From: "Peng, Yuan" <yuan.peng@intel.com>
To: "Zeng, XiaoxiaoX" <xiaoxiaox.zeng@intel.com>,
"dts@dpdk.org" <dts@dpdk.org>
Cc: "Zeng, XiaoxiaoX" <xiaoxiaox.zeng@intel.com>
Subject: Re: [dts] [PATCH V1] tests/flow_filtering: automation of flow_filtering
Date: Thu, 24 Oct 2019 06:50:56 +0000 [thread overview]
Message-ID: <67D543A150B29E4CAAE53918F64EDAEA37781512@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20191024184851.30631-1-xiaoxiaox.zeng@intel.com>
Acked-by: Peng, Yuan <yuan.peng@intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Xiaoxiao Zeng
Sent: Friday, October 25, 2019 2:49 AM
To: dts@dpdk.org
Cc: Zeng, XiaoxiaoX <xiaoxiaox.zeng@intel.com>
Subject: [dts] [PATCH V1] tests/flow_filtering: automation of flow_filtering
*.add automation scripts according to flow_filtering test plan
Signed-off-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
---
tests/TestSuite_flow_filtering.py | 110 ++++++++++++++++++++++++++++++
1 file changed, 110 insertions(+)
create mode 100644 tests/TestSuite_flow_filtering.py
diff --git a/tests/TestSuite_flow_filtering.py b/tests/TestSuite_flow_filtering.py
new file mode 100644
index 0000000..60511dc
--- /dev/null
+++ b/tests/TestSuite_flow_filtering.py
@@ -0,0 +1,110 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import os
+import utils
+import time
+import re
+import os
+from test_case import TestCase
+from settings import HEADER_SIZE
+
+
+class TestFlowFiltering(TestCase):
+
+ def set_up_all(self):
+ """
+ Run before each test suite
+ """
+ # initialize ports topology
+ self.dut_ports = self.dut.get_ports(self.nic)
+ # Verify that enough ports are available
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports for testing")
+ self.dut.send_expect("export RTE_SDK=`pwd`", "#")
+ out = self.dut.build_dpdk_apps("./examples/flow_filtering/")
+ self.verify('Error' not in out, "Compilation failed")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.dts_mac = self.dut.get_mac_address(self.dut_ports[0])
+ self.dut.send_expect("./examples/flow_filtering/build/flow -l 1
+ -n 1", "initializing port", 100)
+
+
+ def send_packet(self, pkg):
+ """
+ Send packets according to parameters.
+ """
+ txitf =
+ self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]
+ ))
+
+ self.tester.scapy_foreground()
+ self.tester.scapy_append('sendp(%s, iface="%s")' % (pkg, txitf))
+ self.tester.scapy_execute()
+ time.sleep(3)
+
+ def check_flow_queue(self):
+ '''
+ Get dut flow result
+ '''
+ result = self.dut.get_session_output()
+ self.verify("queue" in result, "Dut receive flow failed!")
+ queue_result = re.findall(r"queue=(\S+)", result)
+ return queue_result
+
+ def test_flow_filtering_match_rule(self):
+
+ pkg_list = ['Ether(dst="%s")/IP(src="0.0.0.0", dst="192.168.1.1")/Raw("x"*20)' % self.dts_mac,
+ 'Ether(dst="%s")/IP(src="0.0.0.1", dst="192.168.1.1")/Raw("x"*20)' % self.dts_mac]
+ for pkg in pkg_list:
+ self.send_packet(pkg)
+
+ queue_list = self.check_flow_queue()
+ self.verify(len(queue_list) == 2, "Dut receive flow queue error!")
+ self.verify(queue_list[0] == queue_list[1] and queue_list[0] ==
+ "0x1", "Flow filter not match rule!")
+
+ def test_flow_filtering_dismatch_rule(self):
+ pkg = 'Ether(dst="%s")/IP(src="0.0.0.0", dst="192.168.1.2")/Raw("x"*20)' % self.dts_mac
+ self.send_packet(pkg)
+ queue_list = self.check_flow_queue()
+ self.verify(len(queue_list) == 1 and queue_list[0] == "0x0",
+ "Dismatch rule failed!")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.send_expect("^C", "#")
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.0
next prev parent reply other threads:[~2019-10-24 6:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 18:48 Xiaoxiao Zeng
2019-10-24 6:50 ` Peng, Yuan [this message]
2019-10-25 1:47 ` Ma, LihongX
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67D543A150B29E4CAAE53918F64EDAEA37781512@SHSMSX103.ccr.corp.intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
--cc=xiaoxiaox.zeng@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).