From: "Wu, ChangqingX" <changqingx.wu@intel.com>
To: "dts@dpdk.org" <dts@dpdk.org>
Cc: "Zhang, Yuwei1" <yuwei1.zhang@intel.com>
Subject: Re: [dts] [PATCH V2] tests:add new test suite about interrupt pmd
Date: Mon, 19 Aug 2019 03:19:56 +0000 [thread overview]
Message-ID: <7F81DD3887C58F49A6B2EFEC3C28E22E0B745D06@SHSMSX101.ccr.corp.intel.com> (raw)
In-Reply-To: <1566184807-9656-1-git-send-email-changqingx.wu@intel.com>
Would you help ack it?
-----Original Message-----
From: Wu, ChangqingX
Sent: Monday, August 19, 2019 11:20 AM
To: dts@dpdk.org
Cc: Wu, ChangqingX <changqingx.wu@intel.com>
Subject: [dts][PATCH V2] tests:add new test suite about interrupt pmd
this test case for driver vfio_pci
Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
tests/TestSuite_interrupt_pmd.py | 128 +++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
create mode 100644 tests/TestSuite_interrupt_pmd.py
diff --git a/tests/TestSuite_interrupt_pmd.py b/tests/TestSuite_interrupt_pmd.py
new file mode 100644
index 0000000..0aa0b95
--- /dev/null
+++ b/tests/TestSuite_interrupt_pmd.py
@@ -0,0 +1,128 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+"""
+DPDK Test suite.
+Test interrupt pmd.
+"""
+
+import string
+import time
+import utils
+from test_case import TestCase
+
+
+class TestInterruptPmd(TestCase):
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+ """
+
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
+ cores = self.dut.get_core_list("1S/4C/1T")
+ self.coremask = utils.create_mask(cores)
+
+ self.path = "./examples/l3fwd-power/build/l3fwd-power"
+
+ self.trafficFlow = {
+ "Flow1": [[0, 0, 1], [1, 0, 2]],
+ "Flow2": [[0, 0, 0], [0, 1, 1], [0, 2, 2], [0, 3, 3], [0, 4, 4]],
+ "Flow3": [[0, 0, 0], [0, 1, 1], [0, 2, 2], [0, 3, 3], [0, 4, 4], [0, 5, 5], [0, 6, 6], [0, 7, 7],
+ [1, 0, 8], [1, 1, 9], [1, 2, 10], [1, 3, 11], [1, 4, 12], [1, 5, 13], [1, 6, 14]],
+ }
+ # build sample app
+ out = self.dut.build_dpdk_apps("./examples/l3fwd-power")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def test_different_queue(self):
+ cmd = "%s -c %s -n 4 -- -p 0x3 -P --config='(0,0,1),(1,0,2)' "% (self.path, self.coremask)
+ self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+ portQueueLcore = self.trafficFlow["Flow1"]
+ self.verifier_result(2, 2, portQueueLcore)
+
+ self.dut.kill_all()
+ cmd = "%s -c 0x3f -n 4 -- -p 0x3 -P --config='(0,0,0),(0,1,1),(0,2,2),(0,3,3),(0,4,4)' "% self.path
+ self.dut.send_expect(cmd, "L3FWD_POWER", 120)
+ portQueueLcore = self.trafficFlow["Flow2"]
+ self.verifier_result(20, 1, portQueueLcore)
+
+ self.dut.kill_all()
+ cmd = "%s -c 0xffffff -n 4 -- -p 0x3 -P --config='(0,0,0),(0,1,1),(0,2,2),(0,3,3),\
+ (0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),(1,1,9),(1,2,10),(1,3,11),\
+ (1,4,12),(1,5,13),(1,6,14)' "% self.path
+
+ self.dut.send_expect(cmd, "L3FWD_POWER", 60)
+ portQueueLcore = self.trafficFlow["Flow3"]
+ self.verifier_result(40, 2, portQueueLcore)
+
+ def verifier_result(self, num, portnum, portQueueLcore):
+ self.scapy_send_packet(num, portnum)
+ result = self.dut.get_session_output(timeout=5)
+ for i in range(len(portQueueLcore)):
+ lcorePort = portQueueLcore[i]
+ self.verify("FWD_POWER: lcore %d is waked up from rx interrupt on port %d queue %d" %(lcorePort[2],
+ lcorePort[0], lcorePort[1]) in result, "Wrong: lcore %d is waked up failed" % lcorePort[2])
+ self.verify("L3FWD_POWER: lcore %d sleeps until interrupt triggers" %(
+ lcorePort[2]) in result, "Wrong: lcore %d not sleeps
+ until interrupt triggers" % lcorePort[2])
+
+ def scapy_send_packet(self, num, portnum):
+ """
+ Send a packet to port
+ """
+ for i in range(len(self.dut_ports[:portnum])):
+ for j in range(num):
+ txport = self.tester.get_local_port(self.dut_ports[i])
+ mac = self.dut.get_mac_address(self.dut_ports[i])
+ txItf = self.tester.get_interface(txport)
+ self.tester.scapy_append(
+ 'sendp([Ether()/IP(dst="198.0.0.%d")/UDP()/Raw(\'X\'*18)], iface="%s")' % (j, txItf))
+ self.tester.scapy_execute()
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ pass
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.2
next prev parent reply other threads:[~2019-08-19 3:20 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-19 3:20 changqingxwu
2019-08-19 3:19 ` Wu, ChangqingX [this message]
2019-08-21 5:44 ` Zhang, Yuwei1
2019-08-28 10:23 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7F81DD3887C58F49A6B2EFEC3C28E22E0B745D06@SHSMSX101.ccr.corp.intel.com \
--to=changqingx.wu@intel.com \
--cc=dts@dpdk.org \
--cc=yuwei1.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).