From: "Liu, Yong" <yong.liu@intel.com>
To: "Xu, GangX" <gangx.xu@intel.com>, "dts@dpdk.org" <dts@dpdk.org>
Cc: "Xu, GangX" <gangx.xu@intel.com>
Subject: Re: [dts] [PATCH V1 1/4] add rxtx_callbacks code
Date: Fri, 29 Apr 2016 18:19:15 +0000 [thread overview]
Message-ID: <86228AFD5BCD8E4EBFD2B90117B5E81E14F0B1D1@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <1461918263-32864-1-git-send-email-gangx.xu@intel.com>
Gang, few comments below.
> -----Original Message-----
> From: dts [mailto:dts-bounces@dpdk.org] On Behalf Of xu,gang
> Sent: Friday, April 29, 2016 1:24 AM
> To: dts@dpdk.org
> Cc: Xu, GangX
> Subject: [dts] [PATCH V1 1/4] add rxtx_callbacks code
>
> Signed-off-by: xu,gang <gangx.xu@intel.com>
> ---
> tests/TestSuite_rxtx_callbacks.py | 116
> ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 116 insertions(+)
> create mode 100644 tests/TestSuite_rxtx_callbacks.py
>
> diff --git a/tests/TestSuite_rxtx_callbacks.py
> b/tests/TestSuite_rxtx_callbacks.py
> new file mode 100644
> index 0000000..6da402d
> --- /dev/null
> +++ b/tests/TestSuite_rxtx_callbacks.py
> @@ -0,0 +1,116 @@
> +#BSD LICENSE
> +#
> +# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without
> +# modification, are permitted provided that the following conditions
> +# are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Test Netmap_compat.
Netmap should not be here.
> +"""
> +import dts
> +import string
> +import time
> +from test_case import TestCase
> +from plotting import Plotting
> +from settings import HEADER_SIZE
> +from etgen import IxiaPacketGenerator
> +
> +from packet import Packet, sniff_packets, load_sniff_packets
> +
> +
> +class TestRxtxCallbacks(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + timer prerequistites
> + """
> + self.dut_ports = self.dut.get_ports(self.nic)
> + self.verify(len(self.dut_ports) >= 2, "Insufficient ports")
> +
> + cores = self.dut.get_core_list("1S/2C/1T")
> + self.coremask = dts.create_mask(cores)
> +
> + self.mac = self.dut.get_mac_address(self.dut_ports[0])
> + self.path = "./examples/rxtx_callbacks/build/rxtx_callbacks"
> +
> + out = self.dut.build_dpdk_apps("./examples/rxtx_callbacks")
> + self.verify("Error" not in out, "compilation error 1")
> + self.verify("No such file" not in out, "compilation error 2")
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + pass
> +
> + def test_rxtx_callbacks(self):
> + cmd = self.path + " -c %s -n %d " %
> (self.coremask,self.dut.get_memory_channels())
> + self.dut.send_expect(cmd,"forwarding packets",60)
> +
> + self.iface_port0 =
> self.tester.get_interface(self.tester.get_local_port(self.dut_ports[0]))
> + self.iface_port1 =
> self.tester.get_interface(self.tester.get_local_port(self.dut_ports[1]))
> +
> + self.inst_port1 = sniff_packets(self.iface_port1)
> + self.scapy_send_package(self.iface_port0)
> +
> + out_port1 = self.get_tcpdump_package(self.inst_port1)
> + self.verify(self.mac in out_port1, "Wrong: can't get package
> at %s " % self.inst_port1)
> +
> +
> + def scapy_send_package(self,iface):
> + """
> + Send a packet to port
> + """
Typo issue, package should be packet.
> +
> self.tester.scapy_append('sendp([Ether(dst="%s")/IP()/UDP()/Raw(\'X\'*18)],
> iface="%s")' % (self.mac, iface))
> + self.tester.scapy_execute()
> +
You can use packet module send_pkt function for sending packets.
> + def get_tcpdump_package(self,inst):
> + pkts = load_sniff_packets(inst)
> + dsts = []
> + for packet in pkts:
> + dst = packet.strip_element_layer2("dst")
> + dsts.append(dst)
> + return dsts
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.kill_all()
> + time.sleep(2)
> +
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> + pass
> +
> --
> 1.9.3
prev parent reply other threads:[~2016-04-29 18:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-29 8:24 xu,gang
2016-04-29 8:24 ` [dts] [PATCH V12/4] add rxtx_callbacks test plan xu,gang
2016-04-29 8:24 ` [dts] [PATCH v13/4] add skeleton code xu,gang
2016-04-29 8:24 ` [dts] [PATCH V1 4/4] add skeleton test plan xu,gang
2016-04-29 18:19 ` Liu, Yong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86228AFD5BCD8E4EBFD2B90117B5E81E14F0B1D1@SHSMSX103.ccr.corp.intel.com \
--to=yong.liu@intel.com \
--cc=dts@dpdk.org \
--cc=gangx.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).