* [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
@ 2019-08-16 10:04 changqingxwu
2019-08-19 3:19 ` Wu, ChangqingX
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: changqingxwu @ 2019-08-16 10:04 UTC (permalink / raw)
To: dts; +Cc: changqingxwu
Beautify format and change queue distribution for different nic
Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
test_plans/interrupt_pmd_test_plan.rst | 32 +++++++++++---------------
1 file changed, 13 insertions(+), 19 deletions(-)
diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index 8834e5f..f30951e 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -55,7 +55,7 @@ Assume generated VF PCI address will be 0000:08:10.0, 0000:08:10.1.
Iommu pass through feature has been enabled in kernel::
- intel_iommu=on iommu=pt
+ intel_iommu=on iommu=pt
Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d
in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
@@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Send one packet to Port0 and Port1, check that thread on core1 and core2
waked up::
-
- L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
- L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
Check the packet has been normally forwarded.
After the packet forwarded, thread on core1 and core 2 will return to sleep::
-
- L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
- L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
keep up awake.
Run l3fwd-power with random number queue per port, if is 4::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4)"
+ l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4)"
Send packet with increased dest IP to Port0, check that all threads waked up
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will
keep up awake.
-Run l3fwd-power with 32 queues per port::
+Run l3fwd-power with 15 queues per port::
- l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
- (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
- (0,15,15),\
- (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
- (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
- (1,13,29),(1,14,30),\(1,15,31)"
+ l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
+ (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
Send packet with increased dest IP to Port0, check that all threads waked up
@@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Plug out Port0 cable, check that link down interrupt captured and handled by
pmd driver.
--
2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-16 10:04 [dts] [PATCH V1] test_plans/interrupt:change queue for different nic changqingxwu
@ 2019-08-19 3:19 ` Wu, ChangqingX
2019-08-21 5:44 ` Zhang, Yuwei1
2019-08-28 10:15 ` Tu, Lijuan
2 siblings, 0 replies; 7+ messages in thread
From: Wu, ChangqingX @ 2019-08-19 3:19 UTC (permalink / raw)
To: dts; +Cc: Zhang, Yuwei1
Would you help ack it?
-----Original Message-----
From: Wu, ChangqingX
Sent: Friday, August 16, 2019 6:05 PM
To: dts@dpdk.org
Cc: Wu, ChangqingX <changqingx.wu@intel.com>
Subject: [dts][PATCH V1] test_plans/interrupt:change queue for different nic
Beautify format and change queue distribution for different nic
Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
test_plans/interrupt_pmd_test_plan.rst | 32 +++++++++++---------------
1 file changed, 13 insertions(+), 19 deletions(-)
diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index 8834e5f..f30951e 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -55,7 +55,7 @@ Assume generated VF PCI address will be 0000:08:10.0, 0000:08:10.1.
Iommu pass through feature has been enabled in kernel::
- intel_iommu=on iommu=pt
+ intel_iommu=on iommu=pt
Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
@@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Send one packet to Port0 and Port1, check that thread on core1 and core2 waked up::
-
- L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
- L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
Check the packet has been normally forwarded.
After the packet forwarded, thread on core1 and core 2 will return to sleep::
-
- L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
- L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will keep up awake.
Run l3fwd-power with random number queue per port, if is 4::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4)"
+ l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4)"
Send packet with increased dest IP to Port0, check that all threads waked up
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will keep up awake.
-Run l3fwd-power with 32 queues per port::
+Run l3fwd-power with 15 queues per port::
- l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
- (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
- (0,15,15),\
- (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
- (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
- (1,13,29),(1,14,30),\(1,15,31)"
+ l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
+ (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
Send packet with increased dest IP to Port0, check that all threads waked up
@@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Plug out Port0 cable, check that link down interrupt captured and handled by pmd driver.
--
2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-16 10:04 [dts] [PATCH V1] test_plans/interrupt:change queue for different nic changqingxwu
2019-08-19 3:19 ` Wu, ChangqingX
@ 2019-08-21 5:44 ` Zhang, Yuwei1
2019-08-28 10:15 ` Tu, Lijuan
2 siblings, 0 replies; 7+ messages in thread
From: Zhang, Yuwei1 @ 2019-08-21 5:44 UTC (permalink / raw)
To: Wu, ChangqingX, dts; +Cc: Wu, ChangqingX
Acked-by: Yuwei, Zhang
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of changqingxwu
Sent: Friday, August 16, 2019 6:05 PM
To: dts@dpdk.org
Cc: Wu, ChangqingX <changqingx.wu@intel.com>
Subject: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
Beautify format and change queue distribution for different nic
Signed-off-by: changqingxwu <changqingx.wu@intel.com>
---
test_plans/interrupt_pmd_test_plan.rst | 32 +++++++++++---------------
1 file changed, 13 insertions(+), 19 deletions(-)
diff --git a/test_plans/interrupt_pmd_test_plan.rst b/test_plans/interrupt_pmd_test_plan.rst
index 8834e5f..f30951e 100644
--- a/test_plans/interrupt_pmd_test_plan.rst
+++ b/test_plans/interrupt_pmd_test_plan.rst
@@ -55,7 +55,7 @@ Assume generated VF PCI address will be 0000:08:10.0, 0000:08:10.1.
Iommu pass through feature has been enabled in kernel::
- intel_iommu=on iommu=pt
+ intel_iommu=on iommu=pt
Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-d in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
@@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Send one packet to Port0 and Port1, check that thread on core1 and core2 waked up::
-
- L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
- L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
+ L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
Check the packet has been normally forwarded.
After the packet forwarded, thread on core1 and core 2 will return to sleep::
-
- L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
- L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
+ L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will keep up awake.
Run l3fwd-power with random number queue per port, if is 4::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4)"
+ l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4)"
Send packet with increased dest IP to Port0, check that all threads waked up
Send packet flows to Port0 and Port1, check that thread on core1 and core2 will keep up awake.
-Run l3fwd-power with 32 queues per port::
+Run l3fwd-power with 15 queues per port::
- l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
- (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
- (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
- (0,15,15),\
- (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
- (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
- (1,13,29),(1,14,30),\(1,15,31)"
+ l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
+ (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
+ (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
Send packet with increased dest IP to Port0, check that all threads waked up
@@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
Run l3fwd-power with one queue per port::
- l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
+ l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
Plug out Port0 cable, check that link down interrupt captured and handled by pmd driver.
--
2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-16 10:04 [dts] [PATCH V1] test_plans/interrupt:change queue for different nic changqingxwu
2019-08-19 3:19 ` Wu, ChangqingX
2019-08-21 5:44 ` Zhang, Yuwei1
@ 2019-08-28 10:15 ` Tu, Lijuan
2019-08-29 2:14 ` Wu, ChangqingX
2 siblings, 1 reply; 7+ messages in thread
From: Tu, Lijuan @ 2019-08-28 10:15 UTC (permalink / raw)
To: Wu, ChangqingX, dts; +Cc: Wu, ChangqingX
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of changqingxwu
> Sent: Friday, August 16, 2019 6:05 PM
> To: dts@dpdk.org
> Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> Subject: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
>
> Beautify format and change queue distribution for different nic
>
> Signed-off-by: changqingxwu <changqingx.wu@intel.com>
> ---
> test_plans/interrupt_pmd_test_plan.rst | 32 +++++++++++---------------
> 1 file changed, 13 insertions(+), 19 deletions(-)
>
> diff --git a/test_plans/interrupt_pmd_test_plan.rst
> b/test_plans/interrupt_pmd_test_plan.rst
> index 8834e5f..f30951e 100644
> --- a/test_plans/interrupt_pmd_test_plan.rst
> +++ b/test_plans/interrupt_pmd_test_plan.rst
> @@ -55,7 +55,7 @@ Assume generated VF PCI address will be 0000:08:10.0,
> 0000:08:10.1.
>
> Iommu pass through feature has been enabled in kernel::
>
> - intel_iommu=on iommu=pt
> + intel_iommu=on iommu=pt
>
> Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and enable vt-
> d in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
> @@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
>
> Run l3fwd-power with one queue per port::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
>
> Send one packet to Port0 and Port1, check that thread on core1 and core2
> waked up::
>
> -
> - L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> - L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
> + L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> + L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
>
> Check the packet has been normally forwarded.
>
> After the packet forwarded, thread on core1 and core 2 will return to sleep::
>
> -
> - L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> - L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
> + L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> + L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
>
> Send packet flows to Port0 and Port1, check that thread on core1 and core2
> will keep up awake.
>
> Run l3fwd-power with random number queue per port, if is 4::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
> - (0,2,2),(0,3,3),(0,4,4)"
> + l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> + (0,2,2),(0,3,3),(0,4,4)"
>
> Send packet with increased dest IP to Port0, check that all threads waked up
>
> Send packet flows to Port0 and Port1, check that thread on core1 and core2
> will keep up awake.
>
> -Run l3fwd-power with 32 queues per port::
> +Run l3fwd-power with 15 queues per port::
[Lijuan] why reduce queues from 32 to 15 ?
>
> - l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> - (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
> - (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
> - (0,15,15),\
> - (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
> - (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
> - (1,13,29),(1,14,30),\(1,15,31)"
> + l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> + (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
> + (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
>
> Send packet with increased dest IP to Port0, check that all threads waked up
>
> @@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
>
> Run l3fwd-power with one queue per port::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
>
> Plug out Port0 cable, check that link down interrupt captured and handled
> by pmd driver.
> --
> 2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-28 10:15 ` Tu, Lijuan
@ 2019-08-29 2:14 ` Wu, ChangqingX
2019-08-29 2:44 ` Tu, Lijuan
0 siblings, 1 reply; 7+ messages in thread
From: Wu, ChangqingX @ 2019-08-29 2:14 UTC (permalink / raw)
To: Tu, Lijuan, dts; +Cc: Zhang, Yuwei1
niantic net card not supports more than 15 queues by testing
-----Original Message-----
From: Tu, Lijuan
Sent: Wednesday, August 28, 2019 6:16 PM
To: Wu, ChangqingX <changqingx.wu@intel.com>; dts@dpdk.org
Cc: Wu, ChangqingX <changqingx.wu@intel.com>
Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of changqingxwu
> Sent: Friday, August 16, 2019 6:05 PM
> To: dts@dpdk.org
> Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> Subject: [dts] [PATCH V1] test_plans/interrupt:change queue for
> different nic
>
> Beautify format and change queue distribution for different nic
>
> Signed-off-by: changqingxwu <changqingx.wu@intel.com>
> ---
> test_plans/interrupt_pmd_test_plan.rst | 32
> +++++++++++---------------
> 1 file changed, 13 insertions(+), 19 deletions(-)
>
> diff --git a/test_plans/interrupt_pmd_test_plan.rst
> b/test_plans/interrupt_pmd_test_plan.rst
> index 8834e5f..f30951e 100644
> --- a/test_plans/interrupt_pmd_test_plan.rst
> +++ b/test_plans/interrupt_pmd_test_plan.rst
> @@ -55,7 +55,7 @@ Assume generated VF PCI address will be
> 0000:08:10.0, 0000:08:10.1.
>
> Iommu pass through feature has been enabled in kernel::
>
> - intel_iommu=on iommu=pt
> + intel_iommu=on iommu=pt
>
> Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and
> enable vt- d in bios. When used vfio, requested to insmod two drivers vfio and vfio-pci.
> @@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
>
> Run l3fwd-power with one queue per port::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
>
> Send one packet to Port0 and Port1, check that thread on core1 and
> core2 waked up::
>
> -
> - L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> - L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
> + L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> + L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
>
> Check the packet has been normally forwarded.
>
> After the packet forwarded, thread on core1 and core 2 will return to sleep::
>
> -
> - L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> - L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
> + L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> + L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0
> + triggers
>
> Send packet flows to Port0 and Port1, check that thread on core1 and
> core2 will keep up awake.
>
> Run l3fwd-power with random number queue per port, if is 4::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
> - (0,2,2),(0,3,3),(0,4,4)"
> + l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> + (0,2,2),(0,3,3),(0,4,4)"
>
> Send packet with increased dest IP to Port0, check that all threads
> waked up
>
> Send packet flows to Port0 and Port1, check that thread on core1 and
> core2 will keep up awake.
>
> -Run l3fwd-power with 32 queues per port::
> +Run l3fwd-power with 15 queues per port::
[Lijuan] why reduce queues from 32 to 15 ?
>
> - l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> - (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
> - (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
> - (0,15,15),\
> - (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
> - (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
> - (1,13,29),(1,14,30),\(1,15,31)"
> + l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> + (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
> + (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
>
> Send packet with increased dest IP to Port0, check that all threads
> waked up
>
> @@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
>
> Run l3fwd-power with one queue per port::
>
> - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
>
> Plug out Port0 cable, check that link down interrupt captured and
> handled by pmd driver.
> --
> 2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-29 2:14 ` Wu, ChangqingX
@ 2019-08-29 2:44 ` Tu, Lijuan
2019-08-29 3:41 ` Wu, ChangqingX
0 siblings, 1 reply; 7+ messages in thread
From: Tu, Lijuan @ 2019-08-29 2:44 UTC (permalink / raw)
To: Wu, ChangqingX, dts; +Cc: Zhang, Yuwei1
I think the test plan should be generic, NOT specific for some NICs unless it is designed for some NICS.
If you found some NIC limitation, I suggest, you can add a note in test plan.
I think , not only Niantic support this POWER feature, also Fortville , and in future, maybe more NICS.
> -----Original Message-----
> From: Wu, ChangqingX
> Sent: Thursday, August 29, 2019 10:14 AM
> To: Tu, Lijuan <lijuan.tu@intel.com>; dts@dpdk.org
> Cc: Zhang, Yuwei1 <yuwei1.zhang@intel.com>
> Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for different
> nic
>
> niantic net card not supports more than 15 queues by testing
>
> -----Original Message-----
> From: Tu, Lijuan
> Sent: Wednesday, August 28, 2019 6:16 PM
> To: Wu, ChangqingX <changqingx.wu@intel.com>; dts@dpdk.org
> Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for different
> nic
>
>
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of changqingxwu
> > Sent: Friday, August 16, 2019 6:05 PM
> > To: dts@dpdk.org
> > Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> > Subject: [dts] [PATCH V1] test_plans/interrupt:change queue for
> > different nic
> >
> > Beautify format and change queue distribution for different nic
> >
> > Signed-off-by: changqingxwu <changqingx.wu@intel.com>
> > ---
> > test_plans/interrupt_pmd_test_plan.rst | 32
> > +++++++++++---------------
> > 1 file changed, 13 insertions(+), 19 deletions(-)
> >
> > diff --git a/test_plans/interrupt_pmd_test_plan.rst
> > b/test_plans/interrupt_pmd_test_plan.rst
> > index 8834e5f..f30951e 100644
> > --- a/test_plans/interrupt_pmd_test_plan.rst
> > +++ b/test_plans/interrupt_pmd_test_plan.rst
> > @@ -55,7 +55,7 @@ Assume generated VF PCI address will be
> > 0000:08:10.0, 0000:08:10.1.
> >
> > Iommu pass through feature has been enabled in kernel::
> >
> > - intel_iommu=on iommu=pt
> > + intel_iommu=on iommu=pt
> >
> > Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and
> > enable vt- d in bios. When used vfio, requested to insmod two drivers vfio
> and vfio-pci.
> > @@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different queue
> >
> > Run l3fwd-power with one queue per port::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> > + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> >
> > Send one packet to Port0 and Port1, check that thread on core1 and
> > core2 waked up::
> >
> > -
> > - L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> > - L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
> > + L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> > + L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
> >
> > Check the packet has been normally forwarded.
> >
> > After the packet forwarded, thread on core1 and core 2 will return to
> sleep::
> >
> > -
> > - L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> > - L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
> > + L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> > + L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0
> > + triggers
> >
> > Send packet flows to Port0 and Port1, check that thread on core1 and
> > core2 will keep up awake.
> >
> > Run l3fwd-power with random number queue per port, if is 4::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
> > - (0,2,2),(0,3,3),(0,4,4)"
> > + l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > + (0,2,2),(0,3,3),(0,4,4)"
> >
> > Send packet with increased dest IP to Port0, check that all threads
> > waked up
> >
> > Send packet flows to Port0 and Port1, check that thread on core1 and
> > core2 will keep up awake.
> >
> > -Run l3fwd-power with 32 queues per port::
> > +Run l3fwd-power with 15 queues per port::
> [Lijuan] why reduce queues from 32 to 15 ?
> >
> > - l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > - (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
> > - (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
> > - (0,15,15),\
> > - (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
> > - (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
> > - (1,13,29),(1,14,30),\(1,15,31)"
> > + l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > + (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
> > + (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
> >
> > Send packet with increased dest IP to Port0, check that all threads
> > waked up
> >
> > @@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
> >
> > Run l3fwd-power with one queue per port::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> > + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> >
> > Plug out Port0 cable, check that link down interrupt captured and
> > handled by pmd driver.
> > --
> > 2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
2019-08-29 2:44 ` Tu, Lijuan
@ 2019-08-29 3:41 ` Wu, ChangqingX
0 siblings, 0 replies; 7+ messages in thread
From: Wu, ChangqingX @ 2019-08-29 3:41 UTC (permalink / raw)
To: Tu, Lijuan, dts; +Cc: Zhang, Yuwei1
Thanks for your suggest, I will take it.
-----Original Message-----
From: Tu, Lijuan
Sent: Thursday, August 29, 2019 10:45 AM
To: Wu, ChangqingX <changqingx.wu@intel.com>; dts@dpdk.org
Cc: Zhang, Yuwei1 <yuwei1.zhang@intel.com>
Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for different nic
I think the test plan should be generic, NOT specific for some NICs unless it is designed for some NICS.
If you found some NIC limitation, I suggest, you can add a note in test plan.
I think , not only Niantic support this POWER feature, also Fortville , and in future, maybe more NICS.
> -----Original Message-----
> From: Wu, ChangqingX
> Sent: Thursday, August 29, 2019 10:14 AM
> To: Tu, Lijuan <lijuan.tu@intel.com>; dts@dpdk.org
> Cc: Zhang, Yuwei1 <yuwei1.zhang@intel.com>
> Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for
> different nic
>
> niantic net card not supports more than 15 queues by testing
>
> -----Original Message-----
> From: Tu, Lijuan
> Sent: Wednesday, August 28, 2019 6:16 PM
> To: Wu, ChangqingX <changqingx.wu@intel.com>; dts@dpdk.org
> Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> Subject: RE: [dts] [PATCH V1] test_plans/interrupt:change queue for
> different nic
>
>
>
> > -----Original Message-----
> > From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of changqingxwu
> > Sent: Friday, August 16, 2019 6:05 PM
> > To: dts@dpdk.org
> > Cc: Wu, ChangqingX <changqingx.wu@intel.com>
> > Subject: [dts] [PATCH V1] test_plans/interrupt:change queue for
> > different nic
> >
> > Beautify format and change queue distribution for different nic
> >
> > Signed-off-by: changqingxwu <changqingx.wu@intel.com>
> > ---
> > test_plans/interrupt_pmd_test_plan.rst | 32
> > +++++++++++---------------
> > 1 file changed, 13 insertions(+), 19 deletions(-)
> >
> > diff --git a/test_plans/interrupt_pmd_test_plan.rst
> > b/test_plans/interrupt_pmd_test_plan.rst
> > index 8834e5f..f30951e 100644
> > --- a/test_plans/interrupt_pmd_test_plan.rst
> > +++ b/test_plans/interrupt_pmd_test_plan.rst
> > @@ -55,7 +55,7 @@ Assume generated VF PCI address will be
> > 0000:08:10.0, 0000:08:10.1.
> >
> > Iommu pass through feature has been enabled in kernel::
> >
> > - intel_iommu=on iommu=pt
> > + intel_iommu=on iommu=pt
> >
> > Support igb_uio and vfio driver, if used vfio, kernel need 3.6+ and
> > enable vt- d in bios. When used vfio, requested to insmod two
> > drivers vfio
> and vfio-pci.
> > @@ -65,45 +65,39 @@ Test Case1: PF interrupt pmd with different
> > queue
> >
> > Run l3fwd-power with one queue per port::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> > + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> >
> > Send one packet to Port0 and Port1, check that thread on core1 and
> > core2 waked up::
> >
> > -
> > - L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> > - L3FWD_POWER: lcore 2 is waked up from rx interrupt on port1,rxq0
> > + L3FWD_POWER: lcore 1 is waked up from rx interrupt on port1,rxq0
> > + L3FWD_POWER: lcore 2 is waked up from rx interrupt on
> > + port1,rxq0
> >
> > Check the packet has been normally forwarded.
> >
> > After the packet forwarded, thread on core1 and core 2 will return
> > to
> sleep::
> >
> > -
> > - L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> > - L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0 triggers
> > + L3FWD_POWER: lcore 1 sleeps until interrupt on port0,rxq0 triggers
> > + L3FWD_POWER: lcore 2 sleeps until interrupt on port0,rxq0
> > + triggers
> >
> > Send packet flows to Port0 and Port1, check that thread on core1
> > and
> > core2 will keep up awake.
> >
> > Run l3fwd-power with random number queue per port, if is 4::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="0,0,0),(0,1,1),\
> > - (0,2,2),(0,3,3),(0,4,4)"
> > + l3fwd-power -c 0x3f -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > + (0,2,2),(0,3,3),(0,4,4)"
> >
> > Send packet with increased dest IP to Port0, check that all threads
> > waked up
> >
> > Send packet flows to Port0 and Port1, check that thread on core1
> > and
> > core2 will keep up awake.
> >
> > -Run l3fwd-power with 32 queues per port::
> > +Run l3fwd-power with 15 queues per port::
> [Lijuan] why reduce queues from 32 to 15 ?
> >
> > - l3fwd-power -c ffffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > - (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(0,8,8),
> > - (0,9,9),(0,10,10),(0,11,11),(0,12,12),(0,13,13),(0,14,14),\
> > - (0,15,15),\
> > - (1,0,16),(1,1,17),(1,2,18),(1,3,19),(1,4,20),(1,5,21),(1,6,22),\
> > - (1,7,23),(1,8,24),(1,9,25),(1,10,26),(1,11,27),(1,12,28),\
> > - (1,13,29),(1,14,30),\(1,15,31)"
> > + l3fwd-power -c ffffff -n 4 -- -p 0x3 -P --config="(0,0,0),(0,1,1),\
> > + (0,2,2),(0,3,3),(0,4,4),(0,5,5),(0,6,6),(0,7,7),(1,0,8),\
> > + (1,1,9),(1,2,10),(1,3,11),(1,4,12),(1,5,13),(1,6,14)
> >
> > Send packet with increased dest IP to Port0, check that all threads
> > waked up
> >
> > @@ -115,7 +109,7 @@ Test Case2: PF lsc interrupt with vfio
> >
> > Run l3fwd-power with one queue per port::
> >
> > - l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> > + l3fwd-power -c 7 -n 4 -- -p 0x3 -P --config="(0,0,1),(1,0,2)"
> >
> > Plug out Port0 cable, check that link down interrupt captured and
> > handled by pmd driver.
> > --
> > 2.17.2
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-08-29 3:41 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-16 10:04 [dts] [PATCH V1] test_plans/interrupt:change queue for different nic changqingxwu
2019-08-19 3:19 ` Wu, ChangqingX
2019-08-21 5:44 ` Zhang, Yuwei1
2019-08-28 10:15 ` Tu, Lijuan
2019-08-29 2:14 ` Wu, ChangqingX
2019-08-29 2:44 ` Tu, Lijuan
2019-08-29 3:41 ` Wu, ChangqingX
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).