* [dts] [PATCH V1] tests/port_representor:automation of port_representor
@ 2019-11-11 9:21 Xie Wei
2019-11-12 1:54 ` Xiao, QimaiX
2019-11-13 6:42 ` Ma, LihongX
0 siblings, 2 replies; 3+ messages in thread
From: Xie Wei @ 2019-11-11 9:21 UTC (permalink / raw)
To: dts; +Cc: Xie Wei
new automation of port_representor according to test plan
Signed-off-by: Xie Wei <weix.xie@intel.com>
---
tests/TestSuite_port_representor.py | 291 ++++++++++++++++++++++++++++
1 file changed, 291 insertions(+)
create mode 100644 tests/TestSuite_port_representor.py
diff --git a/tests/TestSuite_port_representor.py b/tests/TestSuite_port_representor.py
new file mode 100644
index 0000000..eac8491
--- /dev/null
+++ b/tests/TestSuite_port_representor.py
@@ -0,0 +1,291 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Use two representor ports as the control plane to manage the two VFs,
+the control plane could change VFs behavior such as change promiscous
+mode, stats reset, etc. our statistical data information is
+independent on the control plane and data plane.
+"""
+
+import time
+import re
+
+from test_case import TestCase
+from dut import Dut
+from packet import Packet
+
+
+class TestPortRepresentor(TestCase):
+ def set_up_all(self):
+ """
+ Prerequisite steps for each test suite.
+ """
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "fortville_25g"], "NIC Unsupported: " + str(self.nic))
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+
+ self.session_secondary = self.dut.new_session()
+ self.session_third = self.dut.new_session()
+
+ localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_itf = self.tester.get_interface(localPort)
+ self.tester_mac = self.tester.get_mac(localPort)
+ self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
+ self.pf_mac = self.dut.get_mac_address(0)
+ self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
+
+ self.unicast_mac = "00:11:22:33:44:55"
+
+ # This is to set up 1pf and 2vfs environment
+ # PF is bound to igb_uio, while VF is bound to vfio-pci.
+ self.dut.send_expect("modprobe uio", "#", 70)
+ self.dut.send_expect("insmod ./" + self.target + "/kmod/igb_uio.ko", "#", 60)
+ self.dut.send_expect("modprobe vfio-pci", "#", 70)
+
+ self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], 2, "igb_uio")
+ self.two_vfs_port = self.dut.ports_info[self.dut_ports[0]]["vfs_port"]
+ try:
+ for port in self.two_vfs_port:
+ port.bind_driver(driver="vfio-pci")
+ except Exception as e:
+ self.destroy_env()
+ raise Exception(e)
+ self.vfs_pci = self.dut.ports_info[self.dut_ports[0]]['sriov_vfs_pci']
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.vf_flag = 1
+
+ def destroy_env(self):
+ """
+ This is to stop testpmd and destroy 1pf and 2vfs environment.
+ """
+ if self.vf_flag == 1:
+ self.session_third.send_expect("quit", "#")
+ time.sleep(3)
+ self.session_secondary.send_expect("quit", "#")
+ time.sleep(3)
+ self.dut.send_expect("quit", "#")
+ time.sleep(3)
+ else:
+ self.dut.send_expect("quit", "#")
+ self.vf_flag = 0
+
+ def testpmd_pf(self):
+ cmd_pf = "./%s/app/testpmd --lcores 1,2 -n 4 -w %s,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained" % (self.target, self.pf_pci)
+ return self.dut.send_expect(cmd_pf, "testpmd", 120)
+
+ def testpmd_vf0(self):
+ cmd_vf0 = "./%s/app/testpmd --lcores 3,4 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf0 -- -i" % (self.target, self.vfs_pci[0])
+ self.out_vf0 = self.session_secondary.send_expect(cmd_vf0, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf0_mac = pattern.search(self.out_vf0).group()
+
+ def testpmd_vf1(self):
+ cmd_vf1 = "./%s/app/testpmd --lcores 5,6 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf1 -- -i" % (self.target, self.vfs_pci[1])
+ self.out_vf1 = self.session_third.send_expect(cmd_vf1, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf1_mac = pattern.search(self.out_vf1).group()
+
+ def test_port_representor_vf_stats_show_and_clear(self):
+ """
+ use control testpmd to get and clear dataplane testpmd ports Stats
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2, pkt3]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ output_before = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_before)
+ result_before = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_before, re.S)
+ self.verify(int(result_before[1]) == 10 and int(result_before[2]) == 10, "VF Stats show error")
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
+ output_after = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_after)
+ result_after = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_after, re.S)
+ self.verify(int(result_after[1]) == 0 and int(result_after[2]) == 0, "VF Stats clear error")
+
+ def test_port_representor_vf_promiscous(self):
+ """
+ use control testpmd to enable/disable dataplane testpmd ports promiscous mode
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # vf promiscous enable
+ self.dut.send_expect("set promisc 1 on", "testpmd>")
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_enable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_enable)
+ result_enable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_enable, re.S)
+ self.verify(int(result_enable[1]) == 20 and int(result_enable[2]) == 20, "VFs receive packets error")
+
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
+
+ # vf promiscous disable
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_disable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_disable)
+ result_disable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_disable, re.S)
+ self.verify(int(result_disable[1]) == 10 and int(result_disable[2]) == 20, "VFs receive packets error")
+
+ def test_port_representor_vf_mac_addr(self):
+ """
+ use control testpmd to set vf mac address
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("mac_addr set 1 aa:11:22:33:44:55", "testpmd>")
+ self.dut.send_expect("mac_addr set 2 aa:22:33:44:55:66", "testpmd>")
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs receive packets error")
+
+ def test_port_representor_vlan_filter(self):
+ """
+ use control testpmd to set vlan
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 1", "testpmd>")
+ self.dut.send_expect("rx_vlan add 3 1", "testpmd>")
+ self.dut.send_expect("set promisc 2 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 2", "testpmd>")
+ self.dut.send_expect("rx_vlan add 4 2", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=3)/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=4)/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs receive packets error")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.destroy_env()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
+ self.dut.close_session(self.session_secondary)
+ self.dut.close_session(self.session_third)
--
2.17.2
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1] tests/port_representor:automation of port_representor
2019-11-11 9:21 [dts] [PATCH V1] tests/port_representor:automation of port_representor Xie Wei
@ 2019-11-12 1:54 ` Xiao, QimaiX
2019-11-13 6:42 ` Ma, LihongX
1 sibling, 0 replies; 3+ messages in thread
From: Xiao, QimaiX @ 2019-11-12 1:54 UTC (permalink / raw)
To: Xie, WeiX, dts; +Cc: Xie, WeiX
[-- Attachment #1: Type: text/plain, Size: 14612 bytes --]
Tested-by: Xiao Qimai <qimaix.xiao@intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xie Wei
Sent: Monday, November 11, 2019 5:21 PM
To: dts@dpdk.org
Cc: Xie, WeiX <weix.xie@intel.com>
Subject: [dts] [PATCH V1] tests/port_representor:automation of port_representor
new automation of port_representor according to test plan
Signed-off-by: Xie Wei <weix.xie@intel.com>
---
tests/TestSuite_port_representor.py | 291 ++++++++++++++++++++++++++++
1 file changed, 291 insertions(+)
create mode 100644 tests/TestSuite_port_representor.py
diff --git a/tests/TestSuite_port_representor.py b/tests/TestSuite_port_representor.py
new file mode 100644
index 0000000..eac8491
--- /dev/null
+++ b/tests/TestSuite_port_representor.py
@@ -0,0 +1,291 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Use two representor ports as the control plane to manage the two VFs,
+the control plane could change VFs behavior such as change promiscous
+mode, stats reset, etc. our statistical data information is independent
+on the control plane and data plane.
+"""
+
+import time
+import re
+
+from test_case import TestCase
+from dut import Dut
+from packet import Packet
+
+
+class TestPortRepresentor(TestCase):
+ def set_up_all(self):
+ """
+ Prerequisite steps for each test suite.
+ """
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "fortville_25g"], "NIC Unsupported: " + str(self.nic))
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+
+ self.session_secondary = self.dut.new_session()
+ self.session_third = self.dut.new_session()
+
+ localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_itf = self.tester.get_interface(localPort)
+ self.tester_mac = self.tester.get_mac(localPort)
+ self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
+ self.pf_mac = self.dut.get_mac_address(0)
+ self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
+
+ self.unicast_mac = "00:11:22:33:44:55"
+
+ # This is to set up 1pf and 2vfs environment
+ # PF is bound to igb_uio, while VF is bound to vfio-pci.
+ self.dut.send_expect("modprobe uio", "#", 70)
+ self.dut.send_expect("insmod ./" + self.target + "/kmod/igb_uio.ko", "#", 60)
+ self.dut.send_expect("modprobe vfio-pci", "#", 70)
+
+ self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], 2, "igb_uio")
+ self.two_vfs_port = self.dut.ports_info[self.dut_ports[0]]["vfs_port"]
+ try:
+ for port in self.two_vfs_port:
+ port.bind_driver(driver="vfio-pci")
+ except Exception as e:
+ self.destroy_env()
+ raise Exception(e)
+ self.vfs_pci =
+ self.dut.ports_info[self.dut_ports[0]]['sriov_vfs_pci']
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.vf_flag = 1
+
+ def destroy_env(self):
+ """
+ This is to stop testpmd and destroy 1pf and 2vfs environment.
+ """
+ if self.vf_flag == 1:
+ self.session_third.send_expect("quit", "#")
+ time.sleep(3)
+ self.session_secondary.send_expect("quit", "#")
+ time.sleep(3)
+ self.dut.send_expect("quit", "#")
+ time.sleep(3)
+ else:
+ self.dut.send_expect("quit", "#")
+ self.vf_flag = 0
+
+ def testpmd_pf(self):
+ cmd_pf = "./%s/app/testpmd --lcores 1,2 -n 4 -w %s,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained" % (self.target, self.pf_pci)
+ return self.dut.send_expect(cmd_pf, "testpmd", 120)
+
+ def testpmd_vf0(self):
+ cmd_vf0 = "./%s/app/testpmd --lcores 3,4 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf0 -- -i" % (self.target, self.vfs_pci[0])
+ self.out_vf0 = self.session_secondary.send_expect(cmd_vf0, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf0_mac = pattern.search(self.out_vf0).group()
+
+ def testpmd_vf1(self):
+ cmd_vf1 = "./%s/app/testpmd --lcores 5,6 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf1 -- -i" % (self.target, self.vfs_pci[1])
+ self.out_vf1 = self.session_third.send_expect(cmd_vf1, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf1_mac = pattern.search(self.out_vf1).group()
+
+ def test_port_representor_vf_stats_show_and_clear(self):
+ """
+ use control testpmd to get and clear dataplane testpmd ports Stats
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2, pkt3]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ output_before = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_before)
+ result_before = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_before, re.S)
+ self.verify(int(result_before[1]) == 10 and int(result_before[2]) == 10, "VF Stats show error")
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
+ output_after = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_after)
+ result_after = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_after, re.S)
+ self.verify(int(result_after[1]) == 0 and int(result_after[2])
+ == 0, "VF Stats clear error")
+
+ def test_port_representor_vf_promiscous(self):
+ """
+ use control testpmd to enable/disable dataplane testpmd ports promiscous mode
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # vf promiscous enable
+ self.dut.send_expect("set promisc 1 on", "testpmd>")
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_enable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_enable)
+ result_enable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_enable, re.S)
+ self.verify(int(result_enable[1]) == 20 and
+ int(result_enable[2]) == 20, "VFs receive packets error")
+
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
+
+ # vf promiscous disable
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_disable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_disable)
+ result_disable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_disable, re.S)
+ self.verify(int(result_disable[1]) == 10 and
+ int(result_disable[2]) == 20, "VFs receive packets error")
+
+ def test_port_representor_vf_mac_addr(self):
+ """
+ use control testpmd to set vf mac address
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("mac_addr set 1 aa:11:22:33:44:55", "testpmd>")
+ self.dut.send_expect("mac_addr set 2 aa:22:33:44:55:66", "testpmd>")
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def test_port_representor_vlan_filter(self):
+ """
+ use control testpmd to set vlan
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 1", "testpmd>")
+ self.dut.send_expect("rx_vlan add 3 1", "testpmd>")
+ self.dut.send_expect("set promisc 2 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 2", "testpmd>")
+ self.dut.send_expect("rx_vlan add 4 2", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=3)/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=4)/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.destroy_env()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
+ self.dut.close_session(self.session_secondary)
+ self.dut.close_session(self.session_third)
--
2.17.2
[-- Attachment #2: TestPortRepresentor.log --]
[-- Type: application/octet-stream, Size: 50806 bytes --]
12/11/2019 21:39:36 dts:
TEST SUITE : TestPortRepresentor
12/11/2019 21:39:36 dts: NIC : fortville_eagle
12/11/2019 21:39:36 dut.10.240.176.208:
12/11/2019 21:39:36 tester:
12/11/2019 21:39:39 dut.10.240.176.208: modprobe uio
12/11/2019 21:39:39 dut.10.240.176.208:
12/11/2019 21:39:39 dut.10.240.176.208: insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
12/11/2019 21:39:39 dut.10.240.176.208: insmod: ERROR: could not insert module ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko: File exists
12/11/2019 21:39:39 dut.10.240.176.208: modprobe vfio-pci
12/11/2019 21:39:39 dut.10.240.176.208:
12/11/2019 21:39:42 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.0/vendor
12/11/2019 21:39:42 dut.10.240.176.208: 0x8086
12/11/2019 21:39:42 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.0/device
12/11/2019 21:39:42 dut.10.240.176.208: 0x154c
12/11/2019 21:39:42 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.0/vendor
12/11/2019 21:39:43 dut.10.240.176.208: 0x8086
12/11/2019 21:39:43 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.0/device
12/11/2019 21:39:43 dut.10.240.176.208: 0x154c
12/11/2019 21:39:43 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.1/vendor
12/11/2019 21:39:43 dut.10.240.176.208: 0x8086
12/11/2019 21:39:43 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.1/device
12/11/2019 21:39:43 dut.10.240.176.208: 0x154c
12/11/2019 21:39:43 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.1/vendor
12/11/2019 21:39:43 dut.10.240.176.208: 0x8086
12/11/2019 21:39:43 dut.10.240.176.208: cat /sys/bus/pci/devices/0000\:81\:02.1/device
12/11/2019 21:39:43 dut.10.240.176.208: 0x154c
12/11/2019 21:39:46 TestPortRepresentor: Test Case test_port_representor_vf_mac_addr Begin
12/11/2019 21:39:46 dut.10.240.176.208:
12/11/2019 21:39:46 tester:
12/11/2019 21:39:46 dut.10.240.176.208: ./x86_64-native-linuxapp-gcc/app/testpmd --lcores 1,2 -n 4 -w 0000:81:00.0,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained
12/11/2019 21:39:46 dut.10.240.176.208: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Auto-detected process type: PRIMARY
12/11/2019 21:39:46 dut.10.240.176.208: mac_addr set 1 aa:11:22:33:44:55
12/11/2019 21:39:47 dut.10.240.176.208: EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 3C:FD:FE:B2:4B:B8
Configuring Port 1 (socket 0)
Port 1: 00:00:00:00:00:00
Configuring Port 2 (socket 0)
Port 2: 00:00:00:00:00:00
Checking link statuses...
Done
12/11/2019 21:39:47 dut.10.240.176.208: mac_addr set 2 aa:22:33:44:55:66
12/11/2019 21:39:47 dut.10.240.176.208: mac_addr set 2 aa:22:33:44:55:66
12/11/2019 21:39:47 dut.10.240.176.208: set promisc 0 off
12/11/2019 21:39:47 dut.10.240.176.208: set promisc 0 off
12/11/2019 21:39:47 dut.10.240.176.208: start
12/11/2019 21:39:48 dut.10.240.176.208: start
io packet forwarding - ports=3 - cores=1 - streams=3 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 3 streams:
RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=2/Q=0 (socket 0) peer=02:00:00:00:00:02
RX P=2/Q=0 (socket 0) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=3
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
12/11/2019 21:39:58 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.pcap1573565998.64 root@10.240.176.177:/tmp/tester/
12/11/2019 21:39:59 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.cmd1573565998.64 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:01 tester: python /tmp/tester/scapy_ens256f0.cmd1573565998.64
12/11/2019 21:40:01 tester: WARNING: No route found for IPv6 destination :: (no default route?)
packet ready for sending...
Ether(src='3c:fd:fe:b2:42:40', dst='3c:fd:fe:b2:4b:b8', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='aa:11:22:33:44:55', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='aa:22:33:44:55:66', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='00:11:22:33:44:55', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
........................................
Sent 40 packets.
12/11/2019 21:40:01 dut.10.240.176.208: show port stats all
12/11/2019 21:40:01 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 30 RX-missed: 0 RX-bytes: 1800
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:01 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 30 RX-missed: 0 RX-bytes: 1800
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:01 TestPortRepresentor: Test Case test_port_representor_vf_mac_addr Result PASSED:
12/11/2019 21:40:09 dut.10.240.176.208: quit
12/11/2019 21:40:09 dut.10.240.176.208: quit
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 10 RX-dropped: 0 RX-total: 10
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 10 TX-total: 10
----------------------------------------------------------------------------
---------------------- Forward statistics for port 2 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 10 RX-dropped: 0 RX-total: 10
TX-packets: 0 TX-dropped: 10 TX-total: 10
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Bye...
12/11/2019 21:40:12 TestPortRepresentor: Test Case test_port_representor_vf_promiscous Begin
12/11/2019 21:40:12 dut.10.240.176.208:
12/11/2019 21:40:12 tester:
12/11/2019 21:40:12 dut.10.240.176.208: ./x86_64-native-linuxapp-gcc/app/testpmd --lcores 1,2 -n 4 -w 0000:81:00.0,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained
12/11/2019 21:40:12 dut.10.240.176.208: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Auto-detected process type: PRIMARY
12/11/2019 21:40:12 dut.10.240.176.208: set promisc 0 off
12/11/2019 21:40:14 dut.10.240.176.208: EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 3C:FD:FE:B2:4B:B8
Configuring Port 1 (socket 0)
Port 1: 00:00:00:00:00:00
Configuring Port 2 (socket 0)
Port 2: 00:00:00:00:00:00
Checking link statuses...
Done
12/11/2019 21:40:14 dut.10.240.176.208: start
12/11/2019 21:40:14 dut.10.240.176.208: start
io packet forwarding - ports=3 - cores=1 - streams=3 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 3 streams:
RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=2/Q=0 (socket 0) peer=02:00:00:00:00:02
RX P=2/Q=0 (socket 0) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=3
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
12/11/2019 21:40:25 dut.10.240.176.208: set promisc 1 on
12/11/2019 21:40:25 dut.10.240.176.208: set promisc 1 on
12/11/2019 21:40:25 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.pcap1573566025.36 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:26 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.cmd1573566025.36 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:27 tester: python /tmp/tester/scapy_ens256f0.cmd1573566025.36
12/11/2019 21:40:28 tester: WARNING: No route found for IPv6 destination :: (no default route?)
packet ready for sending...
Ether(src='3c:fd:fe:b2:42:40', dst='3c:fd:fe:b2:4b:b8', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='da:20:52:b0:1a:e0', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='da:41:51:9e:7b:ec', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='00:11:22:33:44:55', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
........................................
Sent 40 packets.
12/11/2019 21:40:28 dut.10.240.176.208: show port stats all
12/11/2019 21:40:28 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 50 RX-missed: 0 RX-bytes: 3000
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:28 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 50 RX-missed: 0 RX-bytes: 3000
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:28 dut.10.240.176.208: clear vf stats 0 0
12/11/2019 21:40:28 dut.10.240.176.208: clear vf stats 0 0
12/11/2019 21:40:28 dut.10.240.176.208: clear vf stats 0 1
12/11/2019 21:40:28 dut.10.240.176.208: clear vf stats 0 1
12/11/2019 21:40:28 dut.10.240.176.208: clear port stats all
12/11/2019 21:40:28 dut.10.240.176.208: clear port stats all
NIC statistics for port 0 cleared
NIC statistics for port 1 cleared
NIC statistics for port 2 cleared
12/11/2019 21:40:29 dut.10.240.176.208: set promisc 1 off
12/11/2019 21:40:29 dut.10.240.176.208: set promisc 1 off
12/11/2019 21:40:29 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.pcap1573566029.55 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:30 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.cmd1573566029.55 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:32 tester: python /tmp/tester/scapy_ens256f0.cmd1573566029.55
12/11/2019 21:40:32 tester: WARNING: No route found for IPv6 destination :: (no default route?)
packet ready for sending...
Ether(src='3c:fd:fe:b2:42:40', dst='3c:fd:fe:b2:4b:b8', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='da:20:52:b0:1a:e0', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='da:41:51:9e:7b:ec', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='00:11:22:33:44:55', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
........................................
Sent 40 packets.
12/11/2019 21:40:32 dut.10.240.176.208: show port stats all
12/11/2019 21:40:32 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 40 RX-missed: 0 RX-bytes: 2400
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:32 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 40 RX-missed: 0 RX-bytes: 2400
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 20 RX-missed: 0 RX-bytes: 1200
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:32 TestPortRepresentor: Test Case test_port_representor_vf_promiscous Result PASSED:
12/11/2019 21:40:40 dut.10.240.176.208: quit
12/11/2019 21:40:40 dut.10.240.176.208: quit
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 10 RX-dropped: 0 RX-total: 10
TX-packets: 10 TX-dropped: 0 TX-total: 10
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 20 TX-total: 20
----------------------------------------------------------------------------
---------------------- Forward statistics for port 2 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 10 RX-dropped: 0 RX-total: 10
TX-packets: 10 TX-dropped: 20 TX-total: 30
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Bye...
12/11/2019 21:40:43 TestPortRepresentor: Test Case test_port_representor_vf_stats_show_and_clear Begin
12/11/2019 21:40:43 dut.10.240.176.208:
12/11/2019 21:40:43 tester:
12/11/2019 21:40:43 dut.10.240.176.208: ./x86_64-native-linuxapp-gcc/app/testpmd --lcores 1,2 -n 4 -w 0000:81:00.0,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained
12/11/2019 21:40:43 dut.10.240.176.208: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Auto-detected process type: PRIMARY
12/11/2019 21:40:43 dut.10.240.176.208: set promisc 0 off
12/11/2019 21:40:45 dut.10.240.176.208: EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 3C:FD:FE:B2:4B:B8
Configuring Port 1 (socket 0)
Port 1: 00:00:00:00:00:00
Configuring Port 2 (socket 0)
Port 2: 00:00:00:00:00:00
Checking link statuses...
Done
12/11/2019 21:40:45 dut.10.240.176.208: start
12/11/2019 21:40:45 dut.10.240.176.208: start
io packet forwarding - ports=3 - cores=1 - streams=3 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 3 streams:
RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=2/Q=0 (socket 0) peer=02:00:00:00:00:02
RX P=2/Q=0 (socket 0) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=3
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
12/11/2019 21:40:56 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.pcap1573566056.23 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:57 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.cmd1573566056.23 root@10.240.176.177:/tmp/tester/
12/11/2019 21:40:58 tester: python /tmp/tester/scapy_ens256f0.cmd1573566056.23
12/11/2019 21:40:59 tester: WARNING: No route found for IPv6 destination :: (no default route?)
packet ready for sending...
Ether(src='3c:fd:fe:b2:42:40', dst='3c:fd:fe:b2:4b:b8', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='c2:77:a6:bb:7a:14', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='96:d4:15:33:da:9c', type=2048)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
..............................
Sent 30 packets.
12/11/2019 21:40:59 dut.10.240.176.208: show port stats all
12/11/2019 21:40:59 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 30 RX-missed: 0 RX-bytes: 1800
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:59 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 30 RX-missed: 0 RX-bytes: 1800
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:40:59 dut.10.240.176.208: clear vf stats 0 0
12/11/2019 21:40:59 dut.10.240.176.208: clear vf stats 0 0
12/11/2019 21:40:59 dut.10.240.176.208: clear vf stats 0 1
12/11/2019 21:40:59 dut.10.240.176.208: clear vf stats 0 1
12/11/2019 21:40:59 dut.10.240.176.208: clear port stats all
12/11/2019 21:40:59 dut.10.240.176.208: clear port stats all
NIC statistics for port 0 cleared
NIC statistics for port 1 cleared
NIC statistics for port 2 cleared
12/11/2019 21:41:00 dut.10.240.176.208: show port stats all
12/11/2019 21:41:00 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:41:00 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 0 RX-missed: 0 RX-bytes: 0
RX-errors: 0
RX-nombuf: 0
TX-packets: 0 TX-errors: 0 TX-bytes: 0
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:41:00 TestPortRepresentor: Test Case test_port_representor_vf_stats_show_and_clear Result PASSED:
12/11/2019 21:41:08 dut.10.240.176.208: quit
12/11/2019 21:41:08 dut.10.240.176.208: quit
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 10 TX-total: 10
----------------------------------------------------------------------------
---------------------- Forward statistics for port 2 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 10 TX-total: 10
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Bye...
12/11/2019 21:41:11 TestPortRepresentor: Test Case test_port_representor_vlan_filter Begin
12/11/2019 21:41:11 dut.10.240.176.208:
12/11/2019 21:41:11 tester:
12/11/2019 21:41:11 dut.10.240.176.208: ./x86_64-native-linuxapp-gcc/app/testpmd --lcores 1,2 -n 4 -w 0000:81:00.0,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained
12/11/2019 21:41:11 dut.10.240.176.208: EAL: Detected 88 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: Auto-detected process type: PRIMARY
12/11/2019 21:41:11 dut.10.240.176.208: set promisc 1 off
12/11/2019 21:41:13 dut.10.240.176.208: EAL: Selected IOVA mode 'PA'
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
Interactive-mode selected
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=155456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=155456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 1)
Port 0: 3C:FD:FE:B2:4B:B8
Configuring Port 1 (socket 0)
Port 1: 00:00:00:00:00:00
Configuring Port 2 (socket 0)
Port 2: 00:00:00:00:00:00
Checking link statuses...
Done
12/11/2019 21:41:13 dut.10.240.176.208: vlan set filter on 1
12/11/2019 21:41:13 dut.10.240.176.208: vlan set filter on 1
12/11/2019 21:41:13 dut.10.240.176.208: rx_vlan add 3 1
12/11/2019 21:41:13 dut.10.240.176.208: rx_vlan add 3 1
12/11/2019 21:41:13 dut.10.240.176.208: set promisc 2 off
12/11/2019 21:41:13 dut.10.240.176.208: set promisc 2 off
12/11/2019 21:41:13 dut.10.240.176.208: vlan set filter on 2
12/11/2019 21:41:13 dut.10.240.176.208: vlan set filter on 2
12/11/2019 21:41:13 dut.10.240.176.208: rx_vlan add 4 2
12/11/2019 21:41:13 dut.10.240.176.208: rx_vlan add 4 2
12/11/2019 21:41:13 dut.10.240.176.208: start
12/11/2019 21:41:13 dut.10.240.176.208: start
io packet forwarding - ports=3 - cores=1 - streams=3 - NUMA support enabled, MP allocation mode: native
Logical Core 2 (socket 0) forwards packets on 3 streams:
RX P=0/Q=0 (socket 1) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=2/Q=0 (socket 0) peer=02:00:00:00:00:02
RX P=2/Q=0 (socket 0) -> TX P=0/Q=0 (socket 1) peer=02:00:00:00:00:00
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=3
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x10000
RX queue: 0
RX desc=256 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=256 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x10000 - TX RS bit threshold=32
port 1: RX queue number: 1 Tx queue number: 1
Rx offloads=0x200 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
port 2: RX queue number: 1 Tx queue number: 1
Rx offloads=0x200 Tx offloads=0x0
RX queue: 0
RX desc=0 - RX free threshold=32
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
RX Offloads=0x0
TX queue: 0
TX desc=0 - TX free threshold=32
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
TX offloads=0x0 - TX RS bit threshold=32
12/11/2019 21:41:24 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.pcap1573566084.08 root@10.240.176.177:/tmp/tester/
12/11/2019 21:41:25 tester: scp -v /home/xiewei/dts/output/tmp/pcap/scapy_ens256f0.cmd1573566084.08 root@10.240.176.177:/tmp/tester/
12/11/2019 21:41:26 tester: python /tmp/tester/scapy_ens256f0.cmd1573566084.08
12/11/2019 21:41:26 tester: WARNING: No route found for IPv6 destination :: (no default route?)
packet ready for sending...
Ether(src='3c:fd:fe:b2:42:40', dst='7a:27:61:d1:1d:90', type=33024)/Dot1Q(vlan=3L, type=2048, id=0L, prio=0L)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
Ether(src='3c:fd:fe:b2:42:40', dst='e6:da:e2:1f:2c:52', type=33024)/Dot1Q(vlan=4L, type=2048, id=0L, prio=0L)/IP(frag=0L, src='127.0.0.1', proto=0, tos=0, dst='127.0.0.1', chksum=31975, len=20, version=4L, flags=0L, ihl=5L, ttl=64, id=1)
....................
Sent 20 packets.
12/11/2019 21:41:26 dut.10.240.176.208: show port stats all
12/11/2019 21:41:27 dut.10.240.176.208: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 40 RX-missed: 0 RX-bytes: 2400
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:41:27 TestPortRepresentor: show port stats all
######################## NIC statistics for port 0 ########################
RX-packets: 40 RX-missed: 0 RX-bytes: 2400
RX-errors: 0
RX-nombuf: 0
TX-packets: 20 TX-errors: 0 TX-bytes: 1200
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 1 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
######################## NIC statistics for port 2 ########################
RX-packets: 10 RX-missed: 0 RX-bytes: 600
RX-errors: 0
RX-nombuf: 0
TX-packets: 10 TX-errors: 0 TX-bytes: 600
Throughput (since last show)
Rx-pps: 0 Rx-bps: 0
Tx-pps: 0 Tx-bps: 0
############################################################################
12/11/2019 21:41:27 TestPortRepresentor: Test Case test_port_representor_vlan_filter Result PASSED:
12/11/2019 21:41:34 dut.10.240.176.208: quit
12/11/2019 21:41:35 dut.10.240.176.208: quit
Telling cores to stop...
Waiting for lcores to finish...
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 20 RX-dropped: 0 RX-total: 20
TX-packets: 20 TX-dropped: 0 TX-total: 20
----------------------------------------------------------------------------
---------------------- Forward statistics for port 1 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 20 TX-total: 20
----------------------------------------------------------------------------
---------------------- Forward statistics for port 2 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 0 TX-dropped: 0 TX-total: 0
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 20 RX-dropped: 0 RX-total: 20
TX-packets: 20 TX-dropped: 20 TX-total: 40
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
Stopping port 0...
Stopping ports...
Done
Stopping port 1...
Stopping ports...
Done
Stopping port 2...
Stopping ports...
Done
Shutting down port 0...
Closing ports...
Done
Shutting down port 1...
Closing ports...
Done
Shutting down port 2...
Closing ports...
Done
Bye...
12/11/2019 21:41:38 dut.10.240.176.208: kill_all: called by dut and has no prefix list.
12/11/2019 21:41:43 dut.10.240.176.208: There are some dpdk process not free hugepage
12/11/2019 21:41:43 dut.10.240.176.208: **************************************
12/11/2019 21:41:43 dut.10.240.176.208: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/989/gvfs
Output information may be incomplete.
12/11/2019 21:41:43 dut.10.240.176.208: **************************************
12/11/2019 21:41:43 dut.10.240.176.208: There are some dpdk process not free hugepage
12/11/2019 21:41:43 dut.10.240.176.208: **************************************
12/11/2019 21:41:43 dut.10.240.176.208: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/989/gvfs
Output information may be incomplete.
12/11/2019 21:41:43 dut.10.240.176.208: **************************************
12/11/2019 21:41:44 dut.10.240.176.208: There are some dpdk process not free hugepage
12/11/2019 21:41:44 dut.10.240.176.208: **************************************
12/11/2019 21:41:44 dut.10.240.176.208: lsof: WARNING: can't stat() fuse.gvfsd-fuse file system /run/user/989/gvfs
Output information may be incomplete.
12/11/2019 21:41:44 dut.10.240.176.208: **************************************
12/11/2019 21:41:48 dut.10.240.176.208: kill_all: called by dut and has no prefix list.
12/11/2019 21:41:51 dts:
TEST SUITE ENDED: TestPortRepresentor
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dts] [PATCH V1] tests/port_representor:automation of port_representor
2019-11-11 9:21 [dts] [PATCH V1] tests/port_representor:automation of port_representor Xie Wei
2019-11-12 1:54 ` Xiao, QimaiX
@ 2019-11-13 6:42 ` Ma, LihongX
1 sibling, 0 replies; 3+ messages in thread
From: Ma, LihongX @ 2019-11-13 6:42 UTC (permalink / raw)
To: Xie, WeiX, dts; +Cc: Xie, WeiX
Hi, xiewei
Same comments as below.
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xie Wei
Sent: Monday, November 11, 2019 5:21 PM
To: dts@dpdk.org
Cc: Xie, WeiX <weix.xie@intel.com>
Subject: [dts] [PATCH V1] tests/port_representor:automation of port_representor
new automation of port_representor according to test plan
Signed-off-by: Xie Wei <weix.xie@intel.com>
---
tests/TestSuite_port_representor.py | 291 ++++++++++++++++++++++++++++
1 file changed, 291 insertions(+)
create mode 100644 tests/TestSuite_port_representor.py
diff --git a/tests/TestSuite_port_representor.py b/tests/TestSuite_port_representor.py
new file mode 100644
index 0000000..eac8491
--- /dev/null
+++ b/tests/TestSuite_port_representor.py
@@ -0,0 +1,291 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Use two representor ports as the control plane to manage the two VFs,
+the control plane could change VFs behavior such as change promiscous
+mode, stats reset, etc. our statistical data information is independent
+on the control plane and data plane.
+"""
+
+import time
+import re
+
+from test_case import TestCase
+from dut import Dut
+from packet import Packet
+
+
+class TestPortRepresentor(TestCase):
+ def set_up_all(self):
+ """
+ Prerequisite steps for each test suite.
+ """
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "fortville_25g"], "NIC Unsupported: " + str(self.nic))
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+
+ self.session_secondary = self.dut.new_session()
+ self.session_third = self.dut.new_session()
+
+ localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_itf = self.tester.get_interface(localPort)
+ self.tester_mac = self.tester.get_mac(localPort)
+ self.pf_interface = self.dut.ports_info[self.dut_ports[0]]['intf']
+ self.pf_mac = self.dut.get_mac_address(0)
+ self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
+
+ self.unicast_mac = "00:11:22:33:44:55"
+
+ # This is to set up 1pf and 2vfs environment
+ # PF is bound to igb_uio, while VF is bound to vfio-pci.
#Lihong: about the driver igb_uio, before run the suite, it is have been set in framework, so I think this step is uesless
+ self.dut.send_expect("modprobe uio", "#", 70)
+ self.dut.send_expect("insmod ./" + self.target + "/kmod/igb_uio.ko", "#", 60)
+ self.dut.send_expect("modprobe vfio-pci", "#", 70)
+
+ self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], 2, "igb_uio")
+ self.two_vfs_port = self.dut.ports_info[self.dut_ports[0]]["vfs_port"]
+ try:
+ for port in self.two_vfs_port:
+ port.bind_driver(driver="vfio-pci")
+ except Exception as e:
+ self.destroy_env()
+ raise Exception(e)
+ self.vfs_pci =
+ self.dut.ports_info[self.dut_ports[0]]['sriov_vfs_pci']
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.vf_flag = 1
+
+ def destroy_env(self):
+ """
+ This is to stop testpmd and destroy 1pf and 2vfs environment.
+ """
+ if self.vf_flag == 1:
+ self.session_third.send_expect("quit", "#")
+ time.sleep(3)
+ self.session_secondary.send_expect("quit", "#")
+ time.sleep(3)
+ self.dut.send_expect("quit", "#")
+ time.sleep(3)
+ else:
+ self.dut.send_expect("quit", "#")
+ self.vf_flag = 0
+
+ def testpmd_pf(self):
# lihong: please do not use the hard core for lcores, and use the create_eal_parameters in dut to create the eal params to start testpmd
+ cmd_pf = "./%s/app/testpmd --lcores 1,2 -n 4 -w %s,representor=0-1 --proc-type auto --file-prefix testpmd-pf -- -i --port-topology=chained" % (self.target, self.pf_pci)
#lihong: the expect word is 'testpmd>'
+ return self.dut.send_expect(cmd_pf, "testpmd", 120)
+
+ def testpmd_vf0(self):
# lihong: same as before
+ cmd_vf0 = "./%s/app/testpmd --lcores 3,4 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf0 -- -i" % (self.target, self.vfs_pci[0])
+ self.out_vf0 = self.session_secondary.send_expect(cmd_vf0, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf0_mac = pattern.search(self.out_vf0).group()
+
+ def testpmd_vf1(self):
+ cmd_vf1 = "./%s/app/testpmd --lcores 5,6 -n 4 -w %s --proc-type auto --file-prefix testpmd-vf1 -- -i" % (self.target, self.vfs_pci[1])
+ self.out_vf1 = self.session_third.send_expect(cmd_vf1, "testpmd>", 120)
+ pattern = re.compile(r"(([A-Fa-f0-9]{2}:){5}[A-Fa-f0-9]{2})")
+ self.vf1_mac = pattern.search(self.out_vf1).group()
+
+ def test_port_representor_vf_stats_show_and_clear(self):
+ """
+ use control testpmd to get and clear dataplane testpmd ports Stats
+ """
+ self.testpmd_pf()
# lihong : if all testpmd should use cmd 'set promisc all off', I think you can put it in testpmd_pf/vf function.
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
#lihong: if you want use the timesleep to wait link up, you can use the interface ' wait_link_status_up' in pmdout.py
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2, pkt3]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ output_before = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_before)
+ result_before = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_before, re.S)
# lihong: some nic can not support the promisc, so I think you should modify you verify condition
+ self.verify(int(result_before[1]) == 10 and int(result_before[2]) == 10, "VF Stats show error")
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
# lihong: use the unified expect word 'testpmd>'
+ output_after = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(output_after)
+ result_after = re.compile('RX-packets:\s+(.*?)\s+?').findall(output_after, re.S)
+ self.verify(int(result_after[1]) == 0 and int(result_after[2])
+ == 0, "VF Stats clear error")
+
+ def test_port_representor_vf_promiscous(self):
+ """
+ use control testpmd to enable/disable dataplane testpmd ports promiscous mode
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # vf promiscous enable
+ self.dut.send_expect("set promisc 1 on", "testpmd>")
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_enable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_enable)
+ result_enable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_enable, re.S)
+ self.verify(int(result_enable[1]) == 20 and
+ int(result_enable[2]) == 20, "VFs receive packets error")
+
+ # clear port stats in control testpmd
+ self.dut.send_expect("clear vf stats 0 0", "testpmd", 2)
+ self.dut.send_expect("clear vf stats 0 1", "testpmd", 2)
+ self.dut.send_expect("clear port stats all", "testpmd", 2)
+ time.sleep(1)
+
+ # vf promiscous disable
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ out_disable = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out_disable)
+ result_disable = re.compile('RX-packets:\s+(.*?)\s+?').findall(out_disable, re.S)
+ self.verify(int(result_disable[1]) == 10 and
+ int(result_disable[2]) == 20, "VFs receive packets error")
+
+ def test_port_representor_vf_mac_addr(self):
+ """
+ use control testpmd to set vf mac address
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("mac_addr set 1 aa:11:22:33:44:55", "testpmd>")
+ self.dut.send_expect("mac_addr set 2 aa:22:33:44:55:66", "testpmd>")
+ self.dut.send_expect("set promisc 0 off", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("set promisc 0 off", "testpmd>")
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("set promisc 0 off", "testpmd>")
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def test_port_representor_vlan_filter(self):
+ """
+ use control testpmd to set vlan
+ """
+ self.testpmd_pf()
+ self.dut.send_expect("set promisc 1 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 1", "testpmd>")
+ self.dut.send_expect("rx_vlan add 3 1", "testpmd>")
+ self.dut.send_expect("set promisc 2 off", "testpmd>")
+ self.dut.send_expect("vlan set filter on 2", "testpmd>")
+ self.dut.send_expect("rx_vlan add 4 2", "testpmd>")
+ self.dut.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf0()
+ self.session_secondary.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+ self.testpmd_vf1()
+ self.session_third.send_expect("start", "testpmd>", 2)
+ time.sleep(2)
+
+ # check port stats in control testpmd
+ pkt1 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=3)/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=4)/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+
+ out = self.dut.send_expect("show port stats all", "testpmd")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.destroy_env()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
+ self.dut.close_session(self.session_secondary)
+ self.dut.close_session(self.session_third)
--
2.17.2
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-11-13 6:42 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-11 9:21 [dts] [PATCH V1] tests/port_representor:automation of port_representor Xie Wei
2019-11-12 1:54 ` Xiao, QimaiX
2019-11-13 6:42 ` Ma, LihongX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).