.
-
-Test Case7: VF interrupt pmd in Host with uio
-=============================================
-Create one VF per Port in host and make sure PF interface up:
-	rmmod ixgbe
-	modprobe ixgbe max_vfs=1
-	ifconfig p786p1 up
-	ifconfig p786p2 up
-	
-Assign mac address for VF:
-	ip link set p786p1 vf 0 mac 00:11:22:33:44:55
-	ip link set p786p2 vf 0 mac 00:11:22:33:44:66
-
-Bind VF device to igb_uio:
-	./usertools/dpdk-devbind.py --bind=igb_uio 0000:08:10.0 0000:08:10.1
-	
-Start VM and start l3fwd-power with one queue per port in VM:
-	l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
-
-Send one packet to VF0 and VF1, check that thread on core1 and core2 waked up:
-	L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
-	
-Check the packet has been normally forwarded.
-
-After the packet forwarded, thread on core1 and core 2 will return to sleep.
-	L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-	L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
-
-Send packet flows to VF0 and VF1, check that thread on core1 and core2 will 
-keep up awake.
-
-Test Case8: VF interrupt pmd in Host with vfio
-==============================================
-Create one VF per Port in host and make sure PF interface up:
-	rmmod ixgbe
-	modprobe ixgbe max_vfs=2
-	ifconfig p786p1 up
-	ifconfig p786p2 up
-	
-Assign mac address for VF:
-	ip link set p786p1 vf 0 mac 00:11:22:33:44:55
-	ip link set p786p2 vf 0 mac 00:11:22:33:44:66
-
-Bind VF device to igb_uio:
-	./usertools/dpdk-devbind.py --bind=igb_uio 0000:08:10.0 0000:08:10.1
-	
-Start VM and start l3fwd-power with two queues per port in VM:
-	l3fwd-power -c 1f -n 4 -- -p 0x3 -P \
-		--config="(0,0,1),(0,1,2)(1,0,3),(1,1,4)"
-
-Send packets with increased dest IP to Port0 and Port1, check that thread on 
-core1,core2,core3,core4 waked up:
-	L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq1
-	L3FWD_POWER: lcore 3 is waked up from rx interrupt on port1,rxq0
-	L3FWD_POWER: lcore 4 is waked up from rx interrupt on port1,rxq1
-	
-Check the packet has been normally forwarded.
-
-After the packet forwarded, thread on core1,core2,core3,core4 will return to 
-sleep.
-	L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
-	L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq1 triggers
-	L3FWD_POWER: lcore 3 sleeps until interrupt on port1,rxq0 triggers
-	L3FWD_POWER: lcore 4 sleeps until interrupt on port1,rxq1 triggers
-
-Send packet flows to Port0 and Port1, check that thread on core1,core2,core3,
-core4 will keep up awake.
 
-Test Case9: PF interrupt pmd latency test
+Test Case3: PF interrupt pmd latency test
 =========================================
 Setup validation scenario the case as test1
 Send burst packet flow to Port0 and Port1, use IXIA capture the maxmium 
-- 
1.9.3

^ permalink raw reply	[flat|nested] 7+ messages in thread
* [dts] [PATCH V2] add test suite for vf interruot_pmd
@ 2017-09-08  2:30 xu,gang
  2017-09-08  2:30 ` [dts] [PATCH V1] add test suite vf interrupt_pmd xu,gang
  0 siblings, 1 reply; 7+ messages in thread
From: xu,gang @ 2017-09-08  2:30 UTC (permalink / raw)
  To: dts; +Cc: xu,gang

Signed-off-by: xu,gang <gangx.xu@intel.com>
---
 tests/TestSuite_vf_interrupt_pmd.py | 295 ++++++++++++++++++++++++++++++++++++
 1 file changed, 295 insertions(+)
 create mode 100644 tests/TestSuite_vf_interrupt_pmd.py

diff --git a/tests/TestSuite_vf_interrupt_pmd.py b/tests/TestSuite_vf_interrupt_pmd.py
new file mode 100644
index 0000000..b78bf8f
--- /dev/null
+++ b/tests/TestSuite_vf_interrupt_pmd.py
@@ -0,0 +1,295 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+#   * Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#   * Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in
+#     the documentation and/or other materials provided with the
+#     distribution.
+#   * Neither the name of Intel Corporation nor the names of its
+#     contributors may be used to endorse or promote products derived
+#     from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test vf_interrupt_pmd.
+"""
+
+import utils
+import string
+import time
+import re
+from pmd_output import PmdOutput
+from qemu_kvm import QEMUKvm
+from test_case import TestCase
+
+
+class TestVfInterruptPmd(TestCase):
+
+    def set_up_all(self):
+        """
+        Run at the start of each test suite.
+        """
+        self.dut_ports = self.dut.get_ports(self.nic)
+        self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+        cores = self.dut.get_core_list("1S/4C/1T")
+        self.coremask = utils.create_mask(cores)
+        self.portmask = utils.create_mask(self.dut_ports)
+
+        self.path = "./examples/l3fwd-power/build/l3fwd-power"
+
+        testport_0 = self.tester.get_local_port(self.dut_ports[0])
+        self.rx_intf_0 = self.tester.get_interface(testport_0)
+        testport_1 = self.tester.get_local_port(self.dut_ports[1])
+        self.rx_intf_1 = self.tester.get_interface(testport_1)
+
+        self.mac_port_0 = self.dut.get_mac_address(self.dut_ports[0])
+        self.mac_port_1 = self.dut.get_mac_address(self.dut_ports[1])
+
+        self.dut.virt_exit()
+
+    def build_app(self, use_dut):
+        # build sample app
+        out = use_dut.build_dpdk_apps("./examples/l3fwd-power")
+        self.verify("Error" not in out, "compilation error 1")
+        self.verify("No such file" not in out, "compilation error 2")
+
+    def set_up(self):
+        """
+        Run before each test case.
+        """
+        pass
+
+    def generate_sriov_vfport(self, use_driver):
+        """
+        generate sriov vfs by port
+        """
+        self.used_dut_port_0 = self.dut_ports[0]
+        self.used_dut_port_1 = self.dut_ports[1]
+        self.dut.generate_sriov_vfs_by_port(
+            self.used_dut_port_0, 1, driver=use_driver)
+        self.sriov_vfs_port_0 = self.dut.ports_info[
+            self.used_dut_port_0]['vfs_port']
+        self.dut.generate_sriov_vfs_by_port(
+            self.used_dut_port_1, 1, driver=use_driver)
+        self.sriov_vfs_port_1 = self.dut.ports_info[
+            self.used_dut_port_1]['vfs_port']
+
+    def bind_vfs(self, driver):
+        """
+        bind vfs to driver
+        """
+        for port in self.sriov_vfs_port_0:
+            port.bind_driver(driver)
+        time.sleep(1)
+        for port in self.sriov_vfs_port_1:
+            port.bind_driver(driver)
+        time.sleep(1)
+
+    def setup_vm_env(self):
+        """
+        Start One VM with one virtio device
+        """
+        self.dut_testpmd = PmdOutput(self.dut)
+        self.dut_testpmd.start_testpmd(
+            "Default", "--rxq=4 --txq=4 --port-topology=chained")
+        self.dut_testpmd.execute_cmd("start")
+
+        vf0_prop_1 = {'opt_host': self.sriov_vfs_port_0[0].pci}
+        vf0_prop_2 = {'opt_host': self.sriov_vfs_port_1[0].pci}
+        self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_interrupt_pmd')
+        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_1)
+        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_2)
+        try:
+            self.vm0_dut = self.vm0.start()
+            if self.vm0_dut is None:
+                raise Exception("Set up VM ENV failed")
+            else:
+                self.verify(self.vm0_dut.ports_info[
+                            0]['intf'] != 'N/A', "Not interface")
+        except Exception as e:
+            self.destroy_vm_env()
+            self.logger.error("Failure for %s" % str(e))
+
+        self.vm0_vf0_mac = self.vm0_dut.get_mac_address(0)
+        self.vm0_vf1_mac = self.vm0_dut.get_mac_address(1)
+        self.vm0_dut.send_expect("systemctl stop NetworkManager", "# ", 60)
+
+    def destroy_vm_env(self):
+        """
+        destroy vm environment
+        """
+        if getattr(self, 'vm0', None):
+            self.vm0_dut.kill_all()
+            self.vm0_dut_ports = None
+            # destroy vm0
+            self.vm0.stop()
+            self.vm0 = None
+
+        if getattr(self, 'used_dut_port_0', None) != None:
+            self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_0)
+            self.used_dut_port_0 = None
+
+        if getattr(self, 'used_dut_port_1', None) != None:
+            self.dut.destroy_sriov_vfs_by_port(self.used_dut_port_1)
+            self.used_dut_port_1 = None
+
+        self.env_done = False
+
+    def change_port_conf(self, use_dut, lsc_enable=True, rxq_enable=True):
+        """
+        change interrupt enable
+        """
+        sed_cmd_fmt = "/intr_conf.*=.*{/,/\}\,$/c\    .intr_conf = {\\n\\t\\t.lsc = %d,\\n\\t\\t.rxq = %d,\\n\\t},"
+        lsc = 1
+        rxq = 1
+        if lsc_enable:
+            lsc = 0
+        if rxq_enable:
+            rxq = 1
+        sed_cmd_str = sed_cmd_fmt % (lsc, rxq)
+        out = use_dut.send_expect(
+            "sed -i '%s' examples/l3fwd-power/main.c" % sed_cmd_str, "# ", 60)
+
+    def scapy_send_packet(self, mac, testinterface, queuenum=1):
+        """
+        Send a packet to port
+        """
+        if queuenum == 1:
+            self.tester.scapy_append(
+                'sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, testinterface))
+        elif queuenum == 2:
+            for dst in range(16):
+                self.tester.scapy_append(
+                    'sendp([Ether(dst="%s")/IP(dst="127.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, dst, testinterface))
+        else:
+            for dst in range(256):
+                self.tester.scapy_append(
+                    'sendp([Ether(dst="%s")/IP(dst="127.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (mac, dst, testinterface))
+        self.tester.scapy_execute()
+
+    def test_vf_VM_uio(self):
+        """
+        verify VF interrupt pmd in VM with uio
+        """
+        self.verify(self.drivername in ['igb_uio'], "NOT Support")
+        self.generate_sriov_vfport('igb_uio')
+        self.bind_vfs('pci-stub')
+        self.setup_vm_env()
+        self.change_port_conf(self.vm0_dut, lsc_enable=True, rxq_enable=False)
+        self.build_app(self.vm0_dut)
+
+        cmd = self.path + \
+            " -c f -n %d -- -p 0x3 -P --config='(0,0,1),(1,0,2)'" % (
+                self.vm0_dut.get_memory_channels())
+        self.vm0_dut.send_expect(cmd, "L3FWD_POWER", 60)
+        self.scapy_send_packet(self.vm0_vf0_mac, self.rx_intf_0)
+        self.scapy_send_packet(self.vm0_vf1_mac, self.rx_intf_1)
+        out = self.vm0_dut.get_session_output(timeout=30)
+        self.destroy_vm_env()
+        self.dut.send_expect("quit", "# ", 60)
+        self.verify(
+            "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+        self.verify(
+            "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+        self.verify(
+            "lcore 2 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+        self.verify(
+            "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+    def test_vf_host_uio(self):
+        """
+        verify VF interrupt pmd in Host with uio
+        """
+        self.verify(self.drivername in ['igb_uio'], "NOT Support")
+        self.dut.restore_interfaces()
+        self.generate_sriov_vfport('ixgbe')
+        self.bind_vfs('igb_uio')
+        self.change_port_conf(self.dut, lsc_enable=True, rxq_enable=False)
+        self.build_app(self.dut)
+
+        cmd = self.path + " -c %s -n %d -- -p %s -P --config='(0,0,1),(1,0,2)'" % (
+            self.coremask, self.dut.get_memory_channels(), self.portmask)
+        self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+        self.scapy_send_packet(self.mac_port_0, self.rx_intf_0)
+        self.scapy_send_packet(self.mac_port_1, self.rx_intf_1)
+        out = self.dut.get_session_output(timeout=60)
+        self.dut.send_expect("^C", "# ", 60)
+        self.verify(
+            "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+        self.verify(
+            "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+        self.verify(
+            "lcore 2 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+        self.verify(
+            "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+    def test_vf_host_vfio(self):
+        """
+        verify VF interrupt pmd in Host with vfio
+        """
+        self.verify(self.drivername in ['vfio-pci'], "NOT Support")
+        self.dut.restore_interfaces()
+        self.generate_sriov_vfport('ixgbe')
+        self.bind_vfs('vfio-pci')
+        self.change_port_conf(self.dut, lsc_enable=True, rxq_enable=False)
+        self.build_app(self.dut)
+
+        cmd = self.path + " -c %s -n %d -- -p %s -P --config='(0,0,1),(0,1,2)(1,0,3),(1,1,4)'" % (
+            self.coremask, self.dut.get_memory_channels(), self.portmask)
+        self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+        self.scapy_send_packet(self.mac_port_0, self.rx_intf_0, 2)
+        self.scapy_send_packet(self.mac_port_1, self.rx_intf_1, 2)
+        out = self.dut.get_session_output(timeout=60)
+        self.dut.send_expect("^C", "# ", 60)
+        print out
+        self.verify(
+            "lcore 1 is waked up from rx interrupt on port 0" in out, "lcore 1 not waked up")
+        self.verify(
+            "lcore 1 sleeps until interrupt triggers" in out, "lcore 1 not sleeps")
+        self.verify(
+            "lcore 2 is waked up from rx interrupt on port 0" in out, "lcore 2 not waked up")
+        self.verify(
+            "lcore 2 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+        self.verify(
+            "lcore 3 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+        self.verify(
+            "lcore 3 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+        self.verify(
+            "lcore 4 is waked up from rx interrupt on port 1" in out, "lcore 2 not waked up")
+        self.verify(
+            "lcore 4 sleeps until interrupt triggers" in out, "lcore 2 not sleeps")
+
+    def tear_down(self):
+        """
+        Run after each test case.
+        """
+        self.dut.virt_exit()
+        self.dut.kill_all()
+        time.sleep(2)
+
+    def tear_down_all(self):
+        """
+        Run after each test suite.
+        """
+        pass
-- 
1.9.3

^ permalink raw reply	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2017-09-08  2:29 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-27  2:18 [dts] [PATCH V1] modify the interrupt pmd test plan xu,gang
2017-05-27  2:18 ` [dts] [PATCH V1] add vf " xu,gang
2017-06-09 12:48   ` Liu, Yong
2017-05-27  2:18 ` [dts] [PATCH V1] add test suite vf interrupt_pmd xu,gang
2017-06-09 12:53   ` Liu, Yong
2017-06-09 12:45 ` [dts] [PATCH V1] modify the interrupt pmd test plan Liu, Yong
2017-09-08  2:30 [dts] [PATCH V2] add test suite for vf interruot_pmd xu,gang
2017-09-08  2:30 ` [dts] [PATCH V1] add test suite vf interrupt_pmd xu,gang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).