* [dts] [PATCH V3 1/4] add nvgre test for fortville NIC
@ 2015-06-16 5:32 huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 2/4] add nvgre test plan huilong,xu
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: huilong,xu @ 2015-06-16 5:32 UTC (permalink / raw)
To: dts
From: huilong xu <huilongx.xu@intel.com>
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
executions/execution_FVL.cfg | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/executions/execution_FVL.cfg b/executions/execution_FVL.cfg
index 600c693..5201420 100644
--- a/executions/execution_FVL.cfg
+++ b/executions/execution_FVL.cfg
@@ -9,7 +9,8 @@ test_suites=
vlan,
shutdown_api,
queue_start_stop,
- fdir
+ fdir,
+ nvgre
targets=
x86_64-native-linuxapp-gcc
parameters=nic_type=cfg:func=true
--
1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V3 2/4] add nvgre test plan
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
@ 2015-06-16 5:32 ` huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: huilong,xu @ 2015-06-16 5:32 UTC (permalink / raw)
To: dts
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 25319 bytes --]
From: huilong xu <huilongx.xu@intel.com>
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
test_plans/nvgre_test_plan.rst | 389 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 389 insertions(+), 0 deletions(-)
create mode 100644 test_plans/nvgre_test_plan.rst
diff --git a/test_plans/nvgre_test_plan.rst b/test_plans/nvgre_test_plan.rst
new file mode 100644
index 0000000..50993c1
--- /dev/null
+++ b/test_plans/nvgre_test_plan.rst
@@ -0,0 +1,389 @@
+.. Copyright (c) <2015>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPR ESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+================
+ Fortville NVGRE
+================
+Cloud providers build virtual network overlays over existing network
+infrastructure that provide tenant isolation and scaling. Tunneling
+layers added to the packets carry the virtual networking frames over
+existing Layer 2 and IP networks. Conceptually, this is similar to
+creating virtual private networks over the Internet. Fortville will
+process these tunneling layers by the hardware.
+
+This document provides test plan for Fortville NVGRE packet detecting,
+checksum computing and filtering.
+
+Prerequisites
+=============
+1x Intel® X710 (Fortville) NICs (2x 40GbE full duplex optical ports per NIC)
+plugged into the available PCIe Gen3 8-lane slot.
+
+1x Intel® XL710-DA4 (Eagle Fountain) (1x 10GbE full duplex optical ports per NIC)
+plugged into the avaiable PCIe Gen3 8-lane slot.
+
+DUT board must be two sockets system and each cpu have more than 8 lcores.
+
+Test Case: NVGRE ipv4 packet detect
+===================================
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Send packet as table listed and check dumped packet type the same as column
+"Rx packet type".
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+
+
+Test Case: NVGRE ipv6 packet detect
+===================================
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 2 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Send ipv6 packet as table listed and check dumped packet type the same as
+column "Rx packet type".
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Test Case: NVGRE IPv4 Filter
+========================
+This test adds NVGRE IPv4 filters to the hardware, and then checks whether
+sent packets match those filters. In order to this, the packet should first
+be sent from ``Scapy`` before the filter is created, to verify that it is not
+matched by a NVGRE IPv4 filter. The filter is then added from the ``testpmd``
+command line and the packet is sent again.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add one new NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+For example:
+ tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1
+ NVGRE imac 1 1
+
+Then send one packet and check packet was forwarded into right queue.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4 | Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Remove NVGRE filter which has been added. Then send one packet and check
+packet was received in queue 0.
+
+
+Test Case: NVGRE IPv4 Filter invalid
+========================
+This test adds NVGRE IPv6 filters by invalid command, and then checks command
+result.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+Validte the filter command with wrong parameter::
+
+Add Clould filter with invalid Mac address "00:00:00:00:01" will be failed.
+
+Add Clould filter with invalid ip address "192.168.1.256" will be failed.
+
+Add Clould filter with invalid vlan "4097" will be failed.
+
+Add Clould filter with invalid vni "16777216" will be failed.
+
+Add Clould filter with invalid queue id "64" will be failed.
+
+Test Case: NVGRE IPv6 Filter
+========================
+This test adds NVGRE IPv6 filters to the hardware, and then checks whether
+sent packets match those filters. In order to this, the packet should first
+be sent from ``Scapy`` before the filter is created, to verify that it is not
+matched by a NVGRE IPv6 filter. The filter is then added from the ``testpmd``
+command line and the packet is sent again.
+
+Start testpmd::
+
+ testpmd -c 0xffff -n 4 -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2
+
+Set rxonly packet forwarding mode and enable verbose log::
+
+ set fwd rxonly
+ set verbose 1
+
+Add NVGRE filter as table listed first::
+ tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan
+ tunnel_type(vxlan|nvgre) filter_type(imac-ivlan|imac-ivlan-tenid|imac-tenid|imac
+ |omac-imac-tenid|iip) tenant_id queue_num
+
+For example:
+ tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01 192.168.2.2 1
+ NVGRE imac 1 1
+
+Then send one packet and check packet was forwarded into right queue.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6 | Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Remove NVGRE filter which has been added. Then send one packet and check
+packet was received in queue 0.
+
+Test Case: NVGRE ipv4 checksum offload
+======================================
+This test validates NVGRE IPv4 checksum by the hardware. In order to this, the packet should first
+be sent from ``Scapy`` with wrong checksum(0x00) value. Then the pmd forward package while checksum
+is modified on DUT tx port by hardware. To verify it, tcpdump captures the
+forwarded packet and checks the forwarded packet checksum correct or not.
+
+Start testpmd with tunneling packet type to NVGRE::
+
+ testpmd -c 0xffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+
+Set csum packet forwarding mode and enable verbose log::
+
+ set fwd csum
+ csum set ip hw <dut tx_port>
+ csum set udp hw <dut tx_port>
+ csum set tcp hw <dut tx_port>
+ csum set sctp hw <dut tx_port>
+ csum set nvgre hw <dut tx_port>
+ csum parse_tunnel on <dut tx_port>
+ set verbose 1
+
+Send packet with invalid checksum first. Then check forwarded packet checksum
+correct or not.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | None | None | None | None | None | PKT_RX_IPV4_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4(Bad)| Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4 | Yes | Yes | None | Ipv4(Bad)| Tcp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv4(Bad)| Yes | Yes | None | Ipv4(Bad)| Sctp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4(Bad)| Yes | Yes | None | Ipv4 | Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv4 | Yes | Yes | Yes | Ipv4(Bad)| Udp | PKT_RX_IPV4_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+Test Case: NVGRE ipv6 checksum offload
+======================================
+This test validates NVGRE IPv6 checksum by the hardware. In order to this, the packet should first
+be sent from ``Scapy`` with wrong checksum(0x00) value. Then the pmd forward package while checksum
+is modified on DUT tx port by hardware. To verify it, tcpdump captures the
+forwarded packet and checks the forwarded packet checksum correct or not.
+
+Start testpmd with tunneling packet type::
+
+ testpmd -c ffff -n 4 -- -i --rxq=4 --txq=4 --nb-cores=8 --nb-ports=2 --enable-rx-cksum
+
+Set csum packet forwarding mode and enable verbose log::
+
+ set fwd csum
+ csum set ip hw <dut tx_port>
+ csum set udp hw <dut tx_port>
+ csum set tcp hw <dut tx_port>
+ csum set sctp hw <dut tx_port>
+ csum set nvgre hw <dut tx_port>
+ csum parse_tunnel on <dut tx_port>
+ set verbose 1
+
+Send packet with invalid checksum first. Then check forwarded packet checksum
+correct or not.
+
++-----------+-----------+----------+---------+----------|-----------+----------+-----------+---------------------+-----------+
+| Outer L2 |Outer Vlan | Outer L3 | NVGRE | Inner L2 |Inner Vlan | Inner L3 | Inner L4 | Rx packet type | Pkt Error |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | None | None | None | None | None | PKT_RX_IPV6_HDR | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6(Bad)| Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6 | Yes | Yes | None | Ipv6(Bad)| Tcp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | None | Ipv6(Bad)| Yes | Yes | None | Ipv6(Bad)| Sctp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6(Bad)| Yes | Yes | None | Ipv6 | Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+| Yes | Yes | Ipv6 | Yes | Yes | Yes | Ipv6(Bad)| Udp | PKT_RX_IPV6_HDR_EXT | None |
++-----------+-----------+----------+---------+----------+-----------+----------+-----------+---------------------+-----------+
+
+
+
+Test Case: NVGRE Checksum Offload Performance Benchmarking
+==========================================================
+
+The throughput is measured for each of these cases for NVGRE tx checksum
+offload of "all by software", "inner l3 offload by hardware", "inner l4
+offload by hardware", "inner l3&l4 offload by hardware", "outer l3 offload
+by hardware", "outer l4 offload by hardware", "outer l3&l4 offload by
+hardware", "all by hardware".
+
+The results are printed in the following table:
+
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| Calculate Type | 1S/1C/1T Mpps | % linerate | 1S/1C/2T Mpps | % linerate | 1S/2C/1T Mpps | % linerate |
++================+===============+============+===============+============+===============+============+
+| SOFTWARE ALL | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L3 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW OUTER L3&L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L3 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HW INNER L3&L4 | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+| HARDWARE ALL | | | | | | |
++----------------+---------------+------------+---------------+------------+---------------+------------+
+
+Test Case: NVGRE Tunnel filter Performance Benchmarking
+=======================================================
+The throughput is measured for different NVGRE tunnel filter types.
+Queue single mean there's only one flow and forwarded to the first queue.
+Queue multi mean there're two flows and configure to different queues.
+
++--------+------------------+--------+--------+------------+
+| Packet | Filter | Queue | Mpps | % linerate |
++========+==================+========+========+============+
+| Normal | None | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | None | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | omac-imac-tenid | Single | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-ivlan-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | imac | Multi | | |
++--------+------------------+--------+--------+------------+
+| NVGRE | omac-imac-tenid | Multi | | |
++--------+------------------+--------+--------+------------+
--
1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V3 3/4] add nvgre protocol for scapy
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 2/4] add nvgre test plan huilong,xu
@ 2015-06-16 5:32 ` huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 4/4] add nvgre test code huilong,xu
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: huilong,xu @ 2015-06-16 5:32 UTC (permalink / raw)
To: dts
From: huilong xu <huilongx.xu@intel.com>
used function:
1. copy ./dep/nvgre.py to fedor layers in python install path
eg: python2.7 default path: /usr/lib/python2.7/site-packages/scapy/layers/
2. update scapy config file
add "nvgre" to vlaue "load_layers" in scapy config file.
eg: python2.7 default config file: /usr/lib/python2.7/site-packages/scapy/config.py
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
dep/nvgre.py | 33 +++++++++++++++++++++++++++++++++
1 files changed, 33 insertions(+), 0 deletions(-)
create mode 100644 dep/nvgre.py
diff --git a/dep/nvgre.py b/dep/nvgre.py
new file mode 100644
index 0000000..d844bd1
--- /dev/null
+++ b/dep/nvgre.py
@@ -0,0 +1,33 @@
+## This file is part of Scapy
+##
+## Copyright (C) Min Cao <min.cao@intel.com>
+
+"""
+NVGRE (Network Virtual GRE).
+"""
+
+from scapy.packet import *
+from scapy.fields import *
+from scapy.layers.inet import UDP,IP
+from scapy.layers.l2 import Ether
+
+IPPROTO_NVGRE=47
+
+class NVGRE(Packet):
+ name = "Network Virtual GRE"
+ fields_desc = [BitField("c", 0, 1),
+ BitField("r", 0, 1),
+ BitField("k", 1, 1),
+ BitField("s", 0, 1),
+ BitField("reserved0", 0, 9),
+ BitField("ver", 0, 3),
+ XShortField("protocoltype", 0x6558),
+ X3BytesField("TNI", 1),
+ ByteField("reserved1", 0)]
+ def mysummary(self):
+ return self.sprintf("NVGRE (tni=%NVGRE.tni%)")
+
+
+bind_layers(IP, NVGRE, proto=IPPROTO_NVGRE)
+bind_layers(NVGRE, Ether)
+
--
1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V3 4/4] add nvgre test code
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 2/4] add nvgre test plan huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
@ 2015-06-16 5:32 ` huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
2015-06-16 5:56 ` [dts] [PATCH V3 1/4] add nvgre test for fortville NIC Liu, Yong
4 siblings, 0 replies; 6+ messages in thread
From: huilong,xu @ 2015-06-16 5:32 UTC (permalink / raw)
To: dts
From: huilong xu <huilongx.xu@intel.com>
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
tests/TestSuite_nvgre.py | 997 ++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 997 insertions(+), 0 deletions(-)
create mode 100644 tests/TestSuite_nvgre.py
diff --git a/tests/TestSuite_nvgre.py b/tests/TestSuite_nvgre.py
new file mode 100644
index 0000000..62bb83b
--- /dev/null
+++ b/tests/TestSuite_nvgre.py
@@ -0,0 +1,997 @@
+"""
+DPDK Test suite.
+
+Test NVGRE features in DPDK.
+
+"""
+
+import dts
+import string
+import re
+import time
+import os
+from pmd_output import PmdOutput
+import pdb
+
+from scapy.utils import struct, socket, wrpcap, rdpcap
+from scapy.layers.inet import Ether, IP, TCP, UDP
+from scapy.layers.inet6 import IPv6
+from scapy.layers.l2 import Dot1Q
+from scapy.layers.sctp import SCTP, SCTPChunkData
+from scapy.layers.nvgre import NVGRE
+from scapy.sendrecv import sniff
+from scapy.config import conf
+from scapy.route import *
+
+from test_case import TestCase
+from settings import HEADER_SIZE
+
+#
+#
+# Test class.
+#
+
+
+class NvgreTestConfig(object):
+
+ """
+ Module for config/create/transmit Nvgre packet
+ """
+
+ def __init__(self, test_case, **kwargs):
+ self.test_case = test_case
+ self.init()
+ for name in kwargs:
+ setattr(self, name, kwargs[name])
+
+ def init(self):
+ self.packets_config()
+
+ def packets_config(self):
+ """
+ Default nvgre packet format
+ """
+ self.pcap_file = 'nvgre.pcap'
+ self.capture_file = 'capture.pcap'
+
+ """
+ outer info
+
+ Outer Ethernet Header: |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Outer) Destination MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |(Outer)Destination MAC Address | (Outer)Source MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Outer) Source MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |Optional Ethertype=C-Tag 802.1Q| Outer VLAN Tag Information |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ethertype 0x0800 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ Outer IPv4 Header:
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |Version| IHL |Type of Service| Total Length |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Identification |Flags| Fragment Offset |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Time to Live | Protocol 0x2F | Header Checksum |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Outer) Source Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Outer) Destination Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ """
+ self.outer_mac_src = '00:00:10:00:00:00'
+ self.outer_mac_dst = '11:22:33:44:55:66'
+ self.outer_vlan = 'N/A'
+
+ self.outer_ip_proto = 47
+ self.outer_l3_type = "IPv4"
+ self.outer_ip_src = '192.168.1.1'
+ self.outer_ip_dst = '192.168.1.2'
+ self.outer_ip_invalid = 0
+
+ self.outer_ip6_src = 'fe80::21e:67ff:fe56:fe44'
+ self.outer_ip6_dst = 'fe80::21e:67ff:fe56:fe45'
+ self.outer_ip6_invalid = 0
+ """
+ gre info
+ GRE Header:
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |0| |1|0| Reserved0 | Ver | Protocol Type 0x6558 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Tenant Network ID (TNI)| Reserved |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ """
+ self.tni = 1
+ self.proto = 0x6558
+
+ """
+ inner info
+ Inner Ethernet Header
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Inner) Destination MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |(Inner)Destination MAC Address | (Inner)Source MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | (Inner) Source MAC Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |Optional Ethertype=C-Tag 802.1Q| PCP |0| VID set to 0 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Ethertype 0x0800 |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ Inner IPv4 Header:
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ |Version| IHL |Type of Service| Total Length |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Identification |Flags| Fragment Offset |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Time to Live | Protocol | Header Checksum |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Source Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Destination Address |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Options | Padding |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ | Original IP Payload |
+ | |
+ | |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ """
+ self.inner_mac_src = '90:e2:ba:4a:34:88'
+ self.inner_mac_dst = '90:e2:ba:4a:34:89'
+ self.inner_vlan = 'N/A'
+
+ self.inner_l3_type = "IPv4"
+ self.inner_ip_src = '192.168.2.1'
+ self.inner_ip_dst = '192.168.2.2'
+ self.inner_ip_invalid = 0
+
+ self.inner_ip6_src = 'fe80::92e2:baff:fe4a:5548'
+ self.inner_ip6_dst = 'fe80::92e2:baff:fe4a:5549'
+ self.inner_ip6_invalid = 0
+
+ self.inner_l4_type = 'UDP'
+ self.inner_l4_invalid = 0
+ self.payload_size = 18
+
+ def packet_type(self):
+ """
+ Return nvgre packet type
+ """
+ if self.outer_ip_proto != 47:
+ if self.outer_l3_type == 'IPv4':
+ return 'PKT_RX_IPV4_HDR'
+ else:
+ return 'PKT_RX_IPV6_HDR'
+ else:
+ if self.outer_l3_type == 'IPv4':
+ return 'PKT_RX_TUNNEL_IPV4_HDR'
+ else:
+ return 'PKT_RX_TUNNEL_IPV6_HDR'
+
+ def create_pcap(self, scp=True):
+ """
+ Create pcap file and copy it to tester if configured
+ Return scapy packet object for later usage
+ """
+
+ """
+ inner package = L2/[Vlan]/L3/L4/Payload
+ """
+ if self.inner_l4_type == 'SCTP':
+ self.inner_payload = SCTPChunkData(data='X' * 16)
+ else:
+ self.inner_payload = ("X" * self.payload_size)
+
+ if self.inner_l4_type == 'TCP':
+ inner_l4 = TCP()
+ elif self.inner_l4_type == 'UDP':
+ inner_l4 = UDP()
+ elif self.inner_l4_type == 'SCTP':
+ inner_l4 = SCTP()
+
+ if self.inner_l3_type == 'IPv4':
+ inner_l3 = IP()
+ else:
+ inner_l3 = IPv6()
+
+ if self.inner_vlan != 'N/A':
+ inner = Ether() / Dot1Q() / inner_l3 / inner_l4 / self.inner_payload
+ inner[Dot1Q].vlan = self.inner_vlan
+ else:
+ if self.inner_l4_type == "None":
+ inner = Ether() / inner_l3 / self.inner_payload
+ else:
+ inner = Ether() / inner_l3 / inner_l4 / self.inner_payload
+
+ inner[Ether].src = self.inner_mac_src
+ inner[Ether].dst = self.inner_mac_dst
+
+ if self.inner_l3_type == 'IPv4':
+ inner[inner_l3.name].src = self.inner_ip_src
+ inner[inner_l3.name].dst = self.inner_ip_dst
+ else:
+ inner[inner_l3.name].src = self.inner_ip6_src
+ inner[inner_l3.name].dst = self.inner_ip6_dst
+
+ if self.inner_l4_type == "UDP" or self.inner_l4_type == "TCP":
+ inner[inner_l4.name].dport = 1021
+ inner[inner_l4.name].sport = 1021
+
+ if self.inner_l3_type == 'IPv4' and self.inner_ip_invalid == 1:
+ inner[inner_l3.name].chksum = 0x1234
+
+ if self.inner_l4_invalid == 1:
+ if self.inner_l4_type == 'SCTP':
+ inner[SCTP].chksum = 0
+ elif self.inner_l4_type == "UDP" or self.inner_l4_type == "TCP":
+ inner[self.inner_l4_type].chksum = 0x1234
+
+ """
+ Outer package = L2/[Vlan]/L3
+ """
+ if self.outer_l3_type == 'IPv4':
+ outer_l3 = IP()
+ else:
+ outer_l3 = IPv6()
+
+ if self.outer_vlan != 'N/A':
+ outer = Ether() / Dot1Q() / outer_l3
+ outer[Dot1Q].vlan = self.outer_vlan
+ else:
+ outer = Ether() / outer_l3
+
+ outer[Ether].src = self.outer_mac_src
+ outer[Ether].dst = self.outer_mac_dst
+
+ if self.outer_l3_type == 'IPv4':
+ outer[outer_l3.name].src = self.outer_ip_src
+ outer[outer_l3.name].dst = self.outer_ip_dst
+ outer[outer_l3.name].proto = self.outer_ip_proto
+ else:
+ outer[outer_l3.name].src = self.outer_ip6_src
+ outer[outer_l3.name].dst = self.outer_ip6_dst
+ outer[outer_l3.name].nh = self.outer_ip_proto
+
+ if self.outer_l3_type == 'IPv4' and self.outer_ip_invalid == 1:
+ outer[outer_l3.name].chksum = 0x1234
+
+ """
+ GRE package: outer/GRE header/inner
+ """
+ if self.outer_ip_proto == 47:
+ self.pkt = outer / NVGRE() / inner
+ else:
+ self.pkt = outer / ("X" * self.payload_size)
+
+ if scp is True:
+ wrpcap(self.pcap_file, self.pkt)
+ self.test_case.tester.session.copy_file_to(self.pcap_file)
+
+ return self.pkt
+
+ def get_chksums(self, pcap=None, tester=False):
+
+ chk_sums = {}
+ if pcap is None:
+ if tester is True:
+ self.test_case.tester.session.copy_file_from(self.pcap_file)
+ pkts = rdpcap(self.pcap_file)
+ else:
+ if tester is True:
+ self.test_case.tester.session.copy_file_from(pcap)
+ pkts = rdpcap(pcap)
+
+ time.sleep(1)
+
+ if pkts[0].guess_payload_class(pkts[0]).name == "IP":
+ chk_sums['outer_ip'] = hex(pkts[0][IP].chksum)
+
+ if pkts[0].haslayer(NVGRE) is True:
+ inner = pkts[0][NVGRE]
+ if inner.haslayer(IP) is True:
+ chk_sums['inner_ip'] = hex(inner[IP].chksum)
+ if inner[IP].proto == 6:
+ chk_sums['inner_tcp'] = hex(inner[TCP].chksum)
+ if inner[IP].proto == 17:
+ chk_sums['inner_udp'] = hex(inner[UDP].chksum)
+ if inner[IP].proto == 132:
+ chk_sums['inner_sctp'] = hex(inner[SCTP].chksum)
+ elif inner.haslayer(IPv6) is True:
+ if inner[IPv6].nh == 6:
+ chk_sums['inner_tcp'] = hex(inner[TCP].chksum)
+ if inner[IPv6].nh == 17:
+ chk_sums['inner_udp'] = hex(inner[UDP].chksum)
+ # scapy can not get sctp checksum, so extracted manually
+ if inner[IPv6].nh == 59:
+ load = str(inner[IPv6].payload)
+ chk_sums['inner_sctp'] = hex((ord(load[8]) << 24) |
+ (ord(load[9]) << 16) |
+ (ord(load[10]) << 8) |
+ (ord(load[11])))
+
+ return chk_sums
+
+ def send_pcap(self):
+ """
+ Send nvgre pcap file by tester_tx_iface
+ """
+ self.test_case.tester.scapy_append('pcap = rdpcap("%s")' % self.pcap_file)
+ time.sleep(10)
+ self.test_case.tester.scapy_append('sendp(pcap, iface="%s")' % self.test_case.tester_tx_iface)
+ self.test_case.tester.scapy_execute()
+
+ def pcap_len(self):
+ """
+ Return length of pcap packet, will plus 4 bytes crc
+ """
+ # add four bytes crc
+ return len(self.pkt) + 4
+
+
+class TestNvgre(TestCase):
+
+ #
+ #
+ # Utility methods and other non-test code.
+ #
+ # Insert or move non-test functions here.
+ #
+ #
+ #
+ # Test cases.
+ #
+
+ def set_up_all(self):
+ """
+ nvgre Prerequisites
+ """
+ # this feature only enable in FVL now
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit", "fortville_spirit_single"], "NVGRE Only supported by Fortville")
+ # Based on h/w type, choose how many ports to use
+ ports = self.dut.get_ports(self.nic)
+ self.portmask = dts.create_mask(self.dut.get_ports(self.nic))
+
+ # Verify that enough ports are available
+ self.verify(len(ports) >= 2, "Insufficient ports for testing")
+
+ # Verify that enough threads are available
+ self.all_cores_mask = dts.create_mask(self.dut.get_core_list("all"))
+ cores = self.dut.get_core_list("1S/2C/2T")
+ self.verify(cores is not None, "Insufficient cores for speed testing")
+ self.coremask = dts.create_mask(cores)
+
+ # start testpmd
+ self.pmdout = PmdOutput(self.dut)
+
+ # init port
+ self.dut_rx_port = ports[0]
+ self.dut_tx_port = ports[1]
+ self.dut_rx_port_mac = self.dut.get_mac_address(self.dut_rx_port)
+ self.dut_tx_port_mac = self.dut.get_mac_address(self.dut_tx_port)
+
+ self.tester_tx_port = self.tester.get_local_port(self.dut_rx_port)
+ self.tester_tx_iface = self.tester.get_interface(self.tester_tx_port)
+ self.tester_rx_port = self.tester.get_local_port(self.dut_tx_port)
+ self.tester_rx_iface = self.tester.get_interface(self.tester_rx_port)
+
+ # invalid parameter
+ self.invalid_mac = "00:00:00:00:01"
+ self.invalid_ip = "192.168.1.256"
+ self.invalid_vlan = 4097
+ self.invalid_queue = 64
+
+ # performance test cycle
+ self.test_cycles = [
+ {'cores': '1S/1C/1T', 'Mpps': {}, 'pct': {}},
+ {'cores': '1S/1C/2T', 'Mpps': {}, 'pct': {}},
+ {'cores': '1S/2C/1T', 'Mpps': {}, 'pct': {}}
+ ]
+
+ """
+ self.cal_type = [
+ {'Type': 'SOFTWARE ALL', 'tx_checksum': '0x0'},
+ {'Type': 'HW OUTER L3', 'tx_checksum': '0x1'},
+ {'Type': 'HW OUTER L4', 'tx_checksum': '0x2'},
+ {'Type': 'HW OUTER L3&L4', 'tx_checksum': '0x3'},
+ {'Type': 'HW INNER L3', 'tx_checksum': '0x10'},
+ {'Type': 'HW INNER L4', 'tx_checksum': '0x20'},
+ {'Type': 'HW INNER L3&L4', 'tx_checksum': '0x30'},
+ {'Type': 'HARDWARE ALL', 'tx_checksum': '0xff'}
+ ]
+ """
+
+ self.table_header = ['Calculate Type']
+ for test_cycle in self.test_cycles:
+ self.table_header.append("%s Mpps" % test_cycle['cores'])
+ self.table_header.append("% linerate")
+
+ # tunnel filter performance test
+ self.default_vlan = 1
+ self.tunnel_multiqueue = 2
+ self.tunnel_header = ['Packet', 'Filter', 'Queue', 'Mpps', '% linerate']
+ self.tunnel_perf = [
+ {'Packet': 'Normal', 'tunnel_filter': 'None', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'None', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-ivlan', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-ivlan-tenid', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-tenid', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'omac-imac-tenid', 'recvqueue': 'Single', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-ivlan', 'recvqueue': 'Multi', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-ivlan-tenid', 'recvqueue': 'Multi', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac-tenid', 'recvqueue': 'Multi', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'imac', 'recvqueue': 'Multi', 'Mpps': {}, 'pct': {}},
+ {'Packet': 'NVGRE', 'tunnel_filter': 'omac-imac-tenid', 'recvqueue': 'Multi'}
+ ]
+
+ self.ports_socket = self.dut.get_numa_id(self.dut_rx_port)
+
+ def nvgre_detect(self, **kwargs):
+ """
+ send nvgre packet and check whether testpmd detect the correct packet type
+ """
+ out = self.dut.send_expect("./%s/app/testpmd -c %s -n %d -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --portmask=%s --txqflags=0"
+ % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.portmask), "testpmd>", 30)
+ print out
+ out = self.dut.send_expect("set fwd rxonly", "testpmd>", 10)
+ print out
+ self.dut.send_expect("set verbose 1", "testpmd>", 10)
+
+ arg_str = ""
+ for arg in kwargs:
+ arg_str += "[%s = %s]" % (arg, kwargs[arg])
+
+ # create pcap file with supplied arguments
+ self.logger.info("send nvgre pkts %s" % arg_str)
+ config = NvgreTestConfig(self, **kwargs)
+ # now cloud filter will default enable L2 mac filter, so dst mac must be same
+ config.outer_mac_dst = self.dut_rx_port_mac
+ config.create_pcap()
+ # time.sleep(10)
+ config.send_pcap()
+ # check whether detect nvgre type
+ out = self.dut.send_expect("start", "testpmd>", 10)
+ print out
+ self.verify(config.packet_type() in out, "Nvgre Packet not detected")
+ out = self.dut.send_expect("show port stats all", "testpmd>", 10)
+ print out
+ out = self.dut.send_expect("stop", "testpmd>", 10)
+ self.dut.send_expect("quit", "#", 10)
+
+ def nvgre_filter(self, filter_type="omac-imac-tenid", queue_id=1, vlan=False, remove=False):
+ """
+ send nvgre packet and check whether receive packet in assigned queue
+ """
+ self.dut.send_expect("./%s/app/testpmd -c %s -n %d -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --portmask=%s --txqflags=0"
+ % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.portmask), "testpmd>", 30)
+ self.dut.send_expect("set fwd rxonly", "testpmd>", 10)
+ self.dut.send_expect("set verbose 1", "testpmd>", 10)
+
+ if vlan is not False:
+ config = NvgreTestConfig(self, inner_vlan=vlan)
+ vlan_id = vlan
+ else:
+ config = NvgreTestConfig(self)
+ vlan_id = 1
+
+ # now cloud filter will default enable L2 mac filter, so dst mac must be same
+ config.outer_mac_dst = self.dut_rx_port_mac
+
+ # tunnel_filter add port_id outer_mac inner_mac ip_addr inner_vlan tunnel_type(vxlan|nvgre)
+ # filter_type (imac-ivlan|imac-ivlan-tenid|imac-tenid|imac|omac-imac-tenid|iip) tenant_id queue_num
+
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, vlan_id, filter_type, config.tni, queue_id),
+ "testpmd>", 10)
+ print out
+ # invalid case request to remove tunnel filter
+ if remove is True:
+ queue_id = 0
+ self.dut.send_expect("tunnel_filter rm %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, vlan_id,
+ filter_type, config.tni, queue_id), "testpmd>", 10)
+
+ # send nvgre packet
+ config.create_pcap()
+ config.send_pcap()
+ out = self.dut.send_expect("start", "testpmd>", 10)
+ print out
+ queue = -1
+ pattern = re.compile("- Receive queue=0x(\d)")
+ m = pattern.search(out)
+ if m is not None:
+ queue = m.group(1)
+
+ # verify received in expected queue
+ self.verify(queue_id == int(queue), "invalid receive queue")
+
+ self.dut.send_expect("stop", "testpmd>", 10)
+ self.dut.send_expect("quit", "#", 10)
+
+ def nvgre_checksum(self, **kwargs):
+
+ # create pcap file with supplied arguments
+ args = {}
+ for arg in kwargs:
+ if "invalid" not in arg:
+ args[arg] = kwargs[arg]
+
+ config = NvgreTestConfig(self, **args)
+ # now cloud filter will default enable L2 mac filter, so dst mac must be same
+ config.outer_mac_dst = self.dut_rx_port_mac
+
+ # create abnormal package with wrong checksum
+ config.create_pcap()
+ chksums = config.get_chksums()
+ self.logger.info("chksums_wrong" + str(chksums))
+
+ # start testpmd with 2queue/1port
+ out = self.dut.send_expect("./%s/app/testpmd -c %s -n %d -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --portmask=%s --enable-rx-cksum --txqflags=0"
+ % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.portmask), "testpmd>", 30)
+ print out
+ # enable tx checksum offload
+ self.dut.send_expect("set verbose 1", "testpmd>", 10)
+ self.dut.send_expect("set fwd csum", "testpmd>", 10)
+ self.dut.send_expect("csum set ip hw %d" % (self.dut_tx_port), "testpmd>", 10)
+ self.dut.send_expect("csum set udp hw %d" % (self.dut_tx_port), "testpmd>", 10)
+ self.dut.send_expect("csum set tcp hw %d" % (self.dut_tx_port), "testpmd>", 10)
+ self.dut.send_expect("csum set sctp hw %d" % (self.dut_tx_port), "testpmd>", 10)
+ self.dut.send_expect("csum set outer-ip hw %d" % (self.dut_tx_port), "testpmd>", 10)
+ self.dut.send_expect("csum parse_tunnel on %d" % (self.dut_rx_port), "testpmd>", 10)
+
+ # log the nvgre format
+ arg_str = ""
+ for arg in kwargs:
+ arg_str += "[%s = %s]" % (arg, kwargs[arg])
+
+ self.logger.info("nvgre packet %s" % arg_str)
+
+ out = self.dut.send_expect("start", "testpmd>", 10)
+
+ # remove tempory files
+ self.tester.send_expect("rm -rf /root/%s" % config.capture_file, "# ")
+ # save the capture packet into pcap format
+ self.tester.scapy_background()
+ self.tester.scapy_append('p=sniff(iface="%s",count=1,timeout=5)' % self.tester_rx_iface)
+ self.tester.scapy_append('wrpcap(\"/root/%s\", p)' % config.capture_file)
+ self.tester.scapy_foreground()
+
+ config.send_pcap()
+ time.sleep(5)
+
+ out = self.dut.send_expect("show port stats all", "testpmd>", 10)
+ print out
+ # extract the checksum offload from saved pcap file
+ chksums = config.get_chksums(pcap=config.capture_file, tester=True)
+ os.remove(config.capture_file)
+ self.logger.info("chksums" + str(chksums))
+
+ out = self.dut.send_expect("stop", "testpmd>", 10)
+
+ # create correct package with normal checksum
+ config = NvgreTestConfig(self, **kwargs)
+ config.outer_ip_invalid = 0
+ config.outer_ip6_invalid = 0
+ config.inner_ip_invalid = 0
+ config.inner_ip6_invalid = 0
+ config.inner_l4_invalid = 0
+ config.outer_ip_src = config.outer_ip_dst
+ config.outer_ip6_src = config.outer_ip6_dst
+
+ config.create_pcap()
+ chksums_default = config.get_chksums()
+ self.logger.info("chksums_default" + str(chksums_default))
+
+ '''
+ # verify detected l4 invalid checksum
+ if "inner_l4_invalid" in kwargs and config.inner_l4_type is not 'UDP':
+ self.verify(self.pmdout.get_pmd_value("Bad-l4csum:", out) == 1, "Failed to count inner l4 chksum error")
+
+ # verify detected l3 invalid checksum
+ if "inner_ip_invalid" in kwargs:
+ self.verify(self.pmdout.get_pmd_value("Bad-ipcsum:", out) == 1, "Failed to count inner ip chksum error")
+ '''
+
+ self.dut.send_expect("quit", "#", 10)
+
+ # verify saved pcap checksum same to expected checksum
+ for key in chksums_default:
+ self.verify(chksums[key] == chksums_default[key], "%s not matched to %s" % (key, chksums_default[key]))
+
+ def test_nvgre_ipv4(self):
+ """
+ verify nvgre packet with ipv4
+ """
+ # check no nvgre packet
+ self.nvgre_detect(outer_ip_proto=0xFF)
+ # check nvgre + IP inner packet
+ self.nvgre_detect(inner_l3_type="IPv4", inner_l4_type='None')
+ # check nvgre + udp inner packet
+ self.nvgre_detect(inner_l4_type='TCP')
+ # check nvgre + SCTP inner packet
+ # self.nvgre_detect(inner_l4_type='SCTP')
+ # check nvgre + vlan inner packet
+ self.nvgre_detect(outer_vlan=1)
+ # check vlan nvgre + vlan inner packet
+ self.nvgre_detect(outer_vlan=1, inner_vlan=1)
+
+ def test_nvgre_ipv6(self):
+
+ # check no nvgre packet
+ self.nvgre_detect(outer_l3_type="IPv6",
+ outer_ip_proto=0xFF,
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1")
+ # check ipv6 nvgre + UDP inner packet
+ self.nvgre_detect(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l4_type='UDP')
+ # check ipv6 nvgre + TCP inner packet
+ self.nvgre_detect(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l4_type='TCP')
+ # check ipv6 nvgre + SCTP inner packet
+ """
+ self.nvgre_detect(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l4_type='SCTP')
+ """
+
+ def test_tunnel_filter(self):
+
+ # verify tunnel filter feature
+ # check outer mac
+ self.nvgre_filter(filter_type="omac-imac-tenid")
+ # check inner mac + inner vlan filter can work
+ self.nvgre_filter(filter_type="imac-ivlan", vlan=1)
+ # check inner mac + inner vlan + tunnel id filter can work
+ self.nvgre_filter(filter_type="imac-ivlan-tenid", vlan=1)
+ # check inner mac + tunnel id filter can work
+ self.nvgre_filter(filter_type="imac-tenid")
+ # check inner mac filter can work
+ self.nvgre_filter(filter_type="imac")
+ # check outer mac + inner mac + tunnel id filter can work
+ self.nvgre_filter(filter_type="omac-imac-tenid")
+ # check iip filter can work
+ # self.nvgre_filter(filter_type="iip")
+
+ def test_tunnel_filter_invalid(self):
+ # verify tunnel filter parameter check function
+
+ # invalid parameter
+ vlan_id = 1
+ filter_type = 'omac-imac-tenid'
+ queue_id = 3
+
+ self.nvgre_filter(filter_type="imac", remove=True)
+ config = NvgreTestConfig(self)
+ # config.outer_mac_dst = self.dut_port_mac
+ self.dut.send_expect("./%s/app/testpmd -c %s -n %d -- -i --disable-rss --rxq=4 --txq=4 --nb-cores=8 --portmask=%s --txqflags=0"
+ % (self.target, self.all_cores_mask, self.dut.get_memory_channels(), self.portmask), "testpmd>", 30)
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, self.invalid_mac, config.inner_ip_dst, vlan_id,
+ filter_type, config.tni, queue_id), "testpmd>", 10)
+ self.verify("Bad arguments" in out, "Failed to detect invalid mac")
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, config.inner_mac_dst, self.invalid_ip, vlan_id,
+ filter_type, config.tni, queue_id), "testpmd>", 10)
+ self.verify("Bad arguments" in out, "Failed to detect invalid ip")
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, self.invalid_vlan,
+ filter_type, config.tni, queue_id), "testpmd>", 10)
+ self.verify("Input/output error" in out, "Failed to detect invalid vlan")
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d nvgre %s %d %d"
+ % (self.dut_rx_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, vlan_id,
+ filter_type, config.tni, self.invalid_queue), "testpmd>", 10)
+ self.verify("Input/output error" in out, "Failed to detect invalid queue")
+
+ self.dut.send_expect("stop", "testpmd>", 10)
+ self.dut.send_expect("quit", "#", 10)
+
+ def test_nvgre_ipv4_checksum_offload(self):
+ # check normal packet
+ self.nvgre_checksum()
+ # check normal packet + ip checksum invalid
+ self.nvgre_checksum(outer_ip_invalid=1)
+ # check nvgre packet + inner ip checksum invalid
+ self.nvgre_checksum(inner_ip_invalid=1)
+ # check nvgre packet + outer ip checksum invalid
+ self.nvgre_checksum(outer_ip_invalid=1)
+ # check nvgre packet + outer ip + inner ip checksum invalid
+ self.nvgre_checksum(outer_ip_invalid=1, inner_ip_invalid=1)
+ # check nvgre packet + inner udp checksum invalid
+ self.nvgre_checksum(inner_l4_invalid=1)
+ # check nvgre packet + inner tcp checksum invalid
+ self.nvgre_checksum(inner_l4_invalid=1, inner_l4_type='TCP')
+ # check nvgre packet + inner sctp checksum invalid
+ # self.nvgre_checksum(inner_l4_invalid=1, inner_l4_type='SCTP')
+ # check vlan nvgre packet + outer ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, outer_ip_invalid=1)
+ # check vlan nvgre packet + inner ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_ip_invalid=1)
+ # check vlan nvgre packet + outer&inner ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, outer_ip_invalid=1, inner_ip_invalid=1)
+ # check vlan nvgre packet + inner vlan + outer ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_vlan=1, outer_ip_invalid=1)
+ # check vlan nvgre packet + inner vlan + inner ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_vlan=1, inner_ip_invalid=1)
+ # check vlan nvgre packet + inner vlan + outer&inner ip checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_vlan=1, outer_ip_invalid=1, inner_ip_invalid=1)
+ # check vlan nvgre packet + inner vlan + inner udp checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_l4_invalid=1, inner_l4_type='UDP')
+ # check vlan nvgre packet + inner vlan + inner tcp checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_l4_invalid=1, inner_l4_type='TCP')
+ # check vlan nvgre packet + inner vlan + inner sctp checksum invalid
+ self.nvgre_checksum(outer_vlan=1, inner_l4_invalid=1, inner_l4_type='SCTP')
+
+ def nvgre_ipv6_checksum_offload(self):
+
+ # verify nvgre packet checksum offload with ipv6 header
+ # not support ipv6 + sctp
+
+ # check normal ipv6 packet + ip checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ outer_udp_dst=1234)
+ # check ipv6 nvgre packet + inner ip checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_ip_invalid=1)
+ # check ipv6 nvgre packet + inner udp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l4_invalid=1, inner_l4_type='UDP')
+ # check ipv6 nvgre packet + outer udp checksum invalid
+ self.nvgre_checksum(inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ outer_udp_invalid=1)
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1")
+ # check ipv6 nvgre packet + inner udp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='UDP')
+ # check ipv6 nvgre packet + inner tcp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='TCP')
+ # check ipv6 vlan nvgre packet + inner udp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='UDP',
+ outer_vlan=1)
+ # check ipv6 vlan nvgre packet + inner tcp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='TCP',
+ outer_vlan=1)
+ # check ipv6 vlan nvgre packet + vlan + inner udp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='UDP',
+ outer_vlan=1, inner_vlan=1)
+ # check ipv6 vlan nvgre packet + vlan + inner tcp checksum invalid
+ self.nvgre_checksum(outer_l3_type="IPv6",
+ outer_ip6_src="FE80:0:0:0:0:0:0:0",
+ outer_ip6_dst="FE80:0:0:0:0:0:0:1",
+ inner_l3_type="IPv6",
+ inner_ip6_src="FE80:0:0:0:0:0:1:0",
+ inner_ip6_dst="FE80:0:0:0:0:0:1:1",
+ inner_l4_invalid=1, inner_l4_type='TCP',
+ outer_vlan=1, inner_vlan=1)
+
+ def test_perf_nvgre_tunnelfilter_performance_2ports(self):
+ dts.results_table_add_header(self.tunnel_header)
+ core_list = self.dut.get_core_list('1S/%dC/1T' % (self.tunnel_multiqueue * 2), socket=self.ports_socket)
+ core_mask = dts.create_mask(core_list)
+
+ command_line = "./%s/app/testpmd -c %s -n %d -- -i --disable-rss --coremask=%s --rxq=4 --txq=4 --portmask=%s" % (self.target,
+ self.all_cores_mask,
+ self.dut.get_memory_channels(),
+ core_mask, self.portmask)
+ for perf_config in self.tunnel_perf:
+ pkts = []
+ config = NvgreTestConfig(self)
+ config.inner_vlan = self.default_vlan
+ config.outer_mac_dst = self.dut.get_mac_address(self.dut_port)
+ # get frame size
+ config.create_pcap(scp=False)
+ frame_size = config.pcap_len()
+
+ # restart testpmd in each performance config
+ self.dut.send_expect(command_line, "testpmd> ", 100)
+ if perf_config['tunnel_filter'] != 'None':
+ self.dut.send_expect("tunnel_filter add %d %s %s %s %d vxlan %s %d %d"
+ % (self.dut_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, config.inner_vlan,
+ perf_config['tunnel_filter'], config.tni, 0), "testpmd>", 10)
+
+ if perf_config['Packet'] == 'Normal':
+ config.outer_udp_dst = 63
+ config.outer_mac_dst = self.dut.get_mac_address(self.dut_port)
+ config.payload_size = frame_size - HEADER_SIZE['eth'] - HEADER_SIZE['ip'] - HEADER_SIZE['udp']
+
+ # add default pkt into pkt list
+ pkt = config.create_pcap(scp=False)
+ pkts.append(pkt)
+
+ # add other pkts into pkt list when enable multi receive queues
+ if perf_config['recvqueue'] == 'Multi':
+ for queue in range(self.tunnel_multiqueue - 1):
+ if 'imac' in perf_config['tunnel_filter']:
+ config.inner_mac_dst = "00:00:20:00:00:0%d" % (queue + 2)
+ if 'ivlan' in perf_config['tunnel_filter']:
+ config.inner_vlan = (queue + 2)
+ if 'tenid' in perf_config['tunnel_filter']:
+ config.vni = (queue + 2)
+
+ # add tunnel filter the same as pkt
+ pkt = config.create_pcap(scp=False)
+ pkts.append(pkt)
+ out = self.dut.send_expect("tunnel_filter add %d %s %s %s %d vxlan %s %d %d"
+ % (self.dut_port, config.outer_mac_dst, config.inner_mac_dst, config.inner_ip_dst, config.inner_vlan,
+ perf_config['tunnel_filter'], config.vni, (queue + 1)), "testpmd>", 10)
+
+ # save pkt list into pcap file
+ wrpcap(config.pcap_file, pkts)
+ self.tester.session.copy_file_to(config.pcap_file)
+
+ # config the flows
+ tgen_input = []
+ tgen_input.append((self.tester.get_local_port(self.dut_port),
+ self.tester.get_local_port(self.recv_port),
+ config.pcap_file))
+
+ self.dut.send_expect("set fwd mac", "testpmd>", 10)
+ self.dut.send_expect("start", "testpmd>", 10)
+
+ frame_size = config.pcap_len()
+ wirespeed = self.wirespeed(self.nic, frame_size, 2)
+ # run traffic generator
+ _, pps = self.tester.traffic_generator_throughput(tgen_input)
+
+ pps /= 1000000.0
+ perf_config['Mpps'] = pps
+ perf_config['pct'] = pps * 100 / wirespeed
+
+ out = self.dut.send_expect("stop", "testpmd>", 10)
+ self.dut.send_expect("quit", "# ", 10)
+
+ # verify every queue work fine
+ if perf_config['recvqueue'] == 'Multi':
+ for queue in range(self.tunnel_multiqueue):
+ self.verify("RX Port= 0/Queue= %d -> TX Port= 1/Queue= %d" % (queue, queue) in out, "Queue %d no traffic" % queue)
+
+ table_row = [perf_config['Packet'], perf_config['tunnel_filter'],
+ perf_config['recvqueue'], perf_config['Mpps'],
+ perf_config['pct']]
+
+ dts.results_table_add_row(table_row)
+
+ dts.results_table_print()
+
+ def test_perf_nvgre_checksum_performance_2ports(self):
+ config = NvgreTestConfig(self)
+ config.outer_mac_dst = self.dut.get_mac_address(self.dut_port)
+ config.pcap_file = "vxlan1.pcap"
+ config.create_pcap()
+ config.outer_mac_dst = self.dut.get_mac_address(self.recv_port)
+ config.pcap_file = "vxlan2.pcap"
+ config.create_pcap()
+
+ # configure flows
+ tgen_input = []
+ tgen_input.append((self.tester.get_local_port(self.dut_port),
+ self.tester.get_local_port(self.recv_port),
+ "vxlan1.pcap"))
+ tgen_input.append((self.tester.get_local_port(self.recv_port),
+ self.tester.get_local_port(self.dut_port),
+ "vxlan2.pcap"))
+
+ all_cores_mask = dts.create_mask(self.dut.get_core_list("all"))
+
+ # socket/core/thread
+ for test_cycle in self.test_cycles:
+ core_config = test_cycle['cores']
+
+ # take care the corelist when enable numa
+ if '2S' not in core_config:
+ core_list = self.dut.get_core_list(core_config,
+ socket=self.ports_socket)
+ else:
+ core_list = self.dut.get_core_list(core_config)
+
+ core_mask = dts.create_mask(core_list)
+
+ command_line = "./%s/app/testpmd -c %s -n %d -- -i \
+ --disable-rss --coremask=%s --portmask=%s" % (self.target,
+ all_cores_mask,
+ self.dut.get_memory_channels(),
+ core_mask, self.portmask)
+
+ self.dut.send_expect(command_line, "testpmd> ", 100)
+ self.dut.send_expect("set fwd csum", "testpmd>", 10)
+
+ # different calculate type
+ for cal in self.cal_type:
+ self.dut.send_expect("tx_checksum set %s %d" % (cal['tx_checksum'], self.dut_port), "testpmd>", 10)
+ self.dut.send_expect("tx_checksum set %s %d" % (cal['tx_checksum'], self.recv_port), "testpmd>", 10)
+ self.dut.send_expect("start", "testpmd>", 10)
+
+ frame_size = config.pcap_len()
+ wirespeed = self.wirespeed(self.nic, frame_size, 2)
+ # run traffic generator
+ _, pps = self.tester.traffic_generator_throughput(tgen_input)
+
+ pps /= 1000000.0
+ test_cycle['Mpps'][cal['Type']] = pps
+ test_cycle['pct'][cal['Type']] = pps * 100 / wirespeed
+
+ self.dut.send_expect("stop", "testpmd>", 10)
+
+ self.dut.send_expect("quit", "# ", 10)
+
+ dts.results_table_add_header(self.table_header)
+
+ # save the results
+ for cal in self.cal_type:
+ table_row = [cal['Type']]
+ for test_cycle in self.test_cycles:
+ table_row.append(test_cycle['Mpps'][cal['Type']])
+ table_row.append(test_cycle['pct'][cal['Type']])
+
+ dts.results_table_add_row(table_row)
+
+ dts.results_table_print()
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [dts] [PATCH V3 3/4] add nvgre protocol for scapy
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
` (2 preceding siblings ...)
2015-06-16 5:32 ` [dts] [PATCH V3 4/4] add nvgre test code huilong,xu
@ 2015-06-16 5:32 ` huilong,xu
2015-06-16 5:56 ` [dts] [PATCH V3 1/4] add nvgre test for fortville NIC Liu, Yong
4 siblings, 0 replies; 6+ messages in thread
From: huilong,xu @ 2015-06-16 5:32 UTC (permalink / raw)
To: dts
From: huilong xu <huilongx.xu@intel.com>
used function:
1. copy ./dep/nvgre.py to fedor layers in python install path
eg: python2.7 default path: /usr/lib/python2.7/site-packages/scapy/layers/
2. update scapy config file
add "nvgre" to vlaue "load_layers" in scapy config file.
eg: python2.7 default config file: /usr/lib/python2.7/site-packages/scapy/config.py
Signed-off-by: huilong xu <huilongx.xu@intel.com>
---
dep/nvgre.py | 33 +++++++++++++++++++++++++++++++++
1 files changed, 33 insertions(+), 0 deletions(-)
create mode 100644 dep/nvgre.py
diff --git a/dep/nvgre.py b/dep/nvgre.py
new file mode 100644
index 0000000..d844bd1
--- /dev/null
+++ b/dep/nvgre.py
@@ -0,0 +1,33 @@
+## This file is part of Scapy
+##
+## Copyright (C) Min Cao <min.cao@intel.com>
+
+"""
+NVGRE (Network Virtual GRE).
+"""
+
+from scapy.packet import *
+from scapy.fields import *
+from scapy.layers.inet import UDP,IP
+from scapy.layers.l2 import Ether
+
+IPPROTO_NVGRE=47
+
+class NVGRE(Packet):
+ name = "Network Virtual GRE"
+ fields_desc = [BitField("c", 0, 1),
+ BitField("r", 0, 1),
+ BitField("k", 1, 1),
+ BitField("s", 0, 1),
+ BitField("reserved0", 0, 9),
+ BitField("ver", 0, 3),
+ XShortField("protocoltype", 0x6558),
+ X3BytesField("TNI", 1),
+ ByteField("reserved1", 0)]
+ def mysummary(self):
+ return self.sprintf("NVGRE (tni=%NVGRE.tni%)")
+
+
+bind_layers(IP, NVGRE, proto=IPPROTO_NVGRE)
+bind_layers(NVGRE, Ether)
+
--
1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dts] [PATCH V3 1/4] add nvgre test for fortville NIC
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
` (3 preceding siblings ...)
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
@ 2015-06-16 5:56 ` Liu, Yong
4 siblings, 0 replies; 6+ messages in thread
From: Liu, Yong @ 2015-06-16 5:56 UTC (permalink / raw)
To: Xu, HuilongX, dts
Thanks, applied in 1.1 branch.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of huilong,xu
> Sent: Tuesday, June 16, 2015 1:33 PM
> To: dts@dpdk.org
> Subject: [dts] [PATCH V3 1/4] add nvgre test for fortville NIC
>
> From: huilong xu <huilongx.xu@intel.com>
>
>
> Signed-off-by: huilong xu <huilongx.xu@intel.com>
> ---
> executions/execution_FVL.cfg | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/executions/execution_FVL.cfg b/executions/execution_FVL.cfg
> index 600c693..5201420 100644
> --- a/executions/execution_FVL.cfg
> +++ b/executions/execution_FVL.cfg
> @@ -9,7 +9,8 @@ test_suites=
> vlan,
> shutdown_api,
> queue_start_stop,
> - fdir
> + fdir,
> + nvgre
> targets=
> x86_64-native-linuxapp-gcc
> parameters=nic_type=cfg:func=true
> --
> 1.7.4.4
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-06-16 5:56 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-16 5:32 [dts] [PATCH V3 1/4] add nvgre test for fortville NIC huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 2/4] add nvgre test plan huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 4/4] add nvgre test code huilong,xu
2015-06-16 5:32 ` [dts] [PATCH V3 3/4] add nvgre protocol for scapy huilong,xu
2015-06-16 5:56 ` [dts] [PATCH V3 1/4] add nvgre test for fortville NIC Liu, Yong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).