Re: [dts] [PATCH]fix: set 100g ixia configuration disable

["Liu, Yong" <yong.liu@intel.com>]

Applied. Thanks.

> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of Qian Xu
> Sent: Monday, March 07, 2016 4:57 PM
> To: dts@dpdk.org
> Subject: [dts] [PATCH]fix: set 100g ixia configuration disable
> 
> This patch fix an issue that if the ixia.cfg doesn't set the enable_rsfec.
> 1. Change the enable_rsfec to force100g for better understanding.
> 2. Set force100g disable if user didn't set the value in config file.
> 
> Signed-off-by: Qian Xu <qian.q.xu@intel.com>
> 
> diff --git a/conf/ixia.cfg b/conf/ixia.cfg
> index 8874801..9deba60 100644
> --- a/conf/ixia.cfg
> +++ b/conf/ixia.cfg
> @@ -3,7 +3,7 @@
>  # Version  : IXIA TCL server version
>  # IP       : IXIA server IP address
>  # Ports    : [IXIA port list]
> -# ixia_enable_rsfec: We need to set this to enable if we need IXIA port
> work in 100G mode.
> +# ixia_force100g: We need to set this to enable if we need IXIA port
> work in 100G mode.
>  [IXIA Group]
>  ixia_version=6.62
>  ixia_ip=xxx.xxx.xxx.xxx
> @@ -12,4 +12,4 @@ ixia_ports=
>      card=1,port=2;
>      card=1,port=3;
>      card=1,port=4;
> -ixia_enable_rsfec=disable
> +ixia_force100g=disable
> diff --git a/framework/etgen.py b/framework/etgen.py
> index e272fd6..081155c 100644
> --- a/framework/etgen.py
> +++ b/framework/etgen.py
> @@ -155,7 +155,11 @@ class IxiaPacketGenerator(SSHConnection):
> 
>          self.ixiaVersion = ixiaPorts[ixiaRef]["Version"]
>          self.ports = ixiaPorts[ixiaRef]["Ports"]
> -        self.enable_rsfec = ixiaPorts[ixiaRef]['enable_rsfec']
> +
> +        if ixiaPorts[ixiaRef].has_key('force100g'):
> +            self.enable100g = ixiaPorts[ixiaRef]['force100g']
> +        else:
> +            self.enable100g = 'disable'
> 
>          self.logger.info(self.ixiaVersion)
>          self.logger.info(self.ports)
> @@ -414,7 +418,7 @@ class IxiaPacketGenerator(SSHConnection):
>                  item['card'], item['port']))
>              #if the line rate is 100G and we need this port work in 100G
> mode,
>              #we need to add some configure to make it so.
> -            if int(self.get_line_rate(self.chasId, item).strip()) ==
> 100000 and self.enable_rsfec == 'enable':
> +            if int(self.get_line_rate(self.chasId, item).strip()) ==
> 100000 and self.enable100g == 'enable':
>                  self.add_tcl_cmd("port config -ieeeL1Defaults 0")
>                  self.add_tcl_cmd("port config -autonegotiate false")
>                  self.add_tcl_cmd("port config -enableRsFec true")
> --
> 2.1.0