From: "Ma, LihongX" <lihongx.ma@intel.com>
To: "Yao, BingX Y" <bingx.y.yao@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Yao, BingX Y" <bingx.y.yao@intel.com>
Subject: Re: [dts] [PATCH V2] add suite qos meter
Date: Mon, 13 Jan 2020 02:42:56 +0000 [thread overview]
Message-ID: <8321791a2b914bb3adc375444bb3e965@intel.com> (raw)
In-Reply-To: <1578883129-98603-1-git-send-email-bingx.y.yao@intel.com>
Tested-by: ma,lihong<lihongx.ma@intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of yaobing
Sent: Monday, January 13, 2020 10:39 AM
To: dts@dpdk.org
Cc: Yao, BingX Y <bingx.y.yao@intel.com>
Subject: [dts] [PATCH V2] add suite qos meter
V1: add suite
V2: change method group package
Signed-off-by: yaobing <bingx.y.yao@intel.com>
---
tests/TestSuite_qos_meter.py | 170 +++++++++++++++++++++++++++++++++++
1 file changed, 170 insertions(+)
create mode 100644 tests/TestSuite_qos_meter.py
diff --git a/tests/TestSuite_qos_meter.py b/tests/TestSuite_qos_meter.py new file mode 100644 index 0000000..062de81
--- /dev/null
+++ b/tests/TestSuite_qos_meter.py
@@ -0,0 +1,170 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019-2020> Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+DPDK Test suite.
+Test QOS API in DPDK.
+The DUT must have two 10G Ethernet ports connected to two ports of IXIA.
+"""
+import os
+from test_case import TestCase
+from settings import HEADER_SIZE
+from pktgen import TRANSMIT_CONT
+from pmd_output import PmdOutput
+from packet import Packet
+
+
+class TestQosMeter(TestCase):
+
+ def set_up_all(self):
+ """
+ ip_fragmentation Prerequisites
+ """
+ # Based on h/w type, choose how many ports to use
+ ports = self.dut.get_ports()
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.tx_port = self.tester.get_local_port(self.dut_ports[0])
+ self.rx_port = self.tester.get_local_port(self.dut_ports[1])
+ self.pmdout = PmdOutput(self.dut)
+
+ # Verify that enough ports are available
+ self.verify(len(ports) >= 2, "Insufficient ports for testing")
+
+ #get data from https://doc.dpdk.org/guides/sample_app_ug/qos_metering.html
+ self.blind_pps = 14880000
+ self.aware_pps = 13880000
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def build_app_and_send_package(self):
+ """
+ Build app and send pkt
+ return bps and pps
+ """
+ self.dut.send_expect('rm -rf ./examples/qos_meter/build', "#")
+ out = self.dut.build_dpdk_apps("./examples/qos_meter")
+ self.verify("Error" not in out, "Compilation error")
+ self.verify("No such" not in out, "Compilation error")
+ eal_params = self.dut.create_eal_parameters(cores='1S/1C/1T', fixed_prefix=True, prefix='qos_meter')
+ cmd = './examples/qos_meter/build/qos_meter ' + eal_params + '-- -p 0x3'
+ self.dut.send_expect(cmd, "TX = 1")
+ payload_size = 64 - HEADER_SIZE['eth'] - HEADER_SIZE['ip']
+ dts_mac = self.dut.get_mac_address(self.dut_ports[self.rx_port])
+ pkt = Packet(pkt_type='IP_RAW')
+ pkt.save_pcapfile(self.tester, "%s/tester.pcap" % self.tester.tmp_file)
+ stream_option = {
+ 'pcap': "%s/tester.pcap" % self.tester.tmp_file,
+ 'stream_config': {
+ 'rate': 100,
+ 'transmit_mode': TRANSMIT_CONT,
+ }
+ }
+ self.tester.pktgen.clear_streams()
+ stream_ids = []
+ stream_id = self.tester.pktgen.add_stream(self.tx_port, self.rx_port, "%s/tester.pcap" % self.tester.tmp_file)
+ self.tester.pktgen.config_stream(stream_id,stream_option)
+ stream_ids.append(stream_id)
+ stream_id = self.tester.pktgen.add_stream(self.rx_port, self.tx_port, "%s/tester.pcap" % self.tester.tmp_file)
+ self.tester.pktgen.config_stream(stream_id, stream_option)
+ stream_ids.append(stream_id)
+ traffic_opt = {
+ 'method': 'throughput',
+ 'rate': 100,
+ 'duration': 20
+ }
+ bps, pps = self.tester.pktgen.measure(stream_ids, traffic_opt)
+ return bps, pps
+
+ def verify_throughput(self, throughput, pps):
+ difference_value = throughput - pps
+ #performance data is allowed to float by 10%
+ self.verify(- pps*0.1 < difference_value < pps*0.1, "throughput
+ validation failure")
+
+ def test_perf_srTCM_blind_RED(self):
+ """
+ srTCM blind RED
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps, pps = self.build_app_and_send_package()
+ self.verify_throughput(pps, self.aware_pps)
+
+ def test_perf_srTCM_blind_GREEN(self):
+ """
+ srTCM blind GREEN
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/3/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps, pps= self.build_app_and_send_package()
+ self.verify_throughput(pps, self.blind_pps)
+
+ def test_perf_srTCM_aware_RED(self):
+ """
+ srTCM aware RED
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_SRTCM_COLOR_AWARE/2' ./examples/qos_meter/main.c", "#")
+ bps, pps= self.build_app_and_send_package()
+ self.verify_throughput(pps, self.blind_pps)
+
+ def test_perf_trTCM_blind(self):
+ """
+ trTCM blind
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_TRTCM_COLOR_BLIND/2' ./examples/qos_meter/main.c", "#")
+ bps, pps = self.build_app_and_send_package()
+ self.verify_throughput(pps, self.aware_pps)
+
+ def test_perf_trTCM_aware(self):
+ """
+ trTCM aware
+ """
+ self.dut.send_expect(r"sed -i -e '/#define APP_PKT_COLOR_POS/s/[0-9]/5/g' ./examples/qos_meter/main.c", "#")
+ self.dut.send_expect(r"sed -i -e '/^#define APP_MODE /s/APP_MODE_*/APP_MODE_TRTCM_COLOR_AWARE/2' ./examples/qos_meter/main.c", "#")
+ bps, pps = self.build_app_and_send_package()
+ self.verify_throughput(pps, self.blind_pps)
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
--
2.17.2
next prev parent reply other threads:[~2020-01-13 2:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-13 2:38 yaobing
2020-01-13 2:42 ` Ma, LihongX [this message]
2020-01-13 3:13 ` Tu, Lijuan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8321791a2b914bb3adc375444bb3e965@intel.com \
--to=lihongx.ma@intel.com \
--cc=bingx.y.yao@intel.com \
--cc=dts@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).