From: "Peng, Yuan" <yuan.peng@intel.com>
To: "Zhao, XinfengX" <xinfengx.zhao@intel.com>,
"dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhao, XinfengX" <xinfengx.zhao@intel.com>,
"Peng, Yuan" <yuan.peng@intel.com>
Subject: Re: [dts] [PATCH V1 1/2] test_plans/metering_and_policing: modify the test command for softnic
Date: Wed, 11 Dec 2019 03:10:55 +0000 [thread overview]
Message-ID: <67D543A150B29E4CAAE53918F64EDAEA377B1EE8@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1575591901-198081-1-git-send-email-xinfengx.zhao@intel.com>
Acked-by Peng, Yuan <yuan.peng@intel.com>
-----Original Message-----
From: dts <dts-bounces@dpdk.org> On Behalf Of Xinfeng Zhao
Sent: Friday, December 6, 2019 8:25 AM
To: dts@dpdk.org
Cc: Zhao, XinfengX <xinfengx.zhao@intel.com>
Subject: [dts] [PATCH V1 1/2] test_plans/metering_and_policing: modify the test command for softnic
Signed-off-by: Xinfeng Zhao <xinfengx.zhao@intel.com>
---
.../metering_and_policing_test_plan.rst | 32 +++++++++----------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/test_plans/metering_and_policing_test_plan.rst b/test_plans/metering_and_policing_test_plan.rst
index 9e41fad..95648f7 100644
--- a/test_plans/metering_and_policing_test_plan.rst
+++ b/test_plans/metering_and_policing_test_plan.rst
@@ -145,8 +145,8 @@ Bind them to dpdk igb_uio driver,
::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
- --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli,cpu_id=1,conn_port=8086' \
- -- -i --forward-mode=softnic --portmask=0x10
+ --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
+ -- -i --portmask=0x10 --disable-rss
testpmd> start
3. start softnic with default hierarchy Qos with following command line, @@ -154,8 +154,8 @@ Bind them to dpdk igb_uio driver,
::
./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 \
- --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli,cpu_id=1,conn_port=8086' \
- -- -i --forward-mode=softnic --portmask=0x10
+ --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
+ -- -i --portmask=0x10 --disable-rss
testpmd> set port tm hierarchy default 1
testpmd> start
@@ -173,7 +173,7 @@ Test Case 1: ipv4 ACL table RFC2698 GYR
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
@@ -225,7 +225,7 @@ Test Case 2: ipv4 ACL table RFC2698 GYD
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -273,7 +273,7 @@ Test Case 3: ipv4 ACL table RFC2698 GDR
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -324,7 +324,7 @@ Test Case 4: ipv4 ACL table RFC2698 DYR
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -374,7 +374,7 @@ Test Case 5: ipv4 ACL table RFC2698 DDD
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -421,7 +421,7 @@ Test Case 6: ipv4 with same CBS and PBS GDR
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -461,7 +461,7 @@ Test Case 7: ipv4 HASH table RFC2698
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table,
::
@@ -496,7 +496,7 @@ Test Case 8: ipv6 ACL table RFC2698
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table,
::
@@ -548,7 +548,7 @@ Test Case 9: multiple meter and profile
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=4 --txq=4 --portmask=0x10
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -s 0x10 -n 4
+ --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=4 --txq=4 --portmask=0x10 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -643,7 +643,7 @@ Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -730,7 +730,7 @@ Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
@@ -819,7 +819,7 @@ Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table
::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli,cpu_id=0,conn_port=8086' -- -i --forward-mode=softnic --rxq=2 --txq=2 --portmask=0x4
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7 -s 0x4 -n 4 --vdev
+ 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_polici
+ ng_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
::
--
2.17.1
next prev parent reply other threads:[~2019-12-11 3:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-06 0:25 Xinfeng Zhao
2019-12-06 0:25 ` [dts] [PATCH V1 2/2] tests/metering_and_policing: " Xinfeng Zhao
2019-12-09 5:13 ` Zhao, XinfengX
2019-12-11 3:11 ` Peng, Yuan
2019-12-11 3:10 ` Peng, Yuan [this message]
2019-12-19 7:48 ` [dts] [PATCH V1 1/2] test_plans/metering_and_policing: " Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67D543A150B29E4CAAE53918F64EDAEA377B1EE8@SHSMSX103.ccr.corp.intel.com \
--to=yuan.peng@intel.com \
--cc=dts@dpdk.org \
--cc=xinfengx.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).